ide: mark "hdx=remap" and "hdx=remap63" kernel parameters as obsoleted

PATCH New Bartlomiej Zolnierkiewicz 1 participant 1 message Mar 11, 2008

Subsystems (2)

Documentation libata

lore

Share & tools

lore

Bartlomiej Zolnierkiewicz

author

2008-03-11 20:19 UTC #0 lore raw

PATCH 3/3 ide: mark "hdx=remap" and "hdx=remap63" kernel parameters as obsoleted

Mark "hdx=remap" and "hdx=remap63" kernel parameters as obsoleted (they are layering violation and should be dealt with in the same
way as done by libata - device-mapper should be used instead).

Signed-off-by Bartlomiej Zolnierkiewicz <[email protected]>

---
 Documentation/ide/ide.txt |    5 -----
 drivers/ide/ide.c         |    4 ++--
 2 files changed, 2 insertions(+), 7 deletions(-)

Documentation/ide/ide.txt +0 -5

Index: b/Documentation/ide/ide.txt
===================================================================
@@ -203,11 +203,6 @@ Summary of ide driver parameters for ker
 
  "hdx=cyl,head,sect"	: disk drive is present, with specified geometry
 
- "hdx=remap"		: remap access of sector 0 to sector 1 (for EZDrive)
-
- "hdx=remap63"		: remap the drive: add 63 to all sector numbers
-			  (for DM OnTrack)
-
  "idex=noautotune"	: driver will NOT attempt to tune interface speed
 
  "hdx=autotune"		: driver will attempt to tune interface speed

drivers/ide/ide.c +2 -2

Index: b/drivers/ide/ide.c
===================================================================
@@ -946,10 +946,10 @@ static int __init ide_setup(char *s)
 				goto done;
 			case -12: /* "remap" */
 				drive->remap_0_to_1 = 1;
-				goto done;
+				goto obsolete_option;
 			case -13: /* "remap63" */
 				drive->sect0 = 63;
-				goto done;
+				goto obsolete_option;
 			case -14: /* "scsi" */
 				drive->scsi = 1;
 				goto obsolete_option;