Removal of BAST IDE driver
Referring to this commit in mainline:
commit ac1623625c5818bbdf5c68973098ba386ba7a004
Author: Ben Dooks <[email protected]> Date: Fri Jun 20 20:53:35 2008 +0200
BAST: Remove old IDE driver
Remove the old BAST IDE driver, as we are now using the platform-pata support.
I've recieved a couple of patches for the next merge window from Ben which say:
Quoted 5 lines
Subject: [patch 20/32] BAST/VR1000: Move to using
ata_platform(libata)Use the
pata_platformdriver to provide the IDE port drivers on the Simntec BAST and Thorcom VR1000 machines as a precursor to removingdrivers/ide/arm/bast-ide.c
And when I queried Ben on this, he responded thusly:
09:58 < fluffy> yes, bart was rather quicker at applying the removal patch 09:59 < fluffy> i send 'for next kernel release' and he shoved it in his -rc6
sub
So, quite clearly we have a regression - we have platforms which have lost IDE support.
There's two ways to resolve this. Either the above commit can be reverted restoring old IDE support, or the patches to add libata support for these platforms can be submitted. Given where we are in the -rc, I think reverting the bad commit would be more sensible.
The question also has to be asked - what are maintainers doing putting driver removals into -rc kernels? Surely they are only merge-window candidates?
Signature · 3 lines
Russell King Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/ maintainer of:
Hi,
Quoted 30 lines · Russell King
Referring to this commit in mainline:
commit
ac1623625c5818bbdf5c68973098ba386ba7a004Author: Ben Dooks <[email protected]> Date: Fri Jun 20 20:53:35 2008 +0200BAST: Remove old IDE driver
Remove the old BAST IDE driver, as we are now using the platform-pata support.
Signed-off-by Ben Dooks <[email protected]>Cc Jeff Garzik <[email protected]>Signed-off-by Bartlomiej Zolnierkiewicz <[email protected]>I've recieved a couple of patches for the next merge window from Ben which say:
Quoted 5 lines
Subject: [patch 20/32] BAST/VR1000: Move to using
ata_platform(libata)Use the
pata_platformdriver to provide the IDE port drivers on the Simntec BAST and Thorcom VR1000 machines as a precursor to removingdrivers/ide/arm/bast-ide.cAnd when I queried Ben on this, he responded thusly:
09:58 < fluffy> yes, bart was rather quicker at applying the removal patch 09:59 < fluffy> i send 'for next kernel release' and he shoved it in his -rc6
sub
Quoted 5 lines
So, quite clearly we have a regression - we have platforms which have lost IDE support.
There's two ways to resolve this. Either the above commit can be reverted restoring old IDE support, or the patches to add libata
The libata part is already in, we just need an arch part.
[ Looks like we need this patch from 2008-05-29:
http://article.gmane.org/gmane.linux.ports.arm.kernel/42021 ]
Quoted 2 lines
support for these platforms can be submitted. Given where we are in the -rc, I think reverting the bad commit would be more sensible.
I think that it is up to arch maintainer to decide, either way is fine with me.
Quoted 3 lines
The question also has to be asked - what are maintainers doing putting driver removals into -rc kernels? Surely they are only merge-window candidates?
This was a special case as indicated in pull request:
...
[ not strictly -rc stuff but as we are now using the platform-pata
support lets not confuse people with having this driver around ]
...
I somehow missed 'the next release' part (please indicate it more clearly when sending patches and always tell us that there are some other patches which should be merged before if you are not including them in the patch series) so when later Jeff merged:
commit cc18e0fea7907e7a96b7df71b81838d518bc074e
Author: Ben Dooks <[email protected]> Date: Mon Jun 16 12:16:26 2008 +0100
LIBATA: Add HAVE_PATA_PLATFORM to select PATA_PLATFORM driver
...
which was patch #1/2 in the series I was under impression that now we have both new and old driver with the old driver being the default because of the link order. Seems I was wrong after all as other things are moving slower than IDE/ATA. ;)
Sorry for messing things up. Russell/Ben: how should we proceed with fixing it (arch part in or ide part out)?
Thanks,
Bart
Quoted 9 lines · Bartlomiej Zolnierkiewicz
series) so when later Jeff merged:
commit
cc18e0fea7907e7a96b7df71b81838d518bc074eAuthor: Ben Dooks <[email protected]> Date: Mon Jun 16 12:16:26 2008 +0100LIBATA: Add
HAVE_PATA_PLATFORMto selectPATA_PLATFORMdriver
...
Quoted 7 lines
which was patch #1/2 in the series I was under impression that now we have both new and old driver with the old driver being the default because of the link order. Seems I was wrong after all as other things are moving slower than IDE/ATA. ;)
Sorry for messing things up. Russell/Ben: how should we proceed with fixing it (arch part in or ide part out)?
Ben's change merely adds a knob that a platform may set, in order to enable the existing pata_platform driver, which is pretty safe by itself.
The next piece -- once not in 2.6.26 AFAIK -- is arch-specific code selecting HAVE_PATA_PLATFORM. BAST IDE, I assume, can go away once relevant platforms start turning on HAVE_PATA_PLATFORM.
Jeff
Quoted 6 lines · Jeff Garzik
Ben's change merely adds a knob that a platform may set, in order to enable the existing
pata_platformdriver, which is pretty safe by itself.The next piece -- once not in 2.6.26 AFAIK -- is arch-specific code selecting
HAVE_PATA_PLATFORM. BAST IDE, I assume, can go away once relevant platforms start turning onHAVE_PATA_PLATFORM.
There's a bit more than just turning on HAVE_PATA_PLATFORM - there's also the relevant arch code to register the PATA platform device and provide the resources and platform data to properly configure the PATA platform driver.
So there's a number of patches required:
- the addition of HAVE_PATA_PLATFORM (already merged by Jeff)
- "BAST/VR1000: Move to using ata_platform (libata)" to add the arch specific bits
- "ANUBIS: Move to using ata_platform driver (libata)" for another arch bit (which the following patch needs)
- "LIBATA: update Kconfig to allow new ata_platform dependencies" so that the converted platforms select HAVE_PATA_PLATFORM
then, and only then, should drivers/ide/arm/bast-ide.c be removed - that's the earliest point at which PATA becomes usable in mainline.
A note for Ben: I think the libata patch above should be rolled into the other two patches so that bast can use the PATA code as soon as the arch support code has been merged, rather than the current approach where the libata patch enables the feature for all platforms.
Signature · 3 lines
Russell King Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/ maintainer of: