Configure out doublefault exception handler (Linux Tiny)
PATCH 1/1 Configure out doublefault exception handler (Linux Tiny)
Hi,
Enclosed patch allows to configure out the doublefault exception handler. The original patch of Matt Mackall added the option in init/Kconfig, but because this is a x86-specific thing, I thought arch/x86/Kconfig would be a better place. Is that correct ?
This patch applies on top on the DMI scanning code patch I've sent yesterday, because the DOUBLEFAULT config option is right after the DMI config option. Is that ok, or should I propose a patch on top of a vanilla 2.6.25-rc1 ?
Thanks for your review and comments,
Thomas
---
This patch adds the ability to disable the doublefault exception handler, in order to save some kernel space. The doublefault exception handler was already conditionnaly compiled using CONFIG_DOUBLEFAULT, but there was no way to change the value of this configuration option. The option is only visible if CONFIG_EMBEDDED is selected, in order to not confuse other users.
The kernel space savings are as follows:
text data bss dec hex filename
1076076 128656 98304 1303036 13e1fc vmlinux.before 1075772 119952 94208 1289932 13aecc vmlinux.after -304 -8704 -4096 -13104 -3330 +/-
This patch is part of the Linux Tiny project, and is based on previous work by Matt Mackall <[email protected]>.
--- arch/x86/Kconfig | 7 +++++++ 1 file changed, 7 insertions(+)
arch/x86/Kconfig +7 -0
@@ -439,6 +439,13 @@ affected by entries in the DMI blacklist. Required by PNP BIOS code. +config DOUBLEFAULT + default y + bool "Enable doublefault exception handler" if EMBEDDED + help + This option allows trapping of rare doublefault exceptions + that would otherwise cause a system to silently reboot. + config GART_IOMMU bool "GART IOMMU support" if EMBEDDED default y
Signature · 4 lines
Thomas Petazzoni, [email protected], http://thomas.enix.org Jabber, [email protected] Toulibre, http://www.toulibre.org - APRIL, http://www.april.org Fingerprint : 0BE1 4CF3 CEA4 AC9D CC6E 1624 F653 CB30 98D3 F7A7
Quoted 7 lines · Thomas Petazzoni
Hi,
Enclosed patch allows to configure out the doublefault exception handler. The original patch of Matt Mackall added the option in init/Kconfig, but because this is a x86-specific thing, I thought
arch/x86/Kconfigwould be a better place. Is that correct ?
Quoted 6 lines
This patch applies on top on the DMI scanning code patch I've sent yesterday, because the DOUBLEFAULT config option is right after the DMI config option. Is that ok, or should I propose a patch on top of a vanilla 2.6.25-rc1 ?
Thanks for your review and comments,
We already have this in arch/x86/Kconfig.debug:
config DOUBLEFAULT
default y
bool "Enable doublefault exception handler" if EMBEDDED depends on X86_32
help
This option allows trapping of rare doublefault exceptions that would otherwise cause a system to silently reboot. Disabling this option saves about 4k and might cause you much additional grey hair.
It may need a small update if this is valid for both 32 and 64 bit.
Sam
Hi Sam,
Quoted 1 line · Sam Ravnborg
We already have this in
arch/x86/Kconfig.debug:
Oops, my usual "find . -name Kconfig" missed it. Thanks for pointing it out!
Quoted 1 line
It may need a small update if this is valid for both 32 and 64 bit.
Doesn't seem so: there's only a doublefault_32.c, no doublefault_64.c. However, I don't know the details of x86_64.
Thanks,
Thomas
Signature · 4 lines
Thomas Petazzoni, Free Electrons Free Embedded Linux Training Materials on http://free-electrons.com/training (More than 1500 pages!)
Quoted 9 lines · Thomas Petazzoni
Hi Sam,
Quoted 1 line · Sam Ravnborg
We already have this in
arch/x86/Kconfig.debug:Oops, my usual "find . -name
Kconfig" missed it. Thanks for pointing it out!
The fact that you didn't have to add any makefile bits should have been a hint.
Quoted 4 lines
Quoted 1 line
It may need a small update if this is valid for both 32 and 64 bit.
Doesn't seem so: there's only a
doublefault_32.c, nodoublefault_64.c. However, I don't know the details ofx86_64.
I bet there's some doublefault-handling code hiding somewhere. It's not the sort of thing it'd make sense to take out of the architecture.
Signature · 1 line
Mathematics is the supreme nostalgia of our time.
Quoted 3 lines · Matt Mackall
I bet there's some doublefault-handling code hiding somewhere. It's not the sort of thing it'd make sense to take out of the architecture.
The big question is if it makes sense taking out of a kernel at all. I still think the answer is no.
Or have you considered replacing die() and show_trace() etc. with a single panic("the tiny gods say this won't happen") yet? That would be roughly equivalent.
-Andi
Quoted 11 lines · Andi Kleen
Quoted 3 lines · Matt Mackall
I bet there's some doublefault-handling code hiding somewhere. It's not the sort of thing it'd make sense to take out of the architecture.
The big question is if it makes sense taking out of a kernel at all. I still think the answer is no.
Or have you considered replacing
die()andshow_trace()etc. with a singlepanic("the tiny gods say this won't happen")yet? That would be roughly equivalent.
It's not a matter of "won't happen" so much as "not a damn thing we can do when it does". There's very little point in having this sort of code in a mass-market camera, phone, DVR, TV, etc. (of which there are already millions running Linux). These devices have no console and basically zero serviceability beyond firmware upgrades. If taking these vestigial debugging features out means we can cram in more features that consumers can actually see and will pay for, that's precisely what's going to happen.
Signature · 1 line
Mathematics is the supreme nostalgia of our time.
Quoted 2 lines
do when it does". There's very little point in having this sort of code in a mass-market camera, phone, DVR, TV, etc. (of which there are
Do any of them run with a x86 CPU?
-Andi
Quoted 4 lines · Andi Kleen
Quoted 2 lines
do when it does". There's very little point in having this sort of code in a mass-market camera, phone, DVR, TV, etc. (of which there are
Do any of them run with a x86 CPU?
Yes. The last PVR I worked on was just such a device, as was the very first device I put Linux on (1.2 era). There are several families of x86 CPUs targeted at embedded so this shouldn't be a surprise.
Signature · 1 line
Mathematics is the supreme nostalgia of our time.
Quoted 4 lines · Thomas Petazzoni
Enclosed patch allows to configure out the doublefault exception handler. The original patch of Matt Mackall added the option in init/Kconfig, but because this is a x86-specific thing, I thought
arch/x86/Kconfigwould be a better place. Is that correct ?
we already have it for 32-bit - would you mind to do a patch to extend this to 64-bit as well?
Quoted 4 lines
This patch applies on top on the DMI scanning code patch I've sent yesterday, because the DOUBLEFAULT config option is right after the DMI config option. Is that ok, or should I propose a patch on top of a vanilla 2.6.25-rc1 ?
please send patches against x86.git:
http://people.redhat.com/mingo/x86.git/README
Ingo