inflate: refactor inflate malloc code
Subsystems (6)
Hi,
The enclosed patch cleans up the inflate code used at boot time to uncompress the kernel. This patch has been acked by David Howells for the MN10300 architecture a long time ago
(http://lkml.org/lkml/2008/3/12/183). I have hopefully fixed the issues raised by Russell King (http://lkml.org/lkml/2008/2/18/217) and Byron Bradley (http://lkml.org/lkml/2008/2/16/202).
Because this patch touches several architectures, I've CC-ed all the architecture maintainers concerned by the patch. For H8300, no maintainer is listed in MAINTAINERS, so by looking at the git history, I assumed that Yoshinori Sato <[email protected]> would be able to review the patch.
The patch has been compiled and boot tested on x86 and ARM.
Sincerly,
Thomas
---
inflate: refactor inflate malloc code
Inflate requires some dynamic memory allocation very early in the boot process and this is provided with a set of four functions:
malloc/free/gzip_mark/gzip_release.
The old inflate code used a mark/release strategy rather than implement free. This new version instead keeps a count on the number of outstanding allocations and when it hits zero, it resets the malloc arena.
This allows removing all the mark and release implementations and unifying all the malloc/free implementations.
The architecture-dependent code must define two addresses:
- free_mem_ptr, the address of the beginning of the area in which allocations should be made
- free_mem_end_ptr, the address of the end of the area in which allocations should be made. If set to 0, then no check is made on the number of allocations, it just grows as much as needed
The architecture-dependent code can also provide an arch_decomp_wdog() function call. This function will be called several times during the decompression process, and allow to notify the watchdog that the system is still running. If an architecture provides such a call, then it must define ARCH_HAS_DECOMP_WDOG so that the generic inflate code calls arch_decomp_wdog().
Work initially done by Matt Mackall <[email protected]>, updated to a recent version of the kernel and improved by me.
--- arch/alpha/boot/misc.c | 39 +------------------ arch/arm/boot/compressed/misc.c | 59 +++--------------------------- arch/cris/arch-v10/boot/compressed/misc.c | 35 ----------------- arch/cris/arch-v32/boot/compressed/misc.c | 35 ----------------- arch/h8300/boot/compressed/misc.c | 38 ------------------- arch/m32r/boot/compressed/misc.c | 37 ------------------ arch/mn10300/boot/compressed/misc.c | 37 ------------------ arch/sh/boot/compressed/misc_32.c | 38 ------------------- arch/sh/boot/compressed/misc_64.c | 40 -------------------- arch/x86/boot/compressed/misc.c | 39 ------------------- init/do_mounts_rd.c | 25 +----------- init/initramfs.c | 22 +---------- lib/inflate.c | 52 ++++++++++++++++++++++---- 13 files changed, 60 insertions(+), 436 deletions(-)
arch/alpha/boot/misc.c +2 -37
@@ -78,8 +78,6 @@static int fill_inbuf (void );static void flush_window (void );static void error (char *m); -static void gzip_mark (void **); -static void gzip_release (void **);static char *input_data;static int input_data_size;
@@ -88,51 +86,18 @@static ulg output_ptr;static ulg bytes_out; -static void *malloc (int size); -static void free (void *where);static void error (char *m);static void gzip_mark (void **);static void gzip_release (void **);extern int end;static ulg free_mem_ptr; -static ulg free_mem_ptr_end; +static ulg free_mem_end_ptr;#define HEAP_SIZE 0x3000#include "../../../lib/inflate.c" -static void *malloc (int size) -{ -void *p; - -if (size <0 )error ("Malloc error" ); -if (free_mem_ptr <=0 )error ("Memory error" ); - - free_mem_ptr = (free_mem_ptr +3 ) & ~3 ;/* Align */ - - p = (void *)free_mem_ptr; - free_mem_ptr += size; - -if (free_mem_ptr >= free_mem_ptr_end) -error ("Out of memory" ); -return p; -} - -static void free (void *where) -{/* gzip_mark & gzip_release do the free */ -} - -static void gzip_mark (void **ptr) -{ - *ptr = (void *) free_mem_ptr; -} - -static void gzip_release (void **ptr) -{ - free_mem_ptr = (long ) *ptr; -} -/* =========================================================================== * Fill the input buffer. This is called only when the buffer is empty * and at least one byte is really needed.
@@ -193,7 +158,7 @@/* FIXME FIXME FIXME */ free_mem_ptr = (ulg )output_start + ksize; - free_mem_ptr_end = (ulg )output_start + ksize +0x200000 ; + free_mem_end_ptr = (ulg )output_start + ksize +0x200000 ;/* FIXME FIXME FIXME */ /* put in temp area to reduce initial footprint */
arch/arm/boot/compressed/misc.c +7 -52
86 lines not on this page · raw message
arch/cris/arch-v10/boot/compressed/misc.c +1 -34
@@ -84,8 +84,6 @@static int fill_inbuf (void );static void flush_window (void );static void error (char *m); -static void gzip_mark (void **); -static void gzip_release (void **);extern char *input_data;/* lives in head.S */
@@ -93,11 +91,7 @@static uch *output_data;static unsigned long output_ptr =0 ; -static void *malloc (int size); -static void free (void *where);static void error (char *m); -static void gzip_mark (void **); -static void gzip_release (void **);static void puts (const char *);
@@ -105,37 +99,10 @@extern int end;static long free_mem_ptr = (long )&end; +static long free_mem_end_ptr =0 ;#include "../../../../../lib/inflate.c" -static void *malloc (int size) -{ -void *p; - -if (size <0 )error ("Malloc error" ); - - free_mem_ptr = (free_mem_ptr +3 ) & ~3 ;/* Align */ - - p = (void *)free_mem_ptr; - free_mem_ptr += size; - -return p; -} - -static void free (void *where) -{/* Don't care */ -} - -static void gzip_mark (void **ptr) -{ - *ptr = (void *) free_mem_ptr; -} - -static void gzip_release (void **ptr) -{ - free_mem_ptr = (long ) *ptr; -} -/* decompressor info and error messages to serial console */ static void
arch/cris/arch-v32/boot/compressed/misc.c +1 -34
@@ -89,8 +89,6 @@static void flush_window (void );static void error (char *m); -static void gzip_mark (void **); -static void gzip_release (void **);extern char *input_data;/* lives in head.S */
@@ -98,11 +96,7 @@static uch *output_data;static unsigned long output_ptr =0 ; -static void *malloc (int size); -static void free (void *where);static void error (char *m); -static void gzip_mark (void **); -static void gzip_release (void **);static void puts (const char *);
@@ -110,37 +104,10 @@extern int _end;static long free_mem_ptr = (long )&_end; +static long free_mem_end_ptr =0 ;#include "../../../../../lib/inflate.c" -static void *malloc (int size) -{ -void *p; - -if (size <0 )error ("Malloc error" ); - - free_mem_ptr = (free_mem_ptr +3 ) & ~3 ;/* Align */ - - p = (void *)free_mem_ptr; - free_mem_ptr += size; - -return p; -} - -static void free (void *where) -{/* Don't care */ -} - -static void gzip_mark (void **ptr) -{ - *ptr = (void *) free_mem_ptr; -} - -static void gzip_release (void **ptr) -{ - free_mem_ptr = (long ) *ptr; -} -/* decompressor info and error messages to serial console */ static inline void
arch/h8300/boot/compressed/misc.c +0 -38
@@ -67,8 +67,6 @@static int fill_inbuf (void );static void flush_window (void );static void error (char *m); -static void gzip_mark (void **); -static void gzip_release (void **);extern char input_data[];extern int input_len;
@@ -77,11 +75,7 @@static uch *output_data;static unsigned long output_ptr =0 ; -static void *malloc (int size); -static void free (void *where);static void error (char *m); -static void gzip_mark (void **); -static void gzip_release (void **);int puts (const char *);
@@ -98,38 +92,6 @@#define TDR *((volatile unsigned char *)0xffff8b)#define SSR *((volatile unsigned char *)0xffff8c) -static void *malloc (int size) -{ -void *p; - -if (size <0 )error ("Malloc error" ); -if (free_mem_ptr ==0 )error ("Memory error" ); - - free_mem_ptr = (free_mem_ptr +3 ) & ~3 ;/* Align */ - - p = (void *)free_mem_ptr; - free_mem_ptr += size; - -if (free_mem_ptr >= free_mem_end_ptr) -error ("Out of memory" ); - -return p; -} - -static void free (void *where) -{/* Don't care */ -} - -static void gzip_mark (void **ptr) -{ - *ptr = (void *) free_mem_ptr; -} - -static void gzip_release (void **ptr) -{ - free_mem_ptr = (long ) *ptr; -} -int puts (const char *s) {return 0 ;
arch/m32r/boot/compressed/misc.c +0 -37
@@ -70,8 +70,6 @@static int fill_inbuf (void );static void flush_window (void );static void error (char *m); -static void gzip_mark (void **); -static void gzip_release (void **);static unsigned char *input_data;static int input_len;
@@ -82,9 +80,6 @@#include "m32r_sio.c" -static void *malloc (int size); -static void free (void *where); -static unsigned long free_mem_ptr;static unsigned long free_mem_end_ptr;
@@ -92,38 +87,6 @@#include "../../../../lib/inflate.c" -static void *malloc (int size) -{ -void *p; - -if (size <0 )error ("Malloc error" ); -if (free_mem_ptr ==0 )error ("Memory error" ); - - free_mem_ptr = (free_mem_ptr +3 ) & ~3 ;/* Align */ - - p = (void *)free_mem_ptr; - free_mem_ptr += size; - -if (free_mem_ptr >= free_mem_end_ptr) -error ("Out of memory" ); - -return p; -} - -static void free (void *where) -{/* Don't care */ -} - -static void gzip_mark (void **ptr) -{ - *ptr = (void *) free_mem_ptr; -} - -static void gzip_release (void **ptr) -{ - free_mem_ptr = (long ) *ptr; -} -void *memset (void * s,int c,size_t n) {int i;
arch/mn10300/boot/compressed/misc.c +0 -37
@@ -153,26 +153,9 @@static unsigned long output_ptr; -static void *malloc (int size); - -static inline void free (void *where) -{/* Don't care */ -} -static unsigned long free_mem_ptr = (unsigned long ) &end;static unsigned long free_mem_end_ptr = (unsigned long ) &end +0x90000 ; -static inline void gzip_mark (void **ptr) -{ -kputs ("." ); - *ptr = (void *) free_mem_ptr; -} - -static inline void gzip_release (void **ptr) -{ - free_mem_ptr = (unsigned long ) *ptr; -} -#define INPLACE_MOVE_ROUTINE 0x1000#define LOW_BUFFER_START 0x2000#define LOW_BUFFER_END 0x90000
@@ -186,26 +169,6 @@#include "../../../../lib/inflate.c" -static void *malloc (int size) -{ -void *p; - -if (size <0 ) -error ("Malloc error\n" ); -if (!free_mem_ptr) -error ("Memory error\n" ); - - free_mem_ptr = (free_mem_ptr +3 ) & ~3 ;/* Align */ - - p = (void *) free_mem_ptr; - free_mem_ptr += size; - -if (free_mem_ptr >= free_mem_end_ptr) -error ("\nOut of memory\n" ); - -return p; -} -static inline void scroll (void ) {int i;
arch/sh/boot/compressed/misc_32.c +0 -38
@@ -74,8 +74,6 @@static int fill_inbuf (void );static void flush_window (void );static void error (char *m); -static void gzip_mark (void **); -static void gzip_release (void **);extern char input_data[];extern int input_len;
@@ -84,11 +82,7 @@static uch *output_data;static unsigned long output_ptr =0 ; -static void *malloc (int size); -static void free (void *where);static void error (char *m); -static void gzip_mark (void **); -static void gzip_release (void **);int puts (const char *);
@@ -101,38 +95,6 @@#include "../../../../lib/inflate.c" -static void *malloc (int size) -{ -void *p; - -if (size <0 )error ("Malloc error" ); -if (free_mem_ptr ==0 )error ("Memory error" ); - - free_mem_ptr = (free_mem_ptr +3 ) & ~3 ;/* Align */ - - p = (void *)free_mem_ptr; - free_mem_ptr += size; - -if (free_mem_ptr >= free_mem_end_ptr) -error ("Out of memory" ); - -return p; -} - -static void free (void *where) -{/* Don't care */ -} - -static void gzip_mark (void **ptr) -{ - *ptr = (void *) free_mem_ptr; -} - -static void gzip_release (void **ptr) -{ - free_mem_ptr = (long ) *ptr; -} -#ifdef CONFIG_SH_STANDARD_BIOS size_t strlen (const char *s) {
arch/sh/boot/compressed/misc_64.c +0 -40
@@ -72,8 +72,6 @@static int fill_inbuf (void );static void flush_window (void );static void error (char *m); -static void gzip_mark (void **); -static void gzip_release (void **);extern char input_data[];extern int input_len;
@@ -82,11 +80,7 @@static uch *output_data;static unsigned long output_ptr =0 ; -static void *malloc (int size); -static void free (void *where);static void error (char *m); -static void gzip_mark (void **); -static void gzip_release (void **);static void puts (const char *);
@@ -99,40 +93,6 @@#include "../../../../lib/inflate.c" -static void *malloc (int size) -{ -void *p; - -if (size <0 ) -error ("Malloc error\n" ); -if (free_mem_ptr ==0 ) -error ("Memory error\n" ); - - free_mem_ptr = (free_mem_ptr +3 ) & ~3 ;/* Align */ - - p = (void *) free_mem_ptr; - free_mem_ptr += size; - -if (free_mem_ptr >= free_mem_end_ptr) -error ("\nOut of memory\n" ); - -return p; -} - -static void free (void *where) -{/* Don't care */ -} - -static void gzip_mark (void **ptr) -{ - *ptr = (void *) free_mem_ptr; -} - -static void gzip_release (void **ptr) -{ - free_mem_ptr = (long ) *ptr; -} -void puts (const char *s) { }
arch/x86/boot/compressed/misc.c +0 -39
@@ -181,8 +181,6 @@static int fill_inbuf (void );static void flush_window (void );static void error (char *m); -static void gzip_mark (void **); -static void gzip_release (void **);/* * This is set up by the setup-routine at boot-time
@@ -200,9 +198,6 @@static long bytes_out; -static void *malloc (int size); -static void free (void *where); -static void *memset (void *s,int c,unsigned n);static void *memcpy (void *dest,const void *src,unsigned n);
@@ -227,40 +222,6 @@#include "../../../../lib/inflate.c" -static void *malloc (int size) -{ -void *p; - -if (size <0 ) -error ("Malloc error" ); -if (free_mem_ptr <=0 ) -error ("Memory error" ); - - free_mem_ptr = (free_mem_ptr +3 ) & ~3 ;/* Align */ - - p = (void *)free_mem_ptr; - free_mem_ptr += size; - -if (free_mem_ptr >= free_mem_end_ptr) -error ("Out of memory" ); - -return p; -} - -static void free (void *where) -{/* Don't care */ -} - -static void gzip_mark (void **ptr) -{ - *ptr = (void *) free_mem_ptr; -} - -static void gzip_release (void **ptr) -{ - free_mem_ptr = (memptr) *ptr; -} -static void scroll (void ) {int i;
init/do_mounts_rd.c +2 -23
@@ -313,32 +313,11 @@static int __init fill_inbuf (void );static void __init flush_window (void ); -static void __init *malloc (size_t size); -static void __init free (void *where);static void __init error (char *m); -static void __init gzip_mark (void **); -static void __init gzip_release (void **); -#include "../lib/inflate.c" - -static void __init *malloc (size_t size) -{ -return kmalloc (size,GFP_KERNEL ); -} - -static void __init free (void *where) -{ -kfree (where); -} - -static void __init gzip_mark (void **ptr) -{ -} - -static void __init gzip_release (void **ptr) -{ -} +#define NO_INFLATE_MALLOC +#include "../lib/inflate.c" /* =========================================================================== * Fill the input buffer. This is called only when the buffer is empty
init/initramfs.c +2 -20
@@ -14,16 +14,6 @@ message = x; } -static void __init *malloc (size_t size) -{ -return kmalloc (size,GFP_KERNEL ); -} - -static void __init free (void *where) -{ -kfree (where); -} -/* link hash */ #define N_ALIGN (len) ((((len) + 1) & ~3) + 2)
@@ -407,18 +397,10 @@static void __init flush_window (void );static void __init error (char *m); -static void __init gzip_mark (void **); -static void __init gzip_release (void **); -#include "../lib/inflate.c" +#define NO_INFLATE_MALLOC -static void __init gzip_mark (void **ptr) -{ -} - -static void __init gzip_release (void **ptr) -{ -} +#include "../lib/inflate.c" /* =========================================================================== * Write the output window window[0..outcnt-1] and update crc and bytes_out.
lib/inflate.c +45 -7
70 lines not on this page · raw message
Signature · 4 lines
Thomas Petazzoni, Free Electrons Kernel, drivers and embedded Linux development, consulting, training and support. http://free-electrons.com
Paul Mundt
Acked-byQuoted 6 lines · Thomas Petazzoni
Because this patch touches several architectures, I've CC-ed all the architecture maintainers concerned by the patch. For H8300, no maintainer is listed in
MAINTAINERS, so by looking at the git history, I assumed that Yoshinori Sato <[email protected]> would be able to review the patch.
There is, it's just hiding from you (the / is silent):
UCLINUX FOR RENESAS H8/300
P: Yoshinori Sato M: [email protected] W: http://uclinux-h8.sourceforge.jp/ S: Supported
Quoted 2 lines
Signed-off-by Thomas Petazzoni <[email protected]>
sh bits:
At Mon, 30 Jun 2008 15:23:34 +0200,
Quoted 10 lines · Thomas Petazzoni
Hi,
The enclosed patch cleans up the inflate code used at boot time to uncompress the kernel. This patch has been acked by David Howells for the MN10300 architecture a long time ago
(http://lkml.org/lkml/2008/3/12/183). I have hopefully fixed the issues raised by Russell King (http://lkml.org/lkml/2008/2/18/217) and Byron Bradley (http://lkml.org/lkml/2008/2/16/202).
Quoted 5 lines
Because this patch touches several architectures, I've CC-ed all the architecture maintainers concerned by the patch. For H8300, no maintainer is listed in
MAINTAINERS, so by looking at the git history, I assumed that Yoshinori Sato <[email protected]> would be able to review the patch.
No problem.
I'm maintenance h8300.
Quoted 901 lines
The patch has been compiled and boot tested on x86 and ARM.
Sincerly,
Thomas
---
inflate: refactor inflate malloc code
Inflate requires some dynamic memory allocation very early in the boot process and this is provided with a set of four functions:
malloc/free/gzip_mark/gzip_release.The old inflate code used a mark/release strategy rather than implement free. This new version instead keeps a count on the number of outstanding allocations and when it hits zero, it resets the malloc arena.
This allows removing all the mark and release implementations and unifying all the malloc/free implementations.
The architecture-dependent code must define two addresses:
-free_mem_ptr, the address of the beginning of the area in which allocations should be made
-free_mem_end_ptr, the address of the end of the area in which allocations should be made. If set to 0, then no check is made on the number of allocations, it just grows as much as neededThe architecture-dependent code can also provide an
arch_decomp_wdog()function call. This function will be called several times during the decompression process, and allow to notify the watchdog that the system is still running. If an architecture provides such a call, then it must defineARCH_HAS_DECOMP_WDOGso that the generic inflate code callsarch_decomp_wdog().Work initially done by Matt Mackall <[email protected]>, updated to a recent version of the kernel and improved by me.
Signed-off-by Thomas Petazzoni <[email protected]>--- arch/alpha/boot/misc.c | 39 +------------------ arch/arm/boot/compressed/misc.c | 59 +++--------------------------- arch/cris/arch-v10/boot/compressed/misc.c | 35 ----------------- arch/cris/arch-v32/boot/compressed/misc.c | 35 ----------------- arch/h8300/boot/compressed/misc.c | 38 ------------------- arch/m32r/boot/compressed/misc.c | 37 ------------------ arch/mn10300/boot/compressed/misc.c | 37 ------------------ arch/sh/boot/compressed/misc_32.c | 38 ------------------- arch/sh/boot/compressed/misc_64.c | 40 -------------------- arch/x86/boot/compressed/misc.c | 39 ------------------- init/do_mounts_rd.c | 25 +----------- init/initramfs.c | 22 +---------- lib/inflate.c | 52 ++++++++++++++++++++++---- 13 files changed, 60 insertions(+), 436 deletions(-)Index:
linuxdev/arch/alpha/boot/misc.c
===================================================================arch/alpha/boot/misc.c +2
-37@@ -78,8 +78,6 @@static int fill_inbuf (void );static void flush_window (void );static void error (char *m); -static void gzip_mark (void **); -static void gzip_release (void **);static char *input_data;static int input_data_size;@@ -88,51 +86,18 @@static ulg output_ptr;static ulg bytes_out; -static void *malloc (int size); -static void free (void *where);static void error (char *m);static void gzip_mark (void **);static void gzip_release (void **);extern int end;static ulg free_mem_ptr; -static ulg free_mem_ptr_end; +static ulg free_mem_end_ptr;#define HEAP_SIZE 0x3000#include "../../../lib/inflate.c" -static void *malloc (int size) -{ -void *p; - -if (size <0 )error ("Malloc error" ); -if (free_mem_ptr <=0 )error ("Memory error" ); - - free_mem_ptr = (free_mem_ptr +3 ) & ~3 ;/* Align */ - - p = (void *)free_mem_ptr; - free_mem_ptr += size; - -if (free_mem_ptr >= free_mem_ptr_end) -error ("Out of memory" ); -return p; -} - -static void free (void *where) -{/* gzip_mark & gzip_release do the free */ -} - -static void gzip_mark (void **ptr) -{ - *ptr = (void *) free_mem_ptr; -} - -static void gzip_release (void **ptr) -{ - free_mem_ptr = (long ) *ptr; -} -/* =========================================================================== * Fill the input buffer. This is called only when the buffer is empty * and at least one byte is really needed. @@ -193,7 +158,7 @@/* FIXME FIXME FIXME */ free_mem_ptr = (ulg )output_start + ksize; - free_mem_ptr_end = (ulg )output_start + ksize +0x200000 ; + free_mem_end_ptr = (ulg )output_start + ksize +0x200000 ;/* FIXME FIXME FIXME */ /* put in temp area to reduce initial footprint */ Index:
linuxdev/arch/arm/boot/compressed/misc.c
===================================================================arch/arm/boot/compressed/misc.c +7
-52@@ -217,8 +217,6 @@static int fill_inbuf (void );static void flush_window (void );static void error (char *m); -static void gzip_mark (void **); -static void gzip_release (void **);extern char input_data[];extern char input_data_end[];@@ -227,64 +225,21 @@static ulg output_ptr;static ulg bytes_out; -static void *malloc (int size); -static void free (void *where);static void error (char *m); -static void gzip_mark (void **); -static void gzip_release (void **);static void putstr (const char *);extern int end;static ulg free_mem_ptr; -static ulg free_mem_ptr_end; +static ulg free_mem_end_ptr; -#define HEAP_SIZE 0x3000 - -#include "../../../../lib/inflate.c" - -#ifndef STANDALONE_DEBUG -static void *malloc (int size) -{ -void *p; - -if (size <0 )error ("Malloc error" ); -if (free_mem_ptr <=0 )error ("Memory error" ); - - free_mem_ptr = (free_mem_ptr +3 ) & ~3 ;/* Align */ - - p = (void *)free_mem_ptr; - free_mem_ptr += size; - -if (free_mem_ptr >= free_mem_ptr_end) -error ("Out of memory" ); -return p; -} - -static void free (void *where) -{/* gzip_mark & gzip_release do the free */ -} - -static void gzip_mark (void **ptr) -{ -arch_decomp_wdog (); - *ptr = (void *) free_mem_ptr; -} +#ifdef STANDALONE_DEBUG +#define NO_INFLATE_MALLOC +#endif -static void gzip_release (void **ptr) -{ -arch_decomp_wdog (); - free_mem_ptr = (long ) *ptr; -} -#else -static void gzip_mark (void **ptr) -{ -} +#define ARCH_HAS_DECOMP_WDOG -static void gzip_release (void **ptr) -{ -} -#endif +#include "../../../../lib/inflate.c" /* =========================================================================== * Fill the input buffer. This is called only when the buffer is empty @@ -348,7 +303,7 @@ { output_data = (uch *)output_start;/* Points to kernel start */ free_mem_ptr = free_mem_ptr_p; - free_mem_ptr_end = free_mem_ptr_end_p; + free_mem_end_ptr = free_mem_ptr_end_p; __machine_arch_type = arch_id;arch_decomp_setup ();Index:
linuxdev/arch/cris/arch-v10/boot/compressed/misc.c
===================================================================arch/cris/arch-v10/boot/compressed/misc.c +1
-34@@ -84,8 +84,6 @@static int fill_inbuf (void );static void flush_window (void );static void error (char *m); -static void gzip_mark (void **); -static void gzip_release (void **);extern char *input_data;/* lives in head.S */ @@ -93,11 +91,7 @@static uch *output_data;static unsigned long output_ptr =0 ; -static void *malloc (int size); -static void free (void *where);static void error (char *m); -static void gzip_mark (void **); -static void gzip_release (void **);static void puts (const char *);@@ -105,37 +99,10 @@extern int end;static long free_mem_ptr = (long )&end; +static long free_mem_end_ptr =0 ;#include "../../../../../lib/inflate.c" -static void *malloc (int size) -{ -void *p; - -if (size <0 )error ("Malloc error" ); - - free_mem_ptr = (free_mem_ptr +3 ) & ~3 ;/* Align */ - - p = (void *)free_mem_ptr; - free_mem_ptr += size; - -return p; -} - -static void free (void *where) -{/* Don't care */ -} - -static void gzip_mark (void **ptr) -{ - *ptr = (void *) free_mem_ptr; -} - -static void gzip_release (void **ptr) -{ - free_mem_ptr = (long ) *ptr; -} -/* decompressor info and error messages to serial console */ static voidIndex:
linuxdev/arch/cris/arch-v32/boot/compressed/misc.c
===================================================================arch/cris/arch-v32/boot/compressed/misc.c +1
-34@@ -89,8 +89,6 @@static void flush_window (void );static void error (char *m); -static void gzip_mark (void **); -static void gzip_release (void **);extern char *input_data;/* lives in head.S */ @@ -98,11 +96,7 @@static uch *output_data;static unsigned long output_ptr =0 ; -static void *malloc (int size); -static void free (void *where);static void error (char *m); -static void gzip_mark (void **); -static void gzip_release (void **);static void puts (const char *);@@ -110,37 +104,10 @@extern int _end;static long free_mem_ptr = (long )&_end; +static long free_mem_end_ptr =0 ;#include "../../../../../lib/inflate.c" -static void *malloc (int size) -{ -void *p; - -if (size <0 )error ("Malloc error" ); - - free_mem_ptr = (free_mem_ptr +3 ) & ~3 ;/* Align */ - - p = (void *)free_mem_ptr; - free_mem_ptr += size; - -return p; -} - -static void free (void *where) -{/* Don't care */ -} - -static void gzip_mark (void **ptr) -{ - *ptr = (void *) free_mem_ptr; -} - -static void gzip_release (void **ptr) -{ - free_mem_ptr = (long ) *ptr; -} -/* decompressor info and error messages to serial console */ static inline voidIndex:
linuxdev/arch/h8300/boot/compressed/misc.c
===================================================================arch/h8300/boot/compressed/misc.c +0
-38@@ -67,8 +67,6 @@static int fill_inbuf (void );static void flush_window (void );static void error (char *m); -static void gzip_mark (void **); -static void gzip_release (void **);extern char input_data[];extern int input_len;@@ -77,11 +75,7 @@static uch *output_data;static unsigned long output_ptr =0 ; -static void *malloc (int size); -static void free (void *where);static void error (char *m); -static void gzip_mark (void **); -static void gzip_release (void **);int puts (const char *);@@ -98,38 +92,6 @@#define TDR *((volatile unsigned char *)0xffff8b)#define SSR *((volatile unsigned char *)0xffff8c) -static void *malloc (int size) -{ -void *p; - -if (size <0 )error ("Malloc error" ); -if (free_mem_ptr ==0 )error ("Memory error" ); - - free_mem_ptr = (free_mem_ptr +3 ) & ~3 ;/* Align */ - - p = (void *)free_mem_ptr; - free_mem_ptr += size; - -if (free_mem_ptr >= free_mem_end_ptr) -error ("Out of memory" ); - -return p; -} - -static void free (void *where) -{/* Don't care */ -} - -static void gzip_mark (void **ptr) -{ - *ptr = (void *) free_mem_ptr; -} - -static void gzip_release (void **ptr) -{ - free_mem_ptr = (long ) *ptr; -} -int puts (const char *s) {return 0 ;Index:
linuxdev/arch/m32r/boot/compressed/misc.c
===================================================================arch/m32r/boot/compressed/misc.c +0
-37@@ -70,8 +70,6 @@static int fill_inbuf (void );static void flush_window (void );static void error (char *m); -static void gzip_mark (void **); -static void gzip_release (void **);static unsigned char *input_data;static int input_len;@@ -82,9 +80,6 @@#include "m32r_sio.c" -static void *malloc (int size); -static void free (void *where); -static unsigned long free_mem_ptr;static unsigned long free_mem_end_ptr;@@ -92,38 +87,6 @@#include "../../../../lib/inflate.c" -static void *malloc (int size) -{ -void *p; - -if (size <0 )error ("Malloc error" ); -if (free_mem_ptr ==0 )error ("Memory error" ); - - free_mem_ptr = (free_mem_ptr +3 ) & ~3 ;/* Align */ - - p = (void *)free_mem_ptr; - free_mem_ptr += size; - -if (free_mem_ptr >= free_mem_end_ptr) -error ("Out of memory" ); - -return p; -} - -static void free (void *where) -{/* Don't care */ -} - -static void gzip_mark (void **ptr) -{ - *ptr = (void *) free_mem_ptr; -} - -static void gzip_release (void **ptr) -{ - free_mem_ptr = (long ) *ptr; -} -void *memset (void * s,int c,size_t n) {int i;Index:
linuxdev/arch/mn10300/boot/compressed/misc.c
===================================================================arch/mn10300/boot/compressed/misc.c +0
-37@@ -153,26 +153,9 @@static unsigned long output_ptr; -static void *malloc (int size); - -static inline void free (void *where) -{/* Don't care */ -} -static unsigned long free_mem_ptr = (unsigned long ) &end;static unsigned long free_mem_end_ptr = (unsigned long ) &end +0x90000 ; -static inline void gzip_mark (void **ptr) -{ -kputs ("." ); - *ptr = (void *) free_mem_ptr; -} - -static inline void gzip_release (void **ptr) -{ - free_mem_ptr = (unsigned long ) *ptr; -} -#define INPLACE_MOVE_ROUTINE 0x1000#define LOW_BUFFER_START 0x2000#define LOW_BUFFER_END 0x90000@@ -186,26 +169,6 @@#include "../../../../lib/inflate.c" -static void *malloc (int size) -{ -void *p; - -if (size <0 ) -error ("Malloc error\n" ); -if (!free_mem_ptr) -error ("Memory error\n" ); - - free_mem_ptr = (free_mem_ptr +3 ) & ~3 ;/* Align */ - - p = (void *) free_mem_ptr; - free_mem_ptr += size; - -if (free_mem_ptr >= free_mem_end_ptr) -error ("\nOut of memory\n" ); - -return p; -} -static inline void scroll (void ) {int i;Index:
linuxdev/arch/sh/boot/compressed/misc_32.c
===================================================================arch/sh/boot/compressed/misc_32.c +0
-38@@ -74,8 +74,6 @@static int fill_inbuf (void );static void flush_window (void );static void error (char *m); -static void gzip_mark (void **); -static void gzip_release (void **);extern char input_data[];extern int input_len;@@ -84,11 +82,7 @@static uch *output_data;static unsigned long output_ptr =0 ; -static void *malloc (int size); -static void free (void *where);static void error (char *m); -static void gzip_mark (void **); -static void gzip_release (void **);int puts (const char *);@@ -101,38 +95,6 @@#include "../../../../lib/inflate.c" -static void *malloc (int size) -{ -void *p; - -if (size <0 )error ("Malloc error" ); -if (free_mem_ptr ==0 )error ("Memory error" ); - - free_mem_ptr = (free_mem_ptr +3 ) & ~3 ;/* Align */ - - p = (void *)free_mem_ptr; - free_mem_ptr += size; - -if (free_mem_ptr >= free_mem_end_ptr) -error ("Out of memory" ); - -return p; -} - -static void free (void *where) -{/* Don't care */ -} - -static void gzip_mark (void **ptr) -{ - *ptr = (void *) free_mem_ptr; -} - -static void gzip_release (void **ptr) -{ - free_mem_ptr = (long ) *ptr; -} -#ifdef CONFIG_SH_STANDARD_BIOS size_t strlen (const char *s) {Index:
linuxdev/arch/sh/boot/compressed/misc_64.c
===================================================================arch/sh/boot/compressed/misc_64.c +0
-40@@ -72,8 +72,6 @@static int fill_inbuf (void );static void flush_window (void );static void error (char *m); -static void gzip_mark (void **); -static void gzip_release (void **);extern char input_data[];extern int input_len;@@ -82,11 +80,7 @@static uch *output_data;static unsigned long output_ptr =0 ; -static void *malloc (int size); -static void free (void *where);static void error (char *m); -static void gzip_mark (void **); -static void gzip_release (void **);static void puts (const char *);@@ -99,40 +93,6 @@#include "../../../../lib/inflate.c" -static void *malloc (int size) -{ -void *p; - -if (size <0 ) -error ("Malloc error\n" ); -if (free_mem_ptr ==0 ) -error ("Memory error\n" ); - - free_mem_ptr = (free_mem_ptr +3 ) & ~3 ;/* Align */ - - p = (void *) free_mem_ptr; - free_mem_ptr += size; - -if (free_mem_ptr >= free_mem_end_ptr) -error ("\nOut of memory\n" ); - -return p; -} - -static void free (void *where) -{/* Don't care */ -} - -static void gzip_mark (void **ptr) -{ - *ptr = (void *) free_mem_ptr; -} - -static void gzip_release (void **ptr) -{ - free_mem_ptr = (long ) *ptr; -} -void puts (const char *s) { }Index:
linuxdev/arch/x86/boot/compressed/misc.c
===================================================================arch/x86/boot/compressed/misc.c +0
-39@@ -181,8 +181,6 @@static int fill_inbuf (void );static void flush_window (void );static void error (char *m); -static void gzip_mark (void **); -static void gzip_release (void **);/* * This is set up by the setup-routine at boot-time @@ -200,9 +198,6 @@static long bytes_out; -static void *malloc (int size); -static void free (void *where); -static void *memset (void *s,int c,unsigned n);static void *memcpy (void *dest,const void *src,unsigned n);@@ -227,40 +222,6 @@#include "../../../../lib/inflate.c" -static void *malloc (int size) -{ -void *p; - -if (size <0 ) -error ("Malloc error" ); -if (free_mem_ptr <=0 ) -error ("Memory error" ); - - free_mem_ptr = (free_mem_ptr +3 ) & ~3 ;/* Align */ - - p = (void *)free_mem_ptr; - free_mem_ptr += size; - -if (free_mem_ptr >= free_mem_end_ptr) -error ("Out of memory" ); - -return p; -} - -static void free (void *where) -{/* Don't care */ -} - -static void gzip_mark (void **ptr) -{ - *ptr = (void *) free_mem_ptr; -} - -static void gzip_release (void **ptr) -{ - free_mem_ptr = (memptr) *ptr; -} -static void scroll (void ) {int i;Index:
linuxdev/init/do_mounts_rd.c
===================================================================init/do_mounts_rd.c +2
-23@@ -313,32 +313,11 @@static int __init fill_inbuf (void );static void __init flush_window (void ); -static void __init *malloc (size_t size); -static void __init free (void *where);static void __init error (char *m); -static void __init gzip_mark (void **); -static void __init gzip_release (void **); -#include "../lib/inflate.c" - -static void __init *malloc (size_t size) -{ -return kmalloc (size,GFP_KERNEL ); -} - -static void __init free (void *where) -{ -kfree (where); -} - -static void __init gzip_mark (void **ptr) -{ -} - -static void __init gzip_release (void **ptr) -{ -} +#define NO_INFLATE_MALLOC +#include "../lib/inflate.c" /* =========================================================================== * Fill the input buffer. This is called only when the buffer is empty Index:
linuxdev/init/initramfs.c
===================================================================init/initramfs.c +2
-20@@ -14,16 +14,6 @@ message = x; } -static void __init *malloc (size_t size) -{ -return kmalloc (size,GFP_KERNEL ); -} - -static void __init free (void *where) -{ -kfree (where); -} -/* link hash */ #define N_ALIGN (len) ((((len) + 1) & ~3) + 2)@@ -407,18 +397,10 @@static void __init flush_window (void );static void __init error (char *m); -static void __init gzip_mark (void **); -static void __init gzip_release (void **); -#include "../lib/inflate.c" +#define NO_INFLATE_MALLOC -static void __init gzip_mark (void **ptr) -{ -} - -static void __init gzip_release (void **ptr) -{ -} +#include "../lib/inflate.c" /* =========================================================================== * Write the output window window[0..outcnt-1] and update crc and bytes_out. Index:
linuxdev/lib/inflate.c
===================================================================lib/inflate.c +45
-7@@ -230,6 +230,45 @@#define NEEDBITS (n) {while(k<(n)){b|=((ulg)NEXTBYTE())<<k;k+=8;}}#define DUMPBITS (n) {b>>=(n);k-=(n);} +#ifndef NO_INFLATE_MALLOC +/* A trivial malloc implementation, adapted from +* malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994 +*/ + +static unsigned long malloc_ptr; +static int malloc_count; + +static void *malloc (int size) +{ +void *p; + +if (size <0 ) +error ("Malloc error" ); +if (!malloc_ptr) + malloc_ptr = free_mem_ptr; + + malloc_ptr = (malloc_ptr +3 ) & ~3 ;/* Align */ + + p = (void *)malloc_ptr; + malloc_ptr += size; + +if (free_mem_end_ptr && malloc_ptr >= free_mem_end_ptr) +error ("Out of memory" ); + + malloc_count++; +return p; +} + +static void free (void *where) +{ + malloc_count--; +if (!malloc_count) + malloc_ptr = free_mem_ptr; +} +#else +#define malloc (a) kmalloc(a, GFP_KERNEL) +#define free (a) kfree(a) +#endif /* Huffman code decoding is performed using a multi-level table lookup. @@ -1045,7 +1084,6 @@int e;/* last block flag */ int r;/* result code */ unsigned h;/* maximum struct huft's malloc'ed */ -void *ptr;/* initialize window, bit buffer */ wp =0 ;@@ -1057,12 +1095,12 @@ h =0 ;do { hufts =0 ; -gzip_mark (&ptr); -if ((r =inflate_block (&e)) !=0 ) { -gzip_release (&ptr); -return r; - } -gzip_release (&ptr); +#ifdef ARCH_HAS_DECOMP_WDOG +arch_decomp_wdog (); +#endif + r =inflate_block (&e); +if (r) +return r;if (hufts > h) h = hufts; }while (!e);Signature · 10 lines
-- Thomas Petazzoni, Free Electrons Kernel, drivers and embedded Linux development, consulting, training and support. http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Signature · 2 lines
Yoshinori Sato <[email protected]>