Skip to contentSkip to conversation

ocfs2: use simple_read_from_buffer

PATCH New Akinobu Mita 3 participants 4 messages Jun 1, 2008 2 messages not in the archive

Subsystems (2)
lore
Share & tools
lore
#2 lore raw

PATCH 18/23 aty: use memory_read_from_buffer

In reply to a message not in the archive
---
 drivers/video/aty/radeon_base.c |   11 ++---------
 1 file changed, 2 insertions(+), 9 deletions(-)
drivers/video/aty/radeon_base.c +2 -9
Index: 2.6-git/drivers/video/aty/radeon_base.c
===================================================================
@@ -70,6 +70,7 @@
 #include <linux/pci.h>
 #include <linux/vmalloc.h>
 #include <linux/device.h>
+#include <linux/fs.h>
 
 #include <asm/io.h>
 #include <linux/uaccess.h>
@@ -2098,15 +2099,7 @@ static void radeon_identify_vram(struct 
 
 static ssize_t radeon_show_one_edid(char *buf, loff_t off, size_t count, const u8 *edid)
 {
-	if (off > EDID_LENGTH)
-		return 0;
-
-	if (off + count > EDID_LENGTH)
-		count = EDID_LENGTH - off;
-
-	memcpy(buf, edid + off, count);
-
-	return count;
+	return memory_read_from_buffer(buf, count, &off, edid, EDID_LENGTH);
 }
 
 
Signature · 4 lines
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
Acked-by
#4 lore raw

Re: [patch 05/23] isdn: use simple_read_from_buffer

In reply to a message not in the archive
Quoted 1 line · On Mon, Jun 02, 2008 at 12:00:22AM +0900, [email protected] wrote:
Quoted 49 lines
Cc Karsten Keil <[email protected]>
---
 drivers/isdn/hysdn/hysdn_procconf.c |   27 +++++++--------------------
 1 file changed, 7 insertions(+), 20 deletions(-)

Index: 2.6-git/drivers/isdn/hysdn/hysdn_procconf.c
===================================================================

drivers/isdn/hysdn/hysdn_procconf.c +7 -20
@@ -207,30 +207,17 @@ hysdn_conf_write(struct file *file, cons
 /* read conf file -> output card info data */
 /*******************************************/
 static ssize_t
-hysdn_conf_read(struct file *file, char __user *buf, size_t count, loff_t * off)
+hysdn_conf_read(struct file *file, char __user *buf, size_t count, loff_t *off)
 {
 	char *cp;
-	int i;
 
-	if (file->f_mode & FMODE_READ) {
-		if (!(cp = file->private_data))
-			return (-EFAULT);	/* should never happen */
-		i = strlen(cp);	/* get total string length */
-		if (*off < i) {
-			/* still bytes to transfer */
-			cp += *off;	/* point to desired data offset */
-			i -= *off;	/* remaining length */
-			if (i > count)
-				i = count;	/* limit length to transfer */
-			if (copy_to_user(buf, cp, i))
-				return (-EFAULT);	/* copy error */
-			*off += i;	/* adjust offset */
-		} else
-			return (0);
-	} else
-		return (-EPERM);	/* no permission to read */
+	if (!(file->f_mode & FMODE_READ))
+		return -EPERM;	/* no permission to read */
 
-	return (i);
+	if (!(cp = file->private_data))
+		return -EFAULT;	/* should never happen */
+
+	return simple_read_from_buffer(buf, count, off, cp, strlen(cp));
 }				/* hysdn_conf_read */
 
 /******************/
Signature · 1 line
-- 
Signature · 4 lines
Karsten Keil
SuSE Labs
ISDN and VOIP development
SUSE LINUX Products GmbH, Maxfeldstr.5 90409 Nuernberg, GF: Markus Rex, HRB 16746 (AG Nuernberg)
Acked-by
#5 lore raw

Re: [patch 05/23] isdn: use simple_read_from_buffer

In reply to a message not in the archive
Quoted 1 line · On Mon, Jun 02, 2008 at 12:00:22AM +0900, [email protected] wrote:
Quoted 49 lines
Cc Karsten Keil <[email protected]>
---
 drivers/isdn/hysdn/hysdn_procconf.c |   27 +++++++--------------------
 1 file changed, 7 insertions(+), 20 deletions(-)

Index: 2.6-git/drivers/isdn/hysdn/hysdn_procconf.c
===================================================================

drivers/isdn/hysdn/hysdn_procconf.c +7 -20
@@ -207,30 +207,17 @@ hysdn_conf_write(struct file *file, cons
 /* read conf file -> output card info data */
 /*******************************************/
 static ssize_t
-hysdn_conf_read(struct file *file, char __user *buf, size_t count, loff_t * off)
+hysdn_conf_read(struct file *file, char __user *buf, size_t count, loff_t *off)
 {
 	char *cp;
-	int i;
 
-	if (file->f_mode & FMODE_READ) {
-		if (!(cp = file->private_data))
-			return (-EFAULT);	/* should never happen */
-		i = strlen(cp);	/* get total string length */
-		if (*off < i) {
-			/* still bytes to transfer */
-			cp += *off;	/* point to desired data offset */
-			i -= *off;	/* remaining length */
-			if (i > count)
-				i = count;	/* limit length to transfer */
-			if (copy_to_user(buf, cp, i))
-				return (-EFAULT);	/* copy error */
-			*off += i;	/* adjust offset */
-		} else
-			return (0);
-	} else
-		return (-EPERM);	/* no permission to read */
+	if (!(file->f_mode & FMODE_READ))
+		return -EPERM;	/* no permission to read */
 
-	return (i);
+	if (!(cp = file->private_data))
+		return -EFAULT;	/* should never happen */
+
+	return simple_read_from_buffer(buf, count, off, cp, strlen(cp));
 }				/* hysdn_conf_read */
 
 /******************/
Signature · 1 line
-- 
Signature · 4 lines
Karsten Keil
SuSE Labs
ISDN and VOIP development
SUSE LINUX Products GmbH, Maxfeldstr.5 90409 Nuernberg, GF: Markus Rex, HRB 16746 (AG Nuernberg)