software for making initrd's with raid support
Hi
I have been looking at making my system working with raid, and booting from raid. I succeded, but I had to hack a number of things, including making a new initrd by hand.
I used mkinitrd, but it did not treat sw raid, only in the md sense. this is a redhat/mandriva/pclinuxos(keldix thing, I wonder if it also used in the dbian/ubuntu world.
So what do you use for generating initrd? And does it work out of the box?
Are there any installers that have support for raid1/raid10?
BTW, I updated the howto on preventing against failure caused by a single bad disk, and I think it now kind of reflects something that works.
best regards
Keld
Quoted 9 lines · Keld Jørn Simonsen
Hi
I have been looking at making my system working with raid, and booting from raid. I succeded, but I had to hack a number of things, including making a new initrd by hand.
I used mkinitrd, but it did not treat sw raid, only in the md sense. this is a redhat/mandriva/pclinuxos(keldix thing, I wonder if it also used in the dbian/ubuntu world.
could you please explain what you mean in the above sentence, i have being maintaining mandriva mkinitrd packages for some years, and would really love to know.
L.
Signature · 10 lines
Luca Berra -- [email protected] Communication Media & Services S.r.l. /"\ \ / ASCII RIBBON CAMPAIGN X AGAINST HTML MAIL / \ -- To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 7 lines · Luca Berra
Quoted 6 lines · Keld Jørn Simonsen
Hi
I have been looking at making my system working with raid, and booting from raid. I succeded, but I had to hack a number of things, including making a new initrd by hand.
Quoted 7 lines
Quoted 3 lines
I used mkinitrd, but it did not treat sw raid, only in the md sense. this is a redhat/mandriva/pclinuxos(keldix thing, I wonder if it also used in the dbian/ubuntu world.
could you please explain what you mean in the above sentence, i have being maintaining mandriva mkinitrd packages for some years, and would really love to know.
Good! I was working on a mandriva professional 2006 system 2.6.12 kernel, and I hacked the mkinitrd to have it generate mdadm.conf etc
- it did not at all look at this. I can send you my patches, but they are in no way clean.
There was no mention of raid10 in the code either.
I thied to contact Erik Troan - the main author of mkinitrd (and lots of other stuff:-) - but got a bouncing message for his redhat address.
And I was about to report this om qa.mandriva.com - but it seems that I already made contact!
best regards
keld
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 12 lines · Keld Jørn Simonsen
Quoted 11 lines · Luca Berra
Quoted 9 lines · Keld Jørn Simonsen
Hi
I have been looking at making my system working with raid, and booting from raid. I succeded, but I had to hack a number of things, including making a new initrd by hand.
I used mkinitrd, but it did not treat sw raid, only in the md sense. this is a redhat/mandriva/pclinuxos(keldix thing, I wonder if it also used in the dbian/ubuntu world.
Quoted 5 lines
Quoted 3 lines
could you please explain what you mean in the above sentence, i have being maintaining mandriva mkinitrd packages for some years, and would really love to know.
Good! I was working on a mandriva professional 2006 system 2.6.12
2006.0 is EOL
Quoted 3 lines
kernel, and I hacked the mkinitrd to have it generate mdadm.conf etc
- it did not at all look at this. I can send you my patches, but they are in no way clean.
mkinitrd in 2006.0 did generate mdadm.conf and use it, so i don't know what your patches were doing.
Quoted 1 line
There was no mention of raid10 in the code either.
yes support for raid10 was added after 2006.0 release
Quoted 2 lines
I thied to contact Erik Troan - the main author of mkinitrd (and lots of other stuff:-) - but got a bouncing message for his redhat address.
i think Erik does not maintain mkinitrd any more, it is quite an old software.
Quoted 2 lines
And I was about to report this om qa.mandriva.com - but it seems that I already made contact!
if you want a bug fixed on mandriva please send a bug report on qa.mandriva.com, same applies for redhat/fedora.
If you have questions to ask, feel free.
L.
Signature · 10 lines
Luca Berra -- [email protected] Communication Media & Services S.r.l. /"\ \ / ASCII RIBBON CAMPAIGN X AGAINST HTML MAIL / \ -- To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 13 lines · Luca Berra
Quoted 12 lines · Keld Jørn Simonsen
Quoted 11 lines · Luca Berra
Quoted 9 lines · Keld Jørn Simonsen
Hi
I have been looking at making my system working with raid, and booting from raid. I succeded, but I had to hack a number of things, including making a new initrd by hand.
I used mkinitrd, but it did not treat sw raid, only in the md sense. this is a redhat/mandriva/pclinuxos(keldix thing, I wonder if it also used in the dbian/ubuntu world.
Quoted 6 lines
Quoted 5 lines
Quoted 3 lines
could you please explain what you mean in the above sentence, i have being maintaining mandriva mkinitrd packages for some years, and would really love to know.
Good! I was working on a mandriva professional 2006 system 2.6.12
2006.0 is EOL
2006.0 professional is maintained to 2011
Quoted 5 lines
Quoted 3 lines
kernel, and I hacked the mkinitrd to have it generate mdadm.conf etc
- it did not at all look at this. I can send you my patches, but they are in no way clean.mkinitrd in 2006.0 did generate mdadm.conf and use it, so i don't know what your patches were doing.
the code to generate mdadm.conf was not activated. I made some patches to force raid code generation.
Quoted 7 lines
Quoted 1 line
There was no mention of raid10 in the code either.
yes support for raid10 was added after 2006.0 release
Quoted 2 lines
I thied to contact Erik Troan - the main author of mkinitrd (and lots of other stuff:-) - but got a bouncing message for his redhat address.
i think Erik does not maintain mkinitrd any more, it is quite an old software.
OK, who maintains it now, and is mkinitrd still a viable - perhaps the best - way to make initrd's?
Where is the latest mkinitrd available from?
Could I use the latest mkinitrd with my 2006.0 system?
Quoted 5 lines
Quoted 2 lines
And I was about to report this om qa.mandriva.com - but it seems that I already made contact!
if you want a bug fixed on mandriva please send a bug report on qa.mandriva.com, same applies for redhat/fedora.
If you have questions to ask, feel free.
Is raid10,f2 supported under the latest haddrake2?
Best regards
keld
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 4 lines · Keld Jørn Simonsen
Quoted 2 lines
Quoted 1 line
Good! I was working on a mandriva professional 2006 system 2.6.12
2006.0 is EOL
2006.0 professional is maintained to 2011
you mean cd4?
Quoted 8 lines
Quoted 5 lines
Quoted 3 lines
kernel, and I hacked the mkinitrd to have it generate mdadm.conf etc
- it did not at all look at this. I can send you my patches, but they are in no way clean.mkinitrd in 2006.0 did generate mdadm.conf and use it, so i don't know what your patches were doing.
the code to generate mdadm.conf was not activated. I made some patches to force raid code generation.
really?
if this is the case you should have submitted a bug report.
Quoted 10 lines
Quoted 7 lines
Quoted 1 line
There was no mention of raid10 in the code either.
yes support for raid10 was added after 2006.0 release
Quoted 2 lines
I thied to contact Erik Troan - the main author of mkinitrd (and lots of other stuff:-) - but got a bouncing message for his redhat address.
i think Erik does not maintain mkinitrd any more, it is quite an old software.
OK, who maintains it now, and is mkinitrd still a viable - perhaps the best - way to make initrd's?
mkinitrd is maintained by RedHat (http://www.redhat.com/)
afaik the person responsible for that package is Peter Jones.
Mandriva up to 2008.0 used a version derived from mkinitrd 4.2.17 codebase, maintained by me. the upcoming 2008.1 will use a version derived from mkinitrd 6 codebase, maintained by Olivier Blin.
Quoted 1 line
Where is the latest mkinitrd available from?
the redhat version is avaliable from any rawhide mirror
http://mirrors.fedoraproject.org/publiclist/Fedora/development/
The mandriva version from any cooker mirror
http://wiki.mandriva.com/en/CookerMirrors
Quoted 1 line
Could I use the latest mkinitrd with my 2006.0 system?
i don't think so
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
And I was about to report this om qa.mandriva.com - but it seems that I already made contact!
if you want a bug fixed on mandriva please send a bug report on qa.mandriva.com, same applies for redhat/fedora.
If you have questions to ask, feel free.Is raid10,f2 supported under the latest haddrake2?
No.
Signature · 10 lines
Luca Berra -- [email protected] Communication Media & Services S.r.l. /"\ \ / ASCII RIBBON CAMPAIGN X AGAINST HTML MAIL / \ -- To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 7 lines · Luca Berra
Quoted 4 lines · Keld Jørn Simonsen
Quoted 2 lines
Quoted 1 line
Good! I was working on a mandriva professional 2006 system 2.6.12
2006.0 is EOL
2006.0 professional is maintained to 2011
you mean cd4?
I mean Corporate Server 4 - cs4.
Quoted 11 lines
Quoted 8 lines
Quoted 5 lines
Quoted 3 lines
kernel, and I hacked the mkinitrd to have it generate mdadm.conf etc
- it did not at all look at this. I can send you my patches, but they are in no way clean.mkinitrd in 2006.0 did generate mdadm.conf and use it, so i don't know what your patches were doing.
the code to generate mdadm.conf was not activated. I made some patches to force raid code generation.
really?
if this is the case you should have submitted a bug report.
It is possible that I do. I would like to find out what to do first, however.
Quoted 28 lines
Quoted 10 lines
Quoted 7 lines
Quoted 1 line
There was no mention of raid10 in the code either.
yes support for raid10 was added after 2006.0 release
Quoted 2 lines
I thied to contact Erik Troan - the main author of mkinitrd (and lots of other stuff:-) - but got a bouncing message for his redhat address.
i think Erik does not maintain mkinitrd any more, it is quite an old software.
OK, who maintains it now, and is mkinitrd still a viable - perhaps the best - way to make initrd's?
mkinitrd is maintained by RedHat (http://www.redhat.com/)
afaik the person responsible for that package is Peter Jones. Mandriva up to 2008.0 used a version derived from mkinitrd 4.2.17 codebase, maintained by me.
the upcoming 2008.1 will use a version derived from mkinitrd 6 codebase, maintained by Olivier Blin.Quoted 1 line
Where is the latest mkinitrd available from?
the redhat version is avaliable from any rawhide mirror
http://mirrors.fedoraproject.org/publiclist/Fedora/development/
The mandriva version from any cooker mirror
http://wiki.mandriva.com/en/CookerMirrorsQuoted 1 line
Could I use the latest mkinitrd with my 2006.0 system?
i don't think so
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
And I was about to report this om qa.mandriva.com - but it seems that I already made contact!
Quoted 7 lines
Quoted 5 lines
Quoted 3 lines
if you want a bug fixed on mandriva please send a bug report on qa.mandriva.com, same applies for redhat/fedora.
If you have questions to ask, feel free.Is raid10,f2 supported under the latest haddrake2?
No.
Thanks for your answers.
I filed a feature request for cooker on harddrake2 and drakx.
I think mkinitrd is actually used by the kernel, with a make install. Is that true? Then mkinitrd is a general script that is used on almost all linux systems. So I can assume that this is available when I write a howto.
best regards
keld
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 5 lines · Keld Jørn Simonsen
Quoted 2 lines
really?
if this is the case you should have submitted a bug report.It is possible that I do. I would like to find out what to do first, however.
in any case if i am to provide any support, i need more information on the issue you experienced.
Quoted 3 lines
Thanks for your answers.
I filed a feature request for cooker on harddrake2 and drakx.
good,
could you send me (privately) the bugzilla number?
Quoted 1 line
I think mkinitrd is actually used by the kernel, with a make install.
this is because kernel "make install" command looks for a site specific script called /sbin/installkernel.
Quoted 3 lines
Is that true? Then mkinitrd is a general script that is used on almost all linux systems. So I can assume that this is available when I write a howto.
afaik redhat, mandriva and turbolinux use a mkinitrd derived from redhat
suse uses its own mkinitrd command
debian and derivatives use initramfs-tools, or yaird
other distributions i have no knowledge.
L.
Signature · 10 lines
Luca Berra -- [email protected] Communication Media & Services S.r.l. /"\ \ / ASCII RIBBON CAMPAIGN X AGAINST HTML MAIL / \ -- To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html