83xx: split COBJS onto separate lines

PATCH New Anton Vorontsov 1 participant 1 message Mar 24, 2008

lore

Share & tools

lore

Anton Vorontsov

author

2008-03-24 14:40 UTC #0 lore raw

PATCH 2/5 83xx: split COBJS onto separate lines

..plus get rid of some #ifdefs in the .c files.

Signed-off-by Anton Vorontsov <[email protected]>

---

Rebased on top of today's u-boot-mpc83xx.

 cpu/mpc83xx/Makefile |   14 ++++++++++++--
 cpu/mpc83xx/fdt.c    |    4 ----
 cpu/mpc83xx/pci.c    |    2 --
 cpu/mpc83xx/qe_io.c  |    3 ---
 4 files changed, 12 insertions(+), 11 deletions(-)

cpu/mpc83xx/Makefile +12 -2

index 94a3cb8..7ad7e3e 100644
@@ -28,9 +28,19 @@ include $(TOPDIR)/config.mk
 LIB	= $(obj)lib$(CPU).a
 
 START	= start.o
-COBJS	= traps.o cpu.o cpu_init.o speed.o interrupts.o \
-	  spd_sdram.o ecc.o qe_io.o pci.o fdt.o
 
+COBJS-y += traps.o
+COBJS-y += cpu.o
+COBJS-y += cpu_init.o
+COBJS-y += speed.o
+COBJS-y += interrupts.o
+COBJS-y += spd_sdram.o
+COBJS-y += ecc.o
+COBJS-$(CONFIG_QE) += qe_io.o
+COBJS-$(CONFIG_83XX_GENERIC_PCI) += pci.o
+COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
+
+COBJS	:= $(COBJS-y)
 SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
 START	:= $(addprefix $(obj),$(START))

cpu/mpc83xx/fdt.c +0 -4

index 6f55932..d3fd78e 100644
@@ -24,9 +24,6 @@
  */
 
 #include <common.h>
-
-#if defined(CONFIG_OF_LIBFDT)
-
 #include <libfdt.h>
 #include <fdt_support.h>

@@ -68,4 +65,3 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 
 	fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
 }
-#endif /* CONFIG_OF_LIBFDT */

cpu/mpc83xx/pci.c +0 -2

index 18558db..adabf7a 100644
@@ -33,7 +33,6 @@
 
 #include <asm/mpc8349_pci.h>
 
-#ifdef CONFIG_83XX_GENERIC_PCI
 #define MAX_BUSES 2
 
 DECLARE_GLOBAL_DATA_PTR;

@@ -209,4 +208,3 @@ void ft_pci_setup(void *blob, bd_t *bd)
 	}
 }
 #endif /* CONFIG_OF_LIBFDT */
-#endif /* CONFIG_83XX_GENERIC_PCI */

cpu/mpc83xx/qe_io.c +0 -3

index 8b3937a..ce91a07 100644
@@ -25,7 +25,6 @@
 #include "asm/io.h"
 #include "asm/immap_83xx.h"
 
-#if defined(CONFIG_QE)
 #define	NUM_OF_PINS	32
 void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign)
 {

@@ -81,5 +80,3 @@ void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign)
 		out_be32(&par_io->ioport[port].ppar1, pin_2bit_assign | tmp_val);
 	}
 }
-
-#endif /* CONFIG_QE */

Signature · 1 line

1.5.2.2