How to dynamically disable/enable CPU features?
Hi,
I'm wondering how to disable or enable CPU features based on the board the kernel is running on. In my case I want to disable the CPU_FTR_NEED_COHERENT flag for 74xx CPUs, because it locks up the machine. I tried to clear the flag in the platform's *_probe() function with the following code:
cur_cpu_spec->cpu_features &= ~CPU_FTR_NEED_COHERENT;
First I thought that this works fine, because the kernel booted once till the console login prompt (and died afterwards). Therefore I suspected that another change or bug in the kernel conflicts with my hardware (usually the machine died much earlier on older kernels, if the flag wasn't cleared).
Now I removed all CPU_FTR_NEED_COHERENT entries from the cputable.h file and the kernel boots just fine without any lockups (reproducable). I don't quite understand the difference between dynamically clearing the flag in the platform setup code and removing the flag for all CPU defines in cputable.h. I can only suspect that clearing the flag in the platform probe function is too late, as the MMU and BATs may already be set up.
Can anybody confirm my suspicion or give me a hint how to implement it correctly? (I don't want to tinker with cputable.h)
Thanks!
regards,
Gerhard
Signature · 2 lines
Psst! Geheimtipp: Online Games kostenlos spielen bei den GMX Free Games! http://games.entertainment.web.de/de/entertainment/games/free
Quoted 21 lines · Gerhard Pircher
I'm wondering how to disable or enable CPU features based on the board the kernel is running on. In my case I want to disable the
CPU_FTR_NEED_COHERENTflag for 74xx CPUs, because it locks up the machine. I tried to clear the flag in the platform's*_probe()function with the following code:
cur_cpu_spec->cpu_features&= ~CPU_FTR_NEED_COHERENT;First I thought that this works fine, because the kernel booted once till the console login prompt (and died afterwards). Therefore I suspected that another change or bug in the kernel conflicts with my hardware (usually the machine died much earlier on older kernels, if the flag wasn't cleared).
Now I removed allCPU_FTR_NEED_COHERENTentries from thecputable.hfile and the kernel boots just fine without any lockups (reproducable). I don't quite understand the difference between dynamically clearing the flag in the platform setup code and removing the flag for all CPU defines incputable.h. I can only suspect that clearing the flag in the platform probe function is too late, as the MMU and BATs may already be set up.
Quoted 2 lines
Can anybody confirm my suspicion or give me a hint how to implement it correctly? (I don't want to tinker with
cputable.h)
We handle cpu features in a couple of ways:
(1) we replace assembly instructions with nop early in the kernel boot
(2) we test the feature flags in c code
In (2), we form two expressions for features that are
(a) always set
(b) never set
so that the compiler can eliminate the test based on the config.
To change a flag, you must make sure its in POSSIBLE but not ALWAYS, and also set it before it is used, either to nop out instructions (see early_init in setup-32.c for 32 bit), or tested by c code (in this case, maybe the initial_mmu setup is testing NEED_COHERENT, which is between early_init and probe). The code path is a bit different for 64 bit.
milton
Hi,
-------- Original-Nachricht --------
Quoted 8 lines
Datum: Fri, 22 Feb 2008 11:24:38 -0600
Von: Milton Miller <[email protected]>
An: Gerhard Pircher <[email protected]>
CC: ppcdev <[email protected]>
Betreff: Re: How to dynamically disable/enable CPU features?We handle cpu features in a couple of ways:
(1) we replace assembly instructions with nop early in the kernel boot
I'm pretty sure that is the problem.
Quoted 7 lines
(2) we test the feature flags in c code
In (2), we form two expressions for features that are
(a) always set
(b) never set
so that the compiler can eliminate the test based on the config.
Quoted 6 lines
To change a flag, you must make sure its in POSSIBLE but not ALWAYS, and also set it before it is used, either to nop out instructions (see
early_initinsetup-32.cfor 32 bit), or tested by c code (in this case, maybe theinitial_mmusetup is testingNEED_COHERENT, which is betweenearly_initand probe). The code path is a bit different for 64 bit.
The flag is in POSSIBLE. I now use this code in the platform probe function to nop out the code affected by the flag:
cur_cpu_spec->cpu_features &= ~CPU_FTR_NEED_COHERENT; /* Patch out unwanted feature. */ do_feature_fixups(cur_cpu_spec->cpu_features,
PTRRELOC(&__start___ftr_fixup), PTRRELOC(&__stop___ftr_fixup));
It seems to work so far, but I would like to know if this is the right way to do it, or if calling do_feature_fixups() more than once can have any side effects.
regards,
Gerhard
Signature · 2 lines
Psssst! Schon vom neuen GMX MultiMessenger gehört? Der kann`s mit allen: http://www.gmx.net/de/go/multimessenger
Quoted 9 lines · Gerhard Pircher
Hi,
I'm wondering how to disable or enable CPU features based on the board the kernel is running on. In my case I want to disable the
CPU_FTR_NEED_COHERENTflag for 74xx CPUs, because it locks up the machine. I tried to clear the flag in the platform's*_probe()function with the following code:
cur_cpu_spec->cpu_features&= ~CPU_FTR_NEED_COHERENT;
That works on 64 bits but unfortunately not on 32 bits. This is a longstanding issue that we need to fix. ie. we need to move the fixups later in the boot process (if possible put them in the same place for 32 and 64 bits), though that needs to be done very carefully, making sure nothing that requires those fixups ends up happening before they happen as a result of the move.
Ben.
Quoted 7 lines
The flag is in POSSIBLE. I now use this code in the platform probe function to nop out the code affected by the flag:
cur_cpu_spec->cpu_features&= ~CPU_FTR_NEED_COHERENT; /* Patch out unwanted feature. */ do_feature_fixups(cur_cpu_spec->cpu_features,
Quoted 6 lines
PTRRELOC(&__start___ftr_fixup), PTRRELOC(&__stop___ftr_fixup));It seems to work so far, but I would like to know if this is the right way to do it, or if calling
do_feature_fixups()more than once can have any side effects.
It's a bit hairy... Things -could- have been nop'ed out by the first call as a result of CPU_FTR_NEED_COHERENT being set and the second call will not be able to put them back in... now that may not be the case (depends what kind of patching is done with that flag) and so 'happen' to work for this specific bit but it isn't a nice solution...
A better long term approach is to look at moving the fixup to after the machine probe() after carefully checking whether that can cause any problem...
Ben.
-------- Original-Nachricht --------
Quoted 19 lines
Datum: Sat, 23 Feb 2008 09:32:01 +1100
Von: Benjamin Herrenschmidt <[email protected]>
An: Gerhard Pircher <[email protected]>
CC: Milton Miller <[email protected]>, [email protected]
Betreff: Re: How to dynamically disable/enable CPU features?Quoted 6 lines
The flag is in POSSIBLE. I now use this code in the platform probe function to nop out the code affected by the flag:
cur_cpu_spec->cpu_features&= ~CPU_FTR_NEED_COHERENT; /* Patch out unwanted feature. */ do_feature_fixups(cur_cpu_spec->cpu_features,Quoted 6 lines
PTRRELOC(&__start___ftr_fixup), PTRRELOC(&__stop___ftr_fixup));It seems to work so far, but I would like to know if this is the right way to do it, or if calling
do_feature_fixups()more than once can have any side effects.
Quoted 5 lines
It's a bit hairy... Things -could- have been nop'ed out by the first call as a result of
CPU_FTR_NEED_COHERENTbeing set and the second call will not be able to put them back in... now that may not be the case (depends what kind of patching is done with that flag) and so 'happen' to work for this specific bit but it isn't a nice solution...
I checked this now. Looks like it only needs to nop out some code (mainly in the hash table code).
Quoted 3 lines
A better long term approach is to look at moving the fixup to after the machine
probe()after carefully checking whether that can cause any problem...
Well, that's a job for an more experienced kernel developer. :)
Thanks!
Gerhard
Signature · 2 lines
Psssst! Schon vom neuen GMX MultiMessenger gehört? Der kann`s mit allen: http://www.gmx.net/de/go/multimessenger