sh: migor board support
PATCH 1/1 sh: migor board support
This patch adds basic support for the Migo-R board.
Only simple stuff provided by the cpu specific sh7722 code is in place now, like serial console port, timers and usb gadget. There is also partial support for the smc91c111 ethernet controller - unfortunately some driver header file also needs patching (not included here) to make the driver get IRQ sense information from the platform data.
---
arch/sh/Kconfig | 7 arch/sh/Makefile | 1 arch/sh/boards/renesas/migor/Makefile | 1 arch/sh/boards/renesas/migor/setup.c | 61 ++ arch/sh/configs/migor_defconfig | 824 +++++++++++++++++++++++++++++++++ 5 files changed, 894 insertions(+)
arch/sh/Kconfig +7 -0
@@ -474,6 +474,13 @@ config SH_HIGHLANDER select SYS_SUPPORTS_PCI select IO_TRAPPED +config SH_MIGOR + bool "Migo-R" + depends on CPU_SUBTYPE_SH7722 + help + Select Migo-R if configuring for the SH7722 Migo-R platform + by Renesas System Solutions Asia Pte. Ltd. + config SH_EDOSK7705 bool "EDOSK7705" depends on CPU_SUBTYPE_SH7705
arch/sh/Makefile +1 -0
@@ -116,6 +116,7 @@ machdir-$(CONFIG_SH_RTS7751R2D) += ren machdir-$(CONFIG_SH_7751_SYSTEMH) += renesas/systemh machdir-$(CONFIG_SH_EDOSK7705) += renesas/edosk7705 machdir-$(CONFIG_SH_HIGHLANDER) += renesas/r7780rp +machdir-$(CONFIG_SH_MIGOR) += renesas/migor machdir-$(CONFIG_SH_SDK7780) += renesas/sdk7780 machdir-$(CONFIG_SH_7710VOIPGW) += renesas/sh7710voipgw machdir-$(CONFIG_SH_X3PROTO) += renesas/x3proto
arch/sh/boards/renesas/migor/Makefile new file +1 -0
@@ -0,0 +1 @@ +obj-y := setup.o
arch/sh/boards/renesas/migor/setup.c new file +61 -0
61 lines not on this page · raw message
arch/sh/configs/migor_defconfig new file +824 -0
824 lines not on this page · raw message
Quoted 9 lines · Magnus Damm
This patch adds basic support for the Migo-R board.
Only simple stuff provided by the cpu specific sh7722 code is in place now, like serial console port, timers and usb gadget. There is also partial support for the smc91c111 ethernet controller - unfortunately some driver header file also needs patching (not included here) to make the driver get IRQ sense information from the platform data.
Signed-off-by Magnus Damm <[email protected]>
Applied also, thanks.