Skip to contentSkip to conversation

IDE cdrom problem

DISCUSSION Borislav Petkov 3 participants 7 messages Feb 16, 2008 – Feb 17, 2008 1 message not in the archive libata

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw
Quoted 39 lines · Bartlomiej Zolnierkiewicz

[ added Borislav (ide-cd maintainer) to cc: ]

Hi,

Unless there are some very important reasons to keep the discussion private please always cc: linux-ide@ and/or linux-kernel@ ML when reporting problems.

Othewise your mail misses many knowledgeable people and is left on mercy of clueless IDE maintainer... ;-)

---------- Forwarded Message ----------

Subject: IDE cdrom problem
Date: Saturday 16 February 2008
From: WaVeR <[email protected]>
To: [email protected]

Hello Bart,

Sorry to distrub you, but I have a similar problem like this post
http://lkml.org/lkml/2008/2/12/97

I'm not subscribed to linux ML, so I decide to write you directly.

Quoted 1 line

From my dmesg, I get this error:

Feb 16 08:01:58 Jupiter kernel: hdc: cdrom_pc_intr: The drive appears
confused (ireason = 0x01). Trying to recover by ending request.
Feb 16 08:06:16 Jupiter kernel: hdc: cdrom_pc_intr: The drive appears
confused (ireason = 0x01). Trying to recover by ending request.
Feb 16 08:10:45 Jupiter kernel: hdd: cdrom_pc_intr: The drive appears
confused (ireason = 0x01). Trying to recover by ending request.
Feb 16 08:37:41 Jupiter kernel: hdd: cdrom_pc_intr: The drive appears
confused (ireason = 0x01). Trying to recover by ending request.
Feb 16 08:42:10 Jupiter kernel: hdc: cdrom_pc_intr: The drive appears
confused (ireason = 0x01). Trying to recover by ending request.
Feb 16 09:00:07 Jupiter kernel: hdd: cdrom_pc_intr: The drive appears
Quoted 1 line

confused (ireason = 0x01). Trying to recover by ending request.

Yeah, this is kinda funny, i think i've seen that somewhere :) But seriously, can you try 2.6.25-rc2 - this one should be stable enough and it has the ide-cd rewrite in there and it would be interesting to see whether the new interrupt handler shows the same behaviour.

Bart, since this starts to occur often, i'm thinking of adding a debugging macro similar to the ones we rewrote in ide-floppy and ide-tape besides the CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS facility in ide-cd. What are your thoughts on the matter?

Quoted 3,002 lines

As you can see on the atached file. It's a simple IDE dvdrom and a cd burner.

I dont have this problem with the kernel 2.6.21.3

My actual kernel is:
9:28 waver@Jupiter ~% uname -a
Linux Jupiter 2.6.24.2-waver.1 #1 Wed Feb 13 23:53:31 CET 2008 i686 GNU/Linux

Thanks.

Regards,

-------------------------------------------------------

Dumping 121 device(s) from the Global Device List:
-------------------------------------------------
udi = '/org/freedesktop/Hal/devices/computer'
info.addons = {'hald-addon-cpufreq', 'hald-addon-acpi'} (string list)
info.bus = 'unknown' (string)
info.callouts.add = {'hal-storage-cleanup-all-mountpoints'} (string list)
info.interfaces = {'org.freedesktop.Hal.Device.SystemPowerManagement'} (string list)
info.product = 'Computer' (string)
info.subsystem = 'unknown' (string)
info.udi = '/org/freedesktop/Hal/devices/computer' (string)
org.freedesktop.Hal.Device.SystemPowerManagement.method_argnames = {'num_seconds_to_sleep', 'num_seconds_to_sleep', '', '', '', 'enable_power_save'} (string list) org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = {'hal-system-power-suspend', 'hal-system-power-suspend-hybrid', 'hal-system-power-hibernate', 'hal-system-power-shutdown', 'hal-system-power-reboot', 'hal-system-power-set-power-save'} (string list) org.freedesktop.Hal.Device.SystemPowerManagement.method_names = {'Suspend', 'SuspendHybrid', 'Hibernate', 'Shutdown', 'Reboot', 'SetPowerSave'} (string list) org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = {'i', 'i', '', '', '', 'b'} (string list)
power_management.acpi.linux.version = '20070126' (string)
power_management.can_hibernate = false (bool)
power_management.can_suspend = false (bool)
power_management.can_suspend_hybrid = false (bool)
power_management.can_suspend_to_disk = false (bool)
power_management.can_suspend_to_ram = false (bool)
power_management.is_powersave_set = false (bool)
power_management.type = 'acpi' (string)
smbios.bios.release_date = '06/05/2003' (string)
smbios.bios.vendor = 'Award Software, Inc.' (string)
smbios.bios.version = 'ASUS P4B266 ACPI BIOS Revision 1011 Beta 003' (string)
smbios.chassis.manufacturer = 'Chassis Manufacture' (string)
smbios.chassis.type = 'Tower' (string)
smbios.system.manufacturer = 'System Manufacturer' (string)
smbios.system.product = 'System Name' (string)
smbios.system.serial = 'SYS-1234567890' (string)
smbios.system.uuid = 'Not Settable' (string)
smbios.system.version = 'System Version' (string)
system.chassis.manufacturer = 'Chassis Manufacture' (string)
system.chassis.type = 'Tower' (string)
system.firmware.release_date = '06/05/2003' (string)
system.firmware.vendor = 'Award Software, Inc.' (string)
system.firmware.version = 'ASUS P4B266 ACPI BIOS Revision 1011 Beta 003' (string)
system.formfactor = 'desktop' (string)
system.hardware.primary_video.product = 385 (0x181) (int)
system.hardware.primary_video.vendor = 4318 (0x10de) (int)
system.hardware.product = 'System Name' (string)
system.hardware.serial = 'SYS-1234567890' (string)
system.hardware.uuid = 'Not Settable' (string)
system.hardware.vendor = 'System Manufacturer' (string)
system.hardware.version = 'System Version' (string)
system.kernel.machine = 'i686' (string)
system.kernel.name = 'Linux' (string)
system.kernel.version = '2.6.24.2-waver.1' (string)
system.product = 'System Name System Version' (string)
system.vendor = 'System Manufacturer' (string)

udi = '/org/freedesktop/Hal/devices/acpi_CPU'
info.capabilities = {'processor'} (string list) info.category = 'processor' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Intel(R) Pentium(R) 4 CPU 2.00GHz' (string) info.udi = '/org/freedesktop/Hal/devices/acpi_CPU' (string) linux.acpi_path = '/proc/acpi/processor/CPU' (string) linux.acpi_type = 1 (0x1) (int)
linux.hotplug_type = 4 (0x4) (int) processor.can_throttle = false (bool) processor.number = 0 (0x0) (int)

udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'
alsa.device_file = '/dev/snd/timer' (string)
alsa.type = 'timer' (string)
info.capabilities = {'alsa'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'ALSA Timer Device' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_alsa_timer' (string) linux.device_file = '/dev/snd/timer' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/timer' (string)

udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0'
info.capabilities = {'oss'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'OSS Sequencer Device' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0' (string) linux.device_file = '/dev/sequencer2' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/sequencer2' (string) oss.device_file = '/dev/sequencer2' (string)
oss.type = 'sequencer' (string)

udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer'
info.capabilities = {'oss'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'OSS Sequencer Device' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer' (string) linux.device_file = '/dev/sequencer' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/sequencer' (string) oss.device_file = '/dev/sequencer' (string)
oss.type = 'sequencer' (string)

udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer'
alsa.device_file = '/dev/snd/seq' (string)
alsa.type = 'sequencer' (string)
info.capabilities = {'alsa'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'ALSA Sequencer Device' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer' (string) linux.device_file = '/dev/snd/seq' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/seq' (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0'
button.has_state = false (bool)
button.type = 'power' (string)
info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'button'} (string list) info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Power Button (CM)' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0' (string) input.device = '/dev/input/event1' (string)
input.product = 'Power Button (CM)' (string)
linux.device_file = '/dev/input/event1' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/class/input/input1/event1' (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input'
button.has_state = false (bool)
button.type = 'power' (string)
info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'button'} (string list) info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Power Button (FF)' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input' (string) input.device = '/dev/input/event0' (string)
input.product = 'Power Button (FF)' (string)
linux.device_file = '/dev/input/event0' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/class/input/input0/event0' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_1'
info.bus = 'pnp' (string)
info.linux.driver = 'system' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:0e' (string)
pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) pnp.id = 'PNP0c02' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0f13'
info.bus = 'pnp' (string)
info.linux.driver = 'i8042 aux' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'PS/2 Port for PS/2-style Mice' (string) info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0f13' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:0d' (string) pnp.description = 'PS/2 Port for PS/2-style Mice' (string) pnp.id = 'PNP0f13' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0303'
info.bus = 'pnp' (string)
info.linux.driver = 'i8042 kbd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'IBM Enhanced (101/102-key, PS/2 mouse support)' (string) info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0303' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:0c' (string) pnp.description = 'IBM Enhanced (101/102-key, PS/2 mouse support)' (string) pnp.id = 'PNP0303' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_0'
info.bus = 'pnp' (string)
info.linux.driver = 'serial' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '16550A-compatible COM port' (string) info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_0' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:0b' (string) pnp.description = '16550A-compatible COM port' (string) pnp.id = 'PNP0501' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_0_serial_platform_1'
info.capabilities = {'serial'} (string list)
info.category = 'serial' (string)
info.parent = '/org/freedesktop/Hal/devices/pnp_PNP0501_0' (string) info.product = '16550A-compatible COM port' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_0_serial_platform_1' (string) linux.device_file = '/dev/ttyS1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'tty' (string)
linux.sysfs_path = '/sys/class/tty/ttyS1' (string)
serial.device = '/dev/ttyS1' (string)
serial.originating_device = '/org/freedesktop/Hal/devices/pnp_PNP0501_0' (string) serial.physical_device = '/org/freedesktop/Hal/devices/pnp_PNP0501_0' (string) serial.port = 1 (0x1) (int)
serial.type = 'platform' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0501'
info.bus = 'pnp' (string)
info.linux.driver = 'serial' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '16550A-compatible COM port' (string) info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:0a' (string) pnp.description = '16550A-compatible COM port' (string) pnp.id = 'PNP0501' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0'
info.capabilities = {'serial'} (string list)
info.category = 'serial' (string)
info.parent = '/org/freedesktop/Hal/devices/pnp_PNP0501' (string) info.product = '16550A-compatible COM port' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0' (string) linux.device_file = '/dev/ttyS0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'tty' (string)
linux.sysfs_path = '/sys/class/tty/ttyS0' (string)
serial.device = '/dev/ttyS0' (string)
serial.originating_device = '/org/freedesktop/Hal/devices/pnp_PNP0501' (string) serial.physical_device = '/org/freedesktop/Hal/devices/pnp_PNP0501' (string) serial.port = 0 (0x0) (int)
serial.type = 'platform' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0401'
info.bus = 'pnp' (string)
info.linux.driver = 'parport_pc' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'ECP printer port' (string) info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0401' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:09' (string) pnp.description = 'ECP printer port' (string)
pnp.id = 'PNP0401' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0700'
info.bus = 'pnp' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'PC standard floppy disk controller' (string) info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0700' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:08' (string) pnp.description = 'PC standard floppy disk controller' (string) pnp.id = 'PNP0700' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'
info.bus = 'pnp' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Math Coprocessor' (string) info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:07' (string) pnp.description = 'Math Coprocessor' (string)
pnp.id = 'PNP0c04' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0800'
info.bus = 'pnp' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'AT-style speaker sound' (string) info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0800' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:06' (string) pnp.description = 'AT-style speaker sound' (string) pnp.id = 'PNP0800' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'
info.bus = 'pnp' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'AT Real-Time Clock' (string) info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:05' (string) pnp.description = 'AT Real-Time Clock' (string) pnp.id = 'PNP0b00' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'
info.bus = 'pnp' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'AT DMA Controller' (string) info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0200' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:04' (string) pnp.description = 'AT DMA Controller' (string) pnp.id = 'PNP0200' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0'
info.bus = 'pnp' (string)
info.linux.driver = 'system' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:03' (string)
pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) pnp.id = 'PNP0c02' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'
info.bus = 'pnp' (string)
info.linux.driver = 'system' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:02' (string)
pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) pnp.id = 'PNP0c02' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0a03'
info.bus = 'pnp' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'PCI Bus' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0a03' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:01' (string) pnp.description = 'PCI Bus' (string)
pnp.id = 'PNP0a03' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01'
info.bus = 'pnp' (string)
info.linux.driver = 'system' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'System Board' (string) info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:00' (string) pnp.description = 'System Board' (string)
pnp.id = 'PNP0c01' (string)

udi = '/org/freedesktop/Hal/devices/platform_vesafb_0'
info.bus = 'platform' (string)
info.linux.driver = 'vesafb' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (vesafb.0)' (string) info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_vesafb_0' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/vesafb.0' (string) platform.id = 'vesafb.0' (string)

udi = '/org/freedesktop/Hal/devices/platform_serial8250'
info.bus = 'platform' (string)
info.linux.driver = 'serial8250' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (serial8250)' (string) info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_serial8250' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/serial8250' (string) platform.id = 'serial8250' (string)

udi = '/org/freedesktop/Hal/devices/platform_pcspkr'
info.bus = 'platform' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (pcspkr)' (string) info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/pcspkr' (string) platform.id = 'pcspkr' (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042'
info.bus = 'platform' (string)
info.linux.driver = 'i8042' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (i8042)' (string) info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/i8042' (string) platform.id = 'i8042' (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port'
info.bus = 'serio' (string)
info.linux.driver = 'psmouse' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string) info.product = 'i8042 AUX port' (string)
info.subsystem = 'serio' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'serio' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio1' (string) serio.description = 'i8042 AUX port' (string)
serio.id = 'serio1' (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input'
info.capabilities = {'input', 'input.mouse'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string) info.product = 'ImPS/2 Logitech Wheel Mouse' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input' (string) input.device = '/dev/input/event3' (string)
input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string) input.physical_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string) input.product = 'ImPS/2 Logitech Wheel Mouse' (string)
linux.device_file = '/dev/input/event3' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/class/input/input3/event3' (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'
info.bus = 'serio' (string)
info.linux.driver = 'atkbd' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string) info.product = 'i8042 KBD port' (string)
info.subsystem = 'serio' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'serio' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio0' (string) serio.description = 'i8042 KBD port' (string)
serio.id = 'serio0' (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input'
info.addons.singleton = {'hald-addon-input'} (string list)
info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys', 'button'} (string list) info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string) info.product = 'AT Translated Set 2 keyboard' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input' (string) input.device = '/dev/input/event2' (string)
input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string) input.physical_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string) input.product = 'AT Translated Set 2 keyboard' (string)
input.xkb.layout = 'us' (string)
input.xkb.model = 'evdev' (string)
input.xkb.rules = 'base' (string)
input.xkb.variant = '' (string)
linux.device_file = '/dev/input/event2' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/class/input/input2/event2' (string)

udi = '/org/freedesktop/Hal/devices/platform_floppy_0'
info.bus = 'platform' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Platform Device (floppy.0)' (string) info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_floppy_0' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/floppy.0' (string) platform.id = 'floppy.0' (string)

udi = '/org/freedesktop/Hal/devices/platform_floppy_0_storage'
block.device = '/dev/fd0' (string) block.is_volume = false (bool)

  block.major = 2  (0x2)  (int)
  block.minor = 0  (0x0)  (int)

block.storage_device = '/org/freedesktop/Hal/devices/platform_floppy_0_storage' (string)
info.capabilities = {'storage', 'block'} (string list)
info.category = 'storage' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
info.parent = '/org/freedesktop/Hal/devices/platform_floppy_0' (string)
info.product = 'PC Floppy Drive' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_floppy_0_storage' (string)
info.vendor = '' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/fd0' (string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
storage.automount_enabled_hint = true (bool)
storage.bus = 'platform' (string)
storage.drive_type = 'floppy' (string)
storage.hotpluggable = false (bool)
storage.media_check_enabled = false (bool)
storage.model = '' (string)
storage.no_partitions_hint = true (bool)
storage.originating_device = '/org/freedesktop/Hal/devices/platform_floppy_0' (string)
storage.physical_device = '/org/freedesktop/Hal/devices/platform_floppy_0' (string)
storage.removable = true (bool)
storage.removable.media_available = false (bool)
storage.requires_eject = false (bool)
storage.size = 0 (0x0) (uint64)
storage.vendor = 'PC Floppy Drive' (string)
volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'utf8', 'shortname=', 'codepage=', 'iocharset=', 'umask=', 'uid='} (string list)

udi = '/org/freedesktop/Hal/devices/pci_8086_2444'
info.bus = 'pci' (string)
info.linux.driver = 'uhci_hcd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801BA/BAM USB Controller #1' (string) info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2444' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.4' (string) pci.device_class = 12 (0xc) (int)

  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 3  (0x3)  (int)

pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.4' (string) pci.product = '82801BA/BAM USB Controller #1' (string) pci.product_id = 9284 (0x2444) (int) pci.subsys_product_id = 32808 (0x8028) (int) pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string) pci.subsys_vendor_id = 4163 (0x1043) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1f_4'
info.bus = 'usb_device' (string)
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2444' (string) info.product = 'UHCI Host Controller' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1f_4' (string) info.vendor = 'Linux 2.6.24.2-waver.1 uhci_hcd' (string) linux.device_file = '/dev/bus/usb/006/001' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.4/usb6' (string) usb_device.bus_number = 6 (0x6) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.4/usb6' (string) usb_device.max_power = 0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 2 (0x2) (int)
usb_device.product = 'UHCI Host Controller' (string) usb_device.product_id = 0 (0x0) (int)
usb_device.serial = '0000:00:1f.4' (string)
usb_device.speed = 12.0 (12) (double)
usb_device.speed_bcd = 4608 (0x1200) (int)
usb_device.vendor = 'Linux 2.6.24.2-waver.1 uhci_hcd' (string) usb_device.vendor_id = 0 (0x0) (int)
usb_device.version = 1.1 (1.1) (double)
usb_device.version_bcd = 272 (0x110) (int)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1f_4_usbraw'
info.capabilities = {'usbraw'} (string list)
info.category = 'usbraw' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1f_4' (string) info.product = 'USB Raw Device Access' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1f_4_usbraw' (string) linux.device_file = '/dev/bus/usb/006/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb_device' (string)
linux.sysfs_path = '/sys/class/usb_device/usbdev6.1' (string) usbraw.device = '/dev/bus/usb/006/001' (string)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1f_4_if0'
info.bus = 'usb' (string)
info.linux.driver = 'hub' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1f_4' (string) info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1f_4_if0' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.4/usb6/6-0:1.0' (string) usb.bus_number = 6 (0x6) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206) (int)

  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)

usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.4/usb6/6-0:1.0' (string) usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 2 (0x2) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 0 (0x0) (int)
usb.serial = '0000:00:1f.4' (string)
usb.speed = 12.0 (12) (double)
usb.speed_bcd = 4608 (0x1200) (int)
usb.vendor = 'Linux 2.6.24.2-waver.1 uhci_hcd' (string)
usb.vendor_id = 0 (0x0) (int)
usb.version = 1.1 (1.1) (double)
usb.version_bcd = 272 (0x110) (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_2443'
info.bus = 'pci' (string)
info.linux.driver = 'i801_smbus' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801BA/BAM SMBus Controller' (string) info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2443' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.3' (string) pci.device_class = 12 (0xc) (int)

  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 5  (0x5)  (int)

pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.3' (string) pci.product = '82801BA/BAM SMBus Controller' (string) pci.product_id = 9283 (0x2443) (int) pci.subsys_product_id = 32808 (0x8028) (int) pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string) pci.subsys_vendor_id = 4163 (0x1043) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_2442'
info.bus = 'pci' (string)
info.linux.driver = 'uhci_hcd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801BA/BAM USB Controller #1' (string) info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2442' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2' (string) pci.device_class = 12 (0xc) (int)

  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 3  (0x3)  (int)

pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2' (string) pci.product = '82801BA/BAM USB Controller #1' (string) pci.product_id = 9282 (0x2442) (int) pci.subsys_product_id = 32808 (0x8028) (int) pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string) pci.subsys_vendor_id = 4163 (0x1043) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1f_2'
info.bus = 'usb_device' (string)
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2442' (string) info.product = 'UHCI Host Controller' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1f_2' (string) info.vendor = 'Linux 2.6.24.2-waver.1 uhci_hcd' (string) linux.device_file = '/dev/bus/usb/005/001' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/usb5' (string) usb_device.bus_number = 5 (0x5) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = true (bool) usb_device.linux.device_number = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/usb5' (string) usb_device.max_power = 0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 2 (0x2) (int)
usb_device.product = 'UHCI Host Controller' (string) usb_device.product_id = 0 (0x0) (int)
usb_device.serial = '0000:00:1f.2' (string)
usb_device.speed = 12.0 (12) (double)
usb_device.speed_bcd = 4608 (0x1200) (int)
usb_device.vendor = 'Linux 2.6.24.2-waver.1 uhci_hcd' (string) usb_device.vendor_id = 0 (0x0) (int)
usb_device.version = 1.1 (1.1) (double)
usb_device.version_bcd = 272 (0x110) (int)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1f_2_usbraw'
info.capabilities = {'usbraw'} (string list)
info.category = 'usbraw' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1f_2' (string) info.product = 'USB Raw Device Access' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1f_2_usbraw' (string) linux.device_file = '/dev/bus/usb/005/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb_device' (string)
linux.sysfs_path = '/sys/class/usb_device/usbdev5.1' (string) usbraw.device = '/dev/bus/usb/005/001' (string)

udi = '/org/freedesktop/Hal/devices/usb_device_3f0_904_CN1BK1P0FFSX'
info.bus = 'usb_device' (string)
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1f_2' (string) info.product = 'DeskJet 845c' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_3f0_904_CN1BK1P0FFSX' (string) info.vendor = 'Hewlett-Packard' (string)
linux.device_file = '/dev/bus/usb/005/002' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/usb5/5-2' (string) usb_device.bus_number = 5 (0x5) (int)
usb_device.can_wake_up = false (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 0 (0x0) (int)
usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 256 (0x100) (int) usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 2 (0x2) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/usb5/5-2' (string) usb_device.max_power = 2 (0x2) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 0 (0x0) (int)
usb_device.product = 'DeskJet 845c' (string)
usb_device.product_id = 2308 (0x904) (int)
usb_device.serial = 'CN1BK1P0FFSX' (string)
usb_device.speed = 12.0 (12) (double)
usb_device.speed_bcd = 4608 (0x1200) (int)
usb_device.vendor = 'Hewlett-Packard' (string)
usb_device.vendor_id = 1008 (0x3f0) (int)
usb_device.version = 1.1 (1.1) (double)
usb_device.version_bcd = 272 (0x110) (int)

udi = '/org/freedesktop/Hal/devices/usb_device_3f0_904_CN1BK1P0FFSX_usbraw'
info.capabilities = {'usbraw'} (string list)
info.category = 'usbraw' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_3f0_904_CN1BK1P0FFSX' (string) info.product = 'USB Raw Device Access' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_3f0_904_CN1BK1P0FFSX_usbraw' (string) linux.device_file = '/dev/bus/usb/005/002' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb_device' (string)
linux.sysfs_path = '/sys/class/usb_device/usbdev5.2' (string) usbraw.device = '/dev/bus/usb/005/002' (string)

udi = '/org/freedesktop/Hal/devices/usb_device_3f0_904_CN1BK1P0FFSX_if0'
info.bus = 'usb' (string)
info.linux.driver = 'usblp' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_3f0_904_CN1BK1P0FFSX' (string) info.product = 'USB Printer Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_3f0_904_CN1BK1P0FFSX_if0' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/usb5/5-2/5-2:1.0' (string) usb.bus_number = 5 (0x5) (int)
usb.can_wake_up = false (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 0 (0x0) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 256 (0x100) (int)

  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 7  (0x7)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 2  (0x2)  (int)
  usb.interface.subclass = 1  (0x1)  (int)
  usb.is_self_powered = true  (bool)

usb.linux.device_number = 2 (0x2) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/usb5/5-2/5-2:1.0' (string) usb.max_power = 2 (0x2) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB Printer Interface' (string)
usb.product_id = 2308 (0x904) (int)
usb.serial = 'CN1BK1P0FFSX' (string)
usb.speed = 12.0 (12) (double)
usb.speed_bcd = 4608 (0x1200) (int)
usb.vendor = 'Hewlett-Packard' (string)
usb.vendor_id = 1008 (0x3f0) (int)
usb.version = 1.1 (1.1) (double)
usb.version_bcd = 272 (0x110) (int)

udi = '/org/freedesktop/Hal/devices/usb_device_3f0_904_CN1BK1P0FFSX_if0_printer_CN1BK1P0FFSX'
info.capabilities = {'printer'} (string list)
info.category = 'printer' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_3f0_904_CN1BK1P0FFSX_if0' (string) info.product = 'DESKJET 845C' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_3f0_904_CN1BK1P0FFSX_if0_printer_CN1BK1P0FFSX' (string) info.vendor = 'HEWLETT-PACKARD' (string)
linux.device_file = '/dev/usb/lp0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/class/usb/lp0' (string)
printer.commandset = {'MLC', 'PCL', 'PML'} (string list)
printer.description = 'Hewlett-Packard DeskJet 845C' (string)
printer.device = '/dev/usb/lp0' (string)
printer.originating_device = '/org/freedesktop/Hal/devices/usb_device_3f0_904_CN1BK1P0FFSX_if0' (string) printer.physical_device = '/org/freedesktop/Hal/devices/usb_device_3f0_904_CN1BK1P0FFSX_if0' (string) printer.product = 'DESKJET 845C' (string)
printer.serial = 'CN1BK1P0FFSX' (string)
printer.vendor = 'HEWLETT-PACKARD' (string)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1f_2_if0'
info.bus = 'usb' (string)
info.linux.driver = 'hub' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1f_2' (string) info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1f_2_if0' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/usb5/5-0:1.0' (string) usb.bus_number = 5 (0x5) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206) (int)

  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)

usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/usb5/5-0:1.0' (string) usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 2 (0x2) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 0 (0x0) (int)
usb.serial = '0000:00:1f.2' (string)
usb.speed = 12.0 (12) (double)
usb.speed_bcd = 4608 (0x1200) (int)
usb.vendor = 'Linux 2.6.24.2-waver.1 uhci_hcd' (string)
usb.vendor_id = 0 (0x0) (int)
usb.version = 1.1 (1.1) (double)
usb.version_bcd = 272 (0x110) (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_244b'
info.bus = 'pci' (string)
info.linux.driver = 'PIIX_IDE' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801BA IDE U100 Controller' (string) info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_244b' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1' (string) pci.device_class = 1 (0x1) (int)
pci.device_protocol = 128 (0x80) (int) pci.device_subclass = 1 (0x1) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1' (string) pci.product = '82801BA IDE U100 Controller' (string) pci.product_id = 9291 (0x244b) (int) pci.subsys_product_id = 32808 (0x8028) (int) pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string) pci.subsys_vendor_id = 4163 (0x1043) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_244b_ide_1_1'
ide.channel = 1 (0x1) (int)
ide.host = 1 (0x1) (int)
info.bus = 'ide' (string)
info.linux.driver = 'ide-cdrom' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_244b' (string) info.product = 'IDE device (slave)' (string)
info.subsystem = 'ide' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_244b_ide_1_1' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'ide' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/ide1/1.1' (string)

udi = '/org/freedesktop/Hal/devices/storage_model_LITE_ON_LTR_48125S'
block.device = '/dev/hdd' (string)
block.is_volume = false (bool)

  block.major = 22  (0x16)  (int)
  block.minor = 64  (0x40)  (int)

block.storage_device = '/org/freedesktop/Hal/devices/storage_model_LITE_ON_LTR_48125S' (string) info.addons = {'hald-addon-storage'} (string list)
info.capabilities = {'storage', 'block', 'storage.cdrom'} (string list)
info.category = 'storage' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage'} (string list) info.parent = '/org/freedesktop/Hal/devices/pci_8086_244b_ide_1_1' (string)
info.product = 'LITE-ON LTR-48125S' (string)
info.udi = '/org/freedesktop/Hal/devices/storage_model_LITE_ON_LTR_48125S' (string) linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/hdd' (string)
org.freedesktop.Hal.Device.Storage.method_argnames = {'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Storage.method_execpaths = {'hal-storage-eject', 'hal-storage-closetray'} (string list) org.freedesktop.Hal.Device.Storage.method_names = {'Eject', 'CloseTray'} (string list) org.freedesktop.Hal.Device.Storage.method_signatures = {'as', 'as'} (string list) storage.automount_enabled_hint = true (bool)
storage.bus = 'ide' (string)
storage.cdrom.bd = false (bool)
storage.cdrom.bdr = false (bool)
storage.cdrom.bdre = false (bool)
storage.cdrom.cdr = true (bool)
storage.cdrom.cdrw = true (bool)
storage.cdrom.dvd = false (bool)
storage.cdrom.dvdplusr = false (bool)
storage.cdrom.dvdplusrdl = false (bool)
storage.cdrom.dvdplusrw = false (bool)
storage.cdrom.dvdplusrwdl = false (bool)
storage.cdrom.dvdr = false (bool)
storage.cdrom.dvdram = false (bool)
storage.cdrom.dvdrw = false (bool)
storage.cdrom.hddvd = false (bool)
storage.cdrom.hddvdr = false (bool)
storage.cdrom.hddvdrw = false (bool)
storage.cdrom.mo = false (bool)
storage.cdrom.mrw = true (bool)
storage.cdrom.mrw_w = true (bool)
storage.cdrom.read_speed = 8448 (0x2100) (int)
storage.cdrom.support_media_changed = true (bool)
storage.cdrom.support_multisession = true (bool)
storage.cdrom.write_speed = 8448 (0x2100) (int)
storage.cdrom.write_speeds = {'8448', '7040', '5632', '4224', '2816', '2112', '1760', '1408', '704', '352'} (string list) storage.drive_type = 'cdrom' (string)
storage.firmware_version = '1S07' (string)
storage.hotpluggable = false (bool)
storage.media_check_enabled = true (bool)
storage.model = 'LITE-ON LTR-48125S' (string)
storage.no_partitions_hint = true (bool)
storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string) storage.physical_device = '/org/freedesktop/Hal/devices/computer' (string)
storage.removable = true (bool)
storage.removable.media_available = false (bool)
storage.removable.support_async_notification = false (bool)
storage.requires_eject = true (bool)
storage.size = 0 (0x0) (uint64)
storage.vendor = '' (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_244b_ide_1_0'
ide.channel = 0 (0x0) (int)
ide.host = 1 (0x1) (int)
info.bus = 'ide' (string)
info.linux.driver = 'ide-cdrom' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_244b' (string) info.product = 'IDE device (master)' (string)
info.subsystem = 'ide' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_244b_ide_1_0' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'ide' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/ide1/1.0' (string)

udi = '/org/freedesktop/Hal/devices/storage_model_HL_DT_STDVD_ROM_GDR8161B'
block.device = '/dev/hdc' (string)
block.is_volume = false (bool)
block.major = 22 (0x16) (int)
block.minor = 0 (0x0) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_model_HL_DT_STDVD_ROM_GDR8161B' (string) info.addons = {'hald-addon-storage'} (string list)
info.capabilities = {'storage', 'block', 'storage.cdrom'} (string list)
info.category = 'storage' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage'} (string list) info.parent = '/org/freedesktop/Hal/devices/pci_8086_244b_ide_1_0' (string)
info.product = 'HL-DT-STDVD-ROM GDR8161B' (string)
info.udi = '/org/freedesktop/Hal/devices/storage_model_HL_DT_STDVD_ROM_GDR8161B' (string) linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/hdc' (string) org.freedesktop.Hal.Device.Storage.method_argnames = {'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Storage.method_execpaths = {'hal-storage-eject', 'hal-storage-closetray'} (string list) org.freedesktop.Hal.Device.Storage.method_names = {'Eject', 'CloseTray'} (string list) org.freedesktop.Hal.Device.Storage.method_signatures = {'as', 'as'} (string list) storage.automount_enabled_hint = true (bool)
storage.bus = 'ide' (string)
storage.cdrom.bd = false (bool)
storage.cdrom.bdr = false (bool)
storage.cdrom.bdre = false (bool)
storage.cdrom.cdr = false (bool)
storage.cdrom.cdrw = false (bool)
storage.cdrom.dvd = true (bool)
storage.cdrom.dvdplusr = false (bool)
storage.cdrom.dvdplusrdl = false (bool)
storage.cdrom.dvdplusrw = false (bool)
storage.cdrom.dvdplusrwdl = false (bool)
storage.cdrom.dvdr = false (bool)
storage.cdrom.dvdram = false (bool)
storage.cdrom.dvdrw = false (bool)
storage.cdrom.hddvd = false (bool)
storage.cdrom.hddvdr = false (bool)
storage.cdrom.hddvdrw = false (bool)
storage.cdrom.mo = false (bool)
storage.cdrom.mrw = true (bool)
storage.cdrom.mrw_w = true (bool)
storage.cdrom.read_speed = 8467 (0x2113) (int)
storage.cdrom.support_media_changed = true (bool)
storage.cdrom.support_multisession = true (bool)
storage.cdrom.write_speed = 0 (0x0) (int)
storage.cdrom.write_speeds = {} (string list)
storage.drive_type = 'cdrom' (string)
storage.firmware_version = '0100' (string)
storage.hotpluggable = false (bool)
storage.media_check_enabled = true (bool)
storage.model = 'HL-DT-STDVD-ROM GDR8161B' (string)
storage.no_partitions_hint = true (bool)
storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string) storage.partitioning_scheme = '' (string)
storage.physical_device = '/org/freedesktop/Hal/devices/computer' (string)
storage.removable = true (bool)
storage.removable.media_available = true (bool)
storage.removable.media_size = 716974080 (0x2abc2800) (uint64) storage.removable.support_async_notification = false (bool)
storage.requires_eject = true (bool)
storage.size = 0 (0x0) (uint64)
storage.vendor = '' (string)

udi = '/org/freedesktop/Hal/devices/volume_part_1_size_716974080'
block.device = '/dev/hdc' (string)
block.is_volume = true (bool)
block.major = 22 (0x16) (int)
block.minor = 0 (0x0) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_model_HL_DT_STDVD_ROM_GDR8161B' (string) info.capabilities = {'volume.disc', 'volume', 'block'} (string list)
info.category = 'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume', 'org.freedesktop.Hal.Device.Volume'} (string list) info.parent = '/org/freedesktop/Hal/devices/storage_model_HL_DT_STDVD_ROM_GDR8161B' (string) info.udi = '/org/freedesktop/Hal/devices/volume_part_1_size_716974080' (string) linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/hdc/fakevolume' (string) org.freedesktop.Hal.Device.Volume.method_argnames = {'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-eject', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Eject', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'as', 'as'} (string list) storage.model = '' (string)
volume.block_size = 2048 (0x800) (int)
volume.disc.capacity = 716974080 (0x2abc2800) (uint64)
volume.disc.has_audio = true (bool)
volume.disc.has_data = false (bool)
volume.disc.is_appendable = false (bool)
volume.disc.is_blank = false (bool)
volume.disc.is_rewritable = false (bool)
volume.disc.type = 'cd_rom' (string)
volume.fstype = '' (string)
volume.fsusage = '' (string)
volume.fsversion = '' (string)
volume.is_disc = true (bool)
volume.is_mounted = false (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = false (bool)
volume.label = '' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount_point = '' (string)
volume.num_blocks = 1400340 (0x155e14) (int)
volume.size = 716974080 (0x2abc2800) (uint64)
volume.uuid = '' (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_244b_ide_0_1'
ide.channel = 1 (0x1) (int)
ide.host = 0 (0x0) (int)
info.bus = 'ide' (string)
info.linux.driver = 'ide-disk' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_244b' (string) info.product = 'IDE device (slave)' (string)
info.subsystem = 'ide' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_244b_ide_0_1' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'ide' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/ide0/0.1' (string)

udi = '/org/freedesktop/Hal/devices/storage_serial_VNR33EC3G5HU6K'
block.device = '/dev/hdb' (string)
block.is_volume = false (bool)
block.major = 3 (0x3) (int)
block.minor = 64 (0x40) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_VNR33EC3G5HU6K' (string) info.capabilities = {'storage', 'block'} (string list)
info.category = 'storage' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_244b_ide_0_1' (string) info.product = 'HDS722512VLAT80' (string)
info.udi = '/org/freedesktop/Hal/devices/storage_serial_VNR33EC3G5HU6K' (string) linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/hdb' (string)
storage.automount_enabled_hint = true (bool)
storage.bus = 'ide' (string)
storage.drive_type = 'disk' (string)
storage.firmware_version = 'V33OA60A' (string)
storage.hotpluggable = false (bool)
storage.media_check_enabled = false (bool)
storage.model = 'HDS722512VLAT80' (string)
storage.no_partitions_hint = false (bool)
storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string) storage.partitioning_scheme = 'mbr' (string)
storage.physical_device = '/org/freedesktop/Hal/devices/computer' (string) storage.removable = false (bool)
storage.removable.media_available = true (bool)
storage.removable.media_size = 123522416640 (0x1cc2828000) (uint64) storage.requires_eject = false (bool)
storage.serial = 'VNR33EC3G5HU6K' (string)
storage.size = 123522416640 (0x1cc2828000) (uint64)
storage.vendor = '' (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_d8cba6fc_2072_489c_8b7d_364f7358e22a'
block.device = '/dev/hdb9' (string)
block.is_volume = true (bool)
block.major = 3 (0x3) (int)
block.minor = 73 (0x49) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_VNR33EC3G5HU6K' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_VNR33EC3G5HU6K' (string)
info.product = 'FTP' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_d8cba6fc_2072_489c_8b7d_364f7358e22a' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/hdb/hdb9' (string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
storage.model = '' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'ext3' (string)
volume.fsusage = 'filesystem' (string)
volume.fsversion = '1.0' (string)
volume.ignore = false (bool)
volume.is_disc = false (bool)
volume.is_mounted = true (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = 'FTP' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list) volume.mount_point = '/mnt/scratch1' (string)
volume.num_blocks = 62749827 (0x3bd7c83) (int)
volume.partition.media_size = 123522416640 (0x1cc2828000) (uint64)
volume.partition.number = 9 (0x9) (int)
volume.partition.start = 91391118336 (0x154755cc00) (uint64)
volume.size = 32127911424 (0x77af90600) (uint64)
volume.unmount.valid_options = {'lazy'} (string list)
volume.uuid = 'd8cba6fc-2072-489c-8b7d-364f7358e22a' (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_bb4ca8ac_a0c2_4812_8895_d3de91c17a0d'
block.device = '/dev/hdb8' (string)
block.is_volume = true (bool)
block.major = 3 (0x3) (int)
block.minor = 72 (0x48) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_VNR33EC3G5HU6K' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_VNR33EC3G5HU6K' (string)
info.product = 'Lea' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_bb4ca8ac_a0c2_4812_8895_d3de91c17a0d' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/hdb/hdb8' (string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
storage.model = '' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'ext3' (string)
volume.fsusage = 'filesystem' (string)
volume.fsversion = '1.0' (string)
volume.ignore = false (bool)
volume.is_disc = false (bool)
volume.is_mounted = true (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = 'Lea' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list) volume.mount_point = '/mnt/lea' (string)
volume.num_blocks = 24868557 (0x17b76cd) (int)
volume.partition.media_size = 123522416640 (0x1cc2828000) (uint64)
volume.partition.number = 8 (0x8) (int)
volume.partition.start = 78658384896 (0x125067b400) (uint64)
volume.size = 12732701184 (0x2f6ed9a00) (uint64)
volume.unmount.valid_options = {'lazy'} (string list)
volume.uuid = 'bb4ca8ac-a0c2-4812-8895-d3de91c17a0d' (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_f6969f8b_848d_4fe5_a46a_ddf9068e6b14'
block.device = '/dev/hdb7' (string)
block.is_volume = true (bool)
block.major = 3 (0x3) (int)
block.minor = 71 (0x47) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_VNR33EC3G5HU6K' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_VNR33EC3G5HU6K' (string)
info.product = 'WaVeR' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_f6969f8b_848d_4fe5_a46a_ddf9068e6b14' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/hdb/hdb7' (string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
storage.model = '' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'ext3' (string)
volume.fsusage = 'filesystem' (string)
volume.fsversion = '1.0' (string)
volume.ignore = false (bool)
volume.is_disc = false (bool)
volume.is_mounted = true (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = 'WaVeR' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list) volume.mount_point = '/mnt/waver' (string)
volume.num_blocks = 30732282 (0x1d4effa) (int)
volume.partition.media_size = 123522416640 (0x1cc2828000) (uint64)
volume.partition.number = 7 (0x7) (int)
volume.partition.start = 62923424256 (0xea6874200) (uint64)
volume.size = 15734928384 (0x3a9dff400) (uint64)
volume.unmount.valid_options = {'lazy'} (string list)
volume.uuid = 'f6969f8b-848d-4fe5-a46a-ddf9068e6b14' (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_a4e35aa2_9384_4699_9dc9_65733b998240'
block.device = '/dev/hdb6' (string)
block.is_volume = true (bool)
block.major = 3 (0x3) (int)
block.minor = 70 (0x46) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_VNR33EC3G5HU6K' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_VNR33EC3G5HU6K' (string)
info.product = 'Music' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_a4e35aa2_9384_4699_9dc9_65733b998240' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/hdb/hdb6' (string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
storage.model = '' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'ext3' (string)
volume.fsusage = 'filesystem' (string)
volume.fsversion = '1.0' (string)
volume.ignore = false (bool)
volume.is_disc = false (bool)
volume.is_mounted = true (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = 'Music' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list) volume.mount_point = '/mnt/scratch' (string)
volume.num_blocks = 61448562 (0x3a9a172) (int)
volume.partition.media_size = 123522416640 (0x1cc2828000) (uint64)
volume.partition.number = 6 (0x6) (int)
volume.partition.start = 31461728256 (0x75343e000) (uint64)
volume.size = 31461663744 (0x75342e400) (uint64)
volume.unmount.valid_options = {'lazy'} (string list)
volume.uuid = 'a4e35aa2-9384-4699-9dc9-65733b998240' (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_81c889f8_6fe1_40a1_969a_b2a1e8f158b1'
block.device = '/dev/hdb5' (string)
block.is_volume = true (bool)
block.major = 3 (0x3) (int)
block.minor = 69 (0x45) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_VNR33EC3G5HU6K' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_VNR33EC3G5HU6K' (string)
info.product = 'Backup' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_81c889f8_6fe1_40a1_969a_b2a1e8f158b1' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/hdb/hdb5' (string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
storage.model = '' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'ext3' (string)
volume.fsusage = 'filesystem' (string)
volume.fsversion = '1.0' (string)
volume.ignore = false (bool)
volume.is_disc = false (bool)
volume.is_mounted = true (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = 'Backup' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list) volume.mount_point = '/mnt/backup' (string)
volume.num_blocks = 61448499 (0x3a9a133) (int)
volume.partition.flags = {} (string list)
volume.partition.label = '' (string)
volume.partition.media_size = 123522416640 (0x1cc2828000) (uint64)
volume.partition.number = 5 (0x5) (int)
volume.partition.scheme = 'embr' (string)
volume.partition.start = 64512 (0xfc00) (uint64)
volume.partition.type = '0x83' (string)
volume.partition.uuid = '' (string)
volume.size = 31461631488 (0x753426600) (uint64)
volume.unmount.valid_options = {'lazy'} (string list)
volume.uuid = '81c889f8-6fe1-40a1-969a-b2a1e8f158b1' (string)

udi = '/org/freedesktop/Hal/devices/volume_part1_size_1024'
block.device = '/dev/hdb1' (string)
block.is_volume = true (bool)
block.major = 3 (0x3) (int)
block.minor = 65 (0x41) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_VNR33EC3G5HU6K' (string) info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_VNR33EC3G5HU6K' (string) info.product = 'Volume' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_part1_size_1024' (string) linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/hdb/hdb1' (string)
storage.model = '' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = '' (string)
volume.fsusage = 'partitiontable' (string)
volume.fsversion = '' (string)
volume.is_disc = false (bool)
volume.is_mounted = false (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = '' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount_point = '' (string)
volume.num_blocks = 2 (0x2) (int)
volume.partition.flags = {} (string list)
volume.partition.label = '' (string)
volume.partition.media_size = 123522416640 (0x1cc2828000) (uint64) volume.partition.number = 1 (0x1) (int)
volume.partition.scheme = 'mbr' (string)
volume.partition.start = 32256 (0x7e00) (uint64)
volume.partition.type = '0x05' (string)
volume.partition.uuid = '' (string)
volume.size = 1024 (0x400) (uint64)
volume.uuid = '' (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_244b_ide_0_0'
ide.channel = 0 (0x0) (int)
ide.host = 0 (0x0) (int)
info.bus = 'ide' (string)
info.linux.driver = 'ide-disk' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_244b' (string) info.product = 'IDE device (master)' (string)
info.subsystem = 'ide' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_244b_ide_0_0' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'ide' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/ide0/0.0' (string)

udi = '/org/freedesktop/Hal/devices/storage_serial_VN343EC4G26U2K'
block.device = '/dev/hda' (string)
block.is_volume = false (bool)

  block.major = 3  (0x3)  (int)
  block.minor = 0  (0x0)  (int)

block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_VN343EC4G26U2K' (string) info.capabilities = {'storage', 'block'} (string list)
info.category = 'storage' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_244b_ide_0_0' (string) info.product = 'HDS722512VLAT80' (string)
info.udi = '/org/freedesktop/Hal/devices/storage_serial_VN343EC4G26U2K' (string) linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/hda' (string)
storage.automount_enabled_hint = true (bool)
storage.bus = 'ide' (string)
storage.drive_type = 'disk' (string)
storage.firmware_version = 'V33OA60A' (string)
storage.hotpluggable = false (bool)
storage.media_check_enabled = false (bool)
storage.model = 'HDS722512VLAT80' (string)
storage.no_partitions_hint = false (bool)
storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string) storage.partitioning_scheme = 'mbr' (string)
storage.physical_device = '/org/freedesktop/Hal/devices/computer' (string) storage.removable = false (bool)
storage.removable.media_available = true (bool)
storage.removable.media_size = 123522416640 (0x1cc2828000) (uint64) storage.requires_eject = false (bool)
storage.serial = 'VN343EC4G26U2K' (string)
storage.size = 123522416640 (0x1cc2828000) (uint64)
storage.vendor = '' (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_96f42662_aae4_48ae_8811_f87435d7451a'
block.device = '/dev/hda8' (string)

  block.is_volume = true  (bool)
  block.major = 3  (0x3)  (int)
  block.minor = 8  (0x8)  (int)

block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_VN343EC4G26U2K' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_VN343EC4G26U2K' (string)
info.product = 'Volume (ext3)' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_96f42662_aae4_48ae_8811_f87435d7451a' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/hda/hda8' (string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
storage.model = '' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'ext3' (string)
volume.fsusage = 'filesystem' (string)
volume.fsversion = '1.0' (string)
volume.ignore = false (bool)
volume.is_disc = false (bool)
volume.is_mounted = true (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = '' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list) volume.mount_point = '/mnt/pegasus' (string)
volume.num_blocks = 127588167 (0x79ad747) (int)
volume.partition.media_size = 123522416640 (0x1cc2828000) (uint64)
volume.partition.number = 8 (0x8) (int)
volume.partition.start = 58193888256 (0xd8ca04400) (uint64)
volume.size = 65325141504 (0xf35ae8e00) (uint64)
volume.unmount.valid_options = {'lazy'} (string list)
volume.uuid = '96f42662-aae4-48ae-8811-f87435d7451a' (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_7f74a13f_cdd3_43e4_b828_b75b5e0e9395'
block.device = '/dev/hda7' (string)

  block.is_volume = true  (bool)
  block.major = 3  (0x3)  (int)
  block.minor = 7  (0x7)  (int)

block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_VN343EC4G26U2K' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_VN343EC4G26U2K' (string)
info.product = 'TMP' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_7f74a13f_cdd3_43e4_b828_b75b5e0e9395' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/hda/hda7' (string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
storage.model = '' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'ext3' (string)
volume.fsusage = 'filesystem' (string)
volume.fsversion = '1.0' (string)
volume.ignore = false (bool)
volume.is_disc = false (bool)
volume.is_mounted = true (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = 'TMP' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list) volume.mount_point = '/tmp' (string)
volume.num_blocks = 5960052 (0x5af174) (int)
volume.partition.media_size = 123522416640 (0x1cc2828000) (uint64)
volume.partition.number = 7 (0x7) (int)
volume.partition.start = 55142309376 (0xcd6bcde00) (uint64)
volume.size = 3051546624 (0xb5e2e800) (uint64)
volume.unmount.valid_options = {'lazy'} (string list)
volume.uuid = '7f74a13f-cdd3-43e4-b828-b75b5e0e9395' (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_a7d6c0a8_bfab_45d1_93ca_3d9f53af4c30'
block.device = '/dev/hda6' (string)

  block.is_volume = true  (bool)
  block.major = 3  (0x3)  (int)
  block.minor = 6  (0x6)  (int)

block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_VN343EC4G26U2K' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_VN343EC4G26U2K' (string)
info.product = 'VAR' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_a7d6c0a8_bfab_45d1_93ca_3d9f53af4c30' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/hda/hda6' (string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
storage.model = '' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'ext3' (string)
volume.fsusage = 'filesystem' (string)
volume.fsversion = '1.0' (string)
volume.ignore = false (bool)
volume.is_disc = false (bool)
volume.is_mounted = true (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = 'VAR' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list) volume.mount_point = '/var' (string)
volume.num_blocks = 7903917 (0x789aad) (int)
volume.partition.media_size = 123522416640 (0x1cc2828000) (uint64)
volume.partition.number = 6 (0x6) (int)
volume.partition.start = 51095471616 (0xbe5870600) (uint64)
volume.size = 4046805504 (0xf1355a00) (uint64)
volume.unmount.valid_options = {'lazy'} (string list)
volume.uuid = 'a7d6c0a8-bfab-45d1-93ca-3d9f53af4c30' (string)

udi = '/org/freedesktop/Hal/devices/volume_part5_size_2048062464'
block.device = '/dev/hda5' (string)

  block.is_volume = true  (bool)
  block.major = 3  (0x3)  (int)
  block.minor = 5  (0x5)  (int)

block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_VN343EC4G26U2K' (string) info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_VN343EC4G26U2K' (string) info.product = 'Volume (swap)' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_part5_size_2048062464' (string) linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/hda/hda5' (string)
storage.model = '' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'swap' (string)
volume.fsusage = 'other' (string)
volume.fsversion = '2' (string)
volume.is_disc = false (bool)
volume.is_mounted = false (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = '' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount_point = '' (string)
volume.num_blocks = 4000122 (0x3d097a) (int)
volume.partition.media_size = 123522416640 (0x1cc2828000) (uint64) volume.partition.number = 5 (0x5) (int)
volume.partition.start = 49047376896 (0xb6b739400) (uint64)
volume.size = 2048062464 (0x7a12f400) (uint64)
volume.uuid = '' (string)

udi = '/org/freedesktop/Hal/devices/volume_part4_size_1024'
block.device = '/dev/hda4' (string)

  block.is_volume = true  (bool)
  block.major = 3  (0x3)  (int)
  block.minor = 4  (0x4)  (int)

block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_VN343EC4G26U2K' (string) info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_VN343EC4G26U2K' (string) info.product = 'Volume' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_part4_size_1024' (string) linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/hda/hda4' (string)
storage.model = '' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = '' (string)
volume.fsusage = '' (string)
volume.fsversion = '' (string)
volume.is_disc = false (bool)
volume.is_mounted = false (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = '' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount_point = '' (string)
volume.num_blocks = 2 (0x2) (int)
volume.partition.media_size = 123522416640 (0x1cc2828000) (uint64) volume.partition.number = 4 (0x4) (int)
volume.partition.start = 49047344640 (0xb6b731600) (uint64)
volume.size = 1024 (0x400) (uint64)
volume.uuid = '' (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_0c0e7b06_a8a7_4391_a2c7_d3e0f15194d3'
block.device = '/dev/hda3' (string)

  block.is_volume = true  (bool)
  block.major = 3  (0x3)  (int)
  block.minor = 3  (0x3)  (int)

block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_VN343EC4G26U2K' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_VN343EC4G26U2K' (string)
info.product = 'HOME' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_0c0e7b06_a8a7_4391_a2c7_d3e0f15194d3' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/hda/hda3' (string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
storage.model = '' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'ext3' (string)
volume.fsusage = 'filesystem' (string)
volume.fsversion = '1.0' (string)
volume.ignore = false (bool)
volume.is_disc = false (bool)
volume.is_mounted = true (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = 'HOME' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list) volume.mount_point = '/home' (string)
volume.num_blocks = 58589055 (0x37dff7f) (int)
volume.partition.flags = {} (string list)
volume.partition.label = '' (string)
volume.partition.media_size = 123522416640 (0x1cc2828000) (uint64)
volume.partition.number = 3 (0x3) (int)
volume.partition.scheme = 'mbr' (string)
volume.partition.start = 19049748480 (0x46f741800) (uint64)
volume.partition.type = '0x83' (string)
volume.partition.uuid = '' (string)
volume.size = 29997596160 (0x6fbfefe00) (uint64)
volume.unmount.valid_options = {'lazy'} (string list)
volume.uuid = '0c0e7b06-a8a7-4391-a2c7-d3e0f15194d3' (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_06bbd646_3133_4659_9091_79343e2a1f25'
block.device = '/dev/hda2' (string)

  block.is_volume = true  (bool)
  block.major = 3  (0x3)  (int)
  block.minor = 2  (0x2)  (int)

block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_VN343EC4G26U2K' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_VN343EC4G26U2K' (string)
info.product = 'USR' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_06bbd646_3133_4659_9091_79343e2a1f25' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/hda/hda2' (string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
storage.model = '' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'ext3' (string)
volume.fsusage = 'filesystem' (string)
volume.fsversion = '1.0' (string)
volume.ignore = false (bool)
volume.is_disc = false (bool)
volume.is_mounted = true (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = 'USR' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list) volume.mount_point = '/usr' (string)
volume.num_blocks = 33206355 (0x1fab053) (int)
volume.partition.flags = {} (string list)
volume.partition.label = '' (string)
volume.partition.media_size = 123522416640 (0x1cc2828000) (uint64)
volume.partition.number = 2 (0x2) (int)
volume.partition.scheme = 'mbr' (string)
volume.partition.start = 2048094720 (0x7a137200) (uint64)
volume.partition.type = '0x83' (string)
volume.partition.uuid = '' (string)
volume.size = 17001653760 (0x3f560a600) (uint64)
volume.unmount.valid_options = {'lazy'} (string list)
volume.uuid = '06bbd646-3133-4659-9091-79343e2a1f25' (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_f6ecb3ed_6556_446e_bb4b_c76969a1507f'
block.device = '/dev/hda1' (string)

  block.is_volume = true  (bool)
  block.major = 3  (0x3)  (int)
  block.minor = 1  (0x1)  (int)

block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_VN343EC4G26U2K' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_VN343EC4G26U2K' (string)
info.product = 'Volume (ext3)' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_f6ecb3ed_6556_446e_bb4b_c76969a1507f' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/hda/hda1' (string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
storage.model = '' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'ext3' (string)
volume.fsusage = 'filesystem' (string)
volume.fsversion = '1.0' (string)
volume.ignore = false (bool)
volume.is_disc = false (bool)
volume.is_mounted = true (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = '' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list) volume.mount_point = '/' (string)
volume.num_blocks = 4000122 (0x3d097a) (int)
volume.partition.flags = {'boot'} (string list)
volume.partition.label = '' (string)
volume.partition.media_size = 123522416640 (0x1cc2828000) (uint64)
volume.partition.number = 1 (0x1) (int)
volume.partition.scheme = 'mbr' (string)
volume.partition.start = 32256 (0x7e00) (uint64)
volume.partition.type = '0x83' (string)
volume.partition.uuid = '' (string)
volume.size = 2048062464 (0x7a12f400) (uint64)
volume.unmount.valid_options = {'lazy'} (string list)
volume.uuid = 'f6ecb3ed-6556-446e-bb4b-c76969a1507f' (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_2440'
info.bus = 'pci' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801BA ISA Bridge (LPC)' (string) info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2440' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0' (string) pci.device_class = 6 (0x6) (int)

  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 1  (0x1)  (int)

pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0' (string) pci.product = '82801BA ISA Bridge (LPC)' (string) pci.product_id = 9280 (0x2440) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_244e'
info.bus = 'pci' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82801 PCI Bridge' (string) info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_244e' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0' (string) pci.device_class = 6 (0x6) (int)

  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 4  (0x4)  (int)

pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0' (string) pci.product = '82801 PCI Bridge' (string)
pci.product_id = 9294 (0x244e) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)

udi = '/org/freedesktop/Hal/devices/pci_105a_4d69'
info.bus = 'pci' (string)
info.linux.driver = 'Promise_IDE' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_244e' (string) info.product = '20269' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_105a_4d69' (string) info.vendor = 'Promise Technology, Inc.' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0e.0' (string) pci.device_class = 1 (0x1) (int)

  pci.device_protocol = 133  (0x85)  (int)
  pci.device_subclass = 128  (0x80)  (int)

pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0e.0' (string) pci.product = '20269' (string)
pci.product_id = 19817 (0x4d69) (int)
pci.subsys_product = 'Ultra133TX2' (string)
pci.subsys_product_id = 19816 (0x4d68) (int)
pci.subsys_vendor = 'Promise Technology, Inc.' (string) pci.subsys_vendor_id = 4186 (0x105a) (int)
pci.vendor = 'Promise Technology, Inc.' (string)
pci.vendor_id = 4186 (0x105a) (int)

udi = '/org/freedesktop/Hal/devices/pci_105a_4d69_ide_2_1'
ide.channel = 1 (0x1) (int)
ide.host = 2 (0x2) (int)
info.bus = 'ide' (string)
info.linux.driver = 'ide-disk' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_105a_4d69' (string) info.product = 'IDE device (slave)' (string)
info.subsystem = 'ide' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_105a_4d69_ide_2_1' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'ide' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0e.0/ide2/2.1' (string)

udi = '/org/freedesktop/Hal/devices/storage_serial_S08BJ1CL606177'
block.device = '/dev/hdf' (string)
block.is_volume = false (bool)

  block.major = 33  (0x21)  (int)
  block.minor = 64  (0x40)  (int)

block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_S08BJ1CL606177' (string) info.capabilities = {'storage', 'block'} (string list)
info.category = 'storage' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_105a_4d69_ide_2_1' (string) info.product = 'SAMSUNG SP2514N' (string)
info.udi = '/org/freedesktop/Hal/devices/storage_serial_S08BJ1CL606177' (string) linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/hdf' (string)
storage.automount_enabled_hint = true (bool)
storage.bus = 'ide' (string)
storage.drive_type = 'disk' (string)
storage.firmware_version = 'VF100-41' (string)
storage.hotpluggable = false (bool)
storage.media_check_enabled = false (bool)
storage.model = 'SAMSUNG SP2514N' (string)
storage.no_partitions_hint = false (bool)
storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string) storage.partitioning_scheme = 'mbr' (string)
storage.physical_device = '/org/freedesktop/Hal/devices/computer' (string) storage.removable = false (bool)
storage.removable.media_available = true (bool)
storage.removable.media_size = 250059350016 (0x3a38b2e000) (uint64) storage.requires_eject = false (bool)
storage.serial = 'S08BJ1CL606177' (string)
storage.size = 250059350016 (0x3a38b2e000) (uint64)
storage.vendor = '' (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_a5b077e6_2fd8_4501_8891_e8bc7dd436f0'
block.device = '/dev/hdf6' (string)
block.is_volume = true (bool)

  block.major = 33  (0x21)  (int)
  block.minor = 70  (0x46)  (int)

block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_S08BJ1CL606177' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_S08BJ1CL606177' (string)
info.product = 'Volume (ext3)' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_a5b077e6_2fd8_4501_8891_e8bc7dd436f0' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/hdf/hdf6' (string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
storage.model = '' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'ext3' (string)
volume.fsusage = 'filesystem' (string)
volume.fsversion = '1.0' (string)
volume.ignore = false (bool)
volume.is_disc = false (bool)
volume.is_mounted = true (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = '' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list) volume.mount_point = '/mnt/ftp' (string)
volume.num_blocks = 244187937 (0xe8e0321) (int)
volume.partition.media_size = 250059350016 (0x3a38b2e000) (uint64)
volume.partition.number = 6 (0x6) (int)
volume.partition.start = 125032513536 (0x1d1c84c000) (uint64)
volume.size = 125024223744 (0x1d1c064200) (uint64)
volume.unmount.valid_options = {'lazy'} (string list)
volume.uuid = 'a5b077e6-2fd8-4501-8891-e8bc7dd436f0' (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_d5bff4d9_8016_4517_bd33_2c60c5e31e1f'
block.device = '/dev/hdf5' (string)
block.is_volume = true (bool)

  block.major = 33  (0x21)  (int)
  block.minor = 69  (0x45)  (int)

block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_S08BJ1CL606177' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_S08BJ1CL606177' (string)
info.product = 'Volume (ext3)' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_d5bff4d9_8016_4517_bd33_2c60c5e31e1f' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/hdf/hdf5' (string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
storage.model = '' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'ext3' (string)
volume.fsusage = 'filesystem' (string)
volume.fsversion = '1.0' (string)
volume.ignore = false (bool)
volume.is_disc = false (bool)
volume.is_mounted = true (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = '' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list) volume.mount_point = '/mnt/music' (string)
volume.num_blocks = 244203939 (0xe8e41a3) (int)
volume.partition.flags = {} (string list)
volume.partition.label = '' (string)
volume.partition.media_size = 250059350016 (0x3a38b2e000) (uint64)
volume.partition.number = 5 (0x5) (int)
volume.partition.scheme = 'embr' (string)
volume.partition.start = 64512 (0xfc00) (uint64)
volume.partition.type = '0x83' (string)
volume.partition.uuid = '' (string)
volume.size = 125032416768 (0x1d1c834600) (uint64)
volume.unmount.valid_options = {'lazy'} (string list)
volume.uuid = 'd5bff4d9-8016-4517-bd33-2c60c5e31e1f' (string)

udi = '/org/freedesktop/Hal/devices/volume_part1_size_1024_1'
block.device = '/dev/hdf1' (string) block.is_volume = true (bool)

  block.major = 33  (0x21)  (int)
  block.minor = 65  (0x41)  (int)

block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_S08BJ1CL606177' (string) info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_S08BJ1CL606177' (string) info.product = 'Volume' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_part1_size_1024_1' (string) linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/hdf/hdf1' (string)
storage.model = '' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = '' (string)
volume.fsusage = 'partitiontable' (string)
volume.fsversion = '' (string)
volume.is_disc = false (bool)
volume.is_mounted = false (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = '' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount_point = '' (string)
volume.num_blocks = 2 (0x2) (int)
volume.partition.flags = {} (string list)
volume.partition.label = '' (string)
volume.partition.media_size = 250059350016 (0x3a38b2e000) (uint64) volume.partition.number = 1 (0x1) (int)
volume.partition.scheme = 'mbr' (string)
volume.partition.start = 32256 (0x7e00) (uint64)
volume.partition.type = '0x05' (string)
volume.partition.uuid = '' (string)
volume.size = 1024 (0x400) (uint64)
volume.uuid = '' (string)

udi = '/org/freedesktop/Hal/devices/pci_105a_4d69_ide_2_0'
ide.channel = 0 (0x0) (int)
ide.host = 2 (0x2) (int)
info.bus = 'ide' (string)
info.linux.driver = 'ide-disk' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_105a_4d69' (string) info.product = 'IDE device (master)' (string)
info.subsystem = 'ide' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_105a_4d69_ide_2_0' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'ide' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0e.0/ide2/2.0' (string)

udi = '/org/freedesktop/Hal/devices/storage_serial_T4HRDFYC'
block.device = '/dev/hde' (string)
block.is_volume = false (bool)
block.major = 33 (0x21) (int)
block.minor = 0 (0x0) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_T4HRDFYC' (string) info.capabilities = {'storage', 'block'} (string list)
info.category = 'storage' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_105a_4d69_ide_2_0' (string) info.product = 'Maxtor 5T040H4' (string)
info.udi = '/org/freedesktop/Hal/devices/storage_serial_T4HRDFYC' (string) linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/hde' (string) storage.automount_enabled_hint = true (bool)
storage.bus = 'ide' (string)
storage.drive_type = 'disk' (string)
storage.firmware_version = 'TAH71DP0' (string)
storage.hotpluggable = false (bool)
storage.media_check_enabled = false (bool)
storage.model = 'Maxtor 5T040H4' (string)
storage.no_partitions_hint = false (bool)
storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string) storage.partitioning_scheme = 'mbr' (string)
storage.physical_device = '/org/freedesktop/Hal/devices/computer' (string) storage.removable = false (bool)
storage.removable.media_available = true (bool) storage.removable.media_size = 40982151168 (0x98aba0000) (uint64) storage.requires_eject = false (bool)
storage.serial = 'T4HRDFYC' (string)
storage.size = 40982151168 (0x98aba0000) (uint64)
storage.vendor = '' (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_342b5c16_d163_42a7_8703_c38f3159da10'
block.device = '/dev/hde5' (string)
block.is_volume = true (bool)
block.major = 33 (0x21) (int)
block.minor = 5 (0x5) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_T4HRDFYC' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_T4HRDFYC' (string)
info.product = 'Volume (ext3)' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_342b5c16_d163_42a7_8703_c38f3159da10' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/hde/hde5' (string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list) org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list) org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list) org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
storage.model = '' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'ext3' (string)
volume.fsusage = 'filesystem' (string)
volume.fsversion = '1.0' (string)
volume.ignore = false (bool)
volume.is_disc = false (bool)
volume.is_mounted = true (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = '' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list) volume.mount_point = '/mnt/data' (string)
volume.num_blocks = 80035704 (0x4c53f78) (int)
volume.partition.flags = {} (string list)
volume.partition.label = '' (string)
volume.partition.media_size = 40982151168 (0x98aba0000) (uint64)
volume.partition.number = 5 (0x5) (int)
volume.partition.scheme = 'embr' (string)
volume.partition.start = 64512 (0xfc00) (uint64)
volume.partition.type = '0x83' (string)
volume.partition.uuid = '' (string)
volume.size = 40978280448 (0x98a7ef000) (uint64)
volume.unmount.valid_options = {'lazy'} (string list)
volume.uuid = '342b5c16-d163-42a7-8703-c38f3159da10' (string)

udi = '/org/freedesktop/Hal/devices/volume_part1_size_1024_0'
block.device = '/dev/hde1' (string)
block.is_volume = true (bool)
block.major = 33 (0x21) (int)
block.minor = 1 (0x1) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_T4HRDFYC' (string) info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_T4HRDFYC' (string) info.product = 'Volume' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_part1_size_1024_0' (string) linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/hde/hde1' (string)
storage.model = '' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = '' (string)
volume.fsusage = 'partitiontable' (string)
volume.fsversion = '' (string)
volume.is_disc = false (bool)
volume.is_mounted = false (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = '' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount_point = '' (string)
volume.num_blocks = 2 (0x2) (int)
volume.partition.flags = {} (string list)
volume.partition.label = '' (string)
volume.partition.media_size = 40982151168 (0x98aba0000) (uint64) volume.partition.number = 1 (0x1) (int)
volume.partition.scheme = 'mbr' (string)
volume.partition.start = 32256 (0x7e00) (uint64)
volume.partition.type = '0x05' (string)
volume.partition.uuid = '' (string)
volume.size = 1024 (0x400) (uint64)
volume.uuid = '' (string)

udi = '/org/freedesktop/Hal/devices/pci_1106_3106'
info.bus = 'pci' (string)
info.linux.driver = 'via-rhine' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_244e' (string) info.product = 'VT6105 [Rhine-III]' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1106_3106' (string) info.vendor = 'VIA Technologies, Inc.' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0d.0' (string) pci.device_class = 2 (0x2) (int)

  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)

pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0d.0' (string) pci.product = 'VT6105 [Rhine-III]' (string)
pci.product_id = 12550 (0x3106) (int)
pci.subsys_product = 'DFE-530TX rev C' (string)
pci.subsys_product_id = 5123 (0x1403) (int)
pci.subsys_vendor = 'D-Link System Inc' (string)
pci.subsys_vendor_id = 4486 (0x1186) (int)
pci.vendor = 'VIA Technologies, Inc.' (string)
pci.vendor_id = 4358 (0x1106) (int)

udi = '/org/freedesktop/Hal/devices/net_00_11_95_81_e7_8b'
info.capabilities = {'net', 'net.80203'} (string list) info.category = 'net.80203' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1106_3106' (string) info.product = 'Networking Interface' (string)
info.udi = '/org/freedesktop/Hal/devices/net_00_11_95_81_e7_8b' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'net' (string)
linux.sysfs_path = '/sys/class/net/eth0' (string) net.80203.mac_address = 75522762635 (0x119581e78b) (uint64) net.address = '00:11:95:81:e7:8b' (string)
net.arp_proto_hw_id = 1 (0x1) (int)
net.interface = 'eth0' (string)
net.linux.ifindex = 2 (0x2) (int)
net.originating_device = '/org/freedesktop/Hal/devices/pci_1106_3106' (string) net.physical_device = '/org/freedesktop/Hal/devices/pci_1106_3106' (string)

udi = '/org/freedesktop/Hal/devices/pci_10b9_5239'
info.bus = 'pci' (string)
info.linux.driver = 'ehci_hcd' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_244e' (string) info.product = 'USB 2.0 Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5239' (string) info.vendor = 'ALi Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0c.3' (string) pci.device_class = 12 (0xc) (int)
pci.device_protocol = 32 (0x20) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0c.3' (string) pci.product = 'USB 2.0 Controller' (string)
pci.product_id = 21049 (0x5239) (int)
pci.subsys_product_id = 21106 (0x5272) (int)
pci.subsys_vendor = 'ALi Corporation' (string)
pci.subsys_vendor_id = 4281 (0x10b9) (int)
pci.vendor = 'ALi Corporation' (string)
pci.vendor_id = 4281 (0x10b9) (int)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_0c_3'
info.bus = 'usb_device' (string)
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_10b9_5239' (string) info.product = 'EHCI Host Controller' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_0c_3' (string) info.vendor = 'Linux 2.6.24.2-waver.1 ehci_hcd' (string)
linux.device_file = '/dev/bus/usb/004/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0c.3/usb4' (string) usb_device.bus_number = 4 (0x4) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 1 (0x1) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0c.3/usb4' (string) usb_device.max_power = 0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 6 (0x6) (int)
usb_device.product = 'EHCI Host Controller' (string)
usb_device.product_id = 0 (0x0) (int)
usb_device.serial = '0000:02:0c.3' (string)
usb_device.speed = 480.0 (480) (double)
usb_device.speed_bcd = 294912 (0x48000) (int)
usb_device.vendor = 'Linux 2.6.24.2-waver.1 ehci_hcd' (string) usb_device.vendor_id = 0 (0x0) (int)
usb_device.version = 2.0 (2) (double)
usb_device.version_bcd = 512 (0x200) (int)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_0c_3_usbraw'
info.capabilities = {'usbraw'} (string list)
info.category = 'usbraw' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_0c_3' (string) info.product = 'USB Raw Device Access' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_0c_3_usbraw' (string) linux.device_file = '/dev/bus/usb/004/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb_device' (string)
linux.sysfs_path = '/sys/class/usb_device/usbdev4.1' (string) usbraw.device = '/dev/bus/usb/004/001' (string)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_0c_3_if0'
info.bus = 'usb' (string)
info.linux.driver = 'hub' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_0c_3' (string) info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_0c_3_if0' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0c.3/usb4/4-0:1.0' (string) usb.bus_number = 4 (0x4) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 1 (0x1) (int)
usb.device_revision_bcd = 518 (0x206) (int)

  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)

usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0c.3/usb4/4-0:1.0' (string) usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 6 (0x6) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 0 (0x0) (int)
usb.serial = '0000:02:0c.3' (string)
usb.speed = 480.0 (480) (double)
usb.speed_bcd = 294912 (0x48000) (int)
usb.vendor = 'Linux 2.6.24.2-waver.1 ehci_hcd' (string)
usb.vendor_id = 0 (0x0) (int)
usb.version = 2.0 (2) (double)
usb.version_bcd = 512 (0x200) (int)

udi = '/org/freedesktop/Hal/devices/pci_10b9_5237_1'
info.bus = 'pci' (string)
info.linux.driver = 'ohci_hcd' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_244e' (string) info.product = 'USB 1.1 Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5237_1' (string) info.vendor = 'ALi Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0c.2' (string) pci.device_class = 12 (0xc) (int)
pci.device_protocol = 16 (0x10) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0c.2' (string) pci.product = 'USB 1.1 Controller' (string)
pci.product_id = 21047 (0x5237) (int)
pci.subsys_product = 'ASRock 939Dual-SATA2 Motherboard' (string) pci.subsys_product_id = 21047 (0x5237) (int)
pci.subsys_vendor = 'ALi Corporation' (string)
pci.subsys_vendor_id = 4281 (0x10b9) (int)
pci.vendor = 'ALi Corporation' (string)
pci.vendor_id = 4281 (0x10b9) (int)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_0c_2'
info.bus = 'usb_device' (string)
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_10b9_5237_1' (string) info.product = 'OHCI Host Controller' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_0c_2' (string) info.vendor = 'Linux 2.6.24.2-waver.1 ohci_hcd' (string)
linux.device_file = '/dev/bus/usb/003/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0c.2/usb3' (string) usb_device.bus_number = 3 (0x3) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0c.2/usb3' (string) usb_device.max_power = 0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 2 (0x2) (int)
usb_device.product = 'OHCI Host Controller' (string)
usb_device.product_id = 0 (0x0) (int)
usb_device.serial = '0000:02:0c.2' (string)
usb_device.speed = 12.0 (12) (double)
usb_device.speed_bcd = 4608 (0x1200) (int)
usb_device.vendor = 'Linux 2.6.24.2-waver.1 ohci_hcd' (string) usb_device.vendor_id = 0 (0x0) (int)
usb_device.version = 1.1 (1.1) (double)
usb_device.version_bcd = 272 (0x110) (int)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_0c_2_usbraw'
info.capabilities = {'usbraw'} (string list)
info.category = 'usbraw' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_0c_2' (string) info.product = 'USB Raw Device Access' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_0c_2_usbraw' (string) linux.device_file = '/dev/bus/usb/003/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb_device' (string)
linux.sysfs_path = '/sys/class/usb_device/usbdev3.1' (string) usbraw.device = '/dev/bus/usb/003/001' (string)

udi = '/org/freedesktop/Hal/devices/usb_device_4a9_220d_noserial'
info.bus = 'usb_device' (string)
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_0c_2' (string) info.product = 'CanoScan N670U/N676U/LiDE 20' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_4a9_220d_noserial' (string) info.vendor = 'Canon, Inc.' (string)
linux.device_file = '/dev/bus/usb/003/002' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0c.2/usb3/3-1' (string) usb_device.bus_number = 3 (0x3) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 255 (0xff) (int)
usb_device.device_protocol = 255 (0xff) (int)
usb_device.device_revision_bcd = 256 (0x100) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = false (bool)
usb_device.linux.device_number = 2 (0x2) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0c.2/usb3/3-1' (string) usb_device.max_power = 500 (0x1f4) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 0 (0x0) (int)
usb_device.product = 'CanoScan N670U/N676U/LiDE 20' (string)
usb_device.product_id = 8717 (0x220d) (int)
usb_device.speed = 12.0 (12) (double)
usb_device.speed_bcd = 4608 (0x1200) (int)
usb_device.vendor = 'Canon, Inc.' (string)
usb_device.vendor_id = 1193 (0x4a9) (int)
usb_device.version = 1.1 (1.1) (double)
usb_device.version_bcd = 272 (0x110) (int)

udi = '/org/freedesktop/Hal/devices/usb_device_4a9_220d_noserial_usbraw'
info.capabilities = {'usbraw'} (string list)
info.category = 'usbraw' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_4a9_220d_noserial' (string) info.product = 'USB Raw Device Access' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_4a9_220d_noserial_usbraw' (string) linux.device_file = '/dev/bus/usb/003/002' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb_device' (string)
linux.sysfs_path = '/sys/class/usb_device/usbdev3.2' (string) usbraw.device = '/dev/bus/usb/003/002' (string)

udi = '/org/freedesktop/Hal/devices/usb_device_4a9_220d_noserial_if0'
info.bus = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_4a9_220d_noserial' (string) info.product = 'USB Vendor Specific Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_4a9_220d_noserial_if0' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0c.2/usb3/3-1/3-1:1.0' (string) usb.bus_number = 3 (0x3) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 255 (0xff) (int)
usb.device_protocol = 255 (0xff) (int)
usb.device_revision_bcd = 256 (0x100) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 255 (0xff) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 255 (0xff) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = false (bool)
usb.linux.device_number = 2 (0x2) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0c.2/usb3/3-1/3-1:1.0' (string) usb.max_power = 500 (0x1f4) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB Vendor Specific Interface' (string)
usb.product_id = 8717 (0x220d) (int)
usb.speed = 12.0 (12) (double)
usb.speed_bcd = 4608 (0x1200) (int)
usb.vendor = 'Canon, Inc.' (string)
usb.vendor_id = 1193 (0x4a9) (int)
usb.version = 1.1 (1.1) (double)
usb.version_bcd = 272 (0x110) (int)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_0c_2_if0'
info.bus = 'usb' (string)
info.linux.driver = 'hub' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_0c_2' (string) info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_0c_2_if0' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0c.2/usb3/3-0:1.0' (string) usb.bus_number = 3 (0x3) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206) (int)

  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)

usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0c.2/usb3/3-0:1.0' (string) usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 2 (0x2) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 0 (0x0) (int)
usb.serial = '0000:02:0c.2' (string)
usb.speed = 12.0 (12) (double)
usb.speed_bcd = 4608 (0x1200) (int)
usb.vendor = 'Linux 2.6.24.2-waver.1 ohci_hcd' (string)
usb.vendor_id = 0 (0x0) (int)
usb.version = 1.1 (1.1) (double)
usb.version_bcd = 272 (0x110) (int)

udi = '/org/freedesktop/Hal/devices/pci_10b9_5237_0'
info.bus = 'pci' (string)
info.linux.driver = 'ohci_hcd' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_244e' (string) info.product = 'USB 1.1 Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5237_0' (string) info.vendor = 'ALi Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0c.1' (string) pci.device_class = 12 (0xc) (int)
pci.device_protocol = 16 (0x10) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0c.1' (string) pci.product = 'USB 1.1 Controller' (string)
pci.product_id = 21047 (0x5237) (int)
pci.subsys_product = 'ASRock 939Dual-SATA2 Motherboard' (string) pci.subsys_product_id = 21047 (0x5237) (int)
pci.subsys_vendor = 'ALi Corporation' (string)
pci.subsys_vendor_id = 4281 (0x10b9) (int)
pci.vendor = 'ALi Corporation' (string)
pci.vendor_id = 4281 (0x10b9) (int)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_0c_1'
info.bus = 'usb_device' (string)
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_10b9_5237_0' (string) info.product = 'OHCI Host Controller' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_0c_1' (string) info.vendor = 'Linux 2.6.24.2-waver.1 ohci_hcd' (string)
linux.device_file = '/dev/bus/usb/002/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0c.1/usb2' (string) usb_device.bus_number = 2 (0x2) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0c.1/usb2' (string) usb_device.max_power = 0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 2 (0x2) (int)
usb_device.product = 'OHCI Host Controller' (string)
usb_device.product_id = 0 (0x0) (int)
usb_device.serial = '0000:02:0c.1' (string)
usb_device.speed = 12.0 (12) (double)
usb_device.speed_bcd = 4608 (0x1200) (int)
usb_device.vendor = 'Linux 2.6.24.2-waver.1 ohci_hcd' (string) usb_device.vendor_id = 0 (0x0) (int)
usb_device.version = 1.1 (1.1) (double)
usb_device.version_bcd = 272 (0x110) (int)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_0c_1_usbraw'
info.capabilities = {'usbraw'} (string list)
info.category = 'usbraw' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_0c_1' (string) info.product = 'USB Raw Device Access' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_0c_1_usbraw' (string) linux.device_file = '/dev/bus/usb/002/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb_device' (string)
linux.sysfs_path = '/sys/class/usb_device/usbdev2.1' (string) usbraw.device = '/dev/bus/usb/002/001' (string)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_0c_1_if0'
info.bus = 'usb' (string)
info.linux.driver = 'hub' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_0c_1' (string) info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_0c_1_if0' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0c.1/usb2/2-0:1.0' (string) usb.bus_number = 2 (0x2) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206) (int)

  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)

usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0c.1/usb2/2-0:1.0' (string) usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 2 (0x2) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 0 (0x0) (int)
usb.serial = '0000:02:0c.1' (string)
usb.speed = 12.0 (12) (double)
usb.speed_bcd = 4608 (0x1200) (int)
usb.vendor = 'Linux 2.6.24.2-waver.1 ohci_hcd' (string)
usb.vendor_id = 0 (0x0) (int)
usb.version = 1.1 (1.1) (double)
usb.version_bcd = 272 (0x110) (int)

udi = '/org/freedesktop/Hal/devices/pci_10b9_5237'
info.bus = 'pci' (string)
info.linux.driver = 'ohci_hcd' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_244e' (string) info.product = 'USB 1.1 Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5237' (string) info.vendor = 'ALi Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0c.0' (string) pci.device_class = 12 (0xc) (int)
pci.device_protocol = 16 (0x10) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0c.0' (string) pci.product = 'USB 1.1 Controller' (string)
pci.product_id = 21047 (0x5237) (int)
pci.subsys_product = 'ASRock 939Dual-SATA2 Motherboard' (string) pci.subsys_product_id = 21047 (0x5237) (int)
pci.subsys_vendor = 'ALi Corporation' (string)
pci.subsys_vendor_id = 4281 (0x10b9) (int)
pci.vendor = 'ALi Corporation' (string)
pci.vendor_id = 4281 (0x10b9) (int)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_0c_0'
info.bus = 'usb_device' (string)
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_10b9_5237' (string) info.product = 'OHCI Host Controller' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_0c_0' (string) info.vendor = 'Linux 2.6.24.2-waver.1 ohci_hcd' (string)
linux.device_file = '/dev/bus/usb/001/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0c.0/usb1' (string) usb_device.bus_number = 1 (0x1) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0c.0/usb1' (string) usb_device.max_power = 0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 2 (0x2) (int)
usb_device.product = 'OHCI Host Controller' (string)
usb_device.product_id = 0 (0x0) (int)
usb_device.serial = '0000:02:0c.0' (string)
usb_device.speed = 12.0 (12) (double)
usb_device.speed_bcd = 4608 (0x1200) (int)
usb_device.vendor = 'Linux 2.6.24.2-waver.1 ohci_hcd' (string) usb_device.vendor_id = 0 (0x0) (int)
usb_device.version = 1.1 (1.1) (double)
usb_device.version_bcd = 272 (0x110) (int)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_0c_0_usbraw'
info.capabilities = {'usbraw'} (string list)
info.category = 'usbraw' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_0c_0' (string) info.product = 'USB Raw Device Access' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_0c_0_usbraw' (string) linux.device_file = '/dev/bus/usb/001/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb_device' (string)
linux.sysfs_path = '/sys/class/usb_device/usbdev1.1' (string) usbraw.device = '/dev/bus/usb/001/001' (string)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_0c_0_if0'
info.bus = 'usb' (string)
info.linux.driver = 'hub' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_0c_0' (string) info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_0c_0_if0' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0c.0/usb1/1-0:1.0' (string) usb.bus_number = 1 (0x1) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206) (int)

  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)

usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0c.0/usb1/1-0:1.0' (string) usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 2 (0x2) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 0 (0x0) (int)
usb.serial = '0000:02:0c.0' (string)
usb.speed = 12.0 (12) (double)
usb.speed_bcd = 4608 (0x1200) (int)
usb.vendor = 'Linux 2.6.24.2-waver.1 ohci_hcd' (string)
usb.vendor_id = 0 (0x0) (int)
usb.version = 1.1 (1.1) (double)
usb.version_bcd = 272 (0x110) (int)

udi = '/org/freedesktop/Hal/devices/pci_10ec_8139'
info.bus = 'pci' (string)
info.linux.driver = '8139too' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_244e' (string) info.product = 'RTL-8139/8139C/8139C+' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10ec_8139' (string) info.vendor = 'Realtek Semiconductor Co., Ltd.' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0b.0' (string) pci.device_class = 2 (0x2) (int)

  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)

pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0b.0' (string) pci.product = 'RTL-8139/8139C/8139C+' (string)
pci.product_id = 33081 (0x8139) (int)
pci.subsys_product = 'RT8139' (string)
pci.subsys_product_id = 33081 (0x8139) (int)
pci.subsys_vendor = 'Realtek Semiconductor Co., Ltd.' (string) pci.subsys_vendor_id = 4332 (0x10ec) (int)
pci.vendor = 'Realtek Semiconductor Co., Ltd.' (string)
pci.vendor_id = 4332 (0x10ec) (int)

udi = '/org/freedesktop/Hal/devices/net_00_40_f4_55_91_dc'
info.capabilities = {'net', 'net.80203'} (string list) info.category = 'net.80203' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_10ec_8139' (string) info.product = 'Networking Interface' (string)
info.udi = '/org/freedesktop/Hal/devices/net_00_40_f4_55_91_dc' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'net' (string)
linux.sysfs_path = '/sys/class/net/eth1' (string) net.80203.mac_address = 278977155548 (0x40f45591dc) (uint64) net.address = '00:40:f4:55:91:dc' (string)
net.arp_proto_hw_id = 1 (0x1) (int)
net.interface = 'eth1' (string)
net.linux.ifindex = 3 (0x3) (int)
net.originating_device = '/org/freedesktop/Hal/devices/pci_10ec_8139' (string) net.physical_device = '/org/freedesktop/Hal/devices/pci_10ec_8139' (string)

udi = '/org/freedesktop/Hal/devices/pci_1274_5880'
info.bus = 'pci' (string)
info.linux.driver = 'ENS1371' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_244e' (string) info.product = '5880 AudioPCI' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1274_5880' (string) info.vendor = 'Ensoniq' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0a.0' (string) pci.device_class = 4 (0x4) (int)

  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 1  (0x1)  (int)

pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:0a.0' (string) pci.product = '5880 AudioPCI' (string)
pci.product_id = 22656 (0x5880) (int)
pci.subsys_product = 'Sound Blaster 16PCI 4.1ch' (string) pci.subsys_product_id = 32769 (0x8001) (int)
pci.subsys_vendor = 'Ensoniq' (string)
pci.subsys_vendor_id = 4724 (0x1274) (int)
pci.vendor = 'Ensoniq' (string)
pci.vendor_id = 4724 (0x1274) (int)

udi = '/org/freedesktop/Hal/devices/pci_1274_5880_alsa_playback_1'
alsa.card = 0 (0x0) (int)
alsa.card_id = 'Ensoniq AudioPCI ENS1371' (string)
alsa.device = 1 (0x1) (int)
alsa.device_file = '/dev/snd/pcmC0D1p' (string)
alsa.device_id = 'ES1371 DAC1' (string)
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1274_5880' (string) alsa.pcm_class = 'generic' (string)
alsa.physical_device = '/org/freedesktop/Hal/devices/pci_1274_5880' (string) alsa.type = 'playback' (string)
info.capabilities = {'alsa'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1274_5880' (string) info.product = 'ES1371 DAC1 ALSA Playback Device' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1274_5880_alsa_playback_1' (string) linux.device_file = '/dev/snd/pcmC0D1p' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/pcmC0D1p' (string)

udi = '/org/freedesktop/Hal/devices/pci_1274_5880_alsa_playback_0'
alsa.card = 0 (0x0) (int)
alsa.card_id = 'Ensoniq AudioPCI ENS1371' (string)
alsa.device = 0 (0x0) (int)
alsa.device_file = '/dev/snd/pcmC0D0p' (string)
alsa.device_id = 'ES1371 DAC2/ADC' (string)
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1274_5880' (string) alsa.pcm_class = 'generic' (string)
alsa.physical_device = '/org/freedesktop/Hal/devices/pci_1274_5880' (string) alsa.type = 'playback' (string)
info.capabilities = {'alsa'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1274_5880' (string) info.product = 'ES1371 DAC2/ADC ALSA Playback Device' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1274_5880_alsa_playback_0' (string) linux.device_file = '/dev/snd/pcmC0D0p' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/pcmC0D0p' (string)

udi = '/org/freedesktop/Hal/devices/pci_1274_5880_alsa_capture_0'
alsa.card = 0 (0x0) (int)
alsa.card_id = 'Ensoniq AudioPCI ENS1371' (string)
alsa.device = 0 (0x0) (int)
alsa.device_file = '/dev/snd/pcmC0D0c' (string)
alsa.device_id = 'ES1371 DAC2/ADC' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1274_5880' (string) alsa.pcm_class = 'generic' (string)
alsa.physical_device = '/org/freedesktop/Hal/devices/pci_1274_5880' (string) alsa.type = 'capture' (string)
info.capabilities = {'alsa'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1274_5880' (string) info.product = 'ES1371 DAC2/ADC ALSA Capture Device' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1274_5880_alsa_capture_0' (string) linux.device_file = '/dev/snd/pcmC0D0c' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/pcmC0D0c' (string)

udi = '/org/freedesktop/Hal/devices/pci_1274_5880_oss_mixer__1'
info.capabilities = {'oss'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1274_5880' (string) info.product = 'ES1371 DAC2/ADC OSS Control Device' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1274_5880_oss_mixer__1' (string) linux.device_file = '/dev/mixer' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/mixer' (string)
oss.card = 0 (0x0) (int)
oss.card_id = 'Ensoniq AudioPCI ENS1371' (string)
oss.device_file = '/dev/mixer' (string)
oss.device_id = 'ES1371 DAC2/ADC' (string)
oss.originating_device = '/org/freedesktop/Hal/devices/pci_1274_5880' (string) oss.physical_device = '/org/freedesktop/Hal/devices/pci_1274_5880' (string) oss.type = 'mixer' (string)

udi = '/org/freedesktop/Hal/devices/pci_1274_5880_alsa_midi_0'
alsa.card = 0 (0x0) (int)
alsa.card_id = 'Ensoniq AudioPCI ENS1371' (string)
alsa.device = 0 (0x0) (int)
alsa.device_file = '/dev/snd/midiC0D0' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1274_5880' (string) alsa.physical_device = '/org/freedesktop/Hal/devices/pci_1274_5880' (string) alsa.type = 'midi' (string)
info.capabilities = {'alsa'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1274_5880' (string) info.product = 'Ensoniq AudioPCI ENS1371 ALSA MIDI Device' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1274_5880_alsa_midi_0' (string) linux.device_file = '/dev/snd/midiC0D0' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/midiC0D0' (string)

udi = '/org/freedesktop/Hal/devices/pci_1274_5880_oss_midi_0'
info.capabilities = {'oss'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1274_5880' (string) info.product = 'ES1371 DAC2/ADC OSS MIDI Device' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1274_5880_oss_midi_0' (string) linux.device_file = '/dev/midi' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/midi' (string)
oss.card = 0 (0x0) (int)
oss.card_id = 'Ensoniq AudioPCI ENS1371' (string)
oss.device = 0 (0x0) (int)
oss.device_file = '/dev/midi' (string)
oss.device_id = 'ES1371 DAC2/ADC' (string)
oss.originating_device = '/org/freedesktop/Hal/devices/pci_1274_5880' (string) oss.physical_device = '/org/freedesktop/Hal/devices/pci_1274_5880' (string) oss.type = 'midi' (string)

udi = '/org/freedesktop/Hal/devices/pci_1274_5880_oss_pcm_0_0'
info.capabilities = {'oss'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1274_5880' (string) info.product = 'ES1371 DAC2/ADC OSS PCM Device' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1274_5880_oss_pcm_0_0' (string) linux.device_file = '/dev/dsp' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/dsp' (string)
oss.card = 0 (0x0) (int)
oss.card_id = 'Ensoniq AudioPCI ENS1371' (string)
oss.device = 0 (0x0) (int)
oss.device_file = '/dev/dsp' (string)
oss.device_id = 'ES1371 DAC2/ADC' (string)
oss.originating_device = '/org/freedesktop/Hal/devices/pci_1274_5880' (string) oss.physical_device = '/org/freedesktop/Hal/devices/pci_1274_5880' (string) oss.type = 'pcm' (string)

udi = '/org/freedesktop/Hal/devices/pci_1274_5880_alsa_control__1'
alsa.card = 0 (0x0) (int)
alsa.card_id = 'Ensoniq AudioPCI ENS1371' (string)
alsa.device_file = '/dev/snd/controlC0' (string) alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1274_5880' (string) alsa.physical_device = '/org/freedesktop/Hal/devices/pci_1274_5880' (string) alsa.type = 'control' (string)
info.capabilities = {'alsa'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1274_5880' (string) info.product = 'Ensoniq AudioPCI ENS1371 ALSA Control Device' (string) info.udi = '/org/freedesktop/Hal/devices/pci_1274_5880_alsa_control__1' (string) linux.device_file = '/dev/snd/controlC0' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/controlC0' (string)

udi = '/org/freedesktop/Hal/devices/pci_1274_5880_oss_pcm_0'
info.capabilities = {'oss'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1274_5880' (string) info.product = 'ES1371 DAC2/ADC OSS PCM Device' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1274_5880_oss_pcm_0' (string) linux.device_file = '/dev/audio' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/audio' (string)
oss.card = 0 (0x0) (int)
oss.card_id = 'Ensoniq AudioPCI ENS1371' (string)
oss.device = 0 (0x0) (int)
oss.device_file = '/dev/audio' (string)
oss.device_id = 'ES1371 DAC2/ADC' (string)
oss.originating_device = '/org/freedesktop/Hal/devices/pci_1274_5880' (string) oss.physical_device = '/org/freedesktop/Hal/devices/pci_1274_5880' (string) oss.type = 'pcm' (string)

udi = '/org/freedesktop/Hal/devices/pci_1274_5880_oss_pcm_1'
info.capabilities = {'oss'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1274_5880' (string) info.product = 'ES1371 DAC2/ADC OSS PCM Device' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1274_5880_oss_pcm_1' (string) linux.device_file = '/dev/adsp' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/adsp' (string)
oss.card = 0 (0x0) (int)
oss.card_id = 'Ensoniq AudioPCI ENS1371' (string)
oss.device = 1 (0x1) (int)
oss.device_file = '/dev/adsp' (string)
oss.device_id = 'ES1371 DAC2/ADC' (string)
oss.originating_device = '/org/freedesktop/Hal/devices/pci_1274_5880' (string) oss.physical_device = '/org/freedesktop/Hal/devices/pci_1274_5880' (string) oss.type = 'pcm' (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_1a31'
info.bus = 'pci' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82845 845 [Brookdale] Chipset AGP Bridge' (string) info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_1a31' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0' (string) pci.device_class = 6 (0x6) (int)

  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 4  (0x4)  (int)

pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0' (string) pci.product = '82845 845 [Brookdale] Chipset AGP Bridge' (string) pci.product_id = 6705 (0x1a31) (int) pci.subsys_product_id = 0 (0x0) (int) pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_181'
info.bus = 'pci' (string)
info.linux.driver = 'nvidia' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_1a31' (string) info.product = 'NV18 [GeForce4 MX 440 AGP 8x]' (string) info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_181' (string) info.vendor = 'nVidia Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0' (string) pci.device_class = 3 (0x3) (int)

  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)

pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0' (string) pci.product = 'NV18 [GeForce4 MX 440 AGP 8x]' (string)
pci.product_id = 385 (0x181) (int)
pci.subsys_product = 'GeForce4 MX 440 AGP 8X' (string) pci.subsys_product_id = 32867 (0x8063) (int)
pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string) pci.subsys_vendor_id = 4163 (0x1043) (int)
pci.vendor = 'nVidia Corporation' (string)
pci.vendor_id = 4318 (0x10de) (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_1a30'
info.bus = 'pci' (string)
info.linux.driver = 'agpgart-intel' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '82845 845 [Brookdale] Chipset Host Bridge' (string) info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_1a30' (string) info.vendor = 'Intel Corporation' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0' (string) pci.device_class = 6 (0x6) (int)

  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)

pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0' (string) pci.product = '82845 845 [Brookdale] Chipset Host Bridge' (string) pci.product_id = 6704 (0x1a30) (int) pci.subsys_product_id = 32880 (0x8070) (int) pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string) pci.subsys_vendor_id = 4163 (0x1043) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)

Dumped 121 device(s) from the Global Device List.
------------------------------------------------

Signature · 2 lines
Regards/Gruß,
    Boris.
#2 lore raw
Quoted 42 lines · Borislav Petkov
Quoted 39 lines · Bartlomiej Zolnierkiewicz

[ added Borislav (ide-cd maintainer) to cc: ]

Hi,

Unless there are some very important reasons to keep the discussion private please always cc: linux-ide@ and/or linux-kernel@ ML when reporting problems.

Othewise your mail misses many knowledgeable people and is left on mercy of clueless IDE maintainer... ;-)

---------- Forwarded Message ----------

Subject: IDE cdrom problem
Date: Saturday 16 February 2008
From: WaVeR <[email protected]>
To: [email protected]

Hello Bart,

Sorry to distrub you, but I have a similar problem like this post
http://lkml.org/lkml/2008/2/12/97

I'm not subscribed to linux ML, so I decide to write you directly.

Quoted 1 line

From my dmesg, I get this error:

Feb 16 08:01:58 Jupiter kernel: hdc: cdrom_pc_intr: The drive appears
confused (ireason = 0x01). Trying to recover by ending request.
Feb 16 08:06:16 Jupiter kernel: hdc: cdrom_pc_intr: The drive appears
confused (ireason = 0x01). Trying to recover by ending request.
Feb 16 08:10:45 Jupiter kernel: hdd: cdrom_pc_intr: The drive appears
confused (ireason = 0x01). Trying to recover by ending request.
Feb 16 08:37:41 Jupiter kernel: hdd: cdrom_pc_intr: The drive appears
confused (ireason = 0x01). Trying to recover by ending request.
Feb 16 08:42:10 Jupiter kernel: hdc: cdrom_pc_intr: The drive appears
confused (ireason = 0x01). Trying to recover by ending request.
Feb 16 09:00:07 Jupiter kernel: hdd: cdrom_pc_intr: The drive appears
Quoted 1 line

confused (ireason = 0x01). Trying to recover by ending request.

Quoted 1 line

Yeah, this is kinda funny, i think i've seen that somewhere :) But seriously,

Yep, this looks to be the identical problem as discussed recently:

http://www.mail-archive.com/[email protected]/msg16131.html

[ + IIRC the similar issue might be already in the kernel bugzilla... ]

Quoted 8 lines

can you try 2.6.25-rc2 - this one should be stable enough and it has the ide-cd rewrite in there and it would be interesting to see whether the new interrupt handler shows the same behaviour.

Bart, since this starts to occur often, i'm thinking of adding a debugging macro similar to the ones we rewrote in ide-floppy and ide-tape besides the CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS facility in ide-cd. What are your thoughts on the matter?

I would rather prefer to see more code removal/unification in ide-cd.

[ If the code is simple/clean enough and have informative printk()-s for
error conditions there shouldn't be a frequent need for an extra debugging information. ]

Quoted 9 lines
Quoted 9 lines

As you can see on the atached file. It's a simple IDE dvdrom and a cd burner.

I dont have this problem with the kernel 2.6.21.3

My actual kernel is:
9:28 waver@Jupiter ~% uname -a
Linux Jupiter 2.6.24.2-waver.1 #1 Wed Feb 13 23:53:31 CET 2008 i686 GNU/Linux

It would also help us if it can be narrowed down to the specific commit. Please install git package, get kernel git tree from kernel.org, and do:

git bisect start
git bisect good 2.6.21
git bisect bad 2.6.24

It will select the kernel to test - compile and boot it to see if the problem is still there. If so do "git bisect bad" which will give you new kernel to test. If the kernel works fine do "git bisect good" instead. After few iterations you should find the exact commit which introduced the bug.

Thanks,
Bart

#3 lore raw
Quoted 55 lines · Bartlomiej Zolnierkiewicz
Quoted 42 lines · Borislav Petkov
Quoted 39 lines · Bartlomiej Zolnierkiewicz

[ added Borislav (ide-cd maintainer) to cc: ]

Hi,

Unless there are some very important reasons to keep the discussion private please always cc: linux-ide@ and/or linux-kernel@ ML when reporting problems.

Othewise your mail misses many knowledgeable people and is left on mercy of clueless IDE maintainer... ;-)

---------- Forwarded Message ----------

Subject: IDE cdrom problem
Date: Saturday 16 February 2008
From: WaVeR <[email protected]>
To: [email protected]

Hello Bart,

Sorry to distrub you, but I have a similar problem like this post
http://lkml.org/lkml/2008/2/12/97

I'm not subscribed to linux ML, so I decide to write you directly.

Quoted 1 line

From my dmesg, I get this error:

Feb 16 08:01:58 Jupiter kernel: hdc: cdrom_pc_intr: The drive appears
confused (ireason = 0x01). Trying to recover by ending request.
Feb 16 08:06:16 Jupiter kernel: hdc: cdrom_pc_intr: The drive appears
confused (ireason = 0x01). Trying to recover by ending request.
Feb 16 08:10:45 Jupiter kernel: hdd: cdrom_pc_intr: The drive appears
confused (ireason = 0x01). Trying to recover by ending request.
Feb 16 08:37:41 Jupiter kernel: hdd: cdrom_pc_intr: The drive appears
confused (ireason = 0x01). Trying to recover by ending request.
Feb 16 08:42:10 Jupiter kernel: hdc: cdrom_pc_intr: The drive appears
confused (ireason = 0x01). Trying to recover by ending request.
Feb 16 09:00:07 Jupiter kernel: hdd: cdrom_pc_intr: The drive appears
Quoted 1 line

confused (ireason = 0x01). Trying to recover by ending request.

Quoted 1 line

Yeah, this is kinda funny, i think i've seen that somewhere :) But seriously,

Yep, this looks to be the identical problem as discussed recently:

http://www.mail-archive.com/[email protected]/msg16131.html

[ + IIRC the similar issue might be already in the kernel bugzilla... ]

Quoted 4 lines

can you try 2.6.25-rc2 - this one should be stable enough and it has the ide-cd rewrite in there and it would be interesting to see whether the new interrupt handler shows the same behaviour.

Quoted 6 lines
Quoted 4 lines

Bart, since this starts to occur often, i'm thinking of adding a debugging macro similar to the ones we rewrote in ide-floppy and ide-tape besides the CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS facility in ide-cd. What are your thoughts on the matter?

I would rather prefer to see more code removal/unification in ide-cd.

Yep, this is underway. Am working on removing the ide-cd internal buffer and will get back to you after testing it... Ide floppy will have to wait.

Quoted 15 lines

[ If the code is simple/clean enough and have informative printk()-s for
error conditions there shouldn't be a frequent need for an extra debugging information. ]

Quoted 9 lines
Quoted 9 lines

As you can see on the atached file. It's a simple IDE dvdrom and a cd burner.

I dont have this problem with the kernel 2.6.21.3

My actual kernel is:
9:28 waver@Jupiter ~% uname -a
Linux Jupiter 2.6.24.2-waver.1 #1 Wed Feb 13 23:53:31 CET 2008 i686 GNU/Linux

Quoted 6 lines

It would also help us if it can be narrowed down to the specific commit. Please install git package, get kernel git tree from kernel.org, and do:

git bisect start
git bisect good 2.6.21
git bisect bad 2.6.24

What would decrease the number of bisection iterations would be specifying the path for bisection, like so:

git bisect start -- drivers/ide

and then we'll nail down the evildoer significantly faster, imho.

Quoted 8 lines

It will select the kernel to test - compile and boot it to see if the problem is still there. If so do "git bisect bad" which will give you new kernel to test. If the kernel works fine do "git bisect good" instead. After few iterations you should find the exact commit which introduced the bug.

Thanks,
Bart

Signature · 2 lines
Regards/Gruß,
    Boris.
#4 lore raw

Hi,

Quoted 6 lines · Borislav Petkov
Quoted 5 lines · Bartlomiej Zolnierkiewicz
Quoted 4 lines · Borislav Petkov
Quoted 3 lines · Bartlomiej Zolnierkiewicz

[ added Borislav (ide-cd maintainer) to cc: ]

Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines

Hi,

Unless there are some very important reasons to keep the discussion private please always cc: linux-ide@ and/or linux-kernel@ ML when reporting problems.

Othewise your mail misses many knowledgeable people and is left on mercy of clueless IDE maintainer... ;-)

As I mentioned, the reason why I wrote to you directly is i'm not on the linux-ide mailing list.

Do you want me to try the 2.6.25-rc2 ? and give my feedback

Quoted 89 lines
Quoted 43 lines
Quoted 31 lines
Quoted 29 lines

---------- Forwarded Message ----------

Subject: IDE cdrom problem
Date: Saturday 16 February 2008
From: WaVeR <[email protected]>
To: [email protected]

Hello Bart,

Sorry to distrub you, but I have a similar problem like this post
http://lkml.org/lkml/2008/2/12/97

I'm not subscribed to linux ML, so I decide to write you directly.

Quoted 1 line

From my dmesg, I get this error:

Feb 16 08:01:58 Jupiter kernel: hdc: cdrom_pc_intr: The drive appears
confused (ireason = 0x01). Trying to recover by ending request.
Feb 16 08:06:16 Jupiter kernel: hdc: cdrom_pc_intr: The drive appears
confused (ireason = 0x01). Trying to recover by ending request.
Feb 16 08:10:45 Jupiter kernel: hdd: cdrom_pc_intr: The drive appears
confused (ireason = 0x01). Trying to recover by ending request.
Feb 16 08:37:41 Jupiter kernel: hdd: cdrom_pc_intr: The drive appears
confused (ireason = 0x01). Trying to recover by ending request.
Feb 16 08:42:10 Jupiter kernel: hdc: cdrom_pc_intr: The drive appears
confused (ireason = 0x01). Trying to recover by ending request.
Feb 16 09:00:07 Jupiter kernel: hdd: cdrom_pc_intr: The drive appears
Quoted 1 line

confused (ireason = 0x01). Trying to recover by ending request.

Quoted 1 line

Yeah, this is kinda funny, i think i've seen that somewhere :) But seriously,

Yep, this looks to be the identical problem as discussed recently:

http://www.mail-archive.com/[email protected]/msg16131.html

[ + IIRC the similar issue might be already in the kernel bugzilla... ]

Quoted 4 lines

can you try 2.6.25-rc2 - this one should be stable enough and it has the ide-cd rewrite in there and it would be interesting to see whether the new interrupt handler shows the same behaviour.

Quoted 6 lines
Quoted 4 lines

Bart, since this starts to occur often, i'm thinking of adding a debugging macro similar to the ones we rewrote in ide-floppy and ide-tape besides the CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS facility in ide-cd. What are your thoughts on the matter?

I would rather prefer to see more code removal/unification in ide-cd.

Yep, this is underway. Am working on removing the ide-cd internal buffer and will get back to you after testing it... Ide floppy will have to wait.

Quoted 15 lines

[ If the code is simple/clean enough and have informative printk()-s for
error conditions there shouldn't be a frequent need for an extra debugging information. ]

Quoted 9 lines
Quoted 9 lines

As you can see on the atached file. It's a simple IDE dvdrom and a cd burner.

I dont have this problem with the kernel 2.6.21.3

My actual kernel is:
9:28 waver@Jupiter ~% uname -a
Linux Jupiter 2.6.24.2-waver.1 #1 Wed Feb 13 23:53:31 CET 2008 i686 GNU/Linux

Quoted 6 lines

It would also help us if it can be narrowed down to the specific commit. Please install git package, get kernel git tree from kernel.org, and do:

git bisect start
git bisect good 2.6.21
git bisect bad 2.6.24

What would decrease the number of bisection iterations would be specifying the path for bisection, like so:

git bisect start -- drivers/ide

and then we'll nail down the evildoer significantly faster, imho.

Quoted 8 lines

It will select the kernel to test - compile and boot it to see if the problem is still there. If so do "git bisect bad" which will give you new kernel to test. If the kernel works fine do "git bisect good" instead. After few iterations you should find the exact commit which introduced the bug.

Thanks,
Bart

#5 lore raw
Quoted 15 lines · WaVeR

Hi,

Quoted 11 lines · Borislav Petkov
Quoted 10 lines · Bartlomiej Zolnierkiewicz
Quoted 9 lines · Borislav Petkov
Quoted 8 lines · Bartlomiej Zolnierkiewicz

[ added Borislav (ide-cd maintainer) to cc: ]

Hi,

Unless there are some very important reasons to keep the discussion private please always cc: linux-ide@ and/or linux-kernel@ ML when reporting problems.

Quoted 6 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

Othewise your mail misses many knowledgeable people and is left on mercy of clueless IDE maintainer... ;-)

As I mentioned, the reason why I wrote to you directly is i'm not on the linux-ide mailing list.

That doesn't matter. What Bart ment is that if you cc the mailing list, more people are going to see your bug report and the chance of the bug getting fixed is bigger.

Quoted 3 lines

Do you want me to try the 2.6.25-rc2 ? and give my feedback

Yes, please.

Quoted 89 lines
Quoted 89 lines
Quoted 43 lines
Quoted 31 lines
Quoted 29 lines

---------- Forwarded Message ----------

Subject: IDE cdrom problem
Date: Saturday 16 February 2008
From: WaVeR <[email protected]>
To: [email protected]

Hello Bart,

Sorry to distrub you, but I have a similar problem like this post
http://lkml.org/lkml/2008/2/12/97

I'm not subscribed to linux ML, so I decide to write you directly.

Quoted 1 line

From my dmesg, I get this error:

Feb 16 08:01:58 Jupiter kernel: hdc: cdrom_pc_intr: The drive appears
confused (ireason = 0x01). Trying to recover by ending request.
Feb 16 08:06:16 Jupiter kernel: hdc: cdrom_pc_intr: The drive appears
confused (ireason = 0x01). Trying to recover by ending request.
Feb 16 08:10:45 Jupiter kernel: hdd: cdrom_pc_intr: The drive appears
confused (ireason = 0x01). Trying to recover by ending request.
Feb 16 08:37:41 Jupiter kernel: hdd: cdrom_pc_intr: The drive appears
confused (ireason = 0x01). Trying to recover by ending request.
Feb 16 08:42:10 Jupiter kernel: hdc: cdrom_pc_intr: The drive appears
confused (ireason = 0x01). Trying to recover by ending request.
Feb 16 09:00:07 Jupiter kernel: hdd: cdrom_pc_intr: The drive appears
Quoted 1 line

confused (ireason = 0x01). Trying to recover by ending request.

Quoted 1 line

Yeah, this is kinda funny, i think i've seen that somewhere :) But seriously,

Yep, this looks to be the identical problem as discussed recently:

http://www.mail-archive.com/[email protected]/msg16131.html

[ + IIRC the similar issue might be already in the kernel bugzilla... ]

Quoted 4 lines

can you try 2.6.25-rc2 - this one should be stable enough and it has the ide-cd rewrite in there and it would be interesting to see whether the new interrupt handler shows the same behaviour.

Quoted 6 lines
Quoted 4 lines

Bart, since this starts to occur often, i'm thinking of adding a debugging macro similar to the ones we rewrote in ide-floppy and ide-tape besides the CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS facility in ide-cd. What are your thoughts on the matter?

I would rather prefer to see more code removal/unification in ide-cd.

Yep, this is underway. Am working on removing the ide-cd internal buffer and will get back to you after testing it... Ide floppy will have to wait.

Quoted 15 lines

[ If the code is simple/clean enough and have informative printk()-s for
error conditions there shouldn't be a frequent need for an extra debugging information. ]

Quoted 9 lines
Quoted 9 lines

As you can see on the atached file. It's a simple IDE dvdrom and a cd burner.

I dont have this problem with the kernel 2.6.21.3

My actual kernel is:
9:28 waver@Jupiter ~% uname -a
Linux Jupiter 2.6.24.2-waver.1 #1 Wed Feb 13 23:53:31 CET 2008 i686 GNU/Linux

Quoted 6 lines

It would also help us if it can be narrowed down to the specific commit. Please install git package, get kernel git tree from kernel.org, and do:

git bisect start
git bisect good 2.6.21
git bisect bad 2.6.24

What would decrease the number of bisection iterations would be specifying the path for bisection, like so:

git bisect start -- drivers/ide

and then we'll nail down the evildoer significantly faster, imho.

Quoted 8 lines

It will select the kernel to test - compile and boot it to see if the problem is still there. If so do "git bisect bad" which will give you new kernel to test. If the kernel works fine do "git bisect good" instead. After few iterations you should find the exact commit which introduced the bug.

Thanks,
Bart

Signature · 2 lines
Regards/Gruß,
    Boris.
#6 lore raw

Hi all,

Quoted 3 lines · Borislav Petkov
Quoted 1 line

Do you want me to try the 2.6.25-rc2 ? and give my feedback

Yes, please.

Until now, there's no prob with the kernel 2.6.25-rc2.

15:14 waver@Jupiter ~% uname -a
Linux Jupiter 2.6.25-rc2.waver.1 #1 Sun Feb 17 14:31:07 CET 2008 i686 GNU/Linux

Regards,

---
Hassan

#7 lore raw
Quoted 8 lines · WaVeR

Hi all,

Quoted 3 lines · Borislav Petkov
Quoted 1 line

Do you want me to try the 2.6.25-rc2 ? and give my feedback

Yes, please.

Until now, there's no prob with the kernel 2.6.25-rc2.

Cool, let me know should something show up in the logs after all.

Thanks.

Quoted 10 lines

15:14 waver@Jupiter ~% uname -a
Linux Jupiter 2.6.25-rc2.waver.1 #1 Sun Feb 17 14:31:07 CET 2008 i686 GNU/Linux

Regards,

---
Hassan

Signature · 2 lines
Regards/Gruß,
    Boris.