budget_av, high cpuload with kncone tvstar

Hi,

I have one knc one tvstar.
After loading budget_av the machine show this:
uptime
20:44:58 up 37 min, 2 users, load average: 0.71, 0.65, 0.67
[...]

Hi,

I have one knc one tvstar.
After loading budget_av the machine show this:
uptime
20:44:58 up 37 min, 2 users, load average: 0.71, 0.65, 0.67

When I unload the modules the load is 0.00.
The machine is a amd athlon x2 1900 mhz.
running a i686 kenel 2.6.25 from debian.
Here is dmesg output:

[ 2044.394304] saa7146: register extension 'budget_av'.
[ 2044.394345] ACPI: PCI Interrupt 0000:03:02.0[A] -> GSI 22 (level,
low) -> IRQ
 22
[ 2044.394370] saa7146: found saa7146 @ mem f8a64400 (revision 1, irq
22) (0x189
4,0x0014).
[ 2044.394380] saa7146 (0): dma buffer size 192512
[ 2044.394384] DVB: registering new adapter (KNC TV STAR DVB-S)
[ 2044.398012] adapter failed MAC signature check
[ 2044.398020] encoded MAC from EEPROM was
ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:f
f:ff:ff:ff:ff:ff:ff:ff
[ 2044.666029] KNC1-0: MAC addr = 00:09:d6:65:83:60
[ 2045.017670] DVB: registering frontend 0 (ST STV0299 DVB-S)...
[ 2045.021319] budget-av: ci interface initialised.

thanks for any help.
Halim

Quoted 28 lines · Halim Sahin

Hi,

I have one knc one tvstar.
After loading budget_av the machine show this:
uptime
20:44:58 up 37 min, 2 users, load average: 0.71, 0.65, 0.67

When I unload the modules the load is 0.00.
The machine is a amd athlon x2 1900 mhz.
running a i686 kenel 2.6.25 from debian.
Here is dmesg output:

[ 2044.394304] saa7146: register extension 'budget_av'.
[ 2044.394345] ACPI: PCI Interrupt 0000:03:02.0[A] -> GSI 22 (level,
low) -> IRQ
 22
[ 2044.394370] saa7146: found saa7146 @ mem f8a64400 (revision 1, irq
22) (0x189
4,0x0014).
[ 2044.394380] saa7146 (0): dma buffer size 192512
[ 2044.394384] DVB: registering new adapter (KNC TV STAR DVB-S)
[ 2044.398012] adapter failed MAC signature check
[ 2044.398020] encoded MAC from EEPROM was
ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:f
f:ff:ff:ff:ff:ff:ff:ff
[ 2044.666029] KNC1-0: MAC addr = 00:09:d6:65:83:60
[ 2045.017670] DVB: registering frontend 0 (ST STV0299 DVB-S)...
[ 2045.021319] budget-av: ci interface initialised.

Quoted 2 lines

thanks for any help.
Halim

See http://linuxtv.org/pipermail/linux-dvb/2008-April/025248.html
That fix is in the current HG driver, and will be included in 2.6.26.

CU
Oliver

Signature · 8 lines

----------------------------------------------------------------
VDR Remote Plugin 0.4.0: http://www.escape-edv.de/endriss/vdr/
----------------------------------------------------------------

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Hi Oliver,
Thanks a lot thats it.
I have on emore Question:
dmesg says ci interface initialized but this card has not a ci connector.
Is there a way to disable ci support completely?