Remove trailing spaces from i2c/busses/Kconfig
PATCH 1/1 Remove trailing spaces from i2c/busses/Kconfig
Subject: remove trailing whitespaces in i2c/busses/Kconfig
From: Wolfram Sang <[email protected]>
Signed-off-by Wolfram Sang <[email protected]>
--- drivers/i2c/busses/Kconfig | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-)
drivers/i2c/busses/Kconfig +15 -15
@@ -135,7 +135,7 @@ This supports the PCF8584 ISA bus I2C adapter. Say Y if you own such an adapter. - This support is also available as a module. If so, the module + This support is also available as a module. If so, the module will be called i2c-elektor. config I2C_GPIO
@@ -190,7 +190,7 @@ select I2C_ALGOBIT help If you say yes to this option, support will be included for the Intel - 810/815 family of mainboard I2C interfaces. Specifically, the + 810/815 family of mainboard I2C interfaces. Specifically, the following versions of the chipset are supported: i810AA i810AB
@@ -248,8 +248,8 @@ tristate "IBM PPC 4xx on-chip I2C interface" depends on IBM_OCP help - Say Y here if you want to use IIC peripheral found on - embedded IBM PPC 4xx based systems. + Say Y here if you want to use IIC peripheral found on + embedded IBM PPC 4xx based systems. This driver can also be built as a module. If so, the module will be called i2c-ibm_iic.
@@ -269,7 +269,7 @@ depends on ARCH_IXP2000 select I2C_ALGOBIT help - Say Y here if you have an Intel IXP2000 (2400, 2800, 2850) based + Say Y here if you have an Intel IXP2000 (2400, 2800, 2850) based system and are using GPIO lines for an I2C bus. This support is also available as a module. If so, the module
@@ -354,7 +354,7 @@ on the parport driver. This is meant for embedded systems. Don't say Y here if you intend to say Y or M there. - This support is also available as a module. If so, the module + This support is also available as a module. If so, the module will be called i2c-parport. config I2C_PARPORT_LIGHT
@@ -372,12 +372,12 @@ the clean but heavy parport handling is not an option. The drawback is a reduced portability and the impossibility to daisy-chain other parallel port devices. - + Don't say Y here if you said Y or M to i2c-parport. Saying M to both is possible but both modules should not be loaded at the same time. - This support is also available as a module. If so, the module + This support is also available as a module. If so, the module will be called i2c-parport-light. config I2C_PASEMI
@@ -401,7 +401,7 @@ This driver is deprecated in favor of the savagefb driver. - This support is also available as a module. If so, the module + This support is also available as a module. If so, the module will be called i2c-prosavage. config I2C_S3C2410
@@ -417,7 +417,7 @@ depends on PCI select I2C_ALGOBIT help - If you say yes to this option, support will be included for the + If you say yes to this option, support will be included for the S3 Savage 4 I2C interface. This driver is deprecated in favor of the savagefb driver.
@@ -452,7 +452,7 @@ If you don't know what to do here, say N. - This support is also available as a module. If so, the module + This support is also available as a module. If so, the module will be called scx200_i2c. This driver is deprecated and will be dropped soon. Use i2c-gpio
@@ -483,14 +483,14 @@ If you don't know what to do here, say N. - This support is also available as a module. If so, the module + This support is also available as a module. If so, the module will be called scx200_acb. config I2C_SIS5595 tristate "SiS 5595" depends on PCI help - If you say yes to this option, support will be included for the + If you say yes to this option, support will be included for the SiS5595 SMBus (a subset of I2C) interface. This driver can also be built as a module. If so, the module
@@ -500,7 +500,7 @@ tristate "SiS 630/730" depends on PCI help - If you say yes to this option, support will be included for the + If you say yes to this option, support will be included for the SiS630 and SiS730 SMBus (a subset of I2C) interface. This driver can also be built as a module. If so, the module
@@ -634,7 +634,7 @@ help This driver supports ISA boards using the Philips PCA9564 parallel bus to I2C bus controller. - + This driver can also be built as a module. If so, the module will be called i2c-pca-isa.
Signature · 2 lines
Dipl.-Ing. Wolfram Sang | http://www.pengutronix.de Pengutronix - Linux Solutions for Science and Industry
_______________________________________________
i2c mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/i2c
A message that is not in the archive (sent off-list or not yet received): [email protected]
Jean Delvare
AppliedHi Wolfram,
Quoted 8 lines · Wolfram Sang
Subject: remove trailing whitespaces in i2c/busses/Kconfig
From: Wolfram Sang <[email protected]>Signed-off-by Wolfram Sang <[email protected]>--- drivers/i2c/busses/Kconfig | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-)
Applied, thanks.
Signature · 6 lines
Jean Delvare _______________________________________________ i2c mailing list [email protected] http://lists.lm-sensors.org/mailman/listinfo/i2c