RFC [PATCH] x86: make generic arch support NUMAQ

index d10e727..1b12ac1 100644
@@ -217,7 +217,7 @@ static char *vidmem;
 static int vidport;
 static int lines, cols;
 
-#ifdef CONFIG_X86_NUMAQ
+#if defined(CONFIG_X86_NUMAQ) || defined(CONFIG_X86_GENERICARCH)
 void *xquad_portio;
 #endif
 

index 9dbe7e9..db9efcd 100644
@@ -1715,7 +1715,6 @@ void disable_IO_APIC(void)
  * by Matt Domsch <[email protected]>  Tue Dec 21 12:25:05 CST 1999
  */
 
-#ifndef CONFIG_X86_NUMAQ
 static void __init setup_ioapic_ids_from_mpc(void)
 {
 	union IO_APIC_reg_00 reg_00;

@@ -1725,6 +1724,11 @@ static void __init setup_ioapic_ids_from_mpc(void)
 	unsigned char old_id;
 	unsigned long flags;
 
+#if defined(CONFIG_X86_NUMAQ) || defined(CONFIG_X86_GENERICARCH)
+	if (found_numaq)
+		return;
+#endif
+
 	/*
 	 * Don't check I/O APIC IDs for xAPIC systems.  They have
 	 * no meaning without the serial APIC bus.

@@ -1821,9 +1825,6 @@ static void __init setup_ioapic_ids_from_mpc(void)
 			apic_printk(APIC_VERBOSE, " ok.\n");
 	}
 }
-#else
-static void __init setup_ioapic_ids_from_mpc(void) { }
-#endif
 
 int no_timer_check __initdata;
 

131 lines not on this page · raw message

index 56f5d07..44ab680 100644
@@ -94,7 +94,6 @@ static inline unsigned int get_timer_irqs(int cpu)
 #endif
 }
 
-#ifdef CONFIG_X86_64
 /* Run after command line and cpu_init init, but before all other checks */
 void nmi_watchdog_default(void)
 {

@@ -102,7 +101,6 @@ void nmi_watchdog_default(void)
 		return;
 	nmi_watchdog = NMI_NONE;
 }
-#endif
 
 #ifdef CONFIG_SMP
 /*

index 66c43c2..74e81bf 100644
@@ -36,8 +36,6 @@
 
 #define	MB_TO_PAGES(addr) ((addr) << (20 - PAGE_SHIFT))
 
-int found_numaq;
-
 /*
  * Function: smp_dump_qct()
  *

@@ -105,13 +103,3 @@ static int __init numaq_tsc_disable(void)
 }
 arch_initcall(numaq_tsc_disable);
 
-#ifdef CONFIG_ACPI
-/*
- * Dummy implementation:
- */
-struct pci_bus * __devinit
-pci_acpi_scan_root(struct acpi_device *device, int domain, int busnum)
-{
-	return NULL;
-}
-#endif

index c5ae751..bd1c195 100644
@@ -16,6 +16,9 @@
 #include <asm/apicdef.h>
 #include <asm/genapic.h>
 
+#ifdef CONFIG_NUMA
+extern struct genapic apic_numaq;
+#endif
 extern struct genapic apic_summit;
 extern struct genapic apic_bigsmp;
 extern struct genapic apic_es7000;

@@ -24,6 +27,9 @@ extern struct genapic apic_default;
 struct genapic *genapic = &apic_default;
 
 static struct genapic *apic_probe[] __initdata = {
+#ifdef CONFIG_NUMA
+	&apic_numaq,
+#endif
 	&apic_summit,
 	&apic_bigsmp,
 	&apic_es7000,

index d9afbae..a4ff536 100644
@@ -11,38 +11,18 @@
 #define XQUAD_PORTIO_BASE 0xfe400000
 #define XQUAD_PORTIO_QUAD 0x40000  /* 256k per quad. */
 
-int mp_bus_id_to_node[MAX_MP_BUSSES];
+extern int mp_bus_id_to_node[MAX_MP_BUSSES];
 #define BUS2QUAD(global) (mp_bus_id_to_node[global])
 
-int mp_bus_id_to_local[MAX_MP_BUSSES];
+extern int mp_bus_id_to_local[MAX_MP_BUSSES];
 #define BUS2LOCAL(global) (mp_bus_id_to_local[global])
 
-void mpc_oem_bus_info(struct mpc_config_bus *m, char *name,
-	struct mpc_config_translation *translation)
-{
-	int quad = translation->trans_quad;
-	int local = translation->trans_local;
-
-	mp_bus_id_to_node[m->mpc_busid] = quad;
-	mp_bus_id_to_local[m->mpc_busid] = local;
-	printk(KERN_INFO "Bus #%d is %s (node %d)\n",
-	       m->mpc_busid, name, quad);
-}
-
-int quad_local_to_mp_bus_id [NR_CPUS/4][4];
+extern int quad_local_to_mp_bus_id [NR_CPUS/4][4];
 #define QUADLOCAL2BUS(quad,local) (quad_local_to_mp_bus_id[quad][local])
-void mpc_oem_pci_bus(struct mpc_config_bus *m,
-	struct mpc_config_translation *translation)
-{
-	int quad = translation->trans_quad;
-	int local = translation->trans_local;
-
-	quad_local_to_mp_bus_id[quad][local] = m->mpc_busid;
-}
 
 /* Where the IO area was mapped on multiquad, always 0 otherwise */
 void *xquad_portio;
-#ifdef CONFIG_X86_NUMAQ
+#if defined(CONFIG_X86_NUMAQ) || defined(CONFIG_X86_GENERICARCH)
 EXPORT_SYMBOL(xquad_portio);
 #endif
 

index 6eff343..4a7c1af 100644
@@ -27,6 +27,7 @@
 #define enable_apic_mode (genapic->enable_apic_mode)
 #define phys_pkg_id (genapic->phys_pkg_id)
 
+extern int found_numaq;
 extern void generic_bigsmp_probe(void);
 
 #endif /* __ASM_MACH_APIC_H */

index 0d0b5ba..1f2d4cf 100644
@@ -1,7 +1,6 @@
 #ifndef _MACH_MPPARSE_H
 #define _MACH_MPPARSE_H 1
 
-int mps_oem_check(struct mp_config_table *mpc, char *oem, char *productid); 
 int acpi_madt_oem_check(char *oem_id, char *oem_table_id); 
 
 #endif

index 75a56e5..d802465 100644
@@ -20,8 +20,14 @@ static inline cpumask_t target_cpus(void)
 #define INT_DELIVERY_MODE dest_LowestPrio
 #define INT_DEST_MODE 0     /* physical delivery on LOCAL quad */
  
-#define check_apicid_used(bitmap, apicid) physid_isset(apicid, bitmap)
-#define check_apicid_present(bit) physid_isset(bit, phys_cpu_present_map)
+static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
+{
+	return physid_isset(apicid, bitmap);
+}
+static inline unsigned long check_apicid_present(int bit)
+{
+	return physid_isset(bit, phys_cpu_present_map);
+}
 #define apicid_cluster(apicid) (apicid & 0xF0)
 
 static inline int apic_id_registered(void)

@@ -77,11 +83,6 @@ static inline int cpu_present_to_apicid(int mps_cpu)
 		return BAD_APICID;
 }
 
-static inline int generate_logical_apicid(int quad, int phys_apicid)
-{
-	return (quad << 4) + (phys_apicid ? phys_apicid << 1 : 1);
-}
-
 static inline int apicid_to_node(int logical_apicid) 
 {
 	return logical_apicid >> 4;

@@ -95,30 +96,6 @@ static inline physid_mask_t apicid_to_cpu_present(int logical_apicid)
 	return physid_mask_of_physid(cpu + 4*node);
 }
 
-struct mpc_config_translation {
-	unsigned char mpc_type;
-	unsigned char trans_len;
-	unsigned char trans_type;
-	unsigned char trans_quad;
-	unsigned char trans_global;
-	unsigned char trans_local;
-	unsigned short trans_reserved;
-};
-
-static inline int mpc_apic_id(struct mpc_config_processor *m, 
-			struct mpc_config_translation *translation_record)
-{
-	int quad = translation_record->trans_quad;
-	int logical_apicid = generate_logical_apicid(quad, m->mpc_apicid);
-
-	printk("Processor #%d %u:%u APIC version %d (quad %d, apic %d)\n",
-	       m->mpc_apicid,
-	       (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8,
-	       (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4,
-	       m->mpc_apicver, quad, logical_apicid);
-	return logical_apicid;
-}
-
 extern void *xquad_portio;
 
 static inline void setup_portio_remap(void)

index 459b124..e0bab65 100644
@@ -1,11 +1,6 @@
 #ifndef __ASM_MACH_MPPARSE_H
 #define __ASM_MACH_MPPARSE_H
 
-extern void mpc_oem_bus_info(struct mpc_config_bus *m, char *name,
-			     struct mpc_config_translation *translation);
-extern void mpc_oem_pci_bus(struct mpc_config_bus *m,
-	struct mpc_config_translation *translation);
-
 /* Hook from generic ACPI tables.c */
 static inline void acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {

index ab00128..9c56ba9 100644
@@ -12,9 +12,10 @@
 extern struct pglist_data *node_data[];
 #define NODE_DATA(nid)	(node_data[nid])
 
-#ifdef CONFIG_X86_NUMAQ
+#if defined(CONFIG_X86_NUMAQ) || defined(CONFIG_X86_GENERICARCH)
 	#include <asm/numaq.h>
-#elif defined(CONFIG_ACPI_SRAT)/* summit or generic arch */
+#endif
+#if defined(CONFIG_ACPI_SRAT)/* summit or generic arch */
 	#include <asm/srat.h>
 #endif
 

@@ -26,10 +27,12 @@ extern int get_memcfg_numa_flat(void);
  */
 static inline void get_memcfg_numa(void)
 {
-#ifdef CONFIG_X86_NUMAQ
+
+#if defined(CONFIG_X86_NUMAQ) || defined(CONFIG_X86_GENERICARCH)
 	if (get_memcfg_numaq())
 		return;
-#elif defined(CONFIG_ACPI_SRAT)
+#endif
+#if defined(CONFIG_ACPI_SRAT)
 	if (get_memcfg_from_srat())
 		return;
 #endif

@@ -42,7 +45,6 @@ extern int early_pfn_to_nid(unsigned long pfn);
 #else /* !CONFIG_NUMA */
 
 #define get_memcfg_numa get_memcfg_numa_flat
-#define get_zholes_size(n) (0)
 
 #endif /* CONFIG_NUMA */
 

@@ -83,9 +85,6 @@ static inline int pfn_to_nid(unsigned long pfn)
 	__pgdat->node_start_pfn + __pgdat->node_spanned_pages;		\
 })
 
-#ifdef CONFIG_X86_NUMAQ            /* we have contiguous memory on NUMA-Q */
-#define pfn_valid(pfn)          ((pfn) < num_physpages)
-#else
 static inline int pfn_valid(int pfn)
 {
 	int nid = pfn_to_nid(pfn);

@@ -94,7 +93,6 @@ static inline int pfn_valid(int pfn)
 		return (pfn < node_end_pfn(nid));
 	return 0;
 }
-#endif /* CONFIG_X86_NUMAQ */
 
 #endif /* CONFIG_DISCONTIGMEM */
 

index 739d164..76e0b13 100644
@@ -26,7 +26,7 @@
 #ifndef NUMAQ_H
 #define NUMAQ_H
 
-#ifdef CONFIG_X86_NUMAQ
+#if defined(CONFIG_X86_NUMAQ) || defined(CONFIG_X86_GENERICARCH)
 
 extern int found_numaq;
 extern int get_memcfg_numaq(void);

@@ -157,10 +157,6 @@ struct sys_cfg_data {
 	struct		eachquadmem eq[MAX_NUMNODES];	/* indexed by quad id */
 };
 
-static inline unsigned long *get_zholes_size(int nid)
-{
-	return NULL;
-}
-#endif /* CONFIG_X86_NUMAQ */
+#endif /* CONFIG_X86_NUMAQ || CONFIG_X86_GENERICARCH */
 #endif /* NUMAQ_H */
 

index f4bba13..ad1f502 100644
@@ -32,6 +32,5 @@
 #endif
 
 extern int get_memcfg_from_srat(void);
-extern unsigned long *get_zholes_size(int);
 
 #endif /* _ASM_SRAT_H_ */

@@ -0,0 +1,35 @@
+/*
+ * APIC driver for the IBM NUMAQ chipset.
+ */
+#define APIC_DEFINITION 1
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <asm/smp.h>
+#include <asm/mpspec.h>
+#include <asm/genapic.h>
+#include <asm/fixmap.h>
+#include <asm/apicdef.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/smp.h>
+#include <linux/init.h>
+#include <asm/mach-numaq/mach_apic.h>
+#include <asm/mach-numaq/mach_apicdef.h>
+#include <asm/mach-numaq/mach_ipi.h>
+#include <asm/mach-numaq/mach_mpparse.h>
+#include <asm/mach-numaq/mach_wakecpu.h>
+#include <asm/numaq.h>
+
+static int mps_oem_check(struct mp_config_table *mpc, char *oem,
+		char *productid)
+{
+	return 0;
+}
+
+static int probe_numaq(void)
+{
+	/* already know from get_memcfg_numaq() */
+	return found_numaq;
+}
+
+struct genapic apic_numaq = APIC_INIT("NUMAQ", probe_numaq);

Index: linux-2.6/arch/x86/kernel/io_apic_32.c
===================================================================
@@ -1715,7 +1715,6 @@ void disable_IO_APIC(void)
  * by Matt Domsch <[email protected]>  Tue Dec 21 12:25:05 CST 1999
  */
 
-#ifndef CONFIG_X86_NUMAQ
 static void __init setup_ioapic_ids_from_mpc(void)
 {
 	union IO_APIC_reg_00 reg_00;

@@ -1725,6 +1724,11 @@ static void __init setup_ioapic_ids_from
 	unsigned char old_id;
 	unsigned long flags;
 
+#ifdef CONFIG_X86_NUMAQ
+	if (found_numaq)
+		return;
+#endif
+
 	/*
 	 * Don't check I/O APIC IDs for xAPIC systems.  They have
 	 * no meaning without the serial APIC bus.

@@ -1821,9 +1825,6 @@ static void __init setup_ioapic_ids_from
 			apic_printk(APIC_VERBOSE, " ok.\n");
 	}
 }
-#else
-static void __init setup_ioapic_ids_from_mpc(void) { }
-#endif
 
 int no_timer_check __initdata;
 

112 lines not on this page · raw message

Index: linux-2.6/arch/x86/kernel/numaq_32.c
===================================================================
@@ -36,8 +36,6 @@
 
 #define	MB_TO_PAGES(addr) ((addr) << (20 - PAGE_SHIFT))
 
-int found_numaq;
-
 /*
  * Function: smp_dump_qct()
  *

@@ -105,13 +103,3 @@ static int __init numaq_tsc_disable(void
 }
 arch_initcall(numaq_tsc_disable);
 
-#ifdef CONFIG_ACPI
-/*
- * Dummy implementation:
- */
-struct pci_bus * __devinit
-pci_acpi_scan_root(struct acpi_device *device, int domain, int busnum)
-{
-	return NULL;
-}
-#endif

Index: linux-2.6/arch/x86/mach-generic/probe.c
===================================================================
@@ -16,6 +16,7 @@
 #include <asm/apicdef.h>
 #include <asm/genapic.h>
 
+extern struct genapic apic_numaq;
 extern struct genapic apic_summit;
 extern struct genapic apic_bigsmp;
 extern struct genapic apic_es7000;

@@ -24,6 +25,9 @@ extern struct genapic apic_default;
 struct genapic *genapic = &apic_default;
 
 static struct genapic *apic_probe[] __initdata = {
+#ifdef CONFIG_X86_NUMAQ
+	&apic_numaq,
+#endif
 	&apic_summit,
 	&apic_bigsmp,
 	&apic_es7000,

@@ -88,7 +92,8 @@ void __init generic_apic_probe(void)
 
 /* These functions can switch the APIC even after the initial ->probe() */
 
-int __init mps_oem_check(struct mp_config_table *mpc, char *oem, char *productid)
+int __init mps_oem_check(struct mp_config_table *mpc, char *oem,
+				 char *productid)
 {
 	int i;
 	for (i = 0; apic_probe[i]; ++i) {

Index: linux-2.6/arch/x86/pci/numa.c
===================================================================
@@ -6,45 +6,21 @@
 #include <linux/init.h>
 #include <linux/nodemask.h>
 #include <mach_apic.h>
+#include <asm/mpspec.h>
 #include "pci.h"
 
 #define XQUAD_PORTIO_BASE 0xfe400000
 #define XQUAD_PORTIO_QUAD 0x40000  /* 256k per quad. */
 
-int mp_bus_id_to_node[MAX_MP_BUSSES];
 #define BUS2QUAD(global) (mp_bus_id_to_node[global])
 
-int mp_bus_id_to_local[MAX_MP_BUSSES];
 #define BUS2LOCAL(global) (mp_bus_id_to_local[global])
 
-void mpc_oem_bus_info(struct mpc_config_bus *m, char *name,
-	struct mpc_config_translation *translation)
-{
-	int quad = translation->trans_quad;
-	int local = translation->trans_local;
-
-	mp_bus_id_to_node[m->mpc_busid] = quad;
-	mp_bus_id_to_local[m->mpc_busid] = local;
-	printk(KERN_INFO "Bus #%d is %s (node %d)\n",
-	       m->mpc_busid, name, quad);
-}
-
-int quad_local_to_mp_bus_id [NR_CPUS/4][4];
 #define QUADLOCAL2BUS(quad,local) (quad_local_to_mp_bus_id[quad][local])
-void mpc_oem_pci_bus(struct mpc_config_bus *m,
-	struct mpc_config_translation *translation)
-{
-	int quad = translation->trans_quad;
-	int local = translation->trans_local;
-
-	quad_local_to_mp_bus_id[quad][local] = m->mpc_busid;
-}
 
 /* Where the IO area was mapped on multiquad, always 0 otherwise */
 void *xquad_portio;
-#ifdef CONFIG_X86_NUMAQ
 EXPORT_SYMBOL(xquad_portio);
-#endif
 
 #define XQUAD_PORT_ADDR(port, quad) (xquad_portio + (XQUAD_PORTIO_QUAD*quad) + port)
 

Index: linux-2.6/include/asm-x86/mach-generic/mach_mpparse.h
===================================================================
@@ -1,7 +1,10 @@
 #ifndef _MACH_MPPARSE_H
 #define _MACH_MPPARSE_H 1
 
-int mps_oem_check(struct mp_config_table *mpc, char *oem, char *productid); 
-int acpi_madt_oem_check(char *oem_id, char *oem_table_id); 
+
+extern int mps_oem_check(struct mp_config_table *mpc, char *oem,
+			 char *productid);
+
+extern int acpi_madt_oem_check(char *oem_id, char *oem_table_id);
 
 #endif

Index: linux-2.6/include/asm-x86/mach-numaq/mach_apic.h
===================================================================
@@ -20,8 +20,14 @@ static inline cpumask_t target_cpus(void
 #define INT_DELIVERY_MODE dest_LowestPrio
 #define INT_DEST_MODE 0     /* physical delivery on LOCAL quad */
  
-#define check_apicid_used(bitmap, apicid) physid_isset(apicid, bitmap)
-#define check_apicid_present(bit) physid_isset(bit, phys_cpu_present_map)
+static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
+{
+	return physid_isset(apicid, bitmap);
+}
+static inline unsigned long check_apicid_present(int bit)
+{
+	return physid_isset(bit, phys_cpu_present_map);
+}
 #define apicid_cluster(apicid) (apicid & 0xF0)
 
 static inline int apic_id_registered(void)

@@ -77,11 +83,6 @@ static inline int cpu_present_to_apicid(
 		return BAD_APICID;
 }
 
-static inline int generate_logical_apicid(int quad, int phys_apicid)
-{
-	return (quad << 4) + (phys_apicid ? phys_apicid << 1 : 1);
-}
-
 static inline int apicid_to_node(int logical_apicid) 
 {
 	return logical_apicid >> 4;

@@ -95,30 +96,6 @@ static inline physid_mask_t apicid_to_cp
 	return physid_mask_of_physid(cpu + 4*node);
 }
 
-struct mpc_config_translation {
-	unsigned char mpc_type;
-	unsigned char trans_len;
-	unsigned char trans_type;
-	unsigned char trans_quad;
-	unsigned char trans_global;
-	unsigned char trans_local;
-	unsigned short trans_reserved;
-};
-
-static inline int mpc_apic_id(struct mpc_config_processor *m, 
-			struct mpc_config_translation *translation_record)
-{
-	int quad = translation_record->trans_quad;
-	int logical_apicid = generate_logical_apicid(quad, m->mpc_apicid);
-
-	printk("Processor #%d %u:%u APIC version %d (quad %d, apic %d)\n",
-	       m->mpc_apicid,
-	       (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8,
-	       (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4,
-	       m->mpc_apicver, quad, logical_apicid);
-	return logical_apicid;
-}
-
 extern void *xquad_portio;
 
 static inline void setup_portio_remap(void)

Index: linux-2.6/include/asm-x86/mach-numaq/mach_mpparse.h
===================================================================
@@ -1,14 +1,7 @@
 #ifndef __ASM_MACH_MPPARSE_H
 #define __ASM_MACH_MPPARSE_H
 
-extern void mpc_oem_bus_info(struct mpc_config_bus *m, char *name,
-			     struct mpc_config_translation *translation);
-extern void mpc_oem_pci_bus(struct mpc_config_bus *m,
-	struct mpc_config_translation *translation);
-
-/* Hook from generic ACPI tables.c */
-static inline void acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
-}
+extern void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem,
+				char *productid);
 
 #endif /* __ASM_MACH_MPPARSE_H */

Index: linux-2.6/include/asm-x86/mmzone_32.h
===================================================================
@@ -12,11 +12,9 @@
 extern struct pglist_data *node_data[];
 #define NODE_DATA(nid)	(node_data[nid])
 
-#ifdef CONFIG_X86_NUMAQ
-	#include <asm/numaq.h>
-#elif defined(CONFIG_ACPI_SRAT)/* summit or generic arch */
-	#include <asm/srat.h>
-#endif
+#include <asm/numaq.h>
+/* summit or generic arch */
+#include <asm/srat.h>
 
 extern int get_memcfg_numa_flat(void);
 /*

@@ -26,14 +24,11 @@ extern int get_memcfg_numa_flat(void);
  */
 static inline void get_memcfg_numa(void)
 {
-#ifdef CONFIG_X86_NUMAQ
+
 	if (get_memcfg_numaq())
 		return;
-#elif defined(CONFIG_ACPI_SRAT)
 	if (get_memcfg_from_srat())
 		return;
-#endif
-
 	get_memcfg_numa_flat();
 }
 

@@ -42,7 +37,6 @@ extern int early_pfn_to_nid(unsigned lon
 #else /* !CONFIG_NUMA */
 
 #define get_memcfg_numa get_memcfg_numa_flat
-#define get_zholes_size(n) (0)
 
 #endif /* CONFIG_NUMA */
 

@@ -83,9 +77,6 @@ static inline int pfn_to_nid(unsigned lo
 	__pgdat->node_start_pfn + __pgdat->node_spanned_pages;		\
 })
 
-#ifdef CONFIG_X86_NUMAQ            /* we have contiguous memory on NUMA-Q */
-#define pfn_valid(pfn)          ((pfn) < num_physpages)
-#else
 static inline int pfn_valid(int pfn)
 {
 	int nid = pfn_to_nid(pfn);

@@ -94,7 +85,6 @@ static inline int pfn_valid(int pfn)
 		return (pfn < node_end_pfn(nid));
 	return 0;
 }
-#endif /* CONFIG_X86_NUMAQ */
 
 #endif /* CONFIG_DISCONTIGMEM */
 

Index: linux-2.6/include/asm-x86/numaq.h
===================================================================
@@ -157,9 +157,10 @@ struct sys_cfg_data {
 	struct		eachquadmem eq[MAX_NUMNODES];	/* indexed by quad id */
 };
 
-static inline unsigned long *get_zholes_size(int nid)
+#else
+static inline int get_memcfg_numaq(void)
 {
-	return NULL;
+	return 0;
 }
 #endif /* CONFIG_X86_NUMAQ */
 #endif /* NUMAQ_H */

Index: linux-2.6/include/asm-x86/srat.h
===================================================================
@@ -27,11 +27,13 @@
 #ifndef _ASM_SRAT_H_
 #define _ASM_SRAT_H_
 
-#ifndef CONFIG_ACPI_SRAT
-#error CONFIG_ACPI_SRAT not defined, and srat.h header has been included
-#endif
-
+#ifdef CONFIG_ACPI_SRAT
 extern int get_memcfg_from_srat(void);
-extern unsigned long *get_zholes_size(int);
+#else
+static inline int get_memcfg_from_srat(void)
+{
+	return 0;
+}
+#endif
 
 #endif /* _ASM_SRAT_H_ */

41 lines not on this page · raw message

Index: linux-2.6/arch/x86/kernel/apic_32.c
===================================================================
@@ -1528,7 +1528,7 @@ void __cpuinit generic_processor_info(in
 	 * if (CPU_HOTPLUG_ENABLED || num_processors > 8)
 	 *       - Ashok Raj <[email protected]>
 	 */
-	if (num_processors > 8) {
+	if (apicid > 8) {
 		switch (boot_cpu_data.x86_vendor) {
 		case X86_VENDOR_INTEL:
 			if (!APIC_XAPIC(version)) {

Index: linux-2.6/arch/x86/mach-generic/bigsmp.c
===================================================================
@@ -48,7 +48,7 @@ static const struct dmi_system_id bigsmp
 static int probe_bigsmp(void)
 {
 	if (def_to_bigsmp)
-	dmi_bigsmp = 1;
+		dmi_bigsmp = 1;
 	else
 		dmi_check_system(bigsmp_dmi_table);
 	return dmi_bigsmp;

Index: linux-2.6/include/asm-x86/mpspec.h
===================================================================
@@ -13,6 +13,12 @@ extern int apic_version[MAX_APICS];
 extern u8 apicid_2_node[];
 extern int pic_mode;
 
+#ifdef CONFIG_X86_NUMAQ
+extern int mp_bus_id_to_node[MAX_MP_BUSSES];
+extern int mp_bus_id_to_local[MAX_MP_BUSSES];
+extern int quad_local_to_mp_bus_id [NR_CPUS/4][4];
+#endif
+
 #define MAX_APICID 256
 
 #else

Index: linux-2.6/arch/x86/kernel/summit_32.c
===================================================================
@@ -36,7 +36,9 @@ static struct rio_table_hdr *rio_table_h
 static struct scal_detail   *scal_devs[MAX_NUMNODES] __initdata;
 static struct rio_detail    *rio_devs[MAX_NUMNODES*4] __initdata;
 
+#ifndef CONFIG_X86_NUMAQ
 static int mp_bus_id_to_node[MAX_MP_BUSSES] __initdata;
+#endif
 
 static int __init setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus)
 {

Index: linux-2.6/arch/x86/kernel/io_apic_32.c
===================================================================
@@ -1715,7 +1715,6 @@ void disable_IO_APIC(void)
  * by Matt Domsch <[email protected]>  Tue Dec 21 12:25:05 CST 1999
  */
 
-#ifndef CONFIG_X86_NUMAQ
 static void __init setup_ioapic_ids_from_mpc(void)
 {
 	union IO_APIC_reg_00 reg_00;

@@ -1725,6 +1724,11 @@ static void __init setup_ioapic_ids_from
 	unsigned char old_id;
 	unsigned long flags;
 
+#ifdef CONFIG_X86_NUMAQ
+	if (found_numaq)
+		return;
+#endif
+
 	/*
 	 * Don't check I/O APIC IDs for xAPIC systems.  They have
 	 * no meaning without the serial APIC bus.

@@ -1821,9 +1825,6 @@ static void __init setup_ioapic_ids_from
 			apic_printk(APIC_VERBOSE, " ok.\n");
 	}
 }
-#else
-static void __init setup_ioapic_ids_from_mpc(void) { }
-#endif
 
 int no_timer_check __initdata;
 

112 lines not on this page · raw message

Index: linux-2.6/arch/x86/kernel/numaq_32.c
===================================================================
@@ -36,8 +36,6 @@
 
 #define	MB_TO_PAGES(addr) ((addr) << (20 - PAGE_SHIFT))
 
-int found_numaq;
-
 /*
  * Function: smp_dump_qct()
  *

@@ -105,13 +103,3 @@ static int __init numaq_tsc_disable(void
 }
 arch_initcall(numaq_tsc_disable);
 
-#ifdef CONFIG_ACPI
-/*
- * Dummy implementation:
- */
-struct pci_bus * __devinit
-pci_acpi_scan_root(struct acpi_device *device, int domain, int busnum)
-{
-	return NULL;
-}
-#endif

Index: linux-2.6/arch/x86/mach-generic/probe.c
===================================================================
@@ -16,6 +16,7 @@
 #include <asm/apicdef.h>
 #include <asm/genapic.h>
 
+extern struct genapic apic_numaq;
 extern struct genapic apic_summit;
 extern struct genapic apic_bigsmp;
 extern struct genapic apic_es7000;

@@ -24,6 +25,9 @@ extern struct genapic apic_default;
 struct genapic *genapic = &apic_default;
 
 static struct genapic *apic_probe[] __initdata = {
+#ifdef CONFIG_X86_NUMAQ
+	&apic_numaq,
+#endif
 	&apic_summit,
 	&apic_bigsmp,
 	&apic_es7000,

@@ -88,7 +92,8 @@ void __init generic_apic_probe(void)
 
 /* These functions can switch the APIC even after the initial ->probe() */
 
-int __init mps_oem_check(struct mp_config_table *mpc, char *oem, char *productid)
+int __init mps_oem_check(struct mp_config_table *mpc, char *oem,
+				 char *productid)
 {
 	int i;
 	for (i = 0; apic_probe[i]; ++i) {

Index: linux-2.6/arch/x86/pci/numa.c
===================================================================
@@ -6,45 +6,21 @@
 #include <linux/init.h>
 #include <linux/nodemask.h>
 #include <mach_apic.h>
+#include <asm/mpspec.h>
 #include "pci.h"
 
 #define XQUAD_PORTIO_BASE 0xfe400000
 #define XQUAD_PORTIO_QUAD 0x40000  /* 256k per quad. */
 
-int mp_bus_id_to_node[MAX_MP_BUSSES];
 #define BUS2QUAD(global) (mp_bus_id_to_node[global])
 
-int mp_bus_id_to_local[MAX_MP_BUSSES];
 #define BUS2LOCAL(global) (mp_bus_id_to_local[global])
 
-void mpc_oem_bus_info(struct mpc_config_bus *m, char *name,
-	struct mpc_config_translation *translation)
-{
-	int quad = translation->trans_quad;
-	int local = translation->trans_local;
-
-	mp_bus_id_to_node[m->mpc_busid] = quad;
-	mp_bus_id_to_local[m->mpc_busid] = local;
-	printk(KERN_INFO "Bus #%d is %s (node %d)\n",
-	       m->mpc_busid, name, quad);
-}
-
-int quad_local_to_mp_bus_id [NR_CPUS/4][4];
 #define QUADLOCAL2BUS(quad,local) (quad_local_to_mp_bus_id[quad][local])
-void mpc_oem_pci_bus(struct mpc_config_bus *m,
-	struct mpc_config_translation *translation)
-{
-	int quad = translation->trans_quad;
-	int local = translation->trans_local;
-
-	quad_local_to_mp_bus_id[quad][local] = m->mpc_busid;
-}
 
 /* Where the IO area was mapped on multiquad, always 0 otherwise */
 void *xquad_portio;
-#ifdef CONFIG_X86_NUMAQ
 EXPORT_SYMBOL(xquad_portio);
-#endif
 
 #define XQUAD_PORT_ADDR(port, quad) (xquad_portio + (XQUAD_PORTIO_QUAD*quad) + port)
 

@@ -179,6 +155,9 @@ static int __init pci_numa_init(void)
 {
 	int quad;
 
+	if (!found_numaq)
+		return 0;
+
 	raw_pci_ops = &pci_direct_conf1_mq;
 
 	if (pcibios_scanned++)

Index: linux-2.6/include/asm-x86/mach-generic/mach_mpparse.h
===================================================================
@@ -1,7 +1,10 @@
 #ifndef _MACH_MPPARSE_H
 #define _MACH_MPPARSE_H 1
 
-int mps_oem_check(struct mp_config_table *mpc, char *oem, char *productid); 
-int acpi_madt_oem_check(char *oem_id, char *oem_table_id); 
+
+extern int mps_oem_check(struct mp_config_table *mpc, char *oem,
+			 char *productid);
+
+extern int acpi_madt_oem_check(char *oem_id, char *oem_table_id);
 
 #endif

Index: linux-2.6/include/asm-x86/mach-numaq/mach_apic.h
===================================================================
@@ -20,8 +20,14 @@ static inline cpumask_t target_cpus(void
 #define INT_DELIVERY_MODE dest_LowestPrio
 #define INT_DEST_MODE 0     /* physical delivery on LOCAL quad */
  
-#define check_apicid_used(bitmap, apicid) physid_isset(apicid, bitmap)
-#define check_apicid_present(bit) physid_isset(bit, phys_cpu_present_map)
+static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
+{
+	return physid_isset(apicid, bitmap);
+}
+static inline unsigned long check_apicid_present(int bit)
+{
+	return physid_isset(bit, phys_cpu_present_map);
+}
 #define apicid_cluster(apicid) (apicid & 0xF0)
 
 static inline int apic_id_registered(void)

@@ -77,11 +83,6 @@ static inline int cpu_present_to_apicid(
 		return BAD_APICID;
 }
 
-static inline int generate_logical_apicid(int quad, int phys_apicid)
-{
-	return (quad << 4) + (phys_apicid ? phys_apicid << 1 : 1);
-}
-
 static inline int apicid_to_node(int logical_apicid) 
 {
 	return logical_apicid >> 4;

@@ -95,30 +96,6 @@ static inline physid_mask_t apicid_to_cp
 	return physid_mask_of_physid(cpu + 4*node);
 }
 
-struct mpc_config_translation {
-	unsigned char mpc_type;
-	unsigned char trans_len;
-	unsigned char trans_type;
-	unsigned char trans_quad;
-	unsigned char trans_global;
-	unsigned char trans_local;
-	unsigned short trans_reserved;
-};
-
-static inline int mpc_apic_id(struct mpc_config_processor *m, 
-			struct mpc_config_translation *translation_record)
-{
-	int quad = translation_record->trans_quad;
-	int logical_apicid = generate_logical_apicid(quad, m->mpc_apicid);
-
-	printk("Processor #%d %u:%u APIC version %d (quad %d, apic %d)\n",
-	       m->mpc_apicid,
-	       (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8,
-	       (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4,
-	       m->mpc_apicver, quad, logical_apicid);
-	return logical_apicid;
-}
-
 extern void *xquad_portio;
 
 static inline void setup_portio_remap(void)

Index: linux-2.6/include/asm-x86/mach-numaq/mach_mpparse.h
===================================================================
@@ -1,14 +1,7 @@
 #ifndef __ASM_MACH_MPPARSE_H
 #define __ASM_MACH_MPPARSE_H
 
-extern void mpc_oem_bus_info(struct mpc_config_bus *m, char *name,
-			     struct mpc_config_translation *translation);
-extern void mpc_oem_pci_bus(struct mpc_config_bus *m,
-	struct mpc_config_translation *translation);
-
-/* Hook from generic ACPI tables.c */
-static inline void acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
-}
+extern void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem,
+				char *productid);
 
 #endif /* __ASM_MACH_MPPARSE_H */

Index: linux-2.6/include/asm-x86/mmzone_32.h
===================================================================
@@ -12,11 +12,9 @@
 extern struct pglist_data *node_data[];
 #define NODE_DATA(nid)	(node_data[nid])
 
-#ifdef CONFIG_X86_NUMAQ
-	#include <asm/numaq.h>
-#elif defined(CONFIG_ACPI_SRAT)/* summit or generic arch */
-	#include <asm/srat.h>
-#endif
+#include <asm/numaq.h>
+/* summit or generic arch */
+#include <asm/srat.h>
 
 extern int get_memcfg_numa_flat(void);
 /*

@@ -26,14 +24,11 @@ extern int get_memcfg_numa_flat(void);
  */
 static inline void get_memcfg_numa(void)
 {
-#ifdef CONFIG_X86_NUMAQ
+
 	if (get_memcfg_numaq())
 		return;
-#elif defined(CONFIG_ACPI_SRAT)
 	if (get_memcfg_from_srat())
 		return;
-#endif
-
 	get_memcfg_numa_flat();
 }
 

@@ -42,7 +37,6 @@ extern int early_pfn_to_nid(unsigned lon
 #else /* !CONFIG_NUMA */
 
 #define get_memcfg_numa get_memcfg_numa_flat
-#define get_zholes_size(n) (0)
 
 #endif /* CONFIG_NUMA */
 

@@ -83,9 +77,6 @@ static inline int pfn_to_nid(unsigned lo
 	__pgdat->node_start_pfn + __pgdat->node_spanned_pages;		\
 })
 
-#ifdef CONFIG_X86_NUMAQ            /* we have contiguous memory on NUMA-Q */
-#define pfn_valid(pfn)          ((pfn) < num_physpages)
-#else
 static inline int pfn_valid(int pfn)
 {
 	int nid = pfn_to_nid(pfn);

@@ -94,7 +85,6 @@ static inline int pfn_valid(int pfn)
 		return (pfn < node_end_pfn(nid));
 	return 0;
 }
-#endif /* CONFIG_X86_NUMAQ */
 
 #endif /* CONFIG_DISCONTIGMEM */
 

Index: linux-2.6/include/asm-x86/numaq.h
===================================================================
@@ -157,9 +157,10 @@ struct sys_cfg_data {
 	struct		eachquadmem eq[MAX_NUMNODES];	/* indexed by quad id */
 };
 
-static inline unsigned long *get_zholes_size(int nid)
+#else
+static inline int get_memcfg_numaq(void)
 {
-	return NULL;
+	return 0;
 }
 #endif /* CONFIG_X86_NUMAQ */
 #endif /* NUMAQ_H */

Index: linux-2.6/include/asm-x86/srat.h
===================================================================
@@ -27,11 +27,13 @@
 #ifndef _ASM_SRAT_H_
 #define _ASM_SRAT_H_
 
-#ifndef CONFIG_ACPI_SRAT
-#error CONFIG_ACPI_SRAT not defined, and srat.h header has been included
-#endif
-
+#ifdef CONFIG_ACPI_SRAT
 extern int get_memcfg_from_srat(void);
-extern unsigned long *get_zholes_size(int);
+#else
+static inline int get_memcfg_from_srat(void)
+{
+	return 0;
+}
+#endif
 
 #endif /* _ASM_SRAT_H_ */

41 lines not on this page · raw message

Index: linux-2.6/arch/x86/kernel/apic_32.c
===================================================================
@@ -1528,7 +1528,7 @@ void __cpuinit generic_processor_info(in
 	 * if (CPU_HOTPLUG_ENABLED || num_processors > 8)
 	 *       - Ashok Raj <[email protected]>
 	 */
-	if (num_processors > 8) {
+	if (apicid > 8) {
 		switch (boot_cpu_data.x86_vendor) {
 		case X86_VENDOR_INTEL:
 			if (!APIC_XAPIC(version)) {

Index: linux-2.6/arch/x86/mach-generic/bigsmp.c
===================================================================
@@ -48,7 +48,7 @@ static const struct dmi_system_id bigsmp
 static int probe_bigsmp(void)
 {
 	if (def_to_bigsmp)
-	dmi_bigsmp = 1;
+		dmi_bigsmp = 1;
 	else
 		dmi_check_system(bigsmp_dmi_table);
 	return dmi_bigsmp;

Index: linux-2.6/include/asm-x86/mpspec.h
===================================================================
@@ -13,6 +13,12 @@ extern int apic_version[MAX_APICS];
 extern u8 apicid_2_node[];
 extern int pic_mode;
 
+#ifdef CONFIG_X86_NUMAQ
+extern int mp_bus_id_to_node[MAX_MP_BUSSES];
+extern int mp_bus_id_to_local[MAX_MP_BUSSES];
+extern int quad_local_to_mp_bus_id [NR_CPUS/4][4];
+#endif
+
 #define MAX_APICID 256
 
 #else

Index: linux-2.6/arch/x86/kernel/summit_32.c
===================================================================
@@ -36,7 +36,9 @@ static struct rio_table_hdr *rio_table_h
 static struct scal_detail   *scal_devs[MAX_NUMNODES] __initdata;
 static struct rio_detail    *rio_devs[MAX_NUMNODES*4] __initdata;
 
+#ifndef CONFIG_X86_NUMAQ
 static int mp_bus_id_to_node[MAX_MP_BUSSES] __initdata;
+#endif
 
 static int __init setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus)
 {

Index: linux-2.6/arch/x86/boot/compressed/misc.c
===================================================================
@@ -217,10 +217,6 @@ static char *vidmem;
 static int vidport;
 static int lines, cols;
 
-#ifdef CONFIG_X86_NUMAQ
-void *xquad_portio;
-#endif
-
 #include "../../../../lib/inflate.c"
 
 static void *malloc(int size)

Index: linux-2.6/arch/x86/kernel/io_apic_32.c
===================================================================
@@ -1715,7 +1715,6 @@ void disable_IO_APIC(void)
  * by Matt Domsch <[email protected]>  Tue Dec 21 12:25:05 CST 1999
  */
 
-#ifndef CONFIG_X86_NUMAQ
 static void __init setup_ioapic_ids_from_mpc(void)
 {
 	union IO_APIC_reg_00 reg_00;

@@ -1725,6 +1724,11 @@ static void __init setup_ioapic_ids_from
 	unsigned char old_id;
 	unsigned long flags;
 
+#ifdef CONFIG_X86_NUMAQ
+	if (found_numaq)
+		return;
+#endif
+
 	/*
 	 * Don't check I/O APIC IDs for xAPIC systems.  They have
 	 * no meaning without the serial APIC bus.

@@ -1821,9 +1825,6 @@ static void __init setup_ioapic_ids_from
 			apic_printk(APIC_VERBOSE, " ok.\n");
 	}
 }
-#else
-static void __init setup_ioapic_ids_from_mpc(void) { }
-#endif
 
 int no_timer_check __initdata;
 

112 lines not on this page · raw message

Index: linux-2.6/arch/x86/kernel/numaq_32.c
===================================================================
@@ -36,8 +36,6 @@
 
 #define	MB_TO_PAGES(addr) ((addr) << (20 - PAGE_SHIFT))
 
-int found_numaq;
-
 /*
  * Function: smp_dump_qct()
  *

@@ -105,13 +103,3 @@ static int __init numaq_tsc_disable(void
 }
 arch_initcall(numaq_tsc_disable);
 
-#ifdef CONFIG_ACPI
-/*
- * Dummy implementation:
- */
-struct pci_bus * __devinit
-pci_acpi_scan_root(struct acpi_device *device, int domain, int busnum)
-{
-	return NULL;
-}
-#endif

Index: linux-2.6/arch/x86/mach-generic/probe.c
===================================================================
@@ -16,6 +16,7 @@
 #include <asm/apicdef.h>
 #include <asm/genapic.h>
 
+extern struct genapic apic_numaq;
 extern struct genapic apic_summit;
 extern struct genapic apic_bigsmp;
 extern struct genapic apic_es7000;

@@ -24,9 +25,18 @@ extern struct genapic apic_default;
 struct genapic *genapic = &apic_default;
 
 static struct genapic *apic_probe[] __initdata = {
+#ifdef CONFIG_X86_NUMAQ
+	&apic_numaq,
+#endif
+#ifdef CONFIG_X86_SUMMIT
 	&apic_summit,
+#endif
+#ifdef CONFIG_X86_BIGSMP
 	&apic_bigsmp,
+#endif
+#ifdef CONFIG_X86_ES7000
 	&apic_es7000,
+#endif
 	&apic_default,	/* must be last */
 	NULL,
 };

@@ -54,6 +64,7 @@ early_param("apic", parse_apic);
 
 void __init generic_bigsmp_probe(void)
 {
+#if CONFIG_X86_BIGSMP
 	/*
 	 * This routine is used to switch to bigsmp mode when
 	 * - There is no apic= option specified by the user

@@ -67,6 +78,7 @@ void __init generic_bigsmp_probe(void)
 			printk(KERN_INFO "Overriding APIC driver with %s\n",
 			       genapic->name);
 		}
+#endif
 }
 
 void __init generic_apic_probe(void)

@@ -88,7 +100,8 @@ void __init generic_apic_probe(void)
 
 /* These functions can switch the APIC even after the initial ->probe() */
 
-int __init mps_oem_check(struct mp_config_table *mpc, char *oem, char *productid)
+int __init mps_oem_check(struct mp_config_table *mpc, char *oem,
+				 char *productid)
 {
 	int i;
 	for (i = 0; apic_probe[i]; ++i) {

Index: linux-2.6/arch/x86/pci/numa.c
===================================================================
@@ -6,45 +6,21 @@
 #include <linux/init.h>
 #include <linux/nodemask.h>
 #include <mach_apic.h>
+#include <asm/mpspec.h>
 #include "pci.h"
 
 #define XQUAD_PORTIO_BASE 0xfe400000
 #define XQUAD_PORTIO_QUAD 0x40000  /* 256k per quad. */
 
-int mp_bus_id_to_node[MAX_MP_BUSSES];
 #define BUS2QUAD(global) (mp_bus_id_to_node[global])
 
-int mp_bus_id_to_local[MAX_MP_BUSSES];
 #define BUS2LOCAL(global) (mp_bus_id_to_local[global])
 
-void mpc_oem_bus_info(struct mpc_config_bus *m, char *name,
-	struct mpc_config_translation *translation)
-{
-	int quad = translation->trans_quad;
-	int local = translation->trans_local;
-
-	mp_bus_id_to_node[m->mpc_busid] = quad;
-	mp_bus_id_to_local[m->mpc_busid] = local;
-	printk(KERN_INFO "Bus #%d is %s (node %d)\n",
-	       m->mpc_busid, name, quad);
-}
-
-int quad_local_to_mp_bus_id [NR_CPUS/4][4];
 #define QUADLOCAL2BUS(quad,local) (quad_local_to_mp_bus_id[quad][local])
-void mpc_oem_pci_bus(struct mpc_config_bus *m,
-	struct mpc_config_translation *translation)
-{
-	int quad = translation->trans_quad;
-	int local = translation->trans_local;
-
-	quad_local_to_mp_bus_id[quad][local] = m->mpc_busid;
-}
 
 /* Where the IO area was mapped on multiquad, always 0 otherwise */
 void *xquad_portio;
-#ifdef CONFIG_X86_NUMAQ
 EXPORT_SYMBOL(xquad_portio);
-#endif
 
 #define XQUAD_PORT_ADDR(port, quad) (xquad_portio + (XQUAD_PORTIO_QUAD*quad) + port)
 

@@ -179,6 +155,9 @@ static int __init pci_numa_init(void)
 {
 	int quad;
 
+	if (!found_numaq)
+		return 0;
+
 	raw_pci_ops = &pci_direct_conf1_mq;
 
 	if (pcibios_scanned++)

Index: linux-2.6/include/asm-x86/mach-generic/mach_mpparse.h
===================================================================
@@ -1,7 +1,10 @@
 #ifndef _MACH_MPPARSE_H
 #define _MACH_MPPARSE_H 1
 
-int mps_oem_check(struct mp_config_table *mpc, char *oem, char *productid); 
-int acpi_madt_oem_check(char *oem_id, char *oem_table_id); 
+
+extern int mps_oem_check(struct mp_config_table *mpc, char *oem,
+			 char *productid);
+
+extern int acpi_madt_oem_check(char *oem_id, char *oem_table_id);
 
 #endif

Index: linux-2.6/include/asm-x86/mach-numaq/mach_apic.h
===================================================================
@@ -20,8 +20,14 @@ static inline cpumask_t target_cpus(void
 #define INT_DELIVERY_MODE dest_LowestPrio
 #define INT_DEST_MODE 0     /* physical delivery on LOCAL quad */
  
-#define check_apicid_used(bitmap, apicid) physid_isset(apicid, bitmap)
-#define check_apicid_present(bit) physid_isset(bit, phys_cpu_present_map)
+static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
+{
+	return physid_isset(apicid, bitmap);
+}
+static inline unsigned long check_apicid_present(int bit)
+{
+	return physid_isset(bit, phys_cpu_present_map);
+}
 #define apicid_cluster(apicid) (apicid & 0xF0)
 
 static inline int apic_id_registered(void)

@@ -77,11 +83,6 @@ static inline int cpu_present_to_apicid(
 		return BAD_APICID;
 }
 
-static inline int generate_logical_apicid(int quad, int phys_apicid)
-{
-	return (quad << 4) + (phys_apicid ? phys_apicid << 1 : 1);
-}
-
 static inline int apicid_to_node(int logical_apicid) 
 {
 	return logical_apicid >> 4;

@@ -95,30 +96,6 @@ static inline physid_mask_t apicid_to_cp
 	return physid_mask_of_physid(cpu + 4*node);
 }
 
-struct mpc_config_translation {
-	unsigned char mpc_type;
-	unsigned char trans_len;
-	unsigned char trans_type;
-	unsigned char trans_quad;
-	unsigned char trans_global;
-	unsigned char trans_local;
-	unsigned short trans_reserved;
-};
-
-static inline int mpc_apic_id(struct mpc_config_processor *m, 
-			struct mpc_config_translation *translation_record)
-{
-	int quad = translation_record->trans_quad;
-	int logical_apicid = generate_logical_apicid(quad, m->mpc_apicid);
-
-	printk("Processor #%d %u:%u APIC version %d (quad %d, apic %d)\n",
-	       m->mpc_apicid,
-	       (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8,
-	       (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4,
-	       m->mpc_apicver, quad, logical_apicid);
-	return logical_apicid;
-}
-
 extern void *xquad_portio;
 
 static inline void setup_portio_remap(void)

Index: linux-2.6/include/asm-x86/mach-numaq/mach_mpparse.h
===================================================================
@@ -1,14 +1,7 @@
 #ifndef __ASM_MACH_MPPARSE_H
 #define __ASM_MACH_MPPARSE_H
 
-extern void mpc_oem_bus_info(struct mpc_config_bus *m, char *name,
-			     struct mpc_config_translation *translation);
-extern void mpc_oem_pci_bus(struct mpc_config_bus *m,
-	struct mpc_config_translation *translation);
-
-/* Hook from generic ACPI tables.c */
-static inline void acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
-}
+extern void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem,
+				char *productid);
 
 #endif /* __ASM_MACH_MPPARSE_H */

Index: linux-2.6/include/asm-x86/mmzone_32.h
===================================================================
@@ -12,11 +12,9 @@
 extern struct pglist_data *node_data[];
 #define NODE_DATA(nid)	(node_data[nid])
 
-#ifdef CONFIG_X86_NUMAQ
-	#include <asm/numaq.h>
-#elif defined(CONFIG_ACPI_SRAT)/* summit or generic arch */
-	#include <asm/srat.h>
-#endif
+#include <asm/numaq.h>
+/* summit or generic arch */
+#include <asm/srat.h>
 
 extern int get_memcfg_numa_flat(void);
 /*

@@ -26,14 +24,11 @@ extern int get_memcfg_numa_flat(void);
  */
 static inline void get_memcfg_numa(void)
 {
-#ifdef CONFIG_X86_NUMAQ
+
 	if (get_memcfg_numaq())
 		return;
-#elif defined(CONFIG_ACPI_SRAT)
 	if (get_memcfg_from_srat())
 		return;
-#endif
-
 	get_memcfg_numa_flat();
 }
 

@@ -42,7 +37,6 @@ extern int early_pfn_to_nid(unsigned lon
 #else /* !CONFIG_NUMA */
 
 #define get_memcfg_numa get_memcfg_numa_flat
-#define get_zholes_size(n) (0)
 
 #endif /* CONFIG_NUMA */
 

@@ -83,9 +77,6 @@ static inline int pfn_to_nid(unsigned lo
 	__pgdat->node_start_pfn + __pgdat->node_spanned_pages;		\
 })
 
-#ifdef CONFIG_X86_NUMAQ            /* we have contiguous memory on NUMA-Q */
-#define pfn_valid(pfn)          ((pfn) < num_physpages)
-#else
 static inline int pfn_valid(int pfn)
 {
 	int nid = pfn_to_nid(pfn);

@@ -94,7 +85,6 @@ static inline int pfn_valid(int pfn)
 		return (pfn < node_end_pfn(nid));
 	return 0;
 }
-#endif /* CONFIG_X86_NUMAQ */
 
 #endif /* CONFIG_DISCONTIGMEM */
 

Index: linux-2.6/include/asm-x86/numaq.h
===================================================================
@@ -157,9 +157,10 @@ struct sys_cfg_data {
 	struct		eachquadmem eq[MAX_NUMNODES];	/* indexed by quad id */
 };
 
-static inline unsigned long *get_zholes_size(int nid)
+#else
+static inline int get_memcfg_numaq(void)
 {
-	return NULL;
+	return 0;
 }
 #endif /* CONFIG_X86_NUMAQ */
 #endif /* NUMAQ_H */

Index: linux-2.6/include/asm-x86/srat.h
===================================================================
@@ -27,11 +27,13 @@
 #ifndef _ASM_SRAT_H_
 #define _ASM_SRAT_H_
 
-#ifndef CONFIG_ACPI_SRAT
-#error CONFIG_ACPI_SRAT not defined, and srat.h header has been included
-#endif
-
+#ifdef CONFIG_ACPI_SRAT
 extern int get_memcfg_from_srat(void);
-extern unsigned long *get_zholes_size(int);
+#else
+static inline int get_memcfg_from_srat(void)
+{
+	return 0;
+}
+#endif
 
 #endif /* _ASM_SRAT_H_ */

41 lines not on this page · raw message

Index: linux-2.6/arch/x86/kernel/apic_32.c
===================================================================
@@ -1531,7 +1531,7 @@ void __cpuinit generic_processor_info(in
 	 * if (CPU_HOTPLUG_ENABLED || num_processors > 8)
 	 *       - Ashok Raj <[email protected]>
 	 */
-	if (num_processors > 8) {
+	if (apicid > 8) {
 		switch (boot_cpu_data.x86_vendor) {
 		case X86_VENDOR_INTEL:
 			if (!APIC_XAPIC(version)) {

Index: linux-2.6/arch/x86/mach-generic/bigsmp.c
===================================================================
@@ -23,10 +23,8 @@ static int dmi_bigsmp; /* can be set by 
 
 static int hp_ht_bigsmp(const struct dmi_system_id *d)
 {
-#ifdef CONFIG_X86_GENERICARCH
 	printk(KERN_NOTICE "%s detected: force use of apic=bigsmp\n", d->ident);
 	dmi_bigsmp = 1;
-#endif
 	return 0;
 }
 

@@ -48,7 +46,7 @@ static const struct dmi_system_id bigsmp
 static int probe_bigsmp(void)
 {
 	if (def_to_bigsmp)
-	dmi_bigsmp = 1;
+		dmi_bigsmp = 1;
 	else
 		dmi_check_system(bigsmp_dmi_table);
 	return dmi_bigsmp;

Index: linux-2.6/include/asm-x86/mpspec.h
===================================================================
@@ -13,6 +13,12 @@ extern int apic_version[MAX_APICS];
 extern u8 apicid_2_node[];
 extern int pic_mode;
 
+#ifdef CONFIG_X86_NUMAQ
+extern int mp_bus_id_to_node[MAX_MP_BUSSES];
+extern int mp_bus_id_to_local[MAX_MP_BUSSES];
+extern int quad_local_to_mp_bus_id [NR_CPUS/4][4];
+#endif
+
 #define MAX_APICID 256
 
 #else

Index: linux-2.6/arch/x86/kernel/summit_32.c
===================================================================
@@ -36,7 +36,9 @@ static struct rio_table_hdr *rio_table_h
 static struct scal_detail   *scal_devs[MAX_NUMNODES] __initdata;
 static struct rio_detail    *rio_devs[MAX_NUMNODES*4] __initdata;
 
+#ifndef CONFIG_X86_NUMAQ
 static int mp_bus_id_to_node[MAX_MP_BUSSES] __initdata;
+#endif
 
 static int __init setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus)
 {

Index: linux-2.6/arch/x86/boot/compressed/misc.c
===================================================================
@@ -217,10 +217,6 @@ static char *vidmem;
 static int vidport;
 static int lines, cols;
 
-#ifdef CONFIG_X86_NUMAQ
-void *xquad_portio;
-#endif
-
 #include "../../../../lib/inflate.c"
 
 static void *malloc(int size)

Index: linux-2.6/arch/x86/kernel/acpi/boot.c
===================================================================
@@ -858,7 +858,7 @@ static int __init acpi_parse_madt_lapic_
 #ifdef	CONFIG_X86_IO_APIC
 #define MP_ISA_BUS		0
 
-#if defined(CONFIG_X86_ES7000) || defined(CONFIG_X86_GENERICARCH)
+#ifdef CONFIG_X86_ES7000
 extern int es7000_plat;
 #endif
 

@@ -1007,7 +1007,7 @@ void __init mp_config_acpi_legacy_irqs(v
 	set_bit(MP_ISA_BUS, mp_bus_not_pci);
 	Dprintk("Bus #%d is ISA\n", MP_ISA_BUS);
 
-#if defined(CONFIG_X86_ES7000) || defined(CONFIG_X86_GENERICARCH)
+#ifdef CONFIG_X86_ES7000
 	/*
 	 * Older generations of ES7000 have no legacy identity mappings
 	 */

53 lines not on this page · raw message

Index: linux-2.6/arch/x86/kernel/apic_32.c
===================================================================
@@ -1520,6 +1520,9 @@ void __cpuinit generic_processor_info(in
 		 */
 		cpu = 0;
 
+	if (apicid > max_physical_apicid)
+		max_physical_apicid = apicid;
+
 	/*
 	 * Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y
 	 * but we need to work other dependencies like SMP_SUSPEND etc

@@ -1527,7 +1530,7 @@ void __cpuinit generic_processor_info(in
 	 * if (CPU_HOTPLUG_ENABLED || num_processors > 8)
 	 *       - Ashok Raj <[email protected]>
 	 */
-	if (num_processors > 8) {
+	if (max_physical_apicid >= 8) {
 		switch (boot_cpu_data.x86_vendor) {
 		case X86_VENDOR_INTEL:
 			if (!APIC_XAPIC(version)) {

Index: linux-2.6/arch/x86/kernel/apic_64.c
===================================================================
@@ -1092,6 +1092,9 @@ void __cpuinit generic_processor_info(in
 		 */
 		cpu = 0;
 	}
+	if (apicid > max_physical_apicid)
+		max_physical_apicid = apicid;
+
 	/* are we being called early in kernel startup? */
 	if (early_per_cpu_ptr(x86_cpu_to_apicid)) {
 		u16 *cpu_to_apicid = early_per_cpu_ptr(x86_cpu_to_apicid);

Index: linux-2.6/arch/x86/kernel/genapic_64.c
===================================================================
@@ -51,7 +51,7 @@ void __init setup_apic_routing(void)
 	else
 #endif
 
-	if (num_possible_cpus() <= 8)
+	if (max_physical_apicid < 8)
 		genapic = &apic_flat;
 	else
 		genapic = &apic_physflat;

Index: linux-2.6/arch/x86/kernel/mpparse.c
===================================================================
@@ -473,6 +473,11 @@ static int __init smp_read_mpc(struct mp
 		++mpc_record;
 #endif
 	}
+
+#ifdef CONFIG_X86_GENERICARCH
+       generic_bigsmp_probe();
+#endif
+
 	setup_apic_routing();
 	if (!num_processors)
 		printk(KERN_ERR "MPTABLE: no processors registered!\n");

Index: linux-2.6/arch/x86/kernel/setup.c
===================================================================
@@ -17,6 +17,7 @@ unsigned int num_processors;
 unsigned disabled_cpus __cpuinitdata;
 /* Processor that is doing the boot up */
 unsigned int boot_cpu_physical_apicid = -1U;
+unsigned int max_physical_apicid;
 EXPORT_SYMBOL(boot_cpu_physical_apicid);
 
 /* Bitmask of physically existing CPUs */

Index: linux-2.6/arch/x86/kernel/setup_32.c
===================================================================
@@ -838,18 +838,17 @@ void __init setup_arch(char **cmdline_p)
 
 #ifdef CONFIG_ACPI
 	acpi_boot_init();
-
+#endif
+#if defined(CONFIG_X86_MPPARSE) || defined(CONFIG_X86_VISWS)
+	if (smp_found_config)
+		get_smp_config();
+#endif
 #if defined(CONFIG_SMP) && defined(CONFIG_X86_PC)
 	if (def_to_bigsmp)
 		printk(KERN_WARNING "More than 8 CPUs detected and "
 			"CONFIG_X86_PC cannot handle it.\nUse "
 			"CONFIG_X86_GENERICARCH or CONFIG_X86_BIGSMP.\n");
 #endif
-#endif
-#if defined(CONFIG_X86_MPPARSE) || defined(CONFIG_X86_VISWS)
-	if (smp_found_config)
-		get_smp_config();
-#endif
 
 	e820_setup_gap();
 	e820_mark_nosave_regions(max_low_pfn);

Index: linux-2.6/arch/x86/mach-generic/bigsmp.c
===================================================================
@@ -48,7 +48,7 @@ static const struct dmi_system_id bigsmp
 static int probe_bigsmp(void)
 {
 	if (def_to_bigsmp)
-	dmi_bigsmp = 1;
+		dmi_bigsmp = 1;
 	else
 		dmi_check_system(bigsmp_dmi_table);
 	return dmi_bigsmp;

Index: linux-2.6/include/asm-x86/mpspec.h
===================================================================
@@ -33,6 +33,7 @@ extern int mp_bus_id_to_type[MAX_MP_BUSS
 extern DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES);
 
 extern unsigned int boot_cpu_physical_apicid;
+extern unsigned int max_physical_apicid;
 extern int smp_found_config;
 extern int mpc_default_type;
 extern unsigned long mp_lapic_addr;

Index: linux-2.6/arch/x86/kernel/io_apic_32.c
===================================================================
@@ -1715,7 +1715,6 @@ void disable_IO_APIC(void)
  * by Matt Domsch <[email protected]>  Tue Dec 21 12:25:05 CST 1999
  */
 
-#ifndef CONFIG_X86_NUMAQ
 static void __init setup_ioapic_ids_from_mpc(void)
 {
 	union IO_APIC_reg_00 reg_00;

@@ -1725,6 +1724,11 @@ static void __init setup_ioapic_ids_from
 	unsigned char old_id;
 	unsigned long flags;
 
+#ifdef CONFIG_X86_NUMAQ
+	if (found_numaq)
+		return;
+#endif
+
 	/*
 	 * Don't check I/O APIC IDs for xAPIC systems.  They have
 	 * no meaning without the serial APIC bus.

@@ -1821,9 +1825,6 @@ static void __init setup_ioapic_ids_from
 			apic_printk(APIC_VERBOSE, " ok.\n");
 	}
 }
-#else
-static void __init setup_ioapic_ids_from_mpc(void) { }
-#endif
 
 int no_timer_check __initdata;
 

103 lines not on this page · raw message

Index: linux-2.6/arch/x86/kernel/numaq_32.c
===================================================================
@@ -36,8 +36,6 @@
 
 #define	MB_TO_PAGES(addr) ((addr) << (20 - PAGE_SHIFT))
 
-int found_numaq;
-
 /*
  * Function: smp_dump_qct()
  *

@@ -105,13 +103,3 @@ static int __init numaq_tsc_disable(void
 }
 arch_initcall(numaq_tsc_disable);
 
-#ifdef CONFIG_ACPI
-/*
- * Dummy implementation:
- */
-struct pci_bus * __devinit
-pci_acpi_scan_root(struct acpi_device *device, int domain, int busnum)
-{
-	return NULL;
-}
-#endif

Index: linux-2.6/arch/x86/mach-generic/probe.c
===================================================================
@@ -16,6 +16,7 @@
 #include <asm/apicdef.h>
 #include <asm/genapic.h>
 
+extern struct genapic apic_numaq;
 extern struct genapic apic_summit;
 extern struct genapic apic_bigsmp;
 extern struct genapic apic_es7000;

@@ -24,9 +25,18 @@ extern struct genapic apic_default;
 struct genapic *genapic = &apic_default;
 
 static struct genapic *apic_probe[] __initdata = {
+#ifdef CONFIG_X86_NUMAQ
+	&apic_numaq,
+#endif
+#ifdef CONFIG_X86_SUMMIT
 	&apic_summit,
+#endif
+#ifdef CONFIG_X86_BIGSMP
 	&apic_bigsmp,
+#endif
+#ifdef CONFIG_X86_ES7000
 	&apic_es7000,
+#endif
 	&apic_default,	/* must be last */
 	NULL,
 };

@@ -54,6 +64,7 @@ early_param("apic", parse_apic);
 
 void __init generic_bigsmp_probe(void)
 {
+#if CONFIG_X86_BIGSMP
 	/*
 	 * This routine is used to switch to bigsmp mode when
 	 * - There is no apic= option specified by the user

@@ -67,6 +78,7 @@ void __init generic_bigsmp_probe(void)
 			printk(KERN_INFO "Overriding APIC driver with %s\n",
 			       genapic->name);
 		}
+#endif
 }
 
 void __init generic_apic_probe(void)

@@ -88,7 +100,8 @@ void __init generic_apic_probe(void)
 
 /* These functions can switch the APIC even after the initial ->probe() */
 
-int __init mps_oem_check(struct mp_config_table *mpc, char *oem, char *productid)
+int __init mps_oem_check(struct mp_config_table *mpc, char *oem,
+				 char *productid)
 {
 	int i;
 	for (i = 0; apic_probe[i]; ++i) {

Index: linux-2.6/arch/x86/pci/numa.c
===================================================================
@@ -6,45 +6,21 @@
 #include <linux/init.h>
 #include <linux/nodemask.h>
 #include <mach_apic.h>
+#include <asm/mpspec.h>
 #include "pci.h"
 
 #define XQUAD_PORTIO_BASE 0xfe400000
 #define XQUAD_PORTIO_QUAD 0x40000  /* 256k per quad. */
 
-int mp_bus_id_to_node[MAX_MP_BUSSES];
 #define BUS2QUAD(global) (mp_bus_id_to_node[global])
 
-int mp_bus_id_to_local[MAX_MP_BUSSES];
 #define BUS2LOCAL(global) (mp_bus_id_to_local[global])
 
-void mpc_oem_bus_info(struct mpc_config_bus *m, char *name,
-	struct mpc_config_translation *translation)
-{
-	int quad = translation->trans_quad;
-	int local = translation->trans_local;
-
-	mp_bus_id_to_node[m->mpc_busid] = quad;
-	mp_bus_id_to_local[m->mpc_busid] = local;
-	printk(KERN_INFO "Bus #%d is %s (node %d)\n",
-	       m->mpc_busid, name, quad);
-}
-
-int quad_local_to_mp_bus_id [NR_CPUS/4][4];
 #define QUADLOCAL2BUS(quad,local) (quad_local_to_mp_bus_id[quad][local])
-void mpc_oem_pci_bus(struct mpc_config_bus *m,
-	struct mpc_config_translation *translation)
-{
-	int quad = translation->trans_quad;
-	int local = translation->trans_local;
-
-	quad_local_to_mp_bus_id[quad][local] = m->mpc_busid;
-}
 
 /* Where the IO area was mapped on multiquad, always 0 otherwise */
 void *xquad_portio;
-#ifdef CONFIG_X86_NUMAQ
 EXPORT_SYMBOL(xquad_portio);
-#endif
 
 #define XQUAD_PORT_ADDR(port, quad) (xquad_portio + (XQUAD_PORTIO_QUAD*quad) + port)
 

@@ -179,6 +155,9 @@ static int __init pci_numa_init(void)
 {
 	int quad;
 
+	if (!found_numaq)
+		return 0;
+
 	raw_pci_ops = &pci_direct_conf1_mq;
 
 	if (pcibios_scanned++)

Index: linux-2.6/include/asm-x86/mach-generic/mach_mpparse.h
===================================================================
@@ -1,7 +1,10 @@
 #ifndef _MACH_MPPARSE_H
 #define _MACH_MPPARSE_H 1
 
-int mps_oem_check(struct mp_config_table *mpc, char *oem, char *productid); 
-int acpi_madt_oem_check(char *oem_id, char *oem_table_id); 
+
+extern int mps_oem_check(struct mp_config_table *mpc, char *oem,
+			 char *productid);
+
+extern int acpi_madt_oem_check(char *oem_id, char *oem_table_id);
 
 #endif

Index: linux-2.6/include/asm-x86/mach-numaq/mach_apic.h
===================================================================
@@ -20,8 +20,14 @@ static inline cpumask_t target_cpus(void
 #define INT_DELIVERY_MODE dest_LowestPrio
 #define INT_DEST_MODE 0     /* physical delivery on LOCAL quad */
  
-#define check_apicid_used(bitmap, apicid) physid_isset(apicid, bitmap)
-#define check_apicid_present(bit) physid_isset(bit, phys_cpu_present_map)
+static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
+{
+	return physid_isset(apicid, bitmap);
+}
+static inline unsigned long check_apicid_present(int bit)
+{
+	return physid_isset(bit, phys_cpu_present_map);
+}
 #define apicid_cluster(apicid) (apicid & 0xF0)
 
 static inline int apic_id_registered(void)

@@ -77,11 +83,6 @@ static inline int cpu_present_to_apicid(
 		return BAD_APICID;
 }
 
-static inline int generate_logical_apicid(int quad, int phys_apicid)
-{
-	return (quad << 4) + (phys_apicid ? phys_apicid << 1 : 1);
-}
-
 static inline int apicid_to_node(int logical_apicid) 
 {
 	return logical_apicid >> 4;

@@ -95,30 +96,6 @@ static inline physid_mask_t apicid_to_cp
 	return physid_mask_of_physid(cpu + 4*node);
 }
 
-struct mpc_config_translation {
-	unsigned char mpc_type;
-	unsigned char trans_len;
-	unsigned char trans_type;
-	unsigned char trans_quad;
-	unsigned char trans_global;
-	unsigned char trans_local;
-	unsigned short trans_reserved;
-};
-
-static inline int mpc_apic_id(struct mpc_config_processor *m, 
-			struct mpc_config_translation *translation_record)
-{
-	int quad = translation_record->trans_quad;
-	int logical_apicid = generate_logical_apicid(quad, m->mpc_apicid);
-
-	printk("Processor #%d %u:%u APIC version %d (quad %d, apic %d)\n",
-	       m->mpc_apicid,
-	       (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8,
-	       (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4,
-	       m->mpc_apicver, quad, logical_apicid);
-	return logical_apicid;
-}
-
 extern void *xquad_portio;
 
 static inline void setup_portio_remap(void)

Index: linux-2.6/include/asm-x86/mach-numaq/mach_mpparse.h
===================================================================
@@ -1,14 +1,7 @@
 #ifndef __ASM_MACH_MPPARSE_H
 #define __ASM_MACH_MPPARSE_H
 
-extern void mpc_oem_bus_info(struct mpc_config_bus *m, char *name,
-			     struct mpc_config_translation *translation);
-extern void mpc_oem_pci_bus(struct mpc_config_bus *m,
-	struct mpc_config_translation *translation);
-
-/* Hook from generic ACPI tables.c */
-static inline void acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
-}
+extern void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem,
+				char *productid);
 
 #endif /* __ASM_MACH_MPPARSE_H */

Index: linux-2.6/include/asm-x86/mmzone_32.h
===================================================================
@@ -12,11 +12,9 @@
 extern struct pglist_data *node_data[];
 #define NODE_DATA(nid)	(node_data[nid])
 
-#ifdef CONFIG_X86_NUMAQ
-	#include <asm/numaq.h>
-#elif defined(CONFIG_ACPI_SRAT)/* summit or generic arch */
-	#include <asm/srat.h>
-#endif
+#include <asm/numaq.h>
+/* summit or generic arch */
+#include <asm/srat.h>
 
 extern int get_memcfg_numa_flat(void);
 /*

@@ -26,14 +24,11 @@ extern int get_memcfg_numa_flat(void);
  */
 static inline void get_memcfg_numa(void)
 {
-#ifdef CONFIG_X86_NUMAQ
+
 	if (get_memcfg_numaq())
 		return;
-#elif defined(CONFIG_ACPI_SRAT)
 	if (get_memcfg_from_srat())
 		return;
-#endif
-
 	get_memcfg_numa_flat();
 }
 

@@ -42,7 +37,6 @@ extern int early_pfn_to_nid(unsigned lon
 #else /* !CONFIG_NUMA */
 
 #define get_memcfg_numa get_memcfg_numa_flat
-#define get_zholes_size(n) (0)
 
 #endif /* CONFIG_NUMA */
 

@@ -83,9 +77,6 @@ static inline int pfn_to_nid(unsigned lo
 	__pgdat->node_start_pfn + __pgdat->node_spanned_pages;		\
 })
 
-#ifdef CONFIG_X86_NUMAQ            /* we have contiguous memory on NUMA-Q */
-#define pfn_valid(pfn)          ((pfn) < num_physpages)
-#else
 static inline int pfn_valid(int pfn)
 {
 	int nid = pfn_to_nid(pfn);

@@ -94,7 +85,6 @@ static inline int pfn_valid(int pfn)
 		return (pfn < node_end_pfn(nid));
 	return 0;
 }
-#endif /* CONFIG_X86_NUMAQ */
 
 #endif /* CONFIG_DISCONTIGMEM */
 

Index: linux-2.6/include/asm-x86/numaq.h
===================================================================
@@ -157,9 +157,10 @@ struct sys_cfg_data {
 	struct		eachquadmem eq[MAX_NUMNODES];	/* indexed by quad id */
 };
 
-static inline unsigned long *get_zholes_size(int nid)
+#else
+static inline int get_memcfg_numaq(void)
 {
-	return NULL;
+	return 0;
 }
 #endif /* CONFIG_X86_NUMAQ */
 #endif /* NUMAQ_H */

Index: linux-2.6/include/asm-x86/srat.h
===================================================================
@@ -27,11 +27,13 @@
 #ifndef _ASM_SRAT_H_
 #define _ASM_SRAT_H_
 
-#ifndef CONFIG_ACPI_SRAT
-#error CONFIG_ACPI_SRAT not defined, and srat.h header has been included
-#endif
-
+#ifdef CONFIG_ACPI_SRAT
 extern int get_memcfg_from_srat(void);
-extern unsigned long *get_zholes_size(int);
+#else
+static inline int get_memcfg_from_srat(void)
+{
+	return 0;
+}
+#endif
 
 #endif /* _ASM_SRAT_H_ */

41 lines not on this page · raw message

Index: linux-2.6/arch/x86/mach-generic/bigsmp.c
===================================================================
@@ -23,10 +23,8 @@ static int dmi_bigsmp; /* can be set by 
 
 static int hp_ht_bigsmp(const struct dmi_system_id *d)
 {
-#ifdef CONFIG_X86_GENERICARCH
 	printk(KERN_NOTICE "%s detected: force use of apic=bigsmp\n", d->ident);
 	dmi_bigsmp = 1;
-#endif
 	return 0;
 }
 

Index: linux-2.6/include/asm-x86/mpspec.h
===================================================================
@@ -13,6 +13,12 @@ extern int apic_version[MAX_APICS];
 extern u8 apicid_2_node[];
 extern int pic_mode;
 
+#ifdef CONFIG_X86_NUMAQ
+extern int mp_bus_id_to_node[MAX_MP_BUSSES];
+extern int mp_bus_id_to_local[MAX_MP_BUSSES];
+extern int quad_local_to_mp_bus_id [NR_CPUS/4][4];
+#endif
+
 #define MAX_APICID 256
 
 #else

Index: linux-2.6/arch/x86/kernel/summit_32.c
===================================================================
@@ -36,7 +36,9 @@ static struct rio_table_hdr *rio_table_h
 static struct scal_detail   *scal_devs[MAX_NUMNODES] __initdata;
 static struct rio_detail    *rio_devs[MAX_NUMNODES*4] __initdata;
 
+#ifndef CONFIG_X86_NUMAQ
 static int mp_bus_id_to_node[MAX_MP_BUSSES] __initdata;
+#endif
 
 static int __init setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus)
 {

Index: linux-2.6/arch/x86/boot/compressed/misc.c
===================================================================
@@ -217,10 +217,6 @@ static char *vidmem;
 static int vidport;
 static int lines, cols;
 
-#ifdef CONFIG_X86_NUMAQ
-void *xquad_portio;
-#endif
-
 #include "../../../../lib/inflate.c"
 
 static void *malloc(int size)

Index: linux-2.6/arch/x86/kernel/acpi/boot.c
===================================================================
@@ -858,7 +858,7 @@ static int __init acpi_parse_madt_lapic_
 #ifdef	CONFIG_X86_IO_APIC
 #define MP_ISA_BUS		0
 
-#if defined(CONFIG_X86_ES7000) || defined(CONFIG_X86_GENERICARCH)
+#ifdef CONFIG_X86_ES7000
 extern int es7000_plat;
 #endif
 

@@ -1007,7 +1007,7 @@ void __init mp_config_acpi_legacy_irqs(v
 	set_bit(MP_ISA_BUS, mp_bus_not_pci);
 	Dprintk("Bus #%d is ISA\n", MP_ISA_BUS);
 
-#if defined(CONFIG_X86_ES7000) || defined(CONFIG_X86_GENERICARCH)
+#ifdef CONFIG_X86_ES7000
 	/*
 	 * Older generations of ES7000 have no legacy identity mappings
 	 */

53 lines not on this page · raw message