Skip to contentSkip to conversation

lapic calibration results fix

RFC In review Cyrill Gorcunov 1 participant 2 messages Jul 13, 2008 x86

lore
Share & tools
lore
#0 lore raw

RFC 1/1 lapic calibration results fix

Ingo, Maciej,

it seems I found a bit strange code snippet in apic_32.c:setup_boot_APIC_clock. We set local_apic_timer_verify_ok = 1 before checking the results. I think the following patch make sense. Please take a look on.

---
We set lapic flag that clocksource calibration is
fine too early. Fix it.

---

arch/x86/kernel/apic_32.c +2 -2
Index: linux-2.6.git/arch/x86/kernel/apic_32.c
===================================================================
@@ -489,8 +489,6 @@ void __init setup_boot_APIC_clock(void)
 		    calibration_result / (1000000 / HZ),
 		    calibration_result % (1000000 / HZ));
 
-	local_apic_timer_verify_ok = 1;
-
 	/*
 	 * Do a sanity check on the APIC calibration result
 	 */
@@ -504,6 +502,8 @@ void __init setup_boot_APIC_clock(void)
 		return;
 	}
 
+	local_apic_timer_verify_ok = 1;
+
 	/* We trust the pm timer based calibration */
 	if (!pm_referenced) {
 		apic_printk(APIC_VERBOSE, "... verify APIC timer\n");
#1 lore raw

[Cyrill Gorcunov - Sun, Jul 13, 2008 at 03:37:34PM +0400]

| Ingo, Maciej,
| 
| it seems I found a bit strange code snippet in apic_32.c:setup_boot_APIC_clock.
| We set local_apic_timer_verify_ok = 1 before checking the results. I think
| the following patch make sense. Please take a look on.
| 
| ---
| We set lapic flag that clocksource calibration is
| fine too early. Fix it.
| 
| Signed-off-by: Cyrill Gorcunov <[email protected]>
| ---
| 
| Index: linux-2.6.git/arch/x86/kernel/apic_32.c
| ===================================================================
| --- linux-2.6.git.orig/arch/x86/kernel/apic_32.c	2008-07-13 15:25:20.000000000 +0400
| +++ linux-2.6.git/arch/x86/kernel/apic_32.c	2008-07-13 15:31:03.000000000 +0400
| @@ -489,8 +489,6 @@ void __init setup_boot_APIC_clock(void)
|  		    calibration_result / (1000000 / HZ),
|  		    calibration_result % (1000000 / HZ));
|  
| -	local_apic_timer_verify_ok = 1;
| -
|  	/*
|  	 * Do a sanity check on the APIC calibration result
|  	 */
| @@ -504,6 +502,8 @@ void __init setup_boot_APIC_clock(void)
|  		return;
|  	}
|  
| +	local_apic_timer_verify_ok = 1;
| +
|  	/* We trust the pm timer based calibration */
|  	if (!pm_referenced) {
|  		apic_printk(APIC_VERBOSE, "... verify APIC timer\n");

Letme clarify a bit situation why I propose this path (it's not that clear from its description).

While calibrating apic timer we use different 'flags' signaling if it was success/fail. On 64bit platform lapic_timer_setup() does check for CLOCK_EVT_FEAT_DUMMY bit which is set by default and cleared on successfully calibrated timer. So 64bit is fine now. On 32bit we use a different approach - local_apic_timer_verify_ok flag _BUT_ as I see it being set too early _before_ calibration result is checked so we could have the following - kernel reports user that APIC timer is too slow and disabled but local_apic_timer_verify_ok remains set to 1 instead of 0.

- Cyrill -