PATCH: HVR-4000 support for multiproto_plus (tested on 2.6.25)
Hello,
I finally got a working patch to use my card with news tools :-)
I don't see the point on updating the wiki when I am already low on time... please don't email me question or request about this card, when I got some time, I do a little, but only when I got time...
I hope it works for other also and that it could be included before every thing change again...
I am not sure why, but I don't seems to be able to send email to [email protected] : if this don't get to it, feel free (or not) to forward it :-)
Signature · 2 lines
Grégoire FAVRE http://gregoire.favre.googlepages.com http://www.gnupg.org
http://picasaweb.google.com/Gregoire.Favre_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Am Donnerstag, 24. April 2008 21:45:30 schrieb Gregoire Favre:
Quoted 4 lines
Hello,
I finally got a working patch to use my card with news tools :-)
Hello,
I have the same card and I really appreciate your work. Thank you!
S.
Quoted 10 lines
I don't see the point on updating the wiki when I am already low on time... please don't email me question or request about this card, when I got some time, I do a little, but only when I got time...
I hope it works for other also and that it could be included before every thing change again...
I am not sure why, but I don't seems to be able to send email to [email protected] : if this don't get to it, feel free (or not) to forward it :-)
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
On Thu, Apr 24, 2008 at 10:04:38PM +0200, Sebastian Frei wrote:
Hello list,
Quoted 2 lines
I have the same card and I really appreciate your work. Thank you!
You're completey welcome, minor changes isn't such a big work, the real work was all done by others :-)
Signature · 7 lines
Grégoire FAVRE http://gregoire.favre.googlepages.com http://www.gnupg.org
http://picasaweb.google.com/Gregoire.Favre
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvbDear Gregoire
thanks for your patch. I have one problem with missing multiproto_plus/v4l/modules.order
Igor
goga:/usr/src/multiproto_plus# cat HVR-4000-multiproto_plus-2008-04-25.diff | patch -p1 --dry-run patching file linux/drivers/media/dvb/frontends/cx24116.c patching file linux/drivers/media/dvb/frontends/cx24116.h patching file linux/drivers/media/dvb/frontends/Kconfig patching file linux/drivers/media/dvb/frontends/Makefile patching file linux/drivers/media/video/cx88/cx88-cards.c patching file linux/drivers/media/video/cx88/cx88-dvb.c patching file linux/drivers/media/video/cx88/cx88.h patching file linux/drivers/media/video/cx88/cx88-i2c.c patching file linux/drivers/media/video/cx88/cx88-input.c patching file linux/drivers/media/video/cx88/Kconfig patching file linux/drivers/media/video/ir-kbd-i2c.c patching file linux/include/linux/compiler.h patching file linux/include/linux/dvb/frontend.h patching file v4l/.config.old missing header for unified diff at line 2786 of patch can't find file to patch at input line 2786 Perhaps you used the wrong -p or --strip option? The text leading up to this was: -------------------------- |diff -rubBN multiproto_plus-clean/v4l/modules.order multiproto_plus/v4l/modules.order |-- multiproto_plus-clean/v4l/modules.order 2008-04-20 11:57:43.000000000 +0200 |+++ multiproto_plus/v4l/modules.order 2008-04-24 20:44:30.000000000 +0200 -------------------------- File to patch:
Quoted 7 lines
I finally got a working patch to use my card with news tools :-)
I don't see the point on updating the wiki when I am already low on time... please don't email me question or request about this card, when I got some time, I do a little, but only when I got time...
Quoted 12 lines
I hope it works for other also and that it could be included before every thing change again...
I am not sure why, but I don't seems to be able to send email to [email protected] : if this don't get to it, feel free (or not) to forward it :-)
Signature · 4 lines
GrИgoire FAVRE http://gregoire.favre.googlepages.com http://www.gnupg.org http://picasaweb.google.com/Gregoire.Favre ATTACHMENT: application/octet-stream (HVR-4000-multiproto_plus-2008-04-25.diff.bz2)
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] PATCH: HVR-4000 support for multiproto_plus (testedon 2.6.25)
In reply to Gregoire FavreHi, Gregoire
with multiproto_plus + your hvr4000-patch I have the same problem with szap2 from dvb-apps
./szap2 -c 19 -n1
reading channels from file '19'
zapping to 1 'Pro7':
sat 0, frequency = 12722 MHz H, symbolrate 22000000, vpid = 0x00ff, apid = 0x0103 sid = 0x27d8 Querying info .. Delivery system=DVB-S
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
ioctl DVBFE_GET_INFO failed: Operation not supported
Igor
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
On Fri, Apr 25, 2008 at 10:25:13AM +0400, Igor wrote:
Hello Igor :-)
Quoted 2 lines
thanks for your patch. I have one problem with missing multiproto_plus/v4l/modules.order
Just ignore it ;-)
Signature · 7 lines
Grégoire FAVRE http://gregoire.favre.googlepages.com http://www.gnupg.org
http://picasaweb.google.com/Gregoire.Favre
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvbRe: [linux-dvb] PATCH: HVR-4000 support for multiproto_plus (testedon 2.6.25)
In reply to IgorQuoted 5 lines · On Friday 25 April 2008 09:07:13 Igor wrote:
Hi, Gregoire
with
multiproto_plus+ your hvr4000-patch I have the same problem with szap2 from dvb-apps
Quoted 8 lines
./szap2 -c 19 -n1
reading channels from file '19'
zapping to 1 'Pro7':
sat 0, frequency = 12722 MHz H, symbolrate 22000000, vpid =0x00ff, apid =0x0103sid =0x27d8Querying info .. Delivery system=DVB-S using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' ioctlDVBFE_GET_INFOfailed: Operation not supported
the patch changes the api...
you can try the attached patch, which not changes the api. that means szap2 is working (only DVB-S, for DVB-S2 you need to modify fe_params: DVB_FEC_AUTO is not supported and you have to define a modulation)
fe_params.delsys.dvbs2.fec = DVBFE_FEC_9_10; fe_params.delsys.dvbs2.modulation = DVBFE_MOD_QPSK;
with the attached patch you need to call DVB_SET_DELSYS (like in szap2)...
gernot
Quoted 9 lines
Igor
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] PATCH: HVR-4000 support for multiproto_plus (testedon 2.6.25)
Quoted 8 lines · On Friday 25 April 2008 09:07:13 Igor wrote:
Quoted 7 lines
Hi, Gregoire
with
multiproto_plus+ your hvr4000-patch I have the same problem with szap2 from dvb-apps./szap2 -c 19 -n1
Quoted 8 lines
Quoted 6 lines
reading channels from file '19'
zapping to 1 'Pro7':
sat 0, frequency = 12722 MHz H, symbolrate 22000000, vpid =0x00ff, apid =0x0103sid =0x27d8Querying info .. Delivery system=DVB-S using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' ioctlDVBFE_GET_INFOfailed: Operation not supportedthe patch changes the api...
which patch do yuo mean ?
Quoted 8 lines
you can try the attached patch, which not changes the api. that means szap2 is working (only DVB-S, for DVB-S2 you need to modify
fe_params:DVB_FEC_AUTOis not supported and you have to define a modulation)fe_params.delsys.dvbs2.fec =
DVBFE_FEC_9_10; fe_params.delsys.dvbs2.modulation =DVBFE_MOD_QPSK;with the attached patch you need to call
DVB_SET_DELSYS(like in szap2)...
could you explain me - how is it possible to modify fe_params for dvb-s2 QPSK/8PSK reception ?
Igor
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] {SPAM 05.4} Re[2]: PATCH: HVR-4000 support for multiproto_plus (testedon 2.6.25)
Quoted 15 lines · On Monday 05 May 2008 15:14:24 Igor wrote:
Quoted 15 lines · On Friday 25 April 2008 09:07:13 Igor wrote:
Quoted 13 lines
Hi, Gregoire
with
multiproto_plus+ your hvr4000-patch I have the same problem with szap2 from dvb-apps./szap2 -c 19 -n1
reading channels from file '19'
zapping to 1 'Pro7':
sat 0, frequency = 12722 MHz H, symbolrate 22000000, vpid =0x00ff, apid =0x0103sid =0x27d8Querying info .. Delivery system=DVB-S using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' ioctlDVBFE_GET_INFOfailed: Operation not supported
Quoted 3 lines
Quoted 1 line
the patch changes the api...
which patch do yuo mean ?
the patch from gregoire. it modifies dvb/frontend.h
Quoted 5 lines
Quoted 5 lines
you can try the attached patch, which not changes the api. that means szap2 is working (only DVB-S, for DVB-S2 you need to modify
fe_params:DVB_FEC_AUTOis not supported and you have to define a modulation)
Quoted 8 lines
Quoted 5 lines
fe_params.delsys.dvbs2.fec =
DVBFE_FEC_9_10; fe_params.delsys.dvbs2.modulation =DVBFE_MOD_QPSK;with the attached patch you need to call
DVB_SET_DELSYS(like in szap2)...could you explain me - how is it possible to modify
fe_paramsfor dvb-s2 QPSK/8PSK reception ?
in szap2?
szap.c 2008-05-01 14:25:16.409871814 +0200 renamed from root/dvb-apps/test/szap2.c 2008-05-01 00:40:50.048558456 +0200 +2 -1
@@ -269,7 +269,8 @@ break; case DVBS2: fe_params.delsys.dvbs2.symbol_rate = sr; - fe_params.delsys.dvbs2.fec = FEC_AUTO; + fe_params.delsys.dvbs2.fec = DVBFE_FEC_9_10; + fe_params.delsys.dvbs2.modulation = DVBFE_MOD_QPSK; printf("%s: Frequency = %d, Srate = %d\n", __func__, fe_params.frequency,
fe_params.delsys.dvbs2.symbol_rate);
break;perhaps you have to set a different fec or modulation (DVBFE_MOD_8PSK);
gernot
Quoted 2 lines
Igor
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] {SPAM 05.4} Re[2]: PATCH: HVR-4000 support for multiproto_plus (testedon 2.6.25)
Hi
thank you - your patch is working to me. But I can't use it long because I use the vdr 170 with multiproto api support. May be you can create the patch for szap2 with multiproto api support :)
Igor
-----Original Message-----
From: Gernot Pansy <[email protected]>
To: Igor <[email protected]>
Date: Mon, 5 May 2008 15:43:59 +0200
Subject: Re: {SPAM 05.4} Re[2]: [linux-dvb] PATCH: HVR-4000 support for multiproto_plus (testedon 2.6.25)
Quoted 54 lines · On Monday 05 May 2008 15:14:24 Igor wrote:
Quoted 15 lines
Quoted 15 lines · On Friday 25 April 2008 09:07:13 Igor wrote:
Quoted 13 lines
Hi, Gregoire
with
multiproto_plus+ your hvr4000-patch I have the same problem with szap2 from dvb-apps./szap2 -c 19 -n1
reading channels from file '19'
zapping to 1 'Pro7':
sat 0, frequency = 12722 MHz H, symbolrate 22000000, vpid =0x00ff, apid =0x0103sid =0x27d8Querying info .. Delivery system=DVB-S using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' ioctlDVBFE_GET_INFOfailed: Operation not supportedQuoted 3 lines
Quoted 1 line
the patch changes the api...
which patch do yuo mean ?
the patch from gregoire. it modifies
dvb/frontend.hQuoted 5 lines
Quoted 5 lines
you can try the attached patch, which not changes the api. that means szap2 is working (only DVB-S, for DVB-S2 you need to modify
fe_params:DVB_FEC_AUTOis not supported and you have to define a modulation)Quoted 8 lines
Quoted 5 lines
fe_params.delsys.dvbs2.fec =
DVBFE_FEC_9_10; fe_params.delsys.dvbs2.modulation =DVBFE_MOD_QPSK;with the attached patch you need to call
DVB_SET_DELSYS(like in szap2)...could you explain me - how is it possible to modify
fe_paramsfor dvb-s2 QPSK/8PSK reception ?in szap2?
szap.c 2008-05-01 14:25:16.409871814 +0200 renamed from root/dvb-apps/test/szap2.c 2008-05-01 00:40:50.048558456 +0200 +2
-1@@ -269,7 +269,8 @@ break; case DVBS2: fe_params.delsys.dvbs2.symbol_rate = sr; - fe_params.delsys.dvbs2.fec = FEC_AUTO; + fe_params.delsys.dvbs2.fec = DVBFE_FEC_9_10; + fe_params.delsys.dvbs2.modulation = DVBFE_MOD_QPSK; printf("%s: Frequency = %d, Srate = %d\n", __func__, fe_params.frequency, fe_params.delsys.dvbs2.symbol_rate);break;
Quoted 8 lines
perhaps you have to set a different fec or modulation (
DVBFE_MOD_8PSK);gernot
Quoted 2 lines
Igor
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb