Skip to contentSkip to conversation

ide: cleanup ide_setup_dma()

PATCH In review Bartlomiej Zolnierkiewicz 1 participant 1 message Mar 8, 2008 libata

lore
Share & tools
lore

Bartlomiej Zolnierkiewicz

author
#0 lore raw

PATCH 7/7 ide: cleanup ide_setup_dma()

* There is no need to call ide_release_dma_engine().

* Move the code up to (and including) ide_allocate_dma_engine() call to the callers of ide_setup_dma().

There should be no functional changes caused by this patch.

Signed-off-by Bartlomiej Zolnierkiewicz <[email protected]>
---
 drivers/ide/arm/palm_bk3710.c |    5 ++++-
 drivers/ide/ide-dma.c         |   13 -------------
 drivers/ide/setup-pci.c       |   17 +++++++++++++----
 3 files changed, 17 insertions(+), 18 deletions(-)
drivers/ide/arm/palm_bk3710.c +4 -1
Index: b/drivers/ide/arm/palm_bk3710.c
===================================================================
@@ -392,7 +392,10 @@ static int __devinit palm_bk3710_probe(s
 	hwif->mmio = 1;
 	default_hwif_mmiops(hwif);
 
-	ide_setup_dma(hwif, mem->start);
+	printk(KERN_INFO "    %s: MMIO-DMA\n", hwif->name);
+
+	if (ide_allocate_dma_engine(hwif) == 0)
+		ide_setup_dma(hwif, mem->start);
 
 	idx[0] = i;
drivers/ide/ide-dma.c +0 -13
Index: b/drivers/ide/ide-dma.c
===================================================================
@@ -841,19 +841,6 @@ EXPORT_SYMBOL_GPL(ide_allocate_dma_engin
 
 void ide_setup_dma(ide_hwif_t *hwif, unsigned long base)
 {
-	if (hwif->mmio)
-		printk(KERN_INFO "    %s: MMIO-DMA\n", hwif->name);
-	else
-		printk(KERN_INFO "    %s: BM-DMA at 0x%04lx-0x%04lx\n",
-				 hwif->name, base, base + 7);
-
-	hwif->extra_base = base + (hwif->channel ? 8 : 16);
-
-	if (ide_allocate_dma_engine(hwif)) {
-		ide_release_dma_engine(hwif);
-		return;
-	}
-
 	hwif->dma_base = base;
 
 	if (!hwif->dma_command)
drivers/ide/setup-pci.c +13 -4
Index: b/drivers/ide/setup-pci.c
===================================================================
@@ -366,15 +366,24 @@ void ide_hwif_setup_dma(ide_hwif_t *hwif
 	if ((d->host_flags & IDE_HFLAG_NO_AUTODMA) == 0 ||
 	    ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE &&
 	     (dev->class & 0x80))) {
-		unsigned long dma_base = ide_get_or_set_dma_base(d, hwif);
+		unsigned long base = ide_get_or_set_dma_base(d, hwif);
 
-		if (dma_base == 0 || ide_pci_set_master(dev, d->name) < 0)
+		if (base == 0 || ide_pci_set_master(dev, d->name) < 0)
 			goto out_disabled;
 
 		if (d->init_dma)
-			d->init_dma(hwif, dma_base);
+			d->init_dma(hwif, base);
 
-		ide_setup_dma(hwif, dma_base);
+		if (hwif->mmio)
+			printk(KERN_INFO "    %s: MMIO-DMA\n", hwif->name);
+		else
+			printk(KERN_INFO "    %s: BM-DMA at 0x%04lx-0x%04lx\n",
+					 hwif->name, base, base + 7);
+
+		hwif->extra_base = base + (hwif->channel ? 8 : 16);
+
+		if (ide_allocate_dma_engine(hwif) == 0)
+			ide_setup_dma(hwif, base);
 	}
 
 	return;