booting 2.6 on edosk7760
(Adding the mailing list to Cc, don't send me these things off-list..)
Quoted 9 lines · Luca Santini
i'm trying to boot the sh branch of 2.6.26 kernel on an edosk7760. keeping it unchanged and configuring for sh7760 the only thing i have is a whitespace (' '<cursor>) .
So i tried to port the board specific configuration, following your new_machine.txt and copying things from
arch/sh/edosk7760i found on my original 2.4.21 kernel....
..but the result is the same.....
Quoted 8 lines
where can i start the debugging?
what's the early stages execution flow of the 2.6 kernel? (isarch/sh/compressed/boot/head_32.Sthe first one executed?)
when <at what point of execution> can i see the first output on the console?thanks a lot for all the answers...
Luca Santini
It's fairly uncommon to have any problems in the decompression code, so your best bet is probably to start looking at arch/sh/kernel/head_32.S, arch/sh/kernel/cpu/init.c, and arch/sh/kernel/setup.c. If your board is using sh-ipl+g you can trivially use the early printk with that, otherwise you will need to see about getting the early SCIF console working on your particular platform. You can grep for earlyprintk in arch/sh/configs to get an idea of usage.