OMAP3 camera driver V4L2 CCP2
PATCH 2/16 OMAP3 camera driver V4L2 CCP2
From: Sameer Venkatraman <[email protected]>
V4L2: Adding Compact Camera Port definitions.
Adding Compact Camera Port (CCP) 2 class structures.
Signed-off-by Sameer Venkatraman <[email protected]>
Signed-off-by Mohit Jalori <[email protected]>
--- v4l2-int-device.h | 101 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 101 insertions(+)
include/media/v4l2-int-device.h +101 -0
@@ -103,6 +103,11 @@ enum v4l2_if_type {* on certain image sensors. */ V4L2_IF_TYPE_BT656 , +/* +* Compact Camera Port (CCP) 2. CCP 2 class 0 is also known as +* Camera Serial Interface (CSI) 1. +*/ + V4L2_IF_TYPE_CCP2, }; enum v4l2_if_type_bt656_mode {
@@ -149,10 +154,106 @@ struct v4l2_if_type_bt656 {u32 clock_curr; }; +enum v4l2_if_type_ccp2_mode { +V4L2_IF_TYPE_CCP2_MODE_SERIAL =0 , +V4L2_IF_TYPE_CCP2_MODE_PARALLEL +}; + +enum v4l2_if_type_ccp2_edge { +V4L2_IF_TYPE_CCP2_EDGE_RISING =0 , +V4L2_IF_TYPE_CCP2_EDGE_FALLING +}; + +enum v4l2_if_type_ccp2_signalling { +V4L2_IF_TYPE_CCP2_SIGNALLING_DATA_CLOCK =0 , +V4L2_IF_TYPE_CCP2_SIGNALLING_DATA_STROBE +}; + +struct v4l2_if_type_ccp2 { +/* +* CCP 2 class: +* +* 0: CCP 2 class 0 or CSI 1 +* 1: CCP 2 class 1 or 2 +* +* These restrictions apply to CCP 2 class 0 / CSI 1: +* +* - Data / strobe signaling may not be used. +* +* - CRC may not be used. +* +* - The only logical channel which can be used is 0. +* +* - RAW6 and RAW7 data types may not be used. +* +* - DPCM (de)compression may not be used. +*/ +unsigned class:1 ; +/* +* 0: don't use crc +* 1: use crc +*/ +unsigned crc:1 ; +/* +* 0: serial mode +* 1: parallel mode +*/ +unsigned mode:1 ; +/* +* 0: output changes on clock rising edge +* 1: output changes on clock falling edge +* +* Sampling must be done on opposite edge. +* +* FIXME: Does this affect data / strobe signalling?? +*/ +unsigned edge:1 ; +/* +* 0: data / clock signalling +* 1: data / strobe signalling +*/ +unsigned signalling:1 ; +/* +* 0: strobe / clock signal not inverted +* 1: strobe / clock signal inverted +*/ +unsigned strobe_clock_inv:1 ; +/* +* Vertical sync edge at beginning of image data. +* +* 0: rising +* 1: falling +*/ +unsigned vs_edge:1 ; +/* Logical channel number; 0--7. */ +unsigned channel:3 ; +/* V4L2_PIX_FMT_... */ +u32 format; +/* Number of empty scanlines in the beginning of the frame. */ +unsigned data_start:14 ; +/* +* Number of scanlines of real pixel data, i.e. you'll, in the +* end, get this many scanlines to your image. +*/ +unsigned data_size:14 ; +/* In Hz. */ +u32 clock_min; +u32 clock_max; +/* Desired external clock rate. */ +u32 clock_curr; +}; + +enum v4l2_if_soc_cap { +V4L2_IF_CAP_RAW , +V4L2_IF_CAP_SOC +}; +struct v4l2_ifparm { +enum v4l2_if_soc_cap capability;enum v4l2_if_type if_type;union {struct v4l2_if_type_bt656 bt656; +struct v4l2_if_type_ccp2 ccp2; } u; };
--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list