dpt_i2o: 64 bit support (take 5)

diff -ruN orig/linux-2.6.25/drivers/scsi/dpt_i2o.c linux-2.6.25-dpt64-01/drivers/scsi/dpt_i2o.c
@@ -118,17 +114,8 @@
 static const struct file_operations adpt_fops = {
 	.ioctl		= adpt_ioctl,
 	.open		= adpt_open,
-	.release	= adpt_close
-};
-
-#ifdef REBOOT_NOTIFIER
-static struct notifier_block adpt_reboot_notifier =
-{
-	 adpt_reboot_event,
-	 NULL,
-	 0
+	.release	= adpt_close
 };
-#endif
 
 /* Structures and definitions for synchronous message posting.
  * See adpt_i2o_post_wait() for description

@@ -178,8 +175,6 @@
 	struct pci_dev *pDev = NULL;
 	adpt_hba* pHba;
 
-	adpt_init();
-
 	PINFO("Detecting Adaptec I2O RAID controllers...\n");
 
         /* search for all Adatpec I2O RAID cards */

@@ -248,7 +243,7 @@
 	}
 
 	for (pHba = hba_chain; pHba; pHba = pHba->next) {
-		if( adpt_scsi_register(pHba,sht) < 0){
+		if (adpt_scsi_host_alloc(pHba, sht) < 0){
 			adpt_i2o_delete_hba(pHba);
 			continue;
 		}

@@ -861,27 +856,6 @@
 	 printk(KERN_INFO "Adaptec I2O controllers down.\n");
 }
 
-/*
- * reboot/shutdown notification.
- *
- * - Quiesce each IOP in the system
- *
- */
-
-#ifdef REBOOT_NOTIFIER
-static int adpt_reboot_event(struct notifier_block *n, ulong code, void *p)
-{
-
-	 if(code != SYS_RESTART && code != SYS_HALT && code != SYS_POWER_OFF)
-		  return NOTIFY_DONE;
-
-	 adpt_i2o_sys_shutdown();
-
-	 return NOTIFY_DONE;
-}
-#endif
-
-
 static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev* pDev)
 {
 

@@ -1080,18 +1092,6 @@
 	}
 }
 
-
-static int adpt_init(void)
-{
-	printk("Loading Adaptec I2O RAID: Version " DPT_I2O_VERSION "\n");
-#ifdef REBOOT_NOTIFIER
-	register_reboot_notifier(&adpt_reboot_notifier);
-#endif
-
-	return 0;
-}
-
-
 static struct adpt_device* adpt_find_device(adpt_hba* pHba, u32 chan, u32 id, u32 lun)
 {
 	struct adpt_device* d;

@@ -2177,13 +2202,13 @@
 }
 
 
-static s32 adpt_scsi_register(adpt_hba* pHba,struct scsi_host_template * sht)
+static s32 adpt_scsi_host_alloc(adpt_hba* pHba, struct scsi_host_template *sht)
 {
-	struct Scsi_Host *host = NULL;
+	struct Scsi_Host *host;
 
-	host = scsi_register(sht, sizeof(adpt_hba*));
+	host = scsi_host_alloc(sht, sizeof(adpt_hba*));
 	if (host == NULL) {
-		printk ("%s: scsi_register returned NULL\n",pHba->name);
+		printk("%s: scsi_host_alloc returned NULL\n", pHba->name);
 		return -1;
 	}
 	host->hostdata[0] = (unsigned long)pHba;

@@ -3323,11 +3391,10 @@
 #endif
 
 static struct scsi_host_template driver_template = {
+	.module			= THIS_MODULE,
 	.name			= "dpt_i2o",
 	.proc_name		= "dpt_i2o",
 	.proc_info		= adpt_proc_info,
-	.detect			= adpt_detect,
-	.release		= adpt_release,
 	.info			= adpt_info,
 	.queuecommand		= adpt_queue,
 	.eh_abort_handler	= adpt_abort,

@@ -3341,5 +3408,48 @@
 	.cmd_per_lun		= 1,
 	.use_clustering		= ENABLE_CLUSTERING,
 };
-#include "scsi_module.c"
+
+static int __init adpt_init(void)
+{
+	int		error;
+	adpt_hba	*pHba, *next;
+
+	printk("Loading Adaptec I2O RAID: Version " DPT_I2O_VERSION "\n");
+
+	error = adpt_detect(&driver_template);
+	if (error < 0)
+		return error;
+	if (hba_chain == NULL)
+		return -ENODEV;
+
+	for (pHba = hba_chain; pHba; pHba = pHba->next) {
+		error = scsi_add_host(pHba->host, &pHba->pDev->dev);
+		if (error)
+			goto fail;
+		scsi_scan_host(pHba->host);
+	}
+	return 0;
+fail:
+	for (pHba = hba_chain; pHba; pHba = next) {
+		next = pHba->next;
+		scsi_remove_host(pHba->host);
+	}
+	return error;
+}
+
+static void __exit adpt_exit(void)
+{
+	adpt_hba	*pHba, *next;
+
+	for (pHba = hba_chain; pHba; pHba = pHba->next)
+		scsi_remove_host(pHba->host);
+	for (pHba = hba_chain; pHba; pHba = next) {
+		next = pHba->next;
+		adpt_release(pHba->host);
+	}
+}
+
+module_init(adpt_init);
+module_exit(adpt_exit);
+
 MODULE_LICENSE("GPL");

diff -ruN orig/linux-2.6.25/drivers/scsi/dpti.h linux-2.6.25-dpt64-01/drivers/scsi/dpti.h
@@ -84,7 +84,6 @@
 #define PCI_DPT_DEVICE_ID         (0xA501)	// DPT PCI I2O Device ID
 #define PCI_DPT_RAPTOR_DEVICE_ID  (0xA511)	
 
-//#define REBOOT_NOTIFIER 1
 /* Debugging macro from Linux Device Drivers - Rubini */
 #undef PDEBUG
 #ifdef DEBUG

@@ -264,9 +269,6 @@
 static int adpt_init(void);
 static int adpt_i2o_build_sys_table(void);
 static irqreturn_t adpt_isr(int irq, void *dev_id);
-#ifdef REBOOT_NOTIFIER
-static int adpt_reboot_event(struct notifier_block *n, ulong code, void *p);
-#endif
 
 static void adpt_i2o_report_hba_unit(adpt_hba* pHba, struct i2o_device *d);
 static int adpt_i2o_query_scalar(adpt_hba* pHba, int tid, 

@@ -289,7 +292,7 @@
 static s32 adpt_i2o_hrt_get(adpt_hba* pHba);
 static s32 adpt_scsi_to_i2o(adpt_hba* pHba, struct scsi_cmnd* cmd, struct adpt_device* dptdevice);
 static s32 adpt_i2o_to_scsi(void __iomem *reply, struct scsi_cmnd* cmd);
-static s32 adpt_scsi_register(adpt_hba* pHba,struct scsi_host_template * sht);
+static s32 adpt_scsi_host_alloc(adpt_hba* pHba,struct scsi_host_template * sht);
 static s32 adpt_hba_reset(adpt_hba* pHba);
 static s32 adpt_i2o_reset_hba(adpt_hba* pHba);
 static s32 adpt_rescan(adpt_hba* pHba);

diff -ruN linux-2.6.25/drivers/scsi/dpt_i2o.c ../linux-2.6.25-dpt64-01/drivers/scsi/dpt_i2o.c
@@ -29,11 +29,6 @@
 /*#define DEBUG 1 */
 /*#define UARTDELAY 1 */
 
-/* On the real kernel ADDR32 should always be zero for 2.4. GFP_HIGH allocates
-   high pages. Keep the macro around because of the broken unmerged ia64 tree */
-
-#define ADDR32 (0)
-
 #include <linux/module.h>
 
 MODULE_AUTHOR("Deanna Bonds, with _lots_ of help from Mark Salyzyn");

@@ -108,9 +103,10 @@
 
 static DEFINE_MUTEX(adpt_configuration_lock);
 
-static struct i2o_sys_tbl *sys_tbl = NULL;
-static int sys_tbl_ind = 0;
-static int sys_tbl_len = 0;
+static struct i2o_sys_tbl *sys_tbl;
+static dma_addr_t sys_tbl_pa;
+static int sys_tbl_ind;
+static int sys_tbl_len;
 
 static adpt_hba* hba_chain = NULL;
 static int hba_count = 0;

@@ -142,6 +138,16 @@
  *============================================================================
  */
 
+static inline u32 dma_high(dma_addr_t addr)
+{
+	return upper_32_bits(addr);
+}
+
+static inline u32 dma_low(dma_addr_t addr)
+{
+	return (u32)addr;
+}
+
 static u8 adpt_read_blink_led(adpt_hba* host)
 {
 	if(host->FwDebugBLEDflag_P != 0) {

@@ -279,11 +285,12 @@
 	u32 len;
 	u32 reqlen;
 	u8* buf;
+	dma_addr_t addr;
 	u8  scb[16];
 	s32 rcode;
 
 	memset(msg, 0, sizeof(msg));
-	buf = kmalloc(80,GFP_KERNEL|ADDR32);
+	buf = dma_alloc_coherent(&pHba->pDev->dev, 80, &addr, GFP_KERNEL);
 	if(!buf){
 		printk(KERN_ERR"%s: Could not allocate buffer\n",pHba->name);
 		return;

@@ -328,7 +335,7 @@
 	/* Now fill in the SGList and command */
 	*lenptr = len;
 	*mptr++ = 0xD0000000|direction|len;
-	*mptr++ = virt_to_bus(buf);
+	*mptr++ = addr;
 
 	// Send it on it's way
 	rcode = adpt_i2o_post_wait(pHba, msg, reqlen<<2, 120);

@@ -336,7 +343,7 @@
 		sprintf(pHba->detail, "Adaptec I2O RAID");
 		printk(KERN_INFO "%s: Inquiry Error (%d)\n",pHba->name,rcode);
 		if (rcode != -ETIME && rcode != -EINTR)
-			kfree(buf);
+			dma_free_coherent(&pHba->pDev->dev, 80, buf, addr);
 	} else {
 		memset(pHba->detail, 0, sizeof(pHba->detail));
 		memcpy(&(pHba->detail), "Vendor: Adaptec ", 16);

@@ -345,7 +352,7 @@
 		memcpy(&(pHba->detail[40]), " FW: ", 4);
 		memcpy(&(pHba->detail[44]), (u8*) &buf[32], 4);
 		pHba->detail[48] = '\0';	/* precautionary */
-		kfree(buf);
+		dma_free_coherent(&pHba->pDev->dev, 80, buf, addr);
 	}
 	adpt_i2o_status_get(pHba);
 	return ;

@@ -621,7 +628,6 @@
 	return len;
 }
 
-
 /*===========================================================================
  * Error Handling routines
  *===========================================================================

@@ -877,6 +883,9 @@
 	if (pci_set_dma_mask(pDev, DMA_32BIT_MASK))
 		return -EINVAL;
 
+	/* adapter only supports message blocks below 4GB */
+	pci_set_consistent_dma_mask(pDev, DMA_32BIT_MASK);
+
 	base_addr0_phys = pci_resource_start(pDev,0);
 	hba_map0_area_size = pci_resource_len(pDev,0);
 

@@ -1021,10 +1030,24 @@
 	if(pHba->msg_addr_virt != pHba->base_addr_virt){
 		iounmap(pHba->msg_addr_virt);
 	}
-	kfree(pHba->hrt);
-	kfree(pHba->lct);
-	kfree(pHba->status_block);
-	kfree(pHba->reply_pool);
+	if(pHba->hrt) {
+		dma_free_coherent(&pHba->pDev->dev,
+			pHba->hrt->num_entries * pHba->hrt->entry_len << 2,
+			pHba->hrt, pHba->hrt_pa);
+	}
+	if(pHba->lct) {
+		dma_free_coherent(&pHba->pDev->dev, pHba->lct_size,
+			pHba->lct, pHba->lct_pa);
+	}
+	if(pHba->status_block) {
+		dma_free_coherent(&pHba->pDev->dev, sizeof(i2o_status_block),
+			pHba->status_block, pHba->status_block_pa);
+	}
+	if(pHba->reply_pool) {
+		dma_free_coherent(&pHba->pDev->dev,
+			pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4,
+			pHba->reply_pool, pHba->reply_pool_pa);
+	}
 
 	for(d = pHba->devices; d ; d = next){
 		next = d->next;

@@ -1239,6 +1262,7 @@
 {
 	u32 msg[8];
 	u8* status;
+	dma_addr_t addr;
 	u32 m = EMPTY_QUEUE ;
 	ulong timeout = jiffies + (TMOUT_IOPRESET*HZ);
 

@@ -1261,12 +1285,13 @@
 		schedule_timeout_uninterruptible(1);
 	} while (m == EMPTY_QUEUE);
 
-	status = kzalloc(4, GFP_KERNEL|ADDR32);
+	status = dma_alloc_coherent(&pHba->pDev->dev, 4, &addr, GFP_KERNEL);
 	if(status == NULL) {
 		adpt_send_nop(pHba, m);
 		printk(KERN_ERR"IOP reset failed - no free memory.\n");
 		return -ENOMEM;
 	}
+	memset(status,0,4);
 
 	msg[0]=EIGHT_WORD_MSG_SIZE|SGL_OFFSET_0;
 	msg[1]=I2O_CMD_ADAPTER_RESET<<24|HOST_TID<<12|ADAPTER_TID;

@@ -1274,8 +1299,8 @@
 	msg[3]=0;
 	msg[4]=0;
 	msg[5]=0;
-	msg[6]=virt_to_bus(status);
-	msg[7]=0;     
+	msg[6]=dma_low(addr);
+	msg[7]=dma_high(addr);
 
 	memcpy_toio(pHba->msg_addr_virt+m, msg, sizeof(msg));
 	wmb();

@@ -1285,7 +1310,10 @@
 	while(*status == 0){
 		if(time_after(jiffies,timeout)){
 			printk(KERN_WARNING"%s: IOP Reset Timeout\n",pHba->name);
-			kfree(status);
+			/* We lose 4 bytes of "status" here, but we cannot
+			   free these because controller may awake and corrupt
+			   those bytes at any time */
+			/* dma_free_coherent(&pHba->pDev->dev, 4, buf, addr); */
 			return -ETIMEDOUT;
 		}
 		rmb();

@@ -1304,6 +1332,10 @@
 			}
 			if(time_after(jiffies,timeout)){
 				printk(KERN_ERR "%s:Timeout waiting for IOP Reset.\n",pHba->name);
+				/* We lose 4 bytes of "status" here, but we
+				   cannot free these because controller may
+				   awake and corrupt those bytes at any time */
+				/* dma_free_coherent(&pHba->pDev->dev, 4, buf, addr); */
 				return -ETIMEDOUT;
 			}
 			schedule_timeout_uninterruptible(1);

@@ -1320,7 +1352,7 @@
 		PDEBUG("%s: Reset completed.\n", pHba->name);
 	}
 
-	kfree(status);
+	dma_free_coherent(&pHba->pDev->dev, 4, status, addr);
 #ifdef UARTDELAY
 	// This delay is to allow someone attached to the card through the debug UART to 
 	// set up the dump levels that they want before the rest of the initialization sequence

@@ -1592,6 +1624,7 @@
 	u32 i = 0;
 	u32 rcode = 0;
 	void *p = NULL;
+	dma_addr_t addr;
 	ulong flags = 0;
 
 	memset(&msg, 0, MAX_MESSAGE_SIZE*4);

@@ -1646,7 +1679,7 @@
 			}
 			sg_size = sg[i].flag_count & 0xffffff;      
 			/* Allocate memory for the transfer */
-			p = kmalloc(sg_size, GFP_KERNEL|ADDR32);
+			p = dma_alloc_coherent(&pHba->pDev->dev, sg_size, &addr, GFP_KERNEL);
 			if(!p) {
 				printk(KERN_DEBUG"%s: Could not allocate SG buffer - size = %d buffer number %d of %d\n",
 						pHba->name,sg_size,i,sg_count);

@@ -1743,12 +1776,17 @@
 
 
 cleanup:
-	if (rcode != -ETIME && rcode != -EINTR)
+	if (rcode != -ETIME && rcode != -EINTR) {
+		struct sg_simple_element *sg =
+				(struct sg_simple_element*) (msg +sg_offset);
 		kfree (reply);
-	while(sg_index) {
-		if(sg_list[--sg_index]) {
-			if (rcode != -ETIME && rcode != -EINTR)
-				kfree(sg_list[sg_index]);
+		while(sg_index) {
+			if(sg_list[--sg_index]) {
+				dma_free_coherent(&pHba->pDev->dev,
+					sg[sg_index].flag_count & 0xffffff,
+					sg_list[sg_index],
+					sg[sg_index].addr_bus);
+			}
 		}
 	}
 	return rcode;

@@ -1965,7 +2003,16 @@
 				goto out;
 			}
 		}
-		reply = bus_to_virt(m);
+		if (pHba->reply_pool_pa <= m &&
+		    m < pHba->reply_pool_pa +
+			(pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4)) {
+			reply = (u8 *)pHba->reply_pool +
+						(m - pHba->reply_pool_pa);
+		} else {
+			/* Ick, we should *never* be here */
+			printk(KERN_ERR "dpti: reply frame not from pool\n");
+			reply = (u8 *)bus_to_virt(m);
+		}
 
 		if (readl(reply) & MSG_FAIL) {
 			u32 old_m = readl(reply+28); 

@@ -2008,6 +2055,7 @@
 		} else { // SCSI message
 			cmd = (struct scsi_cmnd*) readl(reply+12); 
 			if(cmd != NULL){
+				scsi_dma_unmap(cmd);
 				if(cmd->serial_number != 0) { // If not timedout
 					adpt_i2o_to_scsi(reply, cmd);
 				}

@@ -2156,7 +2204,7 @@
 	host->max_lun = 256;
 	host->max_channel = pHba->top_scsi_channel + 1;
 	host->cmd_per_lun = 1;
-	host->unique_id = (uint) pHba;
+	host->unique_id = (u32)sys_tbl_pa + pHba->unit;
 	host->sg_tablesize = pHba->sg_tablesize;
 	host->can_queue = pHba->post_fifo_size;
 

@@ -2596,11 +2644,10 @@
 static s32 adpt_i2o_init_outbound_q(adpt_hba* pHba)
 {
 	u8 *status;
+	dma_addr_t addr;
 	u32 __iomem *msg = NULL;
 	int i;
 	ulong timeout = jiffies + TMOUT_INITOUTBOUND*HZ;
-	u32* ptr;
-	u32 outbound_frame;  // This had to be a 32 bit address
 	u32 m;
 
 	do {

@@ -2619,13 +2666,14 @@
 
 	msg=(u32 __iomem *)(pHba->msg_addr_virt+m);
 
-	status = kzalloc(4, GFP_KERNEL|ADDR32);
+	status = dma_alloc_coherent(&pHba->pDev->dev, 4, &addr, GFP_KERNEL);
 	if (!status) {
 		adpt_send_nop(pHba, m);
 		printk(KERN_WARNING"%s: IOP reset failed - no free memory.\n",
 			pHba->name);
 		return -ENOMEM;
 	}
+	memset(status, 0, 4);
 
 	writel(EIGHT_WORD_MSG_SIZE| SGL_OFFSET_6, &msg[0]);
 	writel(I2O_CMD_OUTBOUND_INIT<<24 | HOST_TID<<12 | ADAPTER_TID, &msg[1]);

@@ -2634,7 +2682,7 @@
 	writel(4096, &msg[4]);		/* Host page frame size */
 	writel((REPLY_FRAME_SIZE)<<16|0x80, &msg[5]);	/* Outbound msg frame size and Initcode */
 	writel(0xD0000004, &msg[6]);		/* Simple SG LE, EOB */
-	writel(virt_to_bus(status), &msg[7]);
+	writel((u32)addr, &msg[7]);
 
 	writel(m, pHba->post_port);
 	wmb();

@@ -2649,6 +2697,10 @@
 		rmb();
 		if(time_after(jiffies,timeout)){
 			printk(KERN_WARNING"%s: Timeout Initializing\n",pHba->name);
+			/* We lose 4 bytes of "status" here, but we
+			   cannot free these because controller may
+			   awake and corrupt those bytes at any time */
+			/* dma_free_coherent(&pHba->pDev->dev, 4, status, addr); */
 			return -ETIMEDOUT;
 		}
 		schedule_timeout_uninterruptible(1);

@@ -2657,25 +2709,30 @@
 	// If the command was successful, fill the fifo with our reply
 	// message packets
 	if(*status != 0x04 /*I2O_EXEC_OUTBOUND_INIT_COMPLETE*/) {
-		kfree(status);
+		dma_free_coherent(&pHba->pDev->dev, 4, status, addr);
 		return -2;
 	}
-	kfree(status);
+	dma_free_coherent(&pHba->pDev->dev, 4, status, addr);
 
-	kfree(pHba->reply_pool);
+	if(pHba->reply_pool != NULL) {
+		dma_free_coherent(&pHba->pDev->dev,
+			pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4,
+			pHba->reply_pool, pHba->reply_pool_pa);
+	}
 
-	pHba->reply_pool = kzalloc(pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4, GFP_KERNEL|ADDR32);
+	pHba->reply_pool = dma_alloc_coherent(&pHba->pDev->dev,
+				pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4,
+				&pHba->reply_pool_pa, GFP_KERNEL);
 	if (!pHba->reply_pool) {
 		printk(KERN_ERR "%s: Could not allocate reply pool\n", pHba->name);
 		return -ENOMEM;
 	}
+	memset(pHba->reply_pool, 0 , pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4);
 
-	ptr = pHba->reply_pool;
 	for(i = 0; i < pHba->reply_fifo_size; i++) {
-		outbound_frame = (u32)virt_to_bus(ptr);
-		writel(outbound_frame, pHba->reply_port);
+		writel(pHba->reply_pool_pa + (i * REPLY_FRAME_SIZE * 4),
+			pHba->reply_port);
 		wmb();
-		ptr +=  REPLY_FRAME_SIZE;
 	}
 	adpt_i2o_status_get(pHba);
 	return 0;

@@ -2699,11 +2756,11 @@
 	u32 m;
 	u32 __iomem *msg;
 	u8 *status_block=NULL;
-	ulong status_block_bus;
 
 	if(pHba->status_block == NULL) {
-		pHba->status_block = (i2o_status_block*)
-			kmalloc(sizeof(i2o_status_block),GFP_KERNEL|ADDR32);
+		pHba->status_block = dma_alloc_coherent(&pHba->pDev->dev,
+					sizeof(i2o_status_block),
+					&pHba->status_block_pa, GFP_KERNEL);
 		if(pHba->status_block == NULL) {
 			printk(KERN_ERR
 			"dpti%d: Get Status Block failed; Out of memory. \n", 

@@ -2713,7 +2770,6 @@
 	}
 	memset(pHba->status_block, 0, sizeof(i2o_status_block));
 	status_block = (u8*)(pHba->status_block);
-	status_block_bus = virt_to_bus(pHba->status_block);
 	timeout = jiffies+TMOUT_GETSTATUS*HZ;
 	do {
 		rmb();

@@ -2738,8 +2794,8 @@
 	writel(0, &msg[3]);
 	writel(0, &msg[4]);
 	writel(0, &msg[5]);
-	writel(((u32)status_block_bus)&0xffffffff, &msg[6]);
-	writel(0, &msg[7]);
+	writel( dma_low(pHba->status_block_pa), &msg[6]);
+	writel( dma_high(pHba->status_block_pa), &msg[7]);
 	writel(sizeof(i2o_status_block), &msg[8]); // 88 bytes
 
 	//post message

@@ -2819,7 +2875,9 @@
 	}
 	do {
 		if (pHba->lct == NULL) {
-			pHba->lct = kmalloc(pHba->lct_size, GFP_KERNEL|ADDR32);
+			pHba->lct = dma_alloc_coherent(&pHba->pDev->dev,
+					pHba->lct_size, &pHba->lct_pa,
+					GFP_KERNEL);
 			if(pHba->lct == NULL) {
 				printk(KERN_CRIT "%s: Lct Get failed. Out of memory.\n",
 					pHba->name);

@@ -2835,7 +2893,7 @@
 		msg[4] = 0xFFFFFFFF;	/* All devices */
 		msg[5] = 0x00000000;	/* Report now */
 		msg[6] = 0xD0000000|pHba->lct_size;
-		msg[7] = virt_to_bus(pHba->lct);
+		msg[7] = (u32)pHba->lct_pa;
 
 		if ((ret=adpt_i2o_post_wait(pHba, msg, sizeof(msg), 360))) {
 			printk(KERN_ERR "%s: LCT Get failed (status=%#10x.\n", 

@@ -2846,7 +2904,8 @@
 
 		if ((pHba->lct->table_size << 2) > pHba->lct_size) {
 			pHba->lct_size = pHba->lct->table_size << 2;
-			kfree(pHba->lct);
+			dma_free_coherent(&pHba->pDev->dev, pHba->lct_size,
+					pHba->lct, pHba->lct_pa);
 			pHba->lct = NULL;
 		}
 	} while (pHba->lct == NULL);

@@ -2871,25 +2930,30 @@
 
 static int adpt_i2o_build_sys_table(void)
 {
-	adpt_hba* pHba = NULL;
+	adpt_hba* pHba = hba_chain;
 	int count = 0;
 
+	if (sys_tbl)
+		dma_free_coherent(&pHba->pDev->dev, sys_tbl_len,
+					sys_tbl, sys_tbl_pa);
+
 	sys_tbl_len = sizeof(struct i2o_sys_tbl) +	// Header + IOPs
 				(hba_count) * sizeof(struct i2o_sys_tbl_entry);
 
-	kfree(sys_tbl);
-
-	sys_tbl = kzalloc(sys_tbl_len, GFP_KERNEL|ADDR32);
+	sys_tbl = dma_alloc_coherent(&pHba->pDev->dev,
+				sys_tbl_len, &sys_tbl_pa, GFP_KERNEL);
 	if (!sys_tbl) {
 		printk(KERN_WARNING "SysTab Set failed. Out of memory.\n");	
 		return -ENOMEM;
 	}
+	memset(sys_tbl, 0, sys_tbl_len);
 
 	sys_tbl->num_entries = hba_count;
 	sys_tbl->version = I2OVERSION;
 	sys_tbl->change_ind = sys_tbl_ind++;
 
 	for(pHba = hba_chain; pHba; pHba = pHba->next) {
+		u64 addr;
 		// Get updated Status Block so we have the latest information
 		if (adpt_i2o_status_get(pHba)) {
 			sys_tbl->num_entries--;

@@ -2905,8 +2969,9 @@
 		sys_tbl->iops[count].frame_size = pHba->status_block->inbound_frame_size;
 		sys_tbl->iops[count].last_changed = sys_tbl_ind - 1; // ??
 		sys_tbl->iops[count].iop_capabilities = pHba->status_block->iop_capabilities;
-		sys_tbl->iops[count].inbound_low = (u32)virt_to_bus(pHba->post_port);
-		sys_tbl->iops[count].inbound_high = (u32)((u64)virt_to_bus(pHba->post_port)>>32);
+		addr = pHba->base_addr_phys + 0x40;
+		sys_tbl->iops[count].inbound_low = dma_low(addr);
+		sys_tbl->iops[count].inbound_high = dma_high(addr);
 
 		count++;
 	}

@@ -3042,7 +3107,8 @@
 
 	do {
 		if (pHba->hrt == NULL) {
-			pHba->hrt=kmalloc(size, GFP_KERNEL|ADDR32);
+			pHba->hrt = dma_alloc_coherent(&pHba->pDev->dev,
+					size, &pHba->hrt_pa, GFP_KERNEL);
 			if (pHba->hrt == NULL) {
 				printk(KERN_CRIT "%s: Hrt Get failed; Out of memory.\n", pHba->name);
 				return -ENOMEM;

@@ -3054,7 +3120,7 @@
 		msg[2]= 0;
 		msg[3]= 0;
 		msg[4]= (0xD0000000 | size);    /* Simple transaction */
-		msg[5]= virt_to_bus(pHba->hrt);   /* Dump it here */
+		msg[5]= (u32)pHba->hrt_pa;	/* Dump it here */
 
 		if ((ret = adpt_i2o_post_wait(pHba, msg, sizeof(msg),20))) {
 			printk(KERN_ERR "%s: Unable to get HRT (status=%#10x)\n", pHba->name, ret);

@@ -3062,8 +3128,10 @@
 		}
 
 		if (pHba->hrt->num_entries * pHba->hrt->entry_len << 2 > size) {
-			size = pHba->hrt->num_entries * pHba->hrt->entry_len << 2;
-			kfree(pHba->hrt);
+			int newsize = pHba->hrt->num_entries * pHba->hrt->entry_len << 2;
+			dma_free_coherent(&pHba->pDev->dev, size,
+				pHba->hrt, pHba->hrt_pa);
+			size = newsize;
 			pHba->hrt = NULL;
 		}
 	} while(pHba->hrt == NULL);

@@ -3077,33 +3145,54 @@
 			int group, int field, void *buf, int buflen)
 {
 	u16 opblk[] = { 1, 0, I2O_PARAMS_FIELD_GET, group, 1, field };
-	u8 *resblk;
+	u8 *opblk_va;
+	dma_addr_t opblk_pa;
+	u8 *resblk_va;
+	dma_addr_t resblk_pa;
 
 	int size;
 
 	/* 8 bytes for header */
-	resblk = kmalloc(sizeof(u8) * (8+buflen), GFP_KERNEL|ADDR32);
-	if (resblk == NULL) {
+	resblk_va = dma_alloc_coherent(&pHba->pDev->dev,
+			sizeof(u8) * (8 + buflen), &resblk_pa, GFP_KERNEL);
+	if (resblk_va == NULL) {
 		printk(KERN_CRIT "%s: query scalar failed; Out of memory.\n", pHba->name);
 		return -ENOMEM;
 	}
 
+	opblk_va = dma_alloc_coherent(&pHba->pDev->dev,
+			sizeof(opblk), &opblk_pa, GFP_KERNEL);
+	if (opblk_va == NULL) {
+		dma_free_coherent(&pHba->pDev->dev, sizeof(u8) * (8+buflen),
+			resblk_va, resblk_pa);
+		printk(KERN_CRIT "%s: query operatio failed; Out of memory.\n",
+			pHba->name);
+		return -ENOMEM;
+	}
 	if (field == -1)  		/* whole group */
 			opblk[4] = -1;
 
+	memcpy(opblk_va, opblk, sizeof(opblk));
 	size = adpt_i2o_issue_params(I2O_CMD_UTIL_PARAMS_GET, pHba, tid, 
-		opblk, sizeof(opblk), resblk, sizeof(u8)*(8+buflen));
+		opblk_va, opblk_pa, sizeof(opblk),
+		resblk_va, resblk_pa, sizeof(u8)*(8+buflen));
+	dma_free_coherent(&pHba->pDev->dev, sizeof(opblk), opblk_va, opblk_pa);
 	if (size == -ETIME) {
+		dma_free_coherent(&pHba->pDev->dev, sizeof(u8) * (8+buflen),
+							resblk_va, resblk_pa);
 		printk(KERN_WARNING "%s: issue params failed; Timed out.\n", pHba->name);
 		return -ETIME;
 	} else if (size == -EINTR) {
+		dma_free_coherent(&pHba->pDev->dev, sizeof(u8) * (8+buflen),
+							resblk_va, resblk_pa);
 		printk(KERN_WARNING "%s: issue params failed; Interrupted.\n", pHba->name);
 		return -EINTR;
 	}
 			
-	memcpy(buf, resblk+8, buflen);  /* cut off header */
+	memcpy(buf, resblk_va+8, buflen);  /* cut off header */
 
-	kfree(resblk);
+	dma_free_coherent(&pHba->pDev->dev, sizeof(u8) * (8+buflen),
+						resblk_va, resblk_pa);
 	if (size < 0)
 		return size;	
 

@@ -3120,10 +3209,11 @@
  *	ResultCount, ErrorInfoSize, BlockStatus and BlockSize.
  */
 static int adpt_i2o_issue_params(int cmd, adpt_hba* pHba, int tid, 
-		  void *opblk, int oplen, void *resblk, int reslen)
+		  void *opblk_va,  dma_addr_t opblk_pa, int oplen,
+		void *resblk_va, dma_addr_t resblk_pa, int reslen)
 {
 	u32 msg[9]; 
-	u32 *res = (u32 *)resblk;
+	u32 *res = (u32 *)resblk_va;
 	int wait_status;
 
 	msg[0] = NINE_WORD_MSG_SIZE | SGL_OFFSET_5;

@@ -3132,12 +3222,12 @@
 	msg[3] = 0;
 	msg[4] = 0;
 	msg[5] = 0x54000000 | oplen;	/* OperationBlock */
-	msg[6] = virt_to_bus(opblk);
+	msg[6] = (u32)opblk_pa;
 	msg[7] = 0xD0000000 | reslen;	/* ResultBlock */
-	msg[8] = virt_to_bus(resblk);
+	msg[8] = (u32)resblk_pa;
 
 	if ((wait_status = adpt_i2o_post_wait(pHba, msg, sizeof(msg), 20))) {
-		printk("adpt_i2o_issue_params: post_wait failed (%p)\n", resblk);
+		printk("adpt_i2o_issue_params: post_wait failed (%p)\n", resblk_va);
    		return wait_status; 	/* -DetailedStatus */
 	}
 

@@ -3240,7 +3330,7 @@
 	 * Private i/o space declaration  
 	 */
 	msg[6] = 0x54000000 | sys_tbl_len;
-	msg[7] = virt_to_phys(sys_tbl);
+	msg[7] = (u32)sys_tbl_pa;
 	msg[8] = 0x54000000 | 0;
 	msg[9] = 0;
 	msg[10] = 0xD4000000 | 0;

diff -ruN linux-2.6.25/drivers/scsi/dpti.h ../linux-2.6.25-dpt64-01/drivers/scsi/dpti.h
@@ -228,14 +228,18 @@
 	u32  post_fifo_size;
 	u32  reply_fifo_size;
 	u32* reply_pool;
+	dma_addr_t reply_pool_pa;
 	u32  sg_tablesize;	// Scatter/Gather List Size.       
 	u8  top_scsi_channel;
 	u8  top_scsi_id;
 	u8  top_scsi_lun;
 
 	i2o_status_block* status_block;
+	dma_addr_t status_block_pa;
 	i2o_hrt* hrt;
+	dma_addr_t hrt_pa;
 	i2o_lct* lct;
+	dma_addr_t lct_pa;
 	uint lct_size;
 	struct i2o_device* devices;
 	struct adpt_channel channel[MAX_CHANNEL];

@@ -271,7 +275,8 @@
 static const char *adpt_i2o_get_class_name(int class);
 #endif
 static int adpt_i2o_issue_params(int cmd, adpt_hba* pHba, int tid, 
-		  void *opblk, int oplen, void *resblk, int reslen);
+		  void *opblk, dma_addr_t opblk_pa, int oplen,
+		  void *resblk, dma_addr_t resblk_pa, int reslen);
 static int adpt_i2o_post_wait(adpt_hba* pHba, u32* msg, int len, int timeout);
 static int adpt_i2o_lct_get(adpt_hba* pHba);
 static int adpt_i2o_parse_lct(adpt_hba* pHba);

diff -ruN linux-2.6.25/drivers/scsi/dpt/dpti_ioctl.h ../linux-2.6.25-dpt64-02/drivers/scsi/dpt/dpti_ioctl.h
@@ -89,7 +89,7 @@
 	int      njobs;            /* # of jobs sent to HA            */
 	int      qdepth;           /* Controller queue depth.         */
 	int      wakebase;         /* mpx wakeup base index.          */
-	uLONG    SGsize;           /* Scatter/Gather list size.       */
+	uINT     SGsize;           /* Scatter/Gather list size.       */
 	unsigned heads;            /* heads for drives on cntlr.      */
 	unsigned sectors;          /* sectors for drives on cntlr.    */
 	uCHAR    do_drive32;       /* Flag for Above 16 MB Ability    */

@@ -97,8 +97,8 @@
 	char     idPAL[4];         /* 4 Bytes Of The ID Pal           */
 	uCHAR    primary;          /* 1 For Primary, 0 For Secondary  */
 	uCHAR    eataVersion;      /* EATA Version                    */
-	uLONG    cpLength;         /* EATA Command Packet Length      */
-	uLONG    spLength;         /* EATA Status Packet Length       */
+	uINT     cpLength;         /* EATA Command Packet Length      */
+	uINT     spLength;         /* EATA Status Packet Length       */
 	uCHAR    drqNum;           /* DRQ Index (0,5,6,7)             */
 	uCHAR    flag1;            /* EATA Flags 1 (Byte 9)           */
 	uCHAR    flag2;            /* EATA Flags 2 (Byte 30)          */

@@ -107,23 +107,23 @@
 typedef struct {
 	uSHORT length;		// Remaining length of this
 	uSHORT drvrHBAnum;	// Relative HBA # used by the driver
-	uLONG baseAddr;		// Base I/O address
+	uINT baseAddr;		// Base I/O address
 	uSHORT blinkState;	// Blink LED state (0=Not in blink LED)
 	uCHAR pciBusNum;	// PCI Bus # (Optional)
 	uCHAR pciDeviceNum;	// PCI Device # (Optional)
 	uSHORT hbaFlags;	// Miscellaneous HBA flags
 	uSHORT Interrupt;	// Interrupt set for this device.
 #   if (defined(_DPT_ARC))
-	uLONG baseLength;
+	uINT baseLength;
 	ADAPTER_OBJECT *AdapterObject;
 	LARGE_INTEGER DmaLogicalAddress;
 	PVOID DmaVirtualAddress;
 	LARGE_INTEGER ReplyLogicalAddress;
 	PVOID ReplyVirtualAddress;
 #   else
-	uLONG reserved1;	// Reserved for future expansion
-	uLONG reserved2;	// Reserved for future expansion
-	uLONG reserved3;	// Reserved for future expansion
+	uINT reserved1;		// Reserved for future expansion
+	uINT reserved2;		// Reserved for future expansion
+	uINT reserved3;		// Reserved for future expansion
 #   endif
 } drvrHBAinfo_S;
 

diff -ruN linux-2.6.25/drivers/scsi/dpt/dptsig.h ../linux-2.6.25-dpt64-02/drivers/scsi/dpt/dptsig.h
@@ -33,11 +33,7 @@
 /* to make sure we are talking the same size under all OS's     */
 typedef unsigned char sigBYTE;
 typedef unsigned short sigWORD;
-#if (defined(_MULTI_DATAMODEL) && defined(sun) && !defined(_ILP32))
-typedef uint32_t sigLONG;
-#else
-typedef unsigned long sigLONG;
-#endif
+typedef unsigned int sigINT;
 
 /*
  * use sigWORDLittleEndian for:

@@ -300,7 +296,7 @@
     sigBYTE dsFiletype;          /* type of file */
     sigBYTE dsFiletypeFlags;     /* flags to specify load type, etc. */
     sigBYTE dsOEM;               /* OEM file was created for */
-    sigLONG dsOS;                /* which Operating systems */
+    sigINT  dsOS;                /* which Operating systems */
     sigWORD dsCapabilities;      /* RAID levels, etc. */
     sigWORD dsDeviceSupp;        /* Types of SCSI devices supported */
     sigWORD dsAdapterSupp;       /* DPT adapter families supported */

diff -ruN linux-2.6.25/drivers/scsi/dpt/sys_info.h ../linux-2.6.25-dpt64-02/drivers/scsi/dpt/sys_info.h
@@ -145,8 +145,8 @@
    uCHAR        smartROMRevision;
    uSHORT       flags;                  /* See bit definitions above */
    uSHORT       conventionalMemSize;    /* in KB */
-   uLONG        extendedMemSize;        /* in KB */
-   uLONG        osType;                 /* Same as DPTSIG's definition */
+   uINT         extendedMemSize;        /* in KB */
+   uINT         osType;                 /* Same as DPTSIG's definition */
    uCHAR        osMajorVersion;
    uCHAR        osMinorVersion;         /* The OS version */
    uCHAR        osRevision;

468 lines not on this page · raw message

diff -ruN linux-2.6.25/drivers/scsi/dpti.h ../linux-2.6.25-dpt64-02/drivers/scsi/dpti.h
@@ -233,6 +233,7 @@
 	u8  top_scsi_channel;
 	u8  top_scsi_id;
 	u8  top_scsi_lun;
+	u8  dma64;
 
 	i2o_status_block* status_block;
 	dma_addr_t status_block_pa;

@@ -252,6 +253,7 @@
 	void __iomem *FwDebugBLEDflag_P;// Virtual Addr Of FW Debug BLED
 	void __iomem *FwDebugBLEDvalue_P;// Virtual Addr Of FW Debug BLED
 	u32 FwDebugFlags;
+	u32 *ioctl_reply_context[4];
 } adpt_hba;
 
 struct sg_simple_element {

diff -ruN linux-2.6.25-03/drivers/scsi/dpt_i2o.c linux-2.6.25-04/drivers/scsi/dpt_i2o.c
@@ -111,6 +111,8 @@
 static adpt_hba* hba_chain = NULL;
 static int hba_count = 0;
 
+static struct class *adpt_sysfs_class;
+
 #ifdef CONFIG_COMPAT
 static long compat_adpt_ioctl(struct file *, unsigned int, unsigned long);
 #endif

@@ -254,6 +256,12 @@
 		adpt_inquiry(pHba);
 	}
 
+	adpt_sysfs_class = class_create(THIS_MODULE, "dpt_i2o");
+	if (IS_ERR(adpt_sysfs_class)) {
+		printk(KERN_WARNING"dpti: unable to create dpt_i2o class\n");
+		adpt_sysfs_class = NULL;
+	}
+
 	for (pHba = hba_chain; pHba; pHba = pHba->next) {
 		if (adpt_scsi_host_alloc(pHba, sht) < 0){
 			adpt_i2o_delete_hba(pHba);

@@ -261,6 +269,16 @@
 		}
 		pHba->initialized = TRUE;
 		pHba->state &= ~DPTI_STATE_RESET;
+		if (adpt_sysfs_class) {
+			struct device *dev = device_create(adpt_sysfs_class,
+				NULL, MKDEV(DPTI_I2O_MAJOR, pHba->unit),
+				"dpti%d", pHba->unit);
+			if (IS_ERR(dev)) {
+				printk(KERN_WARNING"dpti%d: unable to "
+					"create device in dpt_i2o class\n",
+					pHba->unit);
+			}
+		}
 	}
 
 	// Register our control device node

@@ -1212,8 +1230,16 @@
 	pci_dev_put(pHba->pDev);
 	kfree(pHba);
 
+	if (adpt_sysfs_class)
+		device_destroy(adpt_sysfs_class,
+				MKDEV(DPTI_I2O_MAJOR, pHba->unit));
+
 	if(hba_count <= 0){
 		unregister_chrdev(DPTI_I2O_MAJOR, DPT_DRIVER);   
+		if (adpt_sysfs_class) {
+			class_destroy(adpt_sysfs_class);
+			adpt_sysfs_class = NULL;
+		}
 	}
 }
 

diff -puN drivers/scsi/dpt_i2o.c~drivers-scsi-dpt_i2oc-fix-build-on-alpha drivers/scsi/dpt_i2o.c
@@ -1967,45 +1967,6 @@ cleanup:
 	return rcode;
 }
 
-
-/*
- * This routine returns information about the system.  This does not effect
- * any logic and if the info is wrong - it doesn't matter.
- */
-
-/* Get all the info we can not get from kernel services */
-static int adpt_system_info(void __user *buffer)
-{
-	sysInfo_S si;
-
-	memset(&si, 0, sizeof(si));
-
-	si.osType = OS_LINUX;
-	si.osMajorVersion = 0;
-	si.osMinorVersion = 0;
-	si.osRevision = 0;
-	si.busType = SI_PCI_BUS;
-	si.processorFamily = DPTI_sig.dsProcessorFamily;
-
-#if defined __i386__ 
-	adpt_i386_info(&si);
-#elif defined (__ia64__)
-	adpt_ia64_info(&si);
-#elif defined(__sparc__)
-	adpt_sparc_info(&si);
-#elif defined (__alpha__)
-	adpt_alpha_info(&si);
-#else
-	si.processorType = 0xff ;
-#endif
-	if(copy_to_user(buffer, &si, sizeof(si))){
-		printk(KERN_WARNING"dpti: Could not copy buffer TO user\n");
-		return -EFAULT;
-	}
-
-	return 0;
-}
-
 #if defined __ia64__ 
 static void adpt_ia64_info(sysInfo_S* si)
 {

@@ -2016,7 +1977,6 @@ static void adpt_ia64_info(sysInfo_S* si
 }
 #endif
 
-
 #if defined __sparc__ 
 static void adpt_sparc_info(sysInfo_S* si)
 {

@@ -2026,7 +1986,6 @@ static void adpt_sparc_info(sysInfo_S* s
 	si->processorType = PROC_ULTRASPARC;
 }
 #endif
-
 #if defined __alpha__ 
 static void adpt_alpha_info(sysInfo_S* si)
 {

@@ -2038,7 +1997,6 @@ static void adpt_alpha_info(sysInfo_S* s
 #endif
 
 #if defined __i386__
-
 static void adpt_i386_info(sysInfo_S* si)
 {
 	// This is all the info we need for now

@@ -2059,9 +2017,45 @@ static void adpt_i386_info(sysInfo_S* si
 		break;
 	}
 }
+#endif
+
+/*
+ * This routine returns information about the system.  This does not effect
+ * any logic and if the info is wrong - it doesn't matter.
+ */
+
+/* Get all the info we can not get from kernel services */
+static int adpt_system_info(void __user *buffer)
+{
+	sysInfo_S si;
+
+	memset(&si, 0, sizeof(si));
+
+	si.osType = OS_LINUX;
+	si.osMajorVersion = 0;
+	si.osMinorVersion = 0;
+	si.osRevision = 0;
+	si.busType = SI_PCI_BUS;
+	si.processorFamily = DPTI_sig.dsProcessorFamily;
 
+#if defined __i386__
+	adpt_i386_info(&si);
+#elif defined (__ia64__)
+	adpt_ia64_info(&si);
+#elif defined(__sparc__)
+	adpt_sparc_info(&si);
+#elif defined (__alpha__)
+	adpt_alpha_info(&si);
+#else
+	si.processorType = 0xff ;
 #endif
+	if(copy_to_user(buffer, &si, sizeof(si))){
+		printk(KERN_WARNING"dpti: Could not copy buffer TO user\n");
+		return -EFAULT;
+	}
 
+	return 0;
+}
 
 static int adpt_ioctl(struct inode *inode, struct file *file, uint cmd,
 	      ulong arg)

diff -puN drivers/scsi/dpti.h~drivers-scsi-dpt_i2oc-fix-build-on-alpha drivers/scsi/dpti.h
@@ -316,19 +316,6 @@ static int adpt_close(struct inode *inod
 static void adpt_delay(int millisec);
 #endif
 
-#if defined __ia64__ 
-static void adpt_ia64_info(sysInfo_S* si);
-#endif
-#if defined __sparc__ 
-static void adpt_sparc_info(sysInfo_S* si);
-#endif
-#if defined __alpha__ 
-static void adpt_sparc_info(sysInfo_S* si);
-#endif
-#if defined __i386__
-static void adpt_i386_info(sysInfo_S* si);
-#endif
-
 #define PRINT_BUFFER_SIZE     512
 
 #define HBA_FLAGS_DBG_FLAGS_MASK         0xffff0000	// Mask for debug flags

index 8508816..bfa9f09 100644
@@ -80,7 +80,7 @@ static dpt_sig_S DPTI_sig = {
 #ifdef __i386__
 	PROC_INTEL, PROC_386 | PROC_486 | PROC_PENTIUM | PROC_SEXIUM,
 #elif defined(__ia64__)
-	PROC_INTEL, PROC_IA64,
+	PROC_INTEL, -1,
 #elif defined(__sparc__)
 	PROC_ULTRASPARC, PROC_ULTRASPARC,
 #elif defined(__alpha__)

@@ -1973,7 +1973,7 @@ static void adpt_ia64_info(sysInfo_S* si)
 	// This is all the info we need for now
 	// We will add more info as our new
 	// managmenent utility requires it
-	si->processorType = PROC_IA64;
+	si->processorType = 0xff;
 }
 #endif