Skip to contentSkip to conversation

Trivial patch to Documentation/i386/IO-APIC.txt

PATCH Nick Andrew 1 participant 1 message Feb 12, 2008 Documentation

lore
Share & tools
lore
#0 lore raw

The description of the interrupt routing doesn't match the (nice) diagram.

Nick.

Documentation/i386/IO-APIC.txt +1 -1
@@ -68,7 +68,7 @@
 
 These INTA-D PCI IRQs are always 'local to the card', their real meaning
 depends on which slot they are in. If you look at the daisy chaining diagram,
-a card in slot4, issuing INTA IRQ, it will end up as a signal on PIRQ2 of
+a card in slot4, issuing INTA IRQ, it will end up as a signal on PIRQ4 of
 the PCI chipset. Most cards issue INTA, this creates optimal distribution
 between the PIRQ lines. (distributing IRQ sources properly is not a
 necessity, PCI IRQs can be shared at will, but it's a good for performance