PPC405EP Set EMAC noise filter bits

This bug was introduced with commit aee747f19b460a0e9da20ff21e90fdaac1cec359 which enabled CFG_4xx_GPIO_TABLE for PPC405 and unintentionally
disabled the setting of the emac noise filter bits for PPC405EP when CFG_4xx_GPIO_TABLE is set.

---

index 5d15e2f..5ed439d 100644
@@ -135,6 +135,7 @@ cpu_init_f (void)
 #if defined (CFG_GPIO0_TCR)
        out32(GPIO0_TCR, CFG_GPIO0_TCR);        /* enable output driver for outputs     */
 #endif
+#endif /* CONFIG_405E? !CFG_4xx_GPIO_TABLE */
 
 #if defined (CONFIG_405EP)
        /*

@@ -147,7 +148,6 @@ cpu_init_f (void)
         */
        mtdcr(cpc0_pci, mfdcr(cpc0_pci) | CPC0_PCI_HOST_CFG_EN | CPC0_PCI_ARBIT_EN);
 #endif /* CONFIG_405EP */
-#endif /* CONFIG_405EP */
 
 #if defined(CFG_4xx_GPIO_TABLE)
        gpio_set_chip_configuration();

Applied to u-boot-ppc4xx locally. Thanks.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================