2.6.25.1, stray noise in dmesg
Greetings;
I just rebooted to 2.6.25.1, and was momentarily panic'd by the messages going by early in the boot, but on putting 2&2 together, found they were just noise.
Quoted 1 line
From dmesg:
[root@coyote ~]# dmesg|grep unable
[ 2.093502] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 2.248475] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 2.454444] hub 1-0:1.0: unable to enumerate USB device on port 6
And lsusb:
[root@coyote ~]# lsusb
Bus 001 Device 011: ID 04b8:010f Seiko Epson Corp. Perfection 1250
Bus 001 Device 010: ID 046d:c510 Logitech, Inc.
Bus 001 Device 009: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC Bus 001 Device 008: ID 0409:0059 NEC Corp. HighSpeed Hub
Bus 001 Device 007: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC Bus 001 Device 006: ID 050d:0751 Belkin Components
Bus 001 Device 002: ID 0409:0059 NEC Corp. HighSpeed Hub
Bus 001 Device 001: ID 1d6b:0002
Bus 003 Device 002: ID 0451:2046 Texas Instruments, Inc. TUSB2046 Hub
Bus 003 Device 001: ID 1d6b:0001
Bus 002 Device 003: ID 06a3:8021 Saitek PLC Eclipse II Keyboard
Bus 002 Device 002: ID 04b8:0005 Seiko Epson Corp. Stylus Printer
Bus 002 Device 001: ID 1d6b:0001
Indicating 3 empty ports, which is not correct either, but everything that is plugged in is accounted for. However, if there is no device there, is it supposed to tell us? In which case it should do that 2-3 more times in dmesg.
I realize this is picking minor nits. :)
Thanks.
Signature · 6 lines
Cheers, Gene "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Shick's Law: There is no problem a good miracle can't solve.
Quoted 26 lines · Gene Heskett
Greetings;
I just rebooted to 2.6.25.1, and was momentarily panic'd by the messages going by early in the boot, but on putting 2&2 together, found they were just noise.
Quoted 1 line
From dmesg:
[root@coyote ~]# dmesg|grep unable
[ 2.093502] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 2.248475] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 2.454444] hub 1-0:1.0: unable to enumerate USB device on port 6And lsusb:
[root@coyote ~]# lsusb
Bus 001 Device 011: ID 04b8:010f Seiko Epson Corp. Perfection 1250
Bus 001 Device 010: ID 046d:c510 Logitech, Inc.
Bus 001 Device 009: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC Bus 001 Device 008: ID 0409:0059 NEC Corp. HighSpeed Hub
Bus 001 Device 007: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC Bus 001 Device 006: ID 050d:0751 Belkin Components
Bus 001 Device 002: ID 0409:0059 NEC Corp. HighSpeed Hub
Bus 001 Device 001: ID 1d6b:0002
Bus 003 Device 002: ID 0451:2046 Texas Instruments, Inc. TUSB2046 Hub
Bus 003 Device 001: ID 1d6b:0001
Bus 002 Device 003: ID 06a3:8021 Saitek PLC Eclipse II Keyboard
Bus 002 Device 002: ID 04b8:0005 Seiko Epson Corp. Stylus Printer
Bus 002 Device 001: ID 1d6b:0001
Quoted 4 lines
Indicating 3 empty ports, which is not correct either, but everything that is plugged in is accounted for. However, if there is no device there, is it supposed to tell us? In which case it should do that 2-3 more times in dmesg.
That's because your hardware is trying to enumerate a device, yet there really isn't one there at all. Blame the hardware :)
This warning is new, but it's needed as we now notice if we fail to enumerate a device that might really be there.
thanks,
greg k-h
Quoted 9 lines · Gene Heskett
I just rebooted to 2.6.25.1, and was momentarily panic'd by the messages going by early in the boot, but on putting 2&2 together, found they were just noise.
From dmesg:
[root@coyote ~]# dmesg|grep unable[ 2.093502] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 2.248475] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 2.454444] hub 1-0:1.0: unable to enumerate USB device on port 6
I'm seeing these too (hub 5-0):
USB Universal Host Controller Interface driver v3.0 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub founduhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub founduhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub founduhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub foundehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: unable to enumerate USB device on port 5
hub 5-0:1.0: unable to enumerate USB device on port 7
usb 3-1: new low speed USB device using uhci_hcd and address 2 usb 3-1: configuration #1 chosen from 1 choice
usb 4-1: new low speed USB device using uhci_hcd and address 2 usb 4-1: configuration #1 chosen from 1 choice
With 2.6.25 the 2 "unable to enumerate" lines were not there. The changing order in which USB busses are detected makes comparison awkward, but these seem to be the only new lines.
$ lsusb # with 2.6.25-git Bus 005 Device 001: ID 1d6b:0002 Bus 004 Device 002: ID 046d:c50d Logitech, Inc. Bus 004 Device 001: ID 1d6b:0001 Bus 003 Device 002: ID 05a4:9841 Ortek Technology, Inc. Bus 003 Device 001: ID 1d6b:0001 Bus 001 Device 001: ID 1d6b:0001 Bus 002 Device 001: ID 1d6b:0001
$ lsusb #with 2.6.25 Bus 005 Device 002: ID 046d:c50d Logitech, Inc. Bus 005 Device 001: ID 1d6b:0001 Bus 004 Device 002: ID 05a4:9841 Ortek Technology, Inc. Bus 004 Device 001: ID 1d6b:0001 Bus 003 Device 001: ID 1d6b:0001 Bus 002 Device 001: ID 1d6b:0002
Comparing the two there is one "new" device. Strange that "Bus 001" is missing in lsusb with 2.6.25 because dmesg does mention it as assigned.
Quoted 11 lines · Frans Pop
Quoted 9 lines · Gene Heskett
I just rebooted to 2.6.25.1, and was momentarily panic'd by the messages going by early in the boot, but on putting 2&2 together, found they were just noise.
From dmesg:
[root@coyote ~]# dmesg|grep unable[ 2.093502] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 2.248475] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 2.454444] hub 1-0:1.0: unable to enumerate USB device on port 6
Quoted 4 lines
I'm seeing these too (hub 5-0):
hub 5-0:1.0: USB hub found
hub 5-0:1.0: unable to enumerate USB device on port 5 hub 5-0:1.0: unable to enumerate USB device on port 7
I'm going to bring this up one last time.
Google currently already shows 1060 hits for this new error:
http://www.google.com/search?q=%22unable+to+enumerate+USB+device%22&ie=UTF-8&oe=UTF-8
This one is particularly interesting as it shows quite a few systems are affected: https://bugzilla.redhat.com/show_bug.cgi?id=446845
Given its apparent prevalence I'm still wondering whether this is really broken hardware in all cases or that there could be an error in detection in some cases.
Note that in my case this is not with an external hub or anything, but just the internal USB ports of the system.
One thing with this message is that because of its "error" status, it also shows when the system is booted with the "quiet" option. Could it be an option to apply the following patch so that at least that is avoided?
---
From: Frans Pop <[email protected]>
usb core: lower severity of 'unable to enumerate USB device' message
This message is relatively common and in most cases can be safely ignored. Lower its severity from 'err' to 'notice' so it is not printed on the console when systems are booted with the "quiet" boot parameter.
drivers/usb/core/hub.c +1 -1
@@ -2756,7 +2756,7 @@ loop:if (hub->hdev->parent || !hcd->driver->port_handed_over || !(hcd->driver->port_handed_over)(hcd, port1)) -dev_err (hub_dev,"unable to enumerate USB device on port %d\n" , +dev_notice (hub_dev,"unable to enumerate USB device on port %d\n" , port1); done:
Quoted 29 lines · Frans Pop
Quoted 11 lines · Frans Pop
Quoted 9 lines · Gene Heskett
I just rebooted to 2.6.25.1, and was momentarily panic'd by the messages going by early in the boot, but on putting 2&2 together, found they were just noise.
From dmesg:
[root@coyote ~]# dmesg|grep unable[ 2.093502] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 2.248475] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 2.454444] hub 1-0:1.0: unable to enumerate USB device on port 6Quoted 4 lines
I'm seeing these too (hub 5-0):
hub 5-0:1.0: USB hub found
hub 5-0:1.0: unable to enumerate USB device on port 5 hub 5-0:1.0: unable to enumerate USB device on port 7I'm going to bring this up one last time.
Google currently already shows 1060 hits for this new error:
http://www.google.com/search?q=%22unable+to+enumerate+USB+device%22&ie=UTF-8&oe=UTF-8This one is particularly interesting as it shows quite a few systems are affected: https://bugzilla.redhat.com/show_bug.cgi?id=446845
Given its apparent prevalence I'm still wondering whether this is really broken hardware in all cases or that there could be an error in detection in some cases.
Quoted 6 lines
Note that in my case this is not with an external hub or anything, but just the internal USB ports of the system.
One thing with this message is that because of its "error" status, it also shows when the system is booted with the "quiet" option. Could it be an option to apply the following patch so that at least that is avoided?
I agree, I'll change the message to be this, thanks for the patch.
greg k-h
Quoted 10 lines · Greg KH
Quoted 9 lines · Frans Pop
Quoted 4 lines · Frans Pop
I'm seeing these too (hub 5-0):
hub 5-0:1.0: USB hub found
hub 5-0:1.0: unable to enumerate USB device on port 5 hub 5-0:1.0: unable to enumerate USB device on port 7Note that in my case this is not with an external hub or anything, but just the internal USB ports of the system.
Quoted 6 lines
Quoted 4 lines
One thing with this message is that because of its "error" status, it also shows when the system is booted with the "quiet" option. Could it be an option to apply the following patch so that at least that is avoided?
I agree, I'll change the message to be this, thanks for the patch.
I'm not sure that it is needed anymore. Looks like for me the messages have disappeared with -rc5, probably due to 3a31155cfff0935e (Alan Stern, "USB: EHCI: suppress unwanted error messages").
So it wasn't broken hardware after all :-)
If that solves all or most cases the error was being hit, lowering its severity is probably not needed.
Cheers,
FJP
Quoted 18 lines · Frans Pop
Quoted 10 lines · Greg KH
Quoted 9 lines · Frans Pop
Quoted 4 lines · Frans Pop
I'm seeing these too (hub 5-0):
hub 5-0:1.0: USB hub found
hub 5-0:1.0: unable to enumerate USB device on port 5 hub 5-0:1.0: unable to enumerate USB device on port 7Note that in my case this is not with an external hub or anything, but just the internal USB ports of the system.
Quoted 6 lines
Quoted 4 lines
One thing with this message is that because of its "error" status, it also shows when the system is booted with the "quiet" option. Could it be an option to apply the following patch so that at least that is avoided?
I agree, I'll change the message to be this, thanks for the patch.
Quoted 7 lines
I'm not sure that it is needed anymore. Looks like for me the messages have disappeared with -rc5, probably due to
3a31155cfff0935e(Alan Stern, "USB: EHCI: suppress unwanted error messages").
So it wasn't broken hardware after all :-)If that solves all or most cases the error was being hit, lowering its severity is probably not needed.
Ah, nevermind then, I'll not worry about this :)
thanks,
greg k-h