Skip to contentSkip to conversation

PATCH [email protected] 1 participant 1 message Feb 17, 2008 Input drivers

lore
Share & tools
lore
#0 lore raw
Quoted 1 line

From David P. Reed <[email protected]> Sat Feb 16 15:05:17 2008

Message-Id: <[email protected]>>
References: <[email protected]>>
User-Agent: quilt/0.46-1
Date: Sat, 16 Feb 2008 15:05:20 -0500
From: David P. Reed <[email protected]>
To: Thomas Gleixner <[email protected]>,
Ingo Molnar <[email protected]>,
"H. Peter Anvin" <[email protected]>
Cc: [email protected],
"David P. Reed" <[email protected]>
Subject: [PATCH 3/3] x86: fix pcspkr to not use inb_p/outb_p calls.
Content-Disposition: inline; filename=fix-pcspkr-iodelay.patch

Fix pcspkr driver to use explicit timing delay for access to PIT, rather than inb_p/outb_p calls, which use insufficiently explicit delays (defaulting to port 80 writes) that can cause freeze problems on some machines, such as Quanta moterboard machines using ENE EC's. The explicit timing delay is only needed for accesses to the 8253 PIT. The standard requirement for the 8253 to respond to successive writes is 1 microsecond. The 8253 has never been on the expansion bus, so a proper delay has nothing to do with expansion bus timing, but instead its internal logic's capability to react to input. Since udelay is correctly calibrated by the time the pcspkr driver is initialized, we use 1 microsecond as the timing.

Also shorten lines to less than 80 characters.

drivers/input/misc/pcspkr.c +11 -5
Index: linux-2.6/drivers/input/misc/pcspkr.c
===================================================================
@@ -32,9 +32,11 @@ MODULE_ALIAS("platform:pcspkr");
 static DEFINE_SPINLOCK(i8253_lock);
 #endif
 
-static int pcspkr_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
+static int pcspkr_event(struct input_dev *dev, unsigned int type,
+			unsigned int code, int value)
 {
 	unsigned int count = 0;
+	unsigned char mask;
 	unsigned long flags;
 
 	if (type != EV_SND)
@@ -51,17 +53,21 @@ static int pcspkr_event(struct input_dev
 
 	spin_lock_irqsave(&i8253_lock, flags);
 
+	mask = inb(0x61);
 	if (count) {
 		/* enable counter 2 */
-		outb_p(inb_p(0x61) | 3, 0x61);
+		outb(mask | 3, 0x61);
+		/* some 8253's may require 1 usec. between accesses */
 		/* set command for counter 2, 2 byte write */
-		outb_p(0xB6, 0x43);
+		outb(0xB6, 0x43);
+		udelay(1);
 		/* select desired HZ */
-		outb_p(count & 0xff, 0x42);
+		outb(count & 0xff, 0x42);
+		udelay(1);
 		outb((count >> 8) & 0xff, 0x42);
 	} else {
 		/* disable counter 2 */
-		outb(inb_p(0x61) & 0xFC, 0x61);
+		outb(mask & 0xFC, 0x61);
 	}
 
 	spin_unlock_irqrestore(&i8253_lock, flags);