x86,pci: dmi check for mackpro 2.2 mmconf

change the mconf bus range from [0,0xff] to to [0, 0x3f] to match range [0xf0000000, 0xf4000000) in e820 tables.

---
 arch/x86/pci/mmconfig-shared.c |   35 +++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

Index: linux-2.6/arch/x86/pci/mmconfig-shared.c
===================================================================
@@ -374,6 +374,40 @@ reject:
 
 static int __initdata known_bridge;
 
+static int __devinit check_mmconf(const struct dmi_system_id *d)
+{
+	typeof(pci_mmcfg_config[0]) *cfg;
+
+	if ((pci_mmcfg_config_num != 1) ||
+	    (pci_mmcfg_config == NULL) ||
+	    (pci_mmcfg_config[0].address == 0))
+		return 1;
+
+	cfg = &pci_mmcfg_config[0];
+
+	if (cfg->start_bus_number == 0 && cfg->end_bus_number > 0x3f)
+		cfg->end_bus_number = 0x3f;
+
+	return 0;
+}
+
+static struct dmi_system_id __devinitdata mmconf_dmi_table[] = {
+	{
+		.callback = check_mmconf,
+		.ident = "Apple",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro2"),
+		},
+	},
+	{}
+};
+
+void __init check_mmconf_dmi(void)
+{
+        dmi_check_system(mmconf_dmi_table);
+}
+
 static void __init __pci_mmcfg_init(int early)
 {
 	/* MMCONFIG disabled */

@@ -395,6 +429,7 @@ static void __init __pci_mmcfg_init(int
 
 	if (!known_bridge) {
 		acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg);
+		check_mmconf_dmi();
 		pci_mmcfg_reject_broken(early);
 	}
 

YH,
Just filed a radar bug report with Apple as ID 6086072 entitled
"BIOS in MacBook Pro 1.5.1 update is buggy - reports too many buses". Pointed them to the thread here and the messages with the patch, the earlydump and 'lspci --vvxxxx' logs.
Jack

Why is this hard-coded instead of discovered dynamically?

-hpa

you mean according to the range reserved in e820 to find out bus range that should be used for mmconf?

YH

That would make sense, since you're truncating the mmconf range based on some arbitrary limit. Even better would be to query the hardware register which is responsible for the truncation.

-hpa

OK

will rework pci_mmcfg_reject_broken to
reduce size and check with is_acpi_reserved/e820_mapped to update end_bus_number

YH

should we apply your current patch (because that is what got tested by Jack), with a followup patch - or would you like to send a new patch from scratch?

Ingo

will send one new patch replace this in seconds.

YH

great find!

If you can think of further debug mechanisms in the kernel to make the fixing of similar problems easier, feel free ... The easier it is for users to track down such problems the better for Linux in general.

Ingo

for MacBookPro2

change the mconf bus range from [0,0xff] to to [0, 0x3f] to match range [0xf0000000, 0xf4000000) in e820 tables.

---
 arch/x86/pci/mmconfig-shared.c |   64 ++++++++++++++++++++++++++++++-----------
 1 file changed, 47 insertions(+), 17 deletions(-)

Index: linux-2.6/arch/x86/pci/mmconfig-shared.c
===================================================================
@@ -293,7 +293,7 @@ static acpi_status __init find_mboard_re
 	return AE_OK;
 }
 
-static int __init is_acpi_reserved(unsigned long start, unsigned long end)
+static int __init is_acpi_reserved(u64 start, u64 end, unsigned not_used)
 {
 	struct resource mcfg_res;
 

@@ -310,6 +310,41 @@ static int __init is_acpi_reserved(unsig
 	return mcfg_res.flags;
 }
 
+typedef int (*check_reserved_t)(u64 start, u64 end, unsigned type);
+
+static int __init is_mmconf_reserved(check_reserved_t is_reserved,
+		u64 addr, u64 size, int i,
+	        typeof(pci_mmcfg_config[0]) *cfg, int with_e820)
+{
+	u64 old_size = size;
+	int valid = 0;
+
+	while (!is_reserved(addr, addr + size - 1, E820_RESERVED)) {
+		size >>= 1;
+		if (size < (16UL<<20))
+			break;
+	}
+
+	if (size >= (16UL<<20) || size == old_size) {
+		printk(KERN_NOTICE
+		       "PCI: MCFG area at %Lx reserved in %s\n",
+			addr, with_e820?"E820":"ACPI motherboard resources");
+		valid = 1;
+
+		if (old_size != size) {
+			/* update end_bus_number */
+			cfg->end_bus_number = cfg->start_bus_number + ((size>>20) - 1);
+			printk(KERN_NOTICE "PCI: updated MCFG configuration %d: base %lx "
+			       "segment %hu buses %u - %u\n",
+			       i, (unsigned long)cfg->address, cfg->pci_segment,
+			       (unsigned int)cfg->start_bus_number,
+			       (unsigned int)cfg->end_bus_number);
+		}
+	}
+
+	return valid;
+}
+
 static void __init pci_mmcfg_reject_broken(int early)
 {
 	typeof(pci_mmcfg_config[0]) *cfg;

@@ -324,21 +359,21 @@ static void __init pci_mmcfg_reject_brok
 
 	for (i = 0; i < pci_mmcfg_config_num; i++) {
 		int valid = 0;
-		u32 size = (cfg->end_bus_number + 1) << 20;
+		u64 addr, size;
+
 		cfg = &pci_mmcfg_config[i];
+		addr = cfg->start_bus_number;
+		addr <<= 20;
+		size = cfg->end_bus_number + 1 - cfg->start_bus_number;
+		size <<= 20;
 		printk(KERN_NOTICE "PCI: MCFG configuration %d: base %lx "
 		       "segment %hu buses %u - %u\n",
 		       i, (unsigned long)cfg->address, cfg->pci_segment,
 		       (unsigned int)cfg->start_bus_number,
 		       (unsigned int)cfg->end_bus_number);
 
-		if (!early &&
-		    is_acpi_reserved(cfg->address, cfg->address + size - 1)) {
-			printk(KERN_NOTICE "PCI: MCFG area at %Lx reserved "
-			       "in ACPI motherboard resources\n",
-			       cfg->address);
-			valid = 1;
-		}
+		if (!early)
+			valid = is_mmconf_reserved(is_acpi_reserved, addr, size, i, cfg, 0);
 
 		if (valid)
 			continue;

@@ -347,16 +382,11 @@ static void __init pci_mmcfg_reject_brok
 			printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %Lx is not"
 			       " reserved in ACPI motherboard resources\n",
 			       cfg->address);
+
 		/* Don't try to do this check unless configuration
 		   type 1 is available. how about type 2 ?*/
-		if (raw_pci_ops && e820_all_mapped(cfg->address,
-						  cfg->address + size - 1,
-						  E820_RESERVED)) {
-			printk(KERN_NOTICE
-			       "PCI: MCFG area at %Lx reserved in E820\n",
-			       cfg->address);
-			valid = 1;
-		}
+		if (raw_pci_ops)
+			valid = is_mmconf_reserved(e820_all_mapped, addr, size, i, cfg, 1);
 
 		if (!valid)
 			goto reject;

[PATCH] x86,pci: detect end_bus_number according to acpi/e820 reserved is more smart to address hpa's request.

YH

pushed the commit below into tip/pci-for-jesse.

Jack, could you check whether the end result in tip/master boots fine on your 3GB MacBook by default:

http://people.redhat.com/mingo/x86.git/README

... and let us know if there are any other problems/weirdnesses.

Ingo

git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git pci-for-jesse

------------------------->
commit 473e6a3881ed2b5903252cb6a759d55aecff8611

Author: Yinghai Lu <[email protected]>
Date:   Fri Jul 18 13:22:36 2008 -0700

x86, pci: detect end_bus_number according to acpi/e820 reserved

Jack Howarth reported that 2.6.26-rc9-git9 doesn't boot on MacBookPro2.

the reason is a faulty BIOS update that reportes faulty resources.

Nevertheless it's possible for Linux to be more resolent about this situation (and similar situations) and work around this bug, by cross-checking the mmconf range against the e820 table and ACPI resources.

Change the mconf bus range from [0,0xff] to to [0, 0x3f] to match range [0xf0000000, 0xf4000000) in e820 tables.

---
 arch/x86/pci/mmconfig-shared.c |   64 +++++++++++++++++++++++++++++----------
 1 files changed, 47 insertions(+), 17 deletions(-)

index 23faaa8..9297882 100644
@@ -293,7 +293,7 @@ static acpi_status __init find_mboard_resource(acpi_handle handle, u32 lvl,
 	return AE_OK;
 }
 
-static int __init is_acpi_reserved(unsigned long start, unsigned long end)
+static int __init is_acpi_reserved(u64 start, u64 end, unsigned not_used)
 {
 	struct resource mcfg_res;
 

@@ -310,6 +310,41 @@ static int __init is_acpi_reserved(unsigned long start, unsigned long end)
 	return mcfg_res.flags;
 }
 
+typedef int (*check_reserved_t)(u64 start, u64 end, unsigned type);
+
+static int __init is_mmconf_reserved(check_reserved_t is_reserved,
+		u64 addr, u64 size, int i,
+		typeof(pci_mmcfg_config[0]) *cfg, int with_e820)
+{
+	u64 old_size = size;
+	int valid = 0;
+
+	while (!is_reserved(addr, addr + size - 1, E820_RESERVED)) {
+		size >>= 1;
+		if (size < (16UL<<20))
+			break;
+	}
+
+	if (size >= (16UL<<20) || size == old_size) {
+		printk(KERN_NOTICE
+		       "PCI: MCFG area at %Lx reserved in %s\n",
+			addr, with_e820?"E820":"ACPI motherboard resources");
+		valid = 1;
+
+		if (old_size != size) {
+			/* update end_bus_number */
+			cfg->end_bus_number = cfg->start_bus_number + ((size>>20) - 1);
+			printk(KERN_NOTICE "PCI: updated MCFG configuration %d: base %lx "
+			       "segment %hu buses %u - %u\n",
+			       i, (unsigned long)cfg->address, cfg->pci_segment,
+			       (unsigned int)cfg->start_bus_number,
+			       (unsigned int)cfg->end_bus_number);
+		}
+	}
+
+	return valid;
+}
+
 static void __init pci_mmcfg_reject_broken(int early)
 {
 	typeof(pci_mmcfg_config[0]) *cfg;

@@ -324,21 +359,21 @@ static void __init pci_mmcfg_reject_broken(int early)
 
 	for (i = 0; i < pci_mmcfg_config_num; i++) {
 		int valid = 0;
-		u32 size = (cfg->end_bus_number + 1) << 20;
+		u64 addr, size;
+
 		cfg = &pci_mmcfg_config[i];
+		addr = cfg->start_bus_number;
+		addr <<= 20;
+		size = cfg->end_bus_number + 1 - cfg->start_bus_number;
+		size <<= 20;
 		printk(KERN_NOTICE "PCI: MCFG configuration %d: base %lx "
 		       "segment %hu buses %u - %u\n",
 		       i, (unsigned long)cfg->address, cfg->pci_segment,
 		       (unsigned int)cfg->start_bus_number,
 		       (unsigned int)cfg->end_bus_number);
 
-		if (!early &&
-		    is_acpi_reserved(cfg->address, cfg->address + size - 1)) {
-			printk(KERN_NOTICE "PCI: MCFG area at %Lx reserved "
-			       "in ACPI motherboard resources\n",
-			       cfg->address);
-			valid = 1;
-		}
+		if (!early)
+			valid = is_mmconf_reserved(is_acpi_reserved, addr, size, i, cfg, 0);
 
 		if (valid)
 			continue;

@@ -347,16 +382,11 @@ static void __init pci_mmcfg_reject_broken(int early)
 			printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %Lx is not"
 			       " reserved in ACPI motherboard resources\n",
 			       cfg->address);
+
 		/* Don't try to do this check unless configuration
 		   type 1 is available. how about type 2 ?*/
-		if (raw_pci_ops && e820_all_mapped(cfg->address,
-						  cfg->address + size - 1,
-						  E820_RESERVED)) {
-			printk(KERN_NOTICE
-			       "PCI: MCFG area at %Lx reserved in E820\n",
-			       cfg->address);
-			valid = 1;
-		}
+		if (raw_pci_ops)
+			valid = is_mmconf_reserved(e820_all_mapped, addr, size, i, cfg, 1);
 
 		if (!valid)
 			goto reject;

YH,
I'll test the new patch shortly. When I do, I'll put back in
your debug patches to try to get a complete log with pci=verbose and initcall_debug with PCIEASPM disabled. Hopefully the probing is done in the same general fashion with and without PCIEASPM so we can deduce what exactly is being probed when my MacBook Pro freezes during boot with PCIEASPM enabled. I consider the fact that booting 2.6.26 always freezes the kernel when PCIEASPM is enabled to be the more serious bug (since once Fedora ships 2.6.26 kernels I'll be stuck always building my own).
Jack

tip tree has the two debug patches.

another laptop : Acer ... suffer this problem too with ASPM...

YH

Yeah, looks like we'll have to be more conservative about enabling ASPM. Maybe a whitelist approach would be better...

Jesse

YH,
The patch you posted did not apply cleanly to tonight's or last night's linus kernel git.
I had to correct it by hand and this is what I applied...

@@ -293,7 +293,7 @@
 	return AE_OK;
 }
 
-static int __init is_acpi_reserved(unsigned long start, unsigned long end)
+static int __init is_acpi_reserved(u64 start, u64 end, unsigned not_used)
 {
 	struct resource mcfg_res;
 

@@ -310,6 +310,41 @@
 	return mcfg_res.flags;
 }
 
+typedef int (*check_reserved_t)(u64 start, u64 end, unsigned type);
+
+static int __init is_mmconf_reserved(check_reserved_t is_reserved,
+               u64 addr, u64 size, int i,
+               typeof(pci_mmcfg_config[0]) *cfg, int with_e820)
+{
+       u64 old_size = size;
+       int valid = 0;
+
+       while (!is_reserved(addr, addr + size - 1, E820_RESERVED)) {
+               size >>= 1;
+               if (size < (16UL<<20))
+                       break;
+       }
+
+       if (size >= (16UL<<20) || size == old_size) {
+               printk(KERN_NOTICE
+                      "PCI: MCFG area at %Lx reserved in %s\n",
+                       addr, with_e820?"E820":"ACPI motherboard resources");
+               valid = 1;
+
+               if (old_size != size) {
+                       /* update end_bus_number */
+                       cfg->end_bus_number = cfg->start_bus_number + ((size>>20) - 1);
+                       printk(KERN_NOTICE "PCI: updated MCFG configuration %d: base %lx "
+                              "segment %hu buses %u - %u\n",
+                              i, (unsigned long)cfg->address, cfg->pci_segment,
+                              (unsigned int)cfg->start_bus_number,
+                              (unsigned int)cfg->end_bus_number);
+               }
+       }
+
+       return valid;
+}
+
 static void __init pci_mmcfg_reject_broken(int early)
 {
 	typeof(pci_mmcfg_config[0]) *cfg;

@@ -324,21 +359,21 @@
 
 	for (i = 0; i < pci_mmcfg_config_num; i++) {
 		int valid = 0;
-		u32 size = (cfg->end_bus_number + 1) << 20;
+		u64 addr, size;
+
 		cfg = &pci_mmcfg_config[i];
+                addr = cfg->start_bus_number;
+                addr <<= 20;
+                size = cfg->end_bus_number + 1 - cfg->start_bus_number;
+                size <<= 20;
 		printk(KERN_NOTICE "PCI: MCFG configuration %d: base %lx "
 		       "segment %hu buses %u - %u\n",
 		       i, (unsigned long)cfg->address, cfg->pci_segment,
 		       (unsigned int)cfg->start_bus_number,
 		       (unsigned int)cfg->end_bus_number);
 
-		if (!early &&
-		    is_acpi_reserved(cfg->address, cfg->address + size - 1)) {
-			printk(KERN_NOTICE "PCI: MCFG area at %Lx reserved "
-			       "in ACPI motherboard resources\n",
-			       cfg->address);
-			valid = 1;
-		}
+                if (!early)
+                        valid = is_mmconf_reserved(is_acpi_reserved, addr, size, i, cfg, 0);
 
 		if (valid)
 			continue;

@@ -347,16 +382,12 @@
 			printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %Lx is not"
 			       " reserved in ACPI motherboard resources\n",
 			       cfg->address);
+
 		/* Don't try to do this check unless configuration
 		   type 1 is available. how about type 2 ?*/
-		if (raw_pci_ops && e820_all_mapped(cfg->address,
-						  cfg->address + size - 1,
-						  E820_RESERVED)) {
-			printk(KERN_NOTICE
-			       "PCI: MCFG area at %Lx reserved in E820\n",
-			       cfg->address);
-			valid = 1;
-		}
+
+                if (raw_pci_ops)
+                        valid = is_mmconf_reserved(e820_all_mapped, addr, size, i, cfg, 1);
 
 		if (!valid)
 			goto reject;

Unfortunately, unlike the previous patch, this one doesn't allow MMCONFIG to be used on
my MacBook Pro V2. I can completely boot though because I now know to disable PCIEASPM.
Below is the dmesg output with both of your debug patches in place. Let me know if you
have a revised patch for me to test.
Jack
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.27-0.156.rc0.git4.fc9.x86_64 ([email protected]) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Fri Jul 18 19:27:05 EDT 2008 Command line: ro root=UUID=81966632-17b2-4377-929d-dc1e867e4d6d rhgb debug initcall_debug pci=verbose
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bf0e9000 (usable)
BIOS-e820: 00000000bf0e9000 - 00000000bf2ea000 (ACPI NVS)
BIOS-e820: 00000000bf2ea000 - 00000000bfebe000 (ACPI data)
BIOS-e820: 00000000bfebe000 - 00000000bfeef000 (ACPI NVS)
BIOS-e820: 00000000bfeef000 - 00000000bff00000 (ACPI data)
BIOS-e820: 00000000bff00000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
PCI: Unknown option `verbose'
last_pfn = 0xbf0e9 max_arch_pfn = 0x3ffffffff
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
init_memory_mapping
0000000000 - 00bf000000 page 2M
00bf000000 - 00bf0e9000 page 4k
kernel direct mapping tables up to bf0e9000 @ 8000-d000
last_map_addr: bf0e9000 end: bf0e9000
RAMDISK: 37d35000 - 37fef5d1
DMI 2.4 present.
ACPI: RSDP 000FE020, 0024 (r2 APPLE )
ACPI: XSDT BFEFD1C0, 0074 (r1 APPLE Apple00 A5 1000013)
ACPI: FACP BFEFB000, 00F4 (r3 APPLE Apple00 A5 Loki 5F)
ACPI: DSDT BFEF0000, 48BD (r1 APPLE MacBookP 20001 INTL 20050309)
ACPI: FACS BFEC0000, 0040
ACPI: HPET BFEFA000, 0038 (r1 APPLE Apple00 1 Loki 5F)
ACPI: APIC BFEF9000, 0068 (r1 APPLE Apple00 1 Loki 5F)
ACPI: MCFG BFEF8000, 003C (r1 APPLE Apple00 1 Loki 5F)
ACPI: ASF! BFEF7000, 00A0 (r32 APPLE Apple00 1 Loki 5F)
ACPI: SBST BFEF6000, 0030 (r1 APPLE Apple00 1 Loki 5F)
ACPI: ECDT BFEF5000, 0053 (r1 APPLE Apple00 1 Loki 5F)
ACPI: SSDT BFEEF000, 04DC (r1 APPLE CpuPm 3000 INTL 20050309)
ACPI: SSDT BFEBD000, 064F (r1 SataRe SataPri 1000 INTL 20050309)
ACPI: SSDT BFEBC000, 069C (r1 SataRe SataSec 1000 INTL 20050309)
ACPI: DMI detected: Apple
No NUMA configuration found
Faking a node at 0000000000000000-00000000bf0e9000
Entering add_active_range(0, 0x0, 0x9f) 0 entries of 25600 used
Entering add_active_range(0, 0x100, 0xbf0e9) 1 entries of 25600 used
Bootmem setup node 0 0000000000000000-00000000bf0e9000
NODE_DATA [000000000000b000 - 000000000001ffff]
bootmap [0000000000020000 - 0000000000037e1f] pages 18
(6 early reservations) ==> bootmem
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0000200000 - 0000e5fe68] TEXT DATA BSS ==> [0000200000 - 0000e5fe68]
#3 [0037d35000 - 0037fef5d1] RAMDISK ==> [0037d35000 - 0037fef5d1]
#4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#5 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000]
Scan SMP from ffff880000000000 for 1024 bytes.
Scan SMP from ffff88000009fc00 for 1024 bytes.
Scan SMP from ffff8800000f0000 for 65536 bytes.
Scan SMP from ffff88000009fc00 for 1024 bytes.
[ffffe20000000000-ffffe200047fffff] PMD -> [ffff880001200000-ffff8800059fffff] on node 0
Zone PFN ranges:

  DMA      0x00000000 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x000bf0e9

On node 0 totalpages: 782472
DMA zone: 96 pages used for memmap
DMA zone: 3269 pages reserved
DMA zone: 634 pages, LIFO batch:0
DMA32 zone: 18246 pages used for memmap
DMA32 zone: 760227 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at c4000000 (gap: c0000000:30000000)
PERCPU: Allocating 442304 bytes of per cpu data
NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 760861
Policy zone: DMA32
Kernel command line: ro root=UUID=81966632-17b2-4377-929d-dc1e867e4d6d rhgb debug initcall_debug pci=verbose Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
TSC calibrated against PM_TIMER
Detected 2327.507 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES: 8
... MAX_LOCK_DEPTH: 48
... MAX_LOCKDEP_KEYS: 2048
... CLASSHASH_SIZE: 1024

... MAX_LOCKDEP_ENTRIES:     8192
... MAX_LOCKDEP_CHAINS:      16384
... CHAINHASH_SIZE:          8192

memory used by lock dependency info: 1840 kB
per task-struct memory footprint: 3456 bytes
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3039268k/3130276k available (3099k kernel code, 90620k reserved, 1746k data, 1544k init)
CPA: page pool initialized 48 of 48 pages preallocated
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
hpet clockevent registered
Calibrating delay loop (skipped), value calculated using timer frequency.. <6>4655.01 BogoMIPS (lpj=2327507) Security Framework initialized

SELinux:  Initializing.
SELinux:  Starting in permissive mode
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256

Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20080609
CPU0: Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz stepping 06
Using local APIC timer interrupts.
APIC timer calibration result 10390657
Detected 10.390 MHz APIC timer.
lockdep: fixing up alternatives.
Booting processor 1/1 ip 6000
Initializing CPU#1
Calibrating delay using timer specific routine.. <6>4654.80 BogoMIPS (lpj=2327403)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (9309.82 BogoMIPS).
sizeof(vma)=176 bytes
sizeof(page)=96 bytes
sizeof(inode)=1088 bytes
sizeof(dentry)=256 bytes
sizeof(ext3inode)=1488 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=9528 bytes
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
domain 1: span 0-1 level NODE
groups: 0-1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
domain 1: span 0-1 level NODE
groups: 0-1
khelper used greatest stack depth: 5648 bytes left
calling init_cpufreq_transition_notifier_list+0x0/0x20
initcall init_cpufreq_transition_notifier_list+0x0/0x20 returned 0 after 0 msecs calling net_ns_init+0x0/0x134
net_namespace: 1352 bytes
initcall net_ns_init+0x0/0x134 returned 0 after 0 msecs
calling cpufreq_tsc+0x0/0x16
initcall cpufreq_tsc+0x0/0x16 returned 0 after 0 msecs
calling init_smp_flush+0x0/0x6b
initcall init_smp_flush+0x0/0x6b returned 0 after 0 msecs
calling print_banner+0x0/0x13
Booting paravirtualized kernel on bare hardware
initcall print_banner+0x0/0x13 returned 0 after 0 msecs
calling sysctl_init+0x0/0x37
initcall sysctl_init+0x0/0x37 returned 0 after 0 msecs
calling ksysfs_init+0x0/0xc0
initcall ksysfs_init+0x0/0xc0 returned 0 after 0 msecs
calling init_jiffies_clocksource+0x0/0x17
initcall init_jiffies_clocksource+0x0/0x17 returned 0 after 0 msecs calling pm_init+0x0/0x39
initcall pm_init+0x0/0x39 returned 0 after 0 msecs
calling pm_disk_init+0x0/0x1e
initcall pm_disk_init+0x0/0x1e returned 0 after 0 msecs
calling swsusp_header_init+0x0/0x31
initcall swsusp_header_init+0x0/0x31 returned 0 after 0 msecs
calling ftrace_dynamic_init+0x0/0xd7
initcall ftrace_dynamic_init+0x0/0xd7 returned 0 after 0 msecs calling filelock_init+0x0/0x33
initcall filelock_init+0x0/0x33 returned 0 after 0 msecs
calling init_misc_binfmt+0x0/0x44
initcall init_misc_binfmt+0x0/0x44 returned 0 after 0 msecs
calling init_script_binfmt+0x0/0x17
initcall init_script_binfmt+0x0/0x17 returned 0 after 0 msecs
calling init_elf_binfmt+0x0/0x17
initcall init_elf_binfmt+0x0/0x17 returned 0 after 0 msecs
calling init_compat_elf_binfmt+0x0/0x17
initcall init_compat_elf_binfmt+0x0/0x17 returned 0 after 0 msecs calling debugfs_init+0x0/0x56
initcall debugfs_init+0x0/0x56 returned 0 after 0 msecs
calling securityfs_init+0x0/0x56
initcall securityfs_init+0x0/0x56 returned 0 after 0 msecs
calling random32_init+0x0/0x5f
initcall random32_init+0x0/0x5f returned 0 after 0 msecs
calling early_resume_init+0x0/0x1d4
Time: 0:50:35 Date: 07/19/08
initcall early_resume_init+0x0/0x1d4 returned 0 after 0 msecs
calling cpufreq_core_init+0x0/0x8f
initcall cpufreq_core_init+0x0/0x8f returned 0 after 0 msecs
calling cpuidle_init+0x0/0x45
initcall cpuidle_init+0x0/0x45 returned 0 after 0 msecs
calling sock_init+0x0/0x63
initcall sock_init+0x0/0x63 returned 0 after 0 msecs
calling netpoll_init+0x0/0x46
initcall netpoll_init+0x0/0x46 returned 0 after 0 msecs
calling netlink_proto_init+0x0/0x150
NET: Registered protocol family 16
initcall netlink_proto_init+0x0/0x150 returned 0 after 0 msecs calling bdi_class_init+0x0/0x42
initcall bdi_class_init+0x0/0x42 returned 0 after 0 msecs
calling kobject_uevent_init+0x0/0x47
initcall kobject_uevent_init+0x0/0x47 returned 0 after 0 msecs calling pcibus_class_init+0x0/0x17
initcall pcibus_class_init+0x0/0x17 returned 0 after 0 msecs
calling pci_driver_init+0x0/0x17
initcall pci_driver_init+0x0/0x17 returned 0 after 0 msecs
calling backlight_class_init+0x0/0x4e
initcall backlight_class_init+0x0/0x4e returned 0 after 0 msecs calling dock_init+0x0/0x5f
No dock devices found.
initcall dock_init+0x0/0x5f returned 0 after 0 msecs
calling tty_class_init+0x0/0x2f
initcall tty_class_init+0x0/0x2f returned 0 after 0 msecs
calling vtconsole_class_init+0x0/0xbf
initcall vtconsole_class_init+0x0/0xbf returned 0 after 0 msecs calling register_node_type+0x0/0x83
initcall register_node_type+0x0/0x83 returned 0 after 0 msecs
calling enable_pci_io_ecs+0x0/0x33
initcall enable_pci_io_ecs+0x0/0x33 returned 0 after 0 msecs
calling early_fill_mp_bus_info+0x0/0x80c
initcall early_fill_mp_bus_info+0x0/0x80c returned 0 after 0 msecs calling arch_kdebugfs_init+0x0/0x1e0
initcall arch_kdebugfs_init+0x0/0x1e0 returned 0 after 0 msecs calling mtrr_if_init+0x0/0x7e
initcall mtrr_if_init+0x0/0x7e returned 0 after 0 msecs
calling ffh_cstate_init+0x0/0x36
initcall ffh_cstate_init+0x0/0x36 returned 0 after 0 msecs
calling acpi_pci_init+0x0/0x45
ACPI: bus type pci registered
initcall acpi_pci_init+0x0/0x45 returned 0 after 0 msecs
calling init_acpi_device_notify+0x0/0x50
initcall init_acpi_device_notify+0x0/0x50 returned 0 after 0 msecs calling dmi_id_init+0x0/0x2f1
initcall dmi_id_init+0x0/0x2f1 returned 0 after 0 msecs
calling pci_arch_init+0x0/0x53
PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
initcall pci_arch_init+0x0/0x53 returned 0 after 0 msecs
calling topology_init+0x0/0x96
initcall topology_init+0x0/0x96 returned 0 after 0 msecs
calling mtrr_init_finialize+0x0/0x42
initcall mtrr_init_finialize+0x0/0x42 returned 0 after 0 msecs calling param_sysfs_init+0x0/0x1f3
khelper used greatest stack depth: 5552 bytes left
khelper used greatest stack depth: 4904 bytes left
initcall param_sysfs_init+0x0/0x1f3 returned 0 after 9 msecs
calling pm_sysrq_init+0x0/0x1e
initcall pm_sysrq_init+0x0/0x1e returned 0 after 0 msecs
calling readahead_init+0x0/0x3d
initcall readahead_init+0x0/0x3d returned 0 after 0 msecs
calling init_bio+0x0/0xca
initcall init_bio+0x0/0xca returned 0 after 0 msecs
calling integrity_init+0x0/0x3f
initcall integrity_init+0x0/0x3f returned 0 after 0 msecs
calling blk_settings_init+0x0/0x2f
initcall blk_settings_init+0x0/0x2f returned 0 after 0 msecs
calling blk_ioc_init+0x0/0x2f
initcall blk_ioc_init+0x0/0x2f returned 0 after 0 msecs
calling genhd_device_init+0x0/0x5a
initcall genhd_device_init+0x0/0x5a returned 0 after 0 msecs
calling blk_dev_integrity_init+0x0/0x2f
initcall blk_dev_integrity_init+0x0/0x2f returned 0 after 0 msecs calling pci_slot_init+0x0/0x4c
initcall pci_slot_init+0x0/0x4c returned 0 after 0 msecs
calling fbmem_init+0x0/0x8f
initcall fbmem_init+0x0/0x8f returned 0 after 0 msecs
calling acpi_init+0x0/0x226
ACPI: EC: EC description table is found, configuring boot EC
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: BIOS _OSI(Linux) query ignored via DMI
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255
PCI: BIOS Bug: MCFG area at f0000000 is not reserved in ACPI motherboard resources
PCI: Not using MMCONFIG.
initcall acpi_init+0x0/0x226 returned 0 after 125 msecs
calling acpi_scan_init+0x0/0x10f
initcall acpi_scan_init+0x0/0x10f returned 0 after 50 msecs
calling acpi_ec_init+0x0/0x66
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
initcall acpi_ec_init+0x0/0x66 returned 0 after 0 msecs
calling acpi_pci_root_init+0x0/0x2d
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
PCI: 0000:00:07.0 reg 10 32bit mmio: [d8404000, d8404fff]
PCI: 0000:00:1b.0 reg 10 64bit mmio: [d8400000, d8403fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
PCI: 0000:00:1d.0 reg 20 io port: [4080, 409f]
PCI: 0000:00:1d.1 reg 20 io port: [4060, 407f]
PCI: 0000:00:1d.2 reg 20 io port: [4040, 405f]
PCI: 0000:00:1d.3 reg 20 io port: [4020, 403f]
PCI: 0000:00:1d.7 reg 10 32bit mmio: [d8405400, d84057ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
PCI: 0000:00:1f.1 reg 10 io port: [40d8, 40df]
PCI: 0000:00:1f.1 reg 14 io port: [40ec, 40ef]
PCI: 0000:00:1f.1 reg 18 io port: [40d0, 40d7]
PCI: 0000:00:1f.1 reg 1c io port: [40e8, 40eb]
PCI: 0000:00:1f.1 reg 20 io port: [40b0, 40bf]
PCI: 0000:00:1f.2 reg 10 io port: [40c8, 40cf]
PCI: 0000:00:1f.2 reg 14 io port: [40e4, 40e7]
PCI: 0000:00:1f.2 reg 18 io port: [40c0, 40c7]
PCI: 0000:00:1f.2 reg 1c io port: [40e0, 40e3]
PCI: 0000:00:1f.2 reg 20 io port: [40a0, 40af]
PCI: 0000:00:1f.2 reg 24 32bit mmio: [d8405000, d84053ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
PCI: 0000:00:1f.3 reg 20 io port: [efa0, efbf]
PCI: 0000:01:00.0 reg 10 32bit mmio: [c0000000, cfffffff]
PCI: 0000:01:00.0 reg 14 io port: [3000, 30ff]
PCI: 0000:01:00.0 reg 18 32bit mmio: [d8300000, d830ffff]
pci 0000:01:00.0: supports D1
pci 0000:01:00.0: supports D2
PCI: bridge 0000:00:01.0 io port: [3000, 3fff]
PCI: bridge 0000:00:01.0 32bit mmio: [d8300000, d83fffff]
PCI: bridge 0000:00:01.0 64bit mmio pref: [c0000000, cfffffff]
PCI: 0000:02:00.0 reg 10 64bit mmio: [d8200000, d8203fff]
PCI: 0000:02:00.0 reg 18 io port: [2000, 20ff]
pci 0000:02:00.0: supports D1
pci 0000:02:00.0: supports D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
PCI: bridge 0000:00:1c.0 io port: [2000, 2fff]
PCI: bridge 0000:00:1c.0 32bit mmio: [d8200000, d82fffff]
PCI: 0000:03:00.0 reg 10 64bit mmio: [d8100000, d810ffff]
pci 0000:03:00.0: supports D1
pci 0000:03:00.0: PME# supported from D0 D1 D3hot
pci 0000:03:00.0: PME# disabled
PCI: bridge 0000:00:1c.1 32bit mmio: [d8100000, d81fffff]
PCI: bridge 0000:00:1c.2 io port: [1000, 1fff]
PCI: bridge 0000:00:1c.2 32bit mmio: [d4100000, d80fffff]
PCI: bridge 0000:00:1c.2 64bit mmio pref: [d0000000, d3ffffff]
PCI: 0000:0c:03.0 reg 10 32bit mmio: [d4004000, d40047ff]
PCI: 0000:0c:03.0 reg 14 32bit mmio: [d4000000, d4003fff]
pci 0000:0c:03.0: supports D1
pci 0000:0c:03.0: supports D2
pci 0000:0c:03.0: PME# supported from D0 D1 D2 D3hot
pci 0000:0c:03.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
PCI: bridge 0000:00:1e.0 32bit mmio: [d4000000, d40fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
initcall acpi_pci_root_init+0x0/0x2d returned 0 after 78 msecs calling acpi_pci_link_init+0x0/0x4d
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15) initcall acpi_pci_link_init+0x0/0x4d returned 0 after 14 msecs calling acpi_power_init+0x0/0x7c
initcall acpi_power_init+0x0/0x7c returned 0 after 0 msecs
calling acpi_system_init+0x0/0x265
initcall acpi_system_init+0x0/0x265 returned 0 after 0 msecs
calling acpi_cm_sbs_init+0x0/0xd
initcall acpi_cm_sbs_init+0x0/0xd returned 0 after 0 msecs
calling pnp_init+0x0/0x25
Linux Plug and Play Support v0.97 (c) Adam Belay
initcall pnp_init+0x0/0x25 returned 0 after 0 msecs
calling pnpacpi_init+0x0/0x91
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
initcall pnpacpi_init+0x0/0x91 returned 0 after 20 msecs
calling misc_init+0x0/0x9d
initcall misc_init+0x0/0x9d returned 0 after 0 msecs
calling cn_init+0x0/0xf3
initcall cn_init+0x0/0xf3 returned 0 after 0 msecs
calling init_scsi+0x0/0x96
SCSI subsystem initialized
initcall init_scsi+0x0/0x96 returned 0 after 1 msecs
calling ata_init+0x0/0x368
libata version 3.00 loaded.
initcall ata_init+0x0/0x368 returned 0 after 0 msecs
calling init_pcmcia_cs+0x0/0x2d
initcall init_pcmcia_cs+0x0/0x2d returned 0 after 0 msecs
calling usb_init+0x0/0x131
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
initcall usb_init+0x0/0x131 returned 0 after 1 msecs
calling serio_init+0x0/0x8e
initcall serio_init+0x0/0x8e returned 0 after 0 msecs
calling input_init+0x0/0x10c
initcall input_init+0x0/0x10c returned 0 after 0 msecs
calling rtc_init+0x0/0x75
initcall rtc_init+0x0/0x75 returned 0 after 0 msecs
calling power_supply_class_init+0x0/0x39
initcall power_supply_class_init+0x0/0x39 returned 0 after 0 msecs calling thermal_init+0x0/0x56
initcall thermal_init+0x0/0x56 returned 0 after 0 msecs
calling md_init+0x0/0xd5
initcall md_init+0x0/0xd5 returned 0 after 0 msecs
calling leds_init+0x0/0x2f
initcall leds_init+0x0/0x2f returned 0 after 0 msecs
calling dma_bus_init+0x0/0x31
initcall dma_bus_init+0x0/0x31 returned 0 after 0 msecs
calling pci_subsys_init+0x0/0x126
PCI: Using ACPI for IRQ routing
initcall pci_subsys_init+0x0/0x126 returned 0 after 0 msecs
calling proto_init+0x0/0x33
initcall proto_init+0x0/0x33 returned 0 after 0 msecs
calling net_dev_init+0x0/0x1f3
initcall net_dev_init+0x0/0x1f3 returned 0 after 0 msecs
calling neigh_init+0x0/0x76
initcall neigh_init+0x0/0x76 returned 0 after 0 msecs
calling fib_rules_init+0x0/0xab
initcall fib_rules_init+0x0/0xab returned 0 after 0 msecs
calling pktsched_init+0x0/0xc9
initcall pktsched_init+0x0/0xc9 returned 0 after 0 msecs
calling tc_filter_init+0x0/0x51
initcall tc_filter_init+0x0/0x51 returned 0 after 0 msecs
calling tc_action_init+0x0/0x51
initcall tc_action_init+0x0/0x51 returned 0 after 0 msecs
calling genl_init+0x0/0xdd
initcall genl_init+0x0/0xdd returned 0 after 3 msecs
calling cipso_v4_init+0x0/0x8d
initcall cipso_v4_init+0x0/0x8d returned 0 after 0 msecs
calling wireless_nlevent_init+0x0/0x46
initcall wireless_nlevent_init+0x0/0x46 returned 0 after 0 msecs calling netlbl_init+0x0/0x86

NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default

initcall netlbl_init+0x0/0x86 returned 0 after 0 msecs calling sysctl_init+0x0/0x32
initcall sysctl_init+0x0/0x32 returned 0 after 0 msecs calling pci_iommu_init+0x0/0x21
PCI-GART: No AMD northbridge found.
initcall pci_iommu_init+0x0/0x21 returned 0 after 0 msecs calling hpet_late_init+0x0/0x107
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
initcall hpet_late_init+0x0/0x107 returned 0 after 0 msecs calling clocksource_done_booting+0x0/0x17
initcall clocksource_done_booting+0x0/0x17 returned 0 after 0 msecs calling ftrace_init_debugfs+0x0/0xfd
initcall ftrace_init_debugfs+0x0/0xfd returned 0 after 0 msecs Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
calling tracer_alloc_buffers+0x0/0x5a1
tracer: 1286 pages allocated for 65536 entries of 80 bytes
actual entries 65586
initcall tracer_alloc_buffers+0x0/0x5a1 returned 0 after 19 msecs calling init_pipe_fs+0x0/0x51
initcall init_pipe_fs+0x0/0x51 returned 0 after 0 msecs calling init_mnt_writers+0x0/0x95
initcall init_mnt_writers+0x0/0x95 returned 0 after 0 msecs calling eventpoll_init+0x0/0x9a
initcall eventpoll_init+0x0/0x9a returned 0 after 0 msecs calling anon_inode_init+0x0/0x11c
initcall anon_inode_init+0x0/0x11c returned 0 after 0 msecs calling acpi_rtc_init+0x0/0xf9
ACPI: RTC can wake from S4
initcall acpi_rtc_init+0x0/0xf9 returned 0 after 0 msecs calling acpi_event_init+0x0/0x85
initcall acpi_event_init+0x0/0x85 returned 0 after 2 msecs calling pnp_system_init+0x0/0x17
system 00:01: iomem range 0xf0000000-0xf3ffffff could not be reserved system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved system 00:05: iomem range 0xfed00000-0xfed003ff has been reserved system 00:07: ioport range 0x680-0x6ef has been reserved system 00:07: ioport range 0x800-0x80f has been reserved system 00:07: ioport range 0x810-0x817 has been reserved system 00:07: ioport range 0x400-0x47f has been reserved system 00:07: ioport range 0x500-0x53f has been reserved system 00:07: ioport range 0x1640-0x164f has been reserved initcall pnp_system_init+0x0/0x17 returned 0 after 2 msecs calling chr_dev_init+0x0/0x9d
initcall chr_dev_init+0x0/0x9d returned 0 after 2 msecs calling firmware_class_init+0x0/0x77
initcall firmware_class_init+0x0/0x77 returned 0 after 0 msecs calling loopback_init+0x0/0x17
initcall loopback_init+0x0/0x17 returned 0 after 1 msecs calling init_pcmcia_bus+0x0/0x89
initcall init_pcmcia_bus+0x0/0x89 returned 0 after 0 msecs calling cpufreq_gov_performance_init+0x0/0x17
initcall cpufreq_gov_performance_init+0x0/0x17 returned 0 after 0 msecs calling cpufreq_gov_userspace_init+0x0/0x17
initcall cpufreq_gov_userspace_init+0x0/0x17 returned 0 after 0 msecs calling init_acpi_pm_clocksource+0x0/0xae
initcall init_acpi_pm_clocksource+0x0/0xae returned 0 after 0 msecs calling pcibios_assign_resources+0x0/0x8d
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01

pci 0000:00:01.0:   IO window: 0x3000-0x3fff
pci 0000:00:01.0:   MEM window: 0xd8300000-0xd83fffff
pci 0000:00:01.0:   PREFETCH window: 0x000000c0000000-0x000000cfffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0:   IO window: 0x2000-0x2fff
pci 0000:00:1c.0:   MEM window: 0xd8200000-0xd82fffff
pci 0000:00:1c.0:   PREFETCH window: 0x000000d8500000-0x000000d85fffff
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.1:   IO window: disabled
pci 0000:00:1c.1:   MEM window: 0xd8100000-0xd81fffff
pci 0000:00:1c.1:   PREFETCH window: disabled
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.2:   IO window: 0x1000-0x1fff
pci 0000:00:1c.2:   MEM window: 0xd4100000-0xd80fffff
pci 0000:00:1c.2:   PREFETCH window: 0x000000d0000000-0x000000d3ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0c
pci 0000:00:1e.0:   IO window: disabled
pci 0000:00:1e.0:   MEM window: 0xd4000000-0xd40fffff
pci 0000:00:1e.0:   PREFETCH window: disabled

pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.0 to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.1 to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.2 to 64
pci 0000:00:1e.0: power state changed by ACPI to D0
PCI: Setting latency timer of device 0000:00:1e.0 to 64
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffffffffffff]
bus: 01 index 0 io port: [3000, 3fff]
bus: 01 index 1 mmio: [d8300000, d83fffff]
bus: 01 index 2 mmio: [c0000000, cfffffff]
bus: 01 index 3 mmio: [0, 0]
bus: 02 index 0 io port: [2000, 2fff]
bus: 02 index 1 mmio: [d8200000, d82fffff]
bus: 02 index 2 mmio: [d8500000, d85fffff]
bus: 02 index 3 mmio: [0, 0]
bus: 03 index 0 mmio: [0, 0]
bus: 03 index 1 mmio: [d8100000, d81fffff]
bus: 03 index 2 mmio: [0, 0]
bus: 03 index 3 mmio: [0, 0]
bus: 04 index 0 io port: [1000, 1fff]
bus: 04 index 1 mmio: [d4100000, d80fffff]
bus: 04 index 2 mmio: [d0000000, d3ffffff]
bus: 04 index 3 mmio: [0, 0]
bus: 0c index 0 mmio: [0, 0]
bus: 0c index 1 mmio: [d4000000, d40fffff]
bus: 0c index 2 mmio: [0, 0]
bus: 0c index 3 io port: [0, ffff]
bus: 0c index 4 mmio: [0, ffffffffffffffff]
initcall pcibios_assign_resources+0x0/0x8d returned 0 after 9 msecs
calling inet_init+0x0/0x354
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 10, 4194304 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
initcall inet_init+0x0/0x354 returned 0 after 39 msecs
calling af_unix_init+0x0/0x5a
NET: Registered protocol family 1
initcall af_unix_init+0x0/0x5a returned 0 after 0 msecs
calling populate_rootfs+0x0/0xf3
checking if image is initramfs... it is
debug: unmapping init memory ffff880037d35000..ffff880037ff0000
initcall populate_rootfs+0x0/0xf3 returned 0 after 259 msecs
calling calgary_fixup_tce_spaces+0x0/0xfe
initcall calgary_fixup_tce_spaces+0x0/0xfe returned -19 after 0 msecs
calling i8259A_init_sysfs+0x0/0x27
initcall i8259A_init_sysfs+0x0/0x27 returned 0 after 0 msecs
calling vsyscall_init+0x0/0x71
initcall vsyscall_init+0x0/0x71 returned 0 after 0 msecs
calling sbf_init+0x0/0xf4
initcall sbf_init+0x0/0xf4 returned 0 after 0 msecs
calling i8237A_init_sysfs+0x0/0x27
initcall i8237A_init_sysfs+0x0/0x27 returned 0 after 0 msecs
calling add_rtc_cmos+0x0/0x1d
initcall add_rtc_cmos+0x0/0x1d returned 0 after 0 msecs
calling cache_sysfs_init+0x0/0x62
initcall cache_sysfs_init+0x0/0x62 returned 0 after 2 msecs
calling mce_init_device+0x0/0x8a
initcall mce_init_device+0x0/0x8a returned 0 after 1 msecs
calling periodic_mcheck_init+0x0/0x44
initcall periodic_mcheck_init+0x0/0x44 returned 0 after 0 msecs
calling thermal_throttle_init_device+0x0/0x92
initcall thermal_throttle_init_device+0x0/0x92 returned 0 after 0 msecs
calling threshold_init_device+0x0/0x4e
initcall threshold_init_device+0x0/0x4e returned 0 after 0 msecs
calling msr_init+0x0/0x124
initcall msr_init+0x0/0x124 returned 0 after 0 msecs
calling cpuid_init+0x0/0x124
initcall cpuid_init+0x0/0x124 returned 0 after 0 msecs
calling init_lapic_sysfs+0x0/0x32
initcall init_lapic_sysfs+0x0/0x32 returned 0 after 0 msecs
calling ioapic_init_sysfs+0x0/0xac
initcall ioapic_init_sysfs+0x0/0xac returned 0 after 0 msecs
calling add_pcspkr+0x0/0x45
initcall add_pcspkr+0x0/0x45 returned 0 after 0 msecs
calling uv_ptc_init+0x0/0x7a
initcall uv_ptc_init+0x0/0x7a returned 0 after 0 msecs
calling uv_bau_init+0x0/0x604
initcall uv_bau_init+0x0/0x604 returned 0 after 0 msecs
calling audit_classes_init+0x0/0xb4
initcall audit_classes_init+0x0/0xb4 returned 0 after 0 msecs
calling debug_pagealloc_proc_init+0x0/0x30
initcall debug_pagealloc_proc_init+0x0/0x30 returned 0 after 0 msecs
calling pt_dump_init+0x0/0x30
initcall pt_dump_init+0x0/0x30 returned 0 after 0 msecs
calling init_vdso_vars+0x0/0x219
initcall init_vdso_vars+0x0/0x219 returned 0 after 0 msecs
calling ia32_binfmt_init+0x0/0x19
initcall ia32_binfmt_init+0x0/0x19 returned 0 after 0 msecs
calling sysenter_setup+0x0/0x2ad
initcall sysenter_setup+0x0/0x2ad returned 0 after 0 msecs
calling init_sched_debug_procfs+0x0/0x2c
initcall init_sched_debug_procfs+0x0/0x2c returned 0 after 0 msecs
calling create_proc_profile+0x0/0x2cf
initcall create_proc_profile+0x0/0x2cf returned 0 after 0 msecs
calling ioresources_init+0x0/0x41
initcall ioresources_init+0x0/0x41 returned 0 after 0 msecs
calling uid_cache_init+0x0/0x92
initcall uid_cache_init+0x0/0x92 returned 0 after 0 msecs
calling init_posix_timers+0x0/0xa0
initcall init_posix_timers+0x0/0xa0 returned 0 after 0 msecs
calling init_posix_cpu_timers+0x0/0xb5
initcall init_posix_cpu_timers+0x0/0xb5 returned 0 after 0 msecs
calling nsproxy_cache_init+0x0/0x32
initcall nsproxy_cache_init+0x0/0x32 returned 0 after 0 msecs
calling timekeeping_init_device+0x0/0x27
initcall timekeeping_init_device+0x0/0x27 returned 0 after 0 msecs
calling init_clocksource_sysfs+0x0/0x55
initcall init_clocksource_sysfs+0x0/0x55 returned 0 after 0 msecs
calling init_timer_list_procfs+0x0/0x31
initcall init_timer_list_procfs+0x0/0x31 returned 0 after 0 msecs
calling init_tstats_procfs+0x0/0x31
initcall init_tstats_procfs+0x0/0x31 returned 0 after 0 msecs
calling lockdep_proc_init+0x0/0x7c
initcall lockdep_proc_init+0x0/0x7c returned 0 after 0 msecs
calling futex_init+0x0/0xcc
initcall futex_init+0x0/0xcc returned 0 after 0 msecs
calling proc_dma_init+0x0/0x27
initcall proc_dma_init+0x0/0x27 returned 0 after 0 msecs
calling percpu_modinit+0x0/0x79
initcall percpu_modinit+0x0/0x79 returned 0 after 0 msecs
calling kallsyms_init+0x0/0x2a
initcall kallsyms_init+0x0/0x2a returned 0 after 0 msecs
calling snapshot_device_init+0x0/0x17
initcall snapshot_device_init+0x0/0x17 returned 0 after 0 msecs
calling crash_save_vmcoreinfo_init+0x0/0x430
initcall crash_save_vmcoreinfo_init+0x0/0x430 returned 0 after 0 msecs
calling crash_notes_memory_init+0x0/0x44
initcall crash_notes_memory_init+0x0/0x44 returned 0 after 0 msecs
calling pid_namespaces_init+0x0/0x32
initcall pid_namespaces_init+0x0/0x32 returned 0 after 0 msecs
calling audit_init+0x0/0x172
audit: initializing netlink socket (disabled)
type=2000 audit(1216428634.918:1): initialized
initcall audit_init+0x0/0x172 returned 0 after 0 msecs
calling audit_tree_init+0x0/0x4e
initcall audit_tree_init+0x0/0x4e returned 0 after 0 msecs
calling init_kprobes+0x0/0x124
initcall init_kprobes+0x0/0x124 returned 0 after 4 msecs
calling relay_init+0x0/0x19
initcall relay_init+0x0/0x19 returned 0 after 0 msecs
calling utsname_sysctl_init+0x0/0x19
initcall utsname_sysctl_init+0x0/0x19 returned 0 after 0 msecs
calling init_lstats_procfs+0x0/0x2a
initcall init_lstats_procfs+0x0/0x2a returned 0 after 0 msecs
calling init_sched_switch_trace+0x0/0x41
initcall init_sched_switch_trace+0x0/0x41 returned 0 after 0 msecs
calling init_stack_trace+0x0/0x12
initcall init_stack_trace+0x0/0x12 returned 0 after 0 msecs
calling init_function_trace+0x0/0x12
initcall init_function_trace+0x0/0x12 returned 0 after 0 msecs
calling init_irqsoff_tracer+0x0/0x14
initcall init_irqsoff_tracer+0x0/0x14 returned 0 after 0 msecs
calling init_wakeup_tracer+0x0/0x12
initcall init_wakeup_tracer+0x0/0x12 returned 0 after 0 msecs
calling init_per_zone_pages_min+0x0/0x46
initcall init_per_zone_pages_min+0x0/0x46 returned 0 after 0 msecs
calling pdflush_init+0x0/0x17
initcall pdflush_init+0x0/0x17 returned 0 after 0 msecs
calling kswapd_init+0x0/0x7d
initcall kswapd_init+0x0/0x7d returned 0 after 0 msecs
calling setup_vmstat+0x0/0x4f
initcall setup_vmstat+0x0/0x4f returned 0 after 0 msecs
calling procswaps_init+0x0/0x27
initcall procswaps_init+0x0/0x27 returned 0 after 0 msecs
calling hugetlb_init+0x0/0xa0
Total HugeTLB memory allocated, 0
initcall hugetlb_init+0x0/0xa0 returned 0 after 0 msecs
calling init_tmpfs+0x0/0xdf
initcall init_tmpfs+0x0/0xdf returned 0 after 0 msecs
calling slab_sysfs_init+0x0/0xf5
initcall slab_sysfs_init+0x0/0xf5 returned 0 after 29 msecs
calling fasync_init+0x0/0x2f
initcall fasync_init+0x0/0x2f returned 0 after 0 msecs
calling aio_setup+0x0/0x78
initcall aio_setup+0x0/0x78 returned 0 after 0 msecs
calling inotify_setup+0x0/0x17
initcall inotify_setup+0x0/0x17 returned 0 after 0 msecs
calling inotify_user_setup+0x0/0xbd
initcall inotify_user_setup+0x0/0xbd returned 0 after 0 msecs
calling init_sys32_ioctl+0x0/0x8a
initcall init_sys32_ioctl+0x0/0x8a returned 0 after 0 msecs
calling dquot_init+0x0/0x108
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
initcall dquot_init+0x0/0x108 returned 0 after 0 msecs
calling init_v2_quota_format+0x0/0x17
initcall init_v2_quota_format+0x0/0x17 returned 0 after 0 msecs
calling dnotify_init+0x0/0x2f
initcall dnotify_init+0x0/0x2f returned 0 after 0 msecs
calling vmcore_init+0x0/0x860
initcall vmcore_init+0x0/0x860 returned 0 after 0 msecs
calling init_devpts_fs+0x0/0x44
initcall init_devpts_fs+0x0/0x44 returned 0 after 0 msecs
calling init_ramfs_fs+0x0/0x17
initcall init_ramfs_fs+0x0/0x17 returned 0 after 0 msecs
calling init_hugetlbfs_fs+0x0/0x9d
initcall init_hugetlbfs_fs+0x0/0x9d returned 0 after 0 msecs
calling init_iso9660_fs+0x0/0x76
initcall init_iso9660_fs+0x0/0x76 returned 0 after 0 msecs
calling init_nls_cp437+0x0/0x17
initcall init_nls_cp437+0x0/0x17 returned 0 after 0 msecs
calling init_nls_ascii+0x0/0x17
initcall init_nls_ascii+0x0/0x17 returned 0 after 0 msecs
calling ipc_init+0x0/0x28
msgmni has been set to 5936
initcall ipc_init+0x0/0x28 returned 0 after 0 msecs
calling ipc_sysctl_init+0x0/0x19
initcall ipc_sysctl_init+0x0/0x19 returned 0 after 0 msecs
calling init_mqueue_fs+0x0/0xdb
initcall init_mqueue_fs+0x0/0xdb returned 0 after 0 msecs
calling key_proc_init+0x0/0x5e
initcall key_proc_init+0x0/0x5e returned 0 after 0 msecs
calling selinux_nf_ip_init+0x0/0x7f
SELinux: Registering netfilter hooks
initcall selinux_nf_ip_init+0x0/0x7f returned 0 after 0 msecs
calling init_sel_fs+0x0/0x6d
initcall init_sel_fs+0x0/0x6d returned 0 after 1 msecs
calling selnl_init+0x0/0x52
initcall selnl_init+0x0/0x52 returned 0 after 0 msecs
calling sel_netif_init+0x0/0x6b
initcall sel_netif_init+0x0/0x6b returned 0 after 0 msecs
calling sel_netnode_init+0x0/0x78
initcall sel_netnode_init+0x0/0x78 returned 0 after 0 msecs
calling sel_netport_init+0x0/0x78
initcall sel_netport_init+0x0/0x78 returned 0 after 0 msecs
calling aurule_init+0x0/0x3c
initcall aurule_init+0x0/0x3c returned 0 after 0 msecs
calling crypto_algapi_init+0x0/0x12
initcall crypto_algapi_init+0x0/0x12 returned 0 after 0 msecs
calling cryptomgr_init+0x0/0x17
initcall cryptomgr_init+0x0/0x17 returned 0 after 0 msecs
calling hmac_module_init+0x0/0x17
initcall hmac_module_init+0x0/0x17 returned 0 after 0 msecs
calling md5_mod_init+0x0/0x17
initcall md5_mod_init+0x0/0x17 returned 0 after 0 msecs
calling sha1_generic_mod_init+0x0/0x17
initcall sha1_generic_mod_init+0x0/0x17 returned 0 after 0 msecs
calling bsg_init+0x0/0x128
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
initcall bsg_init+0x0/0x128 returned 0 after 0 msecs
calling noop_init+0x0/0x19
io scheduler noop registered
initcall noop_init+0x0/0x19 returned 0 after 0 msecs
calling as_init+0x0/0x19
io scheduler anticipatory registered
initcall as_init+0x0/0x19 returned 0 after 0 msecs
calling deadline_init+0x0/0x19
io scheduler deadline registered
initcall deadline_init+0x0/0x19 returned 0 after 0 msecs
calling cfq_init+0x0/0x99
io scheduler cfq registered (default)
initcall cfq_init+0x0/0x99 returned 0 after 0 msecs
calling debug_objects_init_debugfs+0x0/0x64
initcall debug_objects_init_debugfs+0x0/0x64 returned 0 after 0 msecs
calling percpu_counter_startup+0x0/0x14
initcall percpu_counter_startup+0x0/0x14 returned 0 after 0 msecs
calling pci_init+0x0/0x3a
pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x1010
pci 0000:00:1d.0: Performing full reset
pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010
pci 0000:00:1d.1: Performing full reset
pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010
pci 0000:00:1d.2: Performing full reset
pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0010
pci 0000:00:1d.3: Performing full reset
pci 0000:01:00.0: Boot video device
initcall pci_init+0x0/0x3a returned 0 after 1 msecs
calling pci_proc_init+0x0/0x70
initcall pci_proc_init+0x0/0x70 returned 0 after 0 msecs
calling pcie_portdrv_init+0x0/0x52
PCI: Setting latency timer of device 0000:00:01.0 to 64
pcieport-driver 0000:00:01.0: found MSI capability
pci_express 0000:00:01.0:pcie00: allocate port service
PCI: Setting latency timer of device 0000:00:1c.0 to 64
pcieport-driver 0000:00:1c.0: found MSI capability
pci_express 0000:00:1c.0:pcie00: allocate port service
pci_express 0000:00:1c.0:pcie02: allocate port service
PCI: Setting latency timer of device 0000:00:1c.1 to 64
pcieport-driver 0000:00:1c.1: found MSI capability
pci_express 0000:00:1c.1:pcie00: allocate port service
pci_express 0000:00:1c.1:pcie02: allocate port service
PCI: Setting latency timer of device 0000:00:1c.2 to 64
pcieport-driver 0000:00:1c.2: found MSI capability
pci_express 0000:00:1c.2:pcie00: allocate port service
pci_express 0000:00:1c.2:pcie02: allocate port service
initcall pcie_portdrv_init+0x0/0x52 returned 0 after 5 msecs
calling aer_service_init+0x0/0x25
initcall aer_service_init+0x0/0x25 returned 0 after 0 msecs
calling pci_hotplug_init+0x0/0x22
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
initcall pci_hotplug_init+0x0/0x22 returned 0 after 0 msecs
calling fb_console_init+0x0/0x12b
initcall fb_console_init+0x0/0x12b returned 0 after 0 msecs
calling vesafb_init+0x0/0x23f
initcall vesafb_init+0x0/0x23f returned 0 after 0 msecs
calling efifb_init+0x0/0x1f2
initcall efifb_init+0x0/0x1f2 returned -19 after 0 msecs
calling acpi_reserve_resources+0x0/0xf0
initcall acpi_reserve_resources+0x0/0xf0 returned 0 after 0 msecs
calling acpi_button_init+0x0/0x63
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID0]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
ACPI: Sleep Button (CM) [SLPB]
initcall acpi_button_init+0x0/0x63 returned 0 after 4 msecs
calling acpi_fan_init+0x0/0x63
initcall acpi_fan_init+0x0/0x63 returned 0 after 0 msecs
calling irqrouter_init_sysfs+0x0/0x3d
initcall irqrouter_init_sysfs+0x0/0x3d returned 0 after 0 msecs
calling acpi_processor_init+0x0/0x10f
ACPI: SSDT BFEB8A90, 02F0 (r1 APPLE Cpu0Ist 3000 INTL 20050309)
ACPI: SSDT BFEB6C10, 02A0 (r1 APPLE Cpu0Cst 3001 INTL 20050309)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT BFEB7F10, 0087 (r1 APPLE Cpu1Ist 3000 INTL 20050309)
ACPI: SSDT BFEB6F10, 0085 (r1 APPLE Cpu1Cst 3000 INTL 20050309)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: ACPI0007:01 is registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
initcall acpi_processor_init+0x0/0x10f returned 0 after 25 msecs
calling acpi_container_init+0x0/0x47
initcall acpi_container_init+0x0/0x47 returned 0 after 25 msecs
calling acpi_thermal_init+0x0/0x88
initcall acpi_thermal_init+0x0/0x88 returned 0 after 0 msecs
calling rand_initialize+0x0/0x31
initcall rand_initialize+0x0/0x31 returned 0 after 0 msecs
calling tty_init+0x0/0x1ca
initcall tty_init+0x0/0x1ca returned 0 after 28 msecs
calling pty_init+0x0/0x278
initcall pty_init+0x0/0x278 returned 0 after 0 msecs
calling hpet_init+0x0/0x6f
hpet_resources: 0xfed00000 is busy
initcall hpet_init+0x0/0x6f returned 0 after 1 msecs
calling nvram_init+0x0/0x8f
Non-volatile memory driver v1.2
initcall nvram_init+0x0/0x8f returned 0 after 0 msecs
calling agp_init+0x0/0x2b
Linux agpgart interface v0.103
initcall agp_init+0x0/0x2b returned 0 after 0 msecs
calling agp_intel_init+0x0/0x2e
initcall agp_intel_init+0x0/0x2e returned 0 after 0 msecs
calling agp_sis_init+0x0/0x2e
initcall agp_sis_init+0x0/0x2e returned 0 after 0 msecs
calling agp_via_init+0x0/0x2e
initcall agp_via_init+0x0/0x2e returned 0 after 0 msecs
calling cn_proc_init+0x0/0x42
initcall cn_proc_init+0x0/0x42 returned 0 after 0 msecs
calling serial8250_init+0x0/0x148
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
initcall serial8250_init+0x0/0x148 returned 0 after 2 msecs
calling serial8250_pnp_init+0x0/0x17
initcall serial8250_pnp_init+0x0/0x17 returned 0 after 0 msecs
calling serial8250_pci_init+0x0/0x20
initcall serial8250_pci_init+0x0/0x20 returned 0 after 0 msecs
calling init_kgdboc+0x0/0x1b
initcall init_kgdboc+0x0/0x1b returned 0 after 0 msecs
calling topology_sysfs_init+0x0/0x5e
initcall topology_sysfs_init+0x0/0x5e returned 0 after 0 msecs
calling brd_init+0x0/0x172
brd: module loaded
initcall brd_init+0x0/0x172 returned 0 after 11 msecs
calling init_kgdbts+0x0/0x1b
initcall init_kgdbts+0x0/0x1b returned 0 after 0 msecs
calling net_olddevs_init+0x0/0xa3
initcall net_olddevs_init+0x0/0xa3 returned 0 after 0 msecs
calling mac_hid_init+0x0/0xd7
input: Macintosh mouse button emulation as /devices/virtual/input/input4
initcall mac_hid_init+0x0/0xd7 returned 0 after 0 msecs
calling init_sd+0x0/0xfd
Driver 'sd' needs updating - please use bus_type methods
initcall init_sd+0x0/0xfd returned 0 after 0 msecs
calling init_sg+0x0/0x145
initcall init_sg+0x0/0x145 returned 0 after 0 msecs
calling nonstatic_sysfs_init+0x0/0x17
initcall nonstatic_sysfs_init+0x0/0x17 returned 0 after 0 msecs
calling yenta_socket_init+0x0/0x20
initcall yenta_socket_init+0x0/0x20 returned 0 after 0 msecs
calling mon_init+0x0/0x11c
initcall mon_init+0x0/0x11c returned 0 after 0 msecs
calling i8042_init+0x0/0x371
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
initcall i8042_init+0x0/0x371 returned -19 after 2 msecs
calling serport_init+0x0/0x39
initcall serport_init+0x0/0x39 returned 0 after 0 msecs
calling mousedev_init+0x0/0x67
mice: PS/2 mouse device common for all mice
initcall mousedev_init+0x0/0x67 returned 0 after 4 msecs
calling evdev_init+0x0/0x17
initcall evdev_init+0x0/0x17 returned 0 after 24 msecs
calling atkbd_init+0x0/0x2c
initcall atkbd_init+0x0/0x2c returned 0 after 0 msecs
calling psmouse_init+0x0/0x78
initcall psmouse_init+0x0/0x78 returned 0 after 0 msecs
calling cmos_init+0x0/0x35
rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
initcall cmos_init+0x0/0x35 returned 0 after 0 msecs
calling init_ladder+0x0/0x17
cpuidle: using governor ladder
initcall init_ladder+0x0/0x17 returned 0 after 1 msecs
calling init_menu+0x0/0x17
cpuidle: using governor menu
initcall init_menu+0x0/0x17 returned 0 after 3 msecs
calling efivars_init+0x0/0x1f5
initcall efivars_init+0x0/0x1f5 returned -19 after 0 msecs
calling hid_init+0x0/0x10
initcall hid_init+0x0/0x10 returned 0 after 0 msecs
calling hid_init+0x0/0x67
Marking TSC unstable due to TSC halts in idle
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
initcall hid_init+0x0/0x67 returned 0 after 1 msecs
calling sysctl_core_init+0x0/0x17
initcall sysctl_core_init+0x0/0x17 returned 0 after 0 msecs
calling flow_cache_init+0x0/0x1ca
initcall flow_cache_init+0x0/0x1ca returned 0 after 0 msecs
calling llc_init+0x0/0x25
initcall llc_init+0x0/0x25 returned 0 after 0 msecs
calling snap_init+0x0/0x36
initcall snap_init+0x0/0x36 returned 0 after 0 msecs
calling rif_init+0x0/0x9a
initcall rif_init+0x0/0x9a returned 0 after 0 msecs
calling blackhole_module_init+0x0/0x17
initcall blackhole_module_init+0x0/0x17 returned 0 after 0 msecs
calling sysctl_ipv4_init+0x0/0x53
initcall sysctl_ipv4_init+0x0/0x53 returned 0 after 1 msecs
calling init_syncookies+0x0/0x1e
initcall init_syncookies+0x0/0x1e returned 0 after 0 msecs
calling ipv4_netfilter_init+0x0/0x17
initcall ipv4_netfilter_init+0x0/0x17 returned 0 after 0 msecs
calling cubictcp_register+0x0/0x6a
TCP cubic registered
initcall cubictcp_register+0x0/0x6a returned 0 after 0 msecs
calling xfrm_user_init+0x0/0x5e
Initializing XFRM netlink socket
initcall xfrm_user_init+0x0/0x5e returned 0 after 0 msecs
calling packet_init+0x0/0x4c
NET: Registered protocol family 17
initcall packet_init+0x0/0x4c returned 0 after 0 msecs
calling hpet_insert_resource+0x0/0x28
initcall hpet_insert_resource+0x0/0x28 returned 0 after 0 msecs
calling update_mp_table+0x0/0x61b
initcall update_mp_table+0x0/0x61b returned 0 after 0 msecs
calling lapic_insert_resource+0x0/0x45
initcall lapic_insert_resource+0x0/0x45 returned 0 after 0 msecs
calling init_lapic_nmi_sysfs+0x0/0x3d
initcall init_lapic_nmi_sysfs+0x0/0x3d returned 0 after 0 msecs
calling ioapic_insert_resources+0x0/0x54
initcall ioapic_insert_resources+0x0/0x54 returned 0 after 0 msecs
calling check_early_ioremap_leak+0x0/0x49
initcall check_early_ioremap_leak+0x0/0x49 returned 0 after 0 msecs
calling sched_init_debug+0x0/0x24
initcall sched_init_debug+0x0/0x24 returned 0 after 0 msecs
calling init_oops_id+0x0/0x28
initcall init_oops_id+0x0/0x28 returned 0 after 0 msecs
calling disable_boot_consoles+0x0/0x3f
initcall disable_boot_consoles+0x0/0x3f returned 0 after 0 msecs
calling pm_qos_power_init+0x0/0xcf
initcall pm_qos_power_init+0x0/0xcf returned 0 after 0 msecs
calling software_resume+0x0/0x1ba
initcall software_resume+0x0/0x1ba returned -2 after 0 msecs
initcall software_resume+0x0/0x1ba returned with error code -2
calling debugfs_kprobe_init+0x0/0x8e
initcall debugfs_kprobe_init+0x0/0x8e returned 0 after 0 msecs
calling taskstats_init+0x0/0x9a
registered taskstats version 1
initcall taskstats_init+0x0/0x9a returned 0 after 0 msecs
calling fail_page_alloc_debugfs+0x0/0xe9
initcall fail_page_alloc_debugfs+0x0/0xe9 returned 0 after 0 msecs
calling fail_make_request_debugfs+0x0/0x1e
initcall fail_make_request_debugfs+0x0/0x1e returned 0 after 0 msecs
calling random32_reseed+0x0/0x7e
initcall random32_reseed+0x0/0x7e returned 0 after 0 msecs
calling pci_sysfs_init+0x0/0x51
initcall pci_sysfs_init+0x0/0x51 returned 0 after 0 msecs
calling acpi_wakeup_device_init+0x0/0xb6
initcall acpi_wakeup_device_init+0x0/0xb6 returned 0 after 0 msecs
calling acpi_sleep_proc_init+0x0/0x5a
initcall acpi_sleep_proc_init+0x0/0x5a returned 0 after 0 msecs
calling seqgen_init+0x0/0x14
initcall seqgen_init+0x0/0x14 returned 0 after 0 msecs
calling late_resume_init+0x0/0x112
Magic number: 0:218:810
initcall late_resume_init+0x0/0x112 returned 0 after 0 msecs
calling scsi_complete_async_scans+0x0/0xf4
initcall scsi_complete_async_scans+0x0/0xf4 returned 0 after 0 msecs
calling memmap_init+0x0/0x9d
initcall memmap_init+0x0/0x9d returned 0 after 0 msecs
calling pci_mmcfg_late_insert_resources+0x0/0x48
initcall pci_mmcfg_late_insert_resources+0x0/0x48 returned 1 after 0 msecs
initcall pci_mmcfg_late_insert_resources+0x0/0x48 returned with error code 1
calling tcp_congestion_default+0x0/0x17
initcall tcp_congestion_default+0x0/0x17 returned 0 after 0 msecs
debug: unmapping init memory ffffffff814eb000..ffffffff8166d000
Write protecting the kernel read-only data: 1368k
ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
drivers/usb/core/inode.c: creating file 'devices'
drivers/usb/core/inode.c: creating file '001'
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: supports USB remote wakeup
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd8405400
ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: default language 0x0409
usb usb1: uevent
Clocksource tsc unstable (delta = -253155005 ns)
usb usb1: usb_probe_device
usb usb1: configuration #1 chosen from 1 choice
usb usb1: adding 1-0:1.0 (config #1, interface 0)
usb 1-0:1.0: uevent
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: no power switching (usb 1.0)
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: power on to power good time: 20ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: trying to enable port power on non-switchable hub
hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000
drivers/usb/core/inode.c: creating file '001'
ehci_hcd 0000:00:1d.7: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT
hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.27-0.156.rc0.git4.fc9.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
modprobe used greatest stack depth: 3840 bytes left
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd: block sizes: ed 80 td 96
USB Universal Host Controller Interface driver v3.0
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
drivers/usb/core/inode.c: creating file '002'
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.0: Performing full reset
uhci_hcd 0000:00:1d.0: supports USB remote wakeup
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080
usb usb2: default language 0x0409
usb usb2: uevent
usb usb2: usb_probe_device
usb usb2: configuration #1 chosen from 1 choice
usb usb2: adding 2-0:1.0 (config #1, interface 0)
usb 2-0:1.0: uevent
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: no power switching (usb 1.0)
hub 2-0:1.0: individual port over-current protection
hub 2-0:1.0: power on to power good time: 2ms
hub 2-0:1.0: local power source is good
hub 2-0:1.0: trying to enable port power on non-switchable hub
hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501
drivers/usb/core/inode.c: creating file '001'
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.27-0.156.rc0.git4.fc9.x86_64 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
drivers/usb/core/inode.c: creating file '003'
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.1: Performing full reset
uhci_hcd 0000:00:1d.1: supports USB remote wakeup
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060
usb usb3: default language 0x0409
usb usb3: uevent
usb usb3: usb_probe_device
usb usb3: configuration #1 chosen from 1 choice
usb usb3: adding 3-0:1.0 (config #1, interface 0)
usb 3-0:1.0: uevent
hub 3-0:1.0: usb_probe_interface
hub 3-0:1.0: usb_probe_interface - got id
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
hub 3-0:1.0: standalone hub
hub 3-0:1.0: no power switching (usb 1.0)
hub 3-0:1.0: individual port over-current protection
hub 3-0:1.0: power on to power good time: 2ms
hub 3-0:1.0: local power source is good
hub 3-0:1.0: trying to enable port power on non-switchable hub
ehci_hcd 0000:00:1d.7: port 2 full speed --> companion
ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT
hub 1-0:1.0: port 2 not reset yet, waiting 50ms
ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC CONNECT
hub 1-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
drivers/usb/core/inode.c: creating file '001'
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.27-0.156.rc0.git4.fc9.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
drivers/usb/core/inode.c: creating file '004'
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.2: Performing full reset
uhci_hcd 0000:00:1d.2: supports USB remote wakeup
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
usb usb4: default language 0x0409
usb usb4: uevent
usb usb4: usb_probe_device
usb usb4: configuration #1 chosen from 1 choice
usb usb4: adding 4-0:1.0 (config #1, interface 0)
usb 4-0:1.0: uevent
hub 4-0:1.0: usb_probe_interface
hub 4-0:1.0: usb_probe_interface - got id
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
hub 4-0:1.0: standalone hub
hub 4-0:1.0: no power switching (usb 1.0)
hub 4-0:1.0: individual port over-current protection
hub 4-0:1.0: power on to power good time: 2ms
hub 4-0:1.0: local power source is good
hub 4-0:1.0: trying to enable port power on non-switchable hub
hub 1-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
drivers/usb/core/inode.c: creating file '001'
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.27-0.156.rc0.git4.fc9.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
drivers/usb/core/inode.c: creating file '005'
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: detected 2 ports
uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.3: Performing full reset
uhci_hcd 0000:00:1d.3: supports USB remote wakeup
uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020
usb usb5: default language 0x0409
usb usb5: uevent
usb usb5: usb_probe_device
usb usb5: configuration #1 chosen from 1 choice
usb usb5: adding 5-0:1.0 (config #1, interface 0)
usb 5-0:1.0: uevent
hub 5-0:1.0: usb_probe_interface
hub 5-0:1.0: usb_probe_interface - got id
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
hub 5-0:1.0: standalone hub
hub 5-0:1.0: no power switching (usb 1.0)
hub 5-0:1.0: individual port over-current protection
hub 5-0:1.0: power on to power good time: 2ms
hub 5-0:1.0: local power source is good
hub 5-0:1.0: trying to enable port power on non-switchable hub
ehci_hcd 0000:00:1d.7: port 4 high speed
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT
usb 1-4: new high speed USB device using ehci_hcd and address 3
drivers/usb/core/inode.c: creating file '001'
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.27-0.156.rc0.git4.fc9.x86_64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
ehci_hcd 0000:00:1d.7: port 4 high speed
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT
ata_piix 0000:00:1f.1: version 2.12
ata_piix 0000:00:1f.1: power state changed by ACPI to D0
ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40b0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40b8 irq 15
usb 1-4: uevent
usb 1-4: usb_probe_device
usb 1-4: configuration #1 chosen from 1 choice
usb 1-4: adding 1-4:1.0 (config #1, interface 0)
usb 1-4:1.0: uevent
drivers/usb/core/inode.c: creating file '003'
usb 1-4: New USB device found, idVendor=05ac, idProduct=8300
usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
ehci_hcd 0000:00:1d.7: GetStatus port 6 status 001803 POWER sig=j CSC CONNECT
hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
ata1.00: ATAPI: MATSHITADVD-R UJ-85J, FAV1, max UDMA/66
ata1.00: configured for UDMA/66
hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: port 6 full speed --> companion
ehci_hcd 0000:00:1d.7: GetStatus port 6 status 003801 POWER OWNER sig=j CONNECT
hub 1-0:1.0: port 6 not reset yet, waiting 50ms
ehci_hcd 0000:00:1d.7: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC
ehci_hcd 0000:00:1d.7: GetStatus port 7 status 001803 POWER sig=j CSC CONNECT
hub 1-0:1.0: port 7, status 0501, change 0001, 480 Mb/s
isa bounce pool size: 16 pages
scsi 0:0:0:0: CD-ROM MATSHITA DVD-R UJ-85J FAV1 PQ: 0 ANSI: 5
scsi 0:0:0:0: Attached scsi generic sg0 type 5
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
hub 1-0:1.0: debounce: port 7: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: port 7 full speed --> companion
ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003801 POWER OWNER sig=j CONNECT
hub 1-0:1.0: port 7 not reset yet, waiting 50ms
ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003002 POWER OWNER sig=se0 CSC
hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0004
uhci_hcd 0000:00:1d.0: port 2 portsc 009b,00
hub 2-0:1.0: port 2, status 0101, change 0003, 12 Mb/s
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x40c8 ctl 0x40e4 bmdma 0x40a0 irq 19
ata4: SATA max UDMA/133 cmd 0x40c0 ctl 0x40e0 bmdma 0x40a8 irq 19
hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
ata3.01: ATA-7: TOSHIBA MK2035GSS, DK021B, max UDMA/100
ata3.01: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/4)
ata3.01: configured for UDMA/100
usb 2-2: new full speed USB device using uhci_hcd and address 2
usb 2-2: ep0 maxpacket = 8
usb 2-2: USB quirks for this device: 2
scsi 2:0:1:0: Direct-Access ATA TOSHIBA MK2035GS DK02 PQ: 0 ANSI: 5
sd 2:0:1:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
sd 2:0:1:0: [sda] Write Protect is off
sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:1:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
sd 2:0:1:0: [sda] Write Protect is off
sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:<7>usb 2-2: skipped 1 descriptor after interface
usb 2-2: skipped 1 descriptor after interface
usb 2-2: skipped 1 descriptor after interface
usb 2-2: default language 0x0409
usb 2-2: uevent
usb 2-2: usb_probe_device
usb 2-2: configuration #1 chosen from 1 choice
usb 2-2: adding 2-2:1.0 (config #1, interface 0)
usb 2-2:1.0: uevent
usbhid 2-2:1.0: usb_probe_interface
usbhid 2-2:1.0: usb_probe_interface - got id
input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input5 uhci_hcd 0000:00:1d.0: reserve dev 2 ep83-INT, period 8, phase 4, 17 us
input,hidraw0: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2 usb 2-2: adding 2-2:1.1 (config #1, interface 1)
usb 2-2:1.1: uevent
usbhid 2-2:1.1: usb_probe_interface
usbhid 2-2:1.1: usb_probe_interface - got id
usb 2-2: adding 2-2:1.2 (config #1, interface 2)
usb 2-2:1.2: uevent
usbhid 2-2:1.2: usb_probe_interface
usbhid 2-2:1.2: usb_probe_interface - got id
input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.2/input/input6
sda1 sda2 sda3 sda4 sda5
uhci_hcd 0000:00:1d.0: reserve dev 2 ep84-INT, period 8, phase 4, 12 us
sd 2:0:1:0: [sda] Attached SCSI disk
sd 2:0:1:0: Attached scsi generic sg1 type 0
modprobe used greatest stack depth: 2304 bytes left
input,hidraw1: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2 drivers/usb/core/inode.c: creating file '002'
usb 2-2: New USB device found, idVendor=05ac, idProduct=021a
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: Apple Internal Keyboard / Trackpad
usb 2-2: Manufacturer: Apple Computer
hub 1-0:1.0: state 7 ports 8 chg 0000 evt fe80
hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0004
uhci_hcd 0000:00:1d.1: port 2 portsc 008a,00
hub 3-0:1.0: port 2, status 0100, change 0003, 12 Mb/s
hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100
hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0004
uhci_hcd 0000:00:1d.2: port 2 portsc 009b,00
hub 4-0:1.0: port 2, status 0101, change 0003, 12 Mb/s
hub 4-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
usb 4-2: new full speed USB device using uhci_hcd and address 2
usb 4-2: ep0 maxpacket = 8
usb 4-2: skipped 1 descriptor after interface
usb 4-2: default language 0x0409
usb 4-2: uevent
usb 4-2: usb_probe_device
usb 4-2: configuration #1 chosen from 1 choice
usb 4-2: adding 4-2:1.0 (config #1, interface 0)
usb 4-2:1.0: uevent
usbhid 4-2:1.0: usb_probe_interface
usbhid 4-2:1.0: usb_probe_interface - got id
drivers/usb/core/file.c: looking for a minor, starting at 96
hiddev96hidraw2: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2 drivers/usb/core/inode.c: creating file '002'
usb 4-2: New USB device found, idVendor=05ac, idProduct=8240
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-2: Product: IR Receiver
usb 4-2: Manufacturer: Apple Computer, Inc.
hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002
uhci_hcd 0000:00:1d.3: port 1 portsc 009b,00
hub 5-0:1.0: port 1, status 0101, change 0003, 12 Mb/s
hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
usb 5-1: new full speed USB device using uhci_hcd and address 2
usb 5-1: skipped 1 descriptor after interface
usb 5-1: skipped 1 descriptor after interface
usb 5-1: uevent
usb 5-1: usb_probe_device
usb 5-1: configuration #1 chosen from 1 choice
usb 5-1: adding 5-1:1.0 (config #1, interface 0)
usb 5-1:1.0: uevent
usbhid 5-1:1.0: usb_probe_interface
usbhid 5-1:1.0: usb_probe_interface - got id
input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input7
uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 1, phase 0, 23 us
input,hidraw3: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1
usb 5-1: adding 5-1:1.1 (config #1, interface 1)
usb 5-1:1.1: uevent
usbhid 5-1:1.1: usb_probe_interface
usbhid 5-1:1.1: usb_probe_interface - got id
input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/input/input8
input,hidraw4: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1
drivers/usb/core/inode.c: creating file '002'
usb 5-1: New USB device found, idVendor=05ac, idProduct=1000
usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002
usb usb3: suspend_rh (auto-stop)
hub 3-0:1.0: hub_suspend
usb usb3: bus auto-suspend
usb usb3: suspend_rh
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
type=1404 audit(1216428642.430:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295

SELinux: 8192 avtab hash slots, 171021 rules.
SELinux: 8192 avtab hash slots, 171021 rules.
SELinux:  8 users, 12 roles, 2347 types, 115 bools, 1 sens, 1024 cats
SELinux:  72 classes, 171021 rules
SELinux:  permission open in class dir not defined in policy
SELinux:  permission open in class file not defined in policy
SELinux:  permission open in class chr_file not defined in policy
SELinux:  permission open in class blk_file not defined in policy
SELinux:  permission open in class fifo_file not defined in policy
SELinux: the above unknown classes and permissions will be allowed
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev sda5, type ext3), uses xattr
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts

type=1403 audit(1216428643.293:3): policy loaded auid=4294967295 ses=4294967295 usb usb2: uevent
usb 2-0:1.0: uevent
usb 2-2: uevent
usb 2-2:1.0: uevent
usb 2-2:1.1: uevent
usb 2-2:1.2: uevent
usb usb3: uevent
usb 3-0:1.0: uevent
usb usb4: uevent
usb 4-0:1.0: uevent
usb 4-2: uevent
usb 4-2:1.0: uevent
usb usb5: uevent
usb 5-0:1.0: uevent
usb 5-1: uevent
usb 5-1:1.0: uevent
usb 5-1:1.1: uevent
usb usb1: uevent
usb 1-0:1.0: uevent
usb 1-4: uevent
usb 1-4:1.0: uevent
intel_rng: FWH not detected
isight_firmware 1-4:1.0: usb_probe_interface
isight_firmware 1-4:1.0: usb_probe_interface - got id
firmware: requesting isight.fw
ath5k_pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:03:00.0 to 64
ath5k_pci 0000:03:00.0: registered as 'phy0'
ath5k phy0: Device not yet supported.
ath5k_pci 0000:03:00.0: PCI INT A disabled
sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:02:00.0 to 64
sky2 0000:02:00.0: v1.21 addr 0xd8200000 irq 16 Yukon-EC (0xb6) rev 2
sky2 eth0: addr 00:17:f2:d1:e0:6f
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input9
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
iTCO_vendor_support: vendor-support=0
ath_hal: module license 'Proprietary' taints kernel.
AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
input: PC Speaker as /devices/platform/pcspkr/input/input10
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ACPI: I/O resource 0000:00:1f.3 [0xefa0-0xefbf] conflicts with ACPI region SMBI [0xefa0-0xefaf]
ACPI: Device needs an ACPI driver
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
firewire_ohci 0000:0c:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ACPI: Battery Slot [BAT0] (battery present)
ACPI: AC Adapter [ADP1] (on-line)
firewire_ohci: Added fw-ohci device 0000:0c:03.0, OHCI version 1.10
Unable to load isight firmware
appletouch 2-2:1.1: usb_probe_interface
appletouch 2-2:1.1: usb_probe_interface - got id
usbcore: registered new interface driver isight_firmware
appletouch: Geyser mode initialized.
input: appletouch as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input11
usbcore: registered new interface driver appletouch
firewire_core: created device fw0: GUID 0019e3fffe6e4c54, S800
ath_pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:03:00.0 to 64
MadWifi: ath_attach: Switching rfkill capability off.
wifi0: Atheros AR5418 chip found (MAC 12.10, PHY SChip 8.1, Radio 12.0)
ath_pci: wifi0: Atheros 5418: mem=0xd8100000, irq=17
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1b.0 to 64
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
[drm] Initialized drm 1.1.0 20060810
pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:01:00.0 to 64
[drm] Initialized radeon 1.29.0 20080528 on minor 0
[drm] Setting GART location based on new memory map
[drm] Loading R500 Microcode
[drm] Num pipes: 1
[drm] writeback test succeeded in 1 usecs
uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
appletouch: incomplete data package (first byte: 2, length: 4).
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: [email protected]
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on sda5, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda3, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 2047992k swap on /dev/sda4. Priority:-1 extents:1 across:2047992k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts IA-32 Microcode Update Driver: v1.14a <[email protected]>
firmware: requesting intel-ucode/06-0f-06
firmware: requesting intel-ucode/06-0f-06
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
warning: `dbus-daemon' uses deprecated v2 capabilities in a way that may be insecure. fuse init (API version 7.9)
SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
usb usb3: usb auto-resume
usb usb3: wakeup_rh
hub 3-0:1.0: hub_resume
hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
usb usb3: suspend_rh (auto-stop)
uhci_hcd 0000:00:1d.2: reserve dev 2 ep83-INT, period 8, phase 4, 61 us
uhci_hcd 0000:00:1d.2: release dev 2 ep83-INT, period 8, phase 4, 61 us
hub 3-0:1.0: hub_suspend
usb usb3: bus auto-suspend
usb usb3: suspend_rh
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.9
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: BNEP (Ethernet Emulation) ver 1.2
Bluetooth: BNEP filters: protocol multicast
Bridge firewalling registered
pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
[drm] Num pipes: 1
[drm] Setting GART location based on new memory map
[drm] Loading R500 Microcode
[drm] Num pipes: 1
[drm] writeback test succeeded in 1 usecs
uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
ath0: no IPv6 routers present
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
domain 1: span 0-1 level NODE
groups: 0-1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
domain 1: span 0-1 level NODE
groups: 0-1
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
domain 1: span 0-1 level NODE
groups: 0-1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
domain 1: span 0-1 level NODE
groups: 0-1
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us

it should apply cleanly to linus tree too.

please check the patch i sent out before and addon fix patch

YH

[PATCH] x86,pci: detect end_bus_number according to acpi/e820 reserved

for MacBookPro2

change the mconf bus range from [0,0xff] to to [0, 0x3f] to match range [0xf0000000, 0xf4000000) in e820 tables.

---
 arch/x86/pci/mmconfig-shared.c |   64 ++++++++++++++++++++++++++++++-----------
 1 file changed, 47 insertions(+), 17 deletions(-)

Index: linux-2.6/arch/x86/pci/mmconfig-shared.c
===================================================================
@@ -293,7 +293,7 @@ static acpi_status __init find_mboard_re
 	return AE_OK;
 }
 
-static int __init is_acpi_reserved(unsigned long start, unsigned long end)
+static int __init is_acpi_reserved(u64 start, u64 end, unsigned not_used)
 {
 	struct resource mcfg_res;
 

@@ -310,6 +310,41 @@ static int __init is_acpi_reserved(unsig
 	return mcfg_res.flags;
 }
 
+typedef int (*check_reserved_t)(u64 start, u64 end, unsigned type);
+
+static int __init is_mmconf_reserved(check_reserved_t is_reserved,
+		u64 addr, u64 size, int i,
+	        typeof(pci_mmcfg_config[0]) *cfg, int with_e820)
+{
+	u64 old_size = size;
+	int valid = 0;
+
+	while (!is_reserved(addr, addr + size - 1, E820_RESERVED)) {
+		size >>= 1;
+		if (size < (16UL<<20))
+			break;
+	}
+
+	if (size >= (16UL<<20) || size == old_size) {
+		printk(KERN_NOTICE
+		       "PCI: MCFG area at %Lx reserved in %s\n",
+			addr, with_e820?"E820":"ACPI motherboard resources");
+		valid = 1;
+
+		if (old_size != size) {
+			/* update end_bus_number */
+			cfg->end_bus_number = cfg->start_bus_number + ((size>>20) - 1);
+			printk(KERN_NOTICE "PCI: updated MCFG configuration %d: base %lx "
+			       "segment %hu buses %u - %u\n",
+			       i, (unsigned long)cfg->address, cfg->pci_segment,
+			       (unsigned int)cfg->start_bus_number,
+			       (unsigned int)cfg->end_bus_number);
+		}
+	}
+
+	return valid;
+}
+
 static void __init pci_mmcfg_reject_broken(int early)
 {
 	typeof(pci_mmcfg_config[0]) *cfg;

@@ -324,21 +359,21 @@ static void __init pci_mmcfg_reject_brok
 
 	for (i = 0; i < pci_mmcfg_config_num; i++) {
 		int valid = 0;
-		u32 size = (cfg->end_bus_number + 1) << 20;
+		u64 addr, size;
+
 		cfg = &pci_mmcfg_config[i];
+		addr = cfg->start_bus_number;
+		addr <<= 20;
+		size = cfg->end_bus_number + 1 - cfg->start_bus_number;
+		size <<= 20;
 		printk(KERN_NOTICE "PCI: MCFG configuration %d: base %lx "
 		       "segment %hu buses %u - %u\n",
 		       i, (unsigned long)cfg->address, cfg->pci_segment,
 		       (unsigned int)cfg->start_bus_number,
 		       (unsigned int)cfg->end_bus_number);
 
-		if (!early &&
-		    is_acpi_reserved(cfg->address, cfg->address + size - 1)) {
-			printk(KERN_NOTICE "PCI: MCFG area at %Lx reserved "
-			       "in ACPI motherboard resources\n",
-			       cfg->address);
-			valid = 1;
-		}
+		if (!early)
+			valid = is_mmconf_reserved(is_acpi_reserved, addr, size, i, cfg, 0);
 
 		if (valid)
 			continue;

@@ -347,16 +382,11 @@ static void __init pci_mmcfg_reject_brok
 			printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %Lx is not"
 			       " reserved in ACPI motherboard resources\n",
 			       cfg->address);
+
 		/* Don't try to do this check unless configuration
 		   type 1 is available. how about type 2 ?*/
-		if (raw_pci_ops && e820_all_mapped(cfg->address,
-						  cfg->address + size - 1,
-						  E820_RESERVED)) {
-			printk(KERN_NOTICE
-			       "PCI: MCFG area at %Lx reserved in E820\n",
-			       cfg->address);
-			valid = 1;
-		}
+		if (raw_pci_ops)
+			valid = is_mmconf_reserved(e820_all_mapped, addr, size, i, cfg, 1);
 
 		if (!valid)
 			goto reject;

[PATCH] x86,pci: detect end_bus_number according to acpi/e820 reserved

index 9297882..429c701 100644
@@ -364,6 +364,7 @@ static void __init pci_mmcfg_reject_broken(int early)
 		cfg = &pci_mmcfg_config[i];
 		addr = cfg->start_bus_number;
 		addr <<= 20;
+		addr += cfg->address;
 		size = cfg->end_bus_number + 1 - cfg->start_bus_number;
 		size <<= 20;
 		printk(KERN_NOTICE "PCI: MCFG configuration %d: base %lx "

YH,
The mmconf_end_bus_num_detect.patch and mmconf_end_bus_num_detect_fix.patch both applied
cleanly to the current linus kernel git and solve my problems with MMCONFIG not starting. I am attaching a dmesg log below of a boot with 'debug apic=verbose initcall_debug pci=routeirq'. If you look at the section immediately before the line...

pci 0000:00:1e.0: transparent bridge

you will see that it is radically different from what I posted for the freeze under PCIEASPM with MMCONFIG (using your original mmconfig patch)...

PCI: 0000:00:1f.1 reg 10 io port: [ 40d8, 40df]
PCI: 0000:00:1f.1 reg 14 io port: [ 40ec, 40ef]
PCI: 0000:00:1f.1 reg 18 io port: [ 40d0, 40d7]
PCI: 0000:00:1f.1 reg 1c io port: [ 40e8, 40eb]
PCI: 0000:00:1f.1 reg 20 io port: [ 40b0, 40bf]
pci 0000:00.1f.1: calling pci_fixup_transparent_bridge+0x0/0x2a
PCI: Found 0000:00:1f.2 [8086/27c4] 000101 00
PCI: 0000:00:1f.2 reg 10 io port: [ 40c8, 40cf]
PCI: 0000:00:1f.2 reg 14 io port: [ 40e4, 40e7]
PCI: 0000:00:1f.2 reg 18 io port: [ 40c0, 40c7]
PCI: 0000:00:1f.2 reg 1c io port: [ 40e0, 40e3]
PCI: 0000:00:1f.2 reg 20 io port: [ 40a0, 40af]
PCI: 0000:00:1f.2 reg 24 32bit mmio: [d8405000, d84053ff]
pci: 0000:00:1f.2 calling pci_fixup_transparent_bridge+0x0/0x2a
PCI: Found 0000:00:1f.3 [8086/27da] 000c05 00
PCI: 0000:00:1f.3 reg 20 io port: [ efa0, efbf]
PCI: 0000:00:1f.3: calling pci_fixup_transparent_bridge+0x0/0x2a
PCI: Fixups for bus 0000:00
PCI: Scanning behind PCI bridge 0000:00:01.0, config 010100, pass 0
PCI: Scanning bus 0000:01
PCI: Found 0000:01:00.0 [1002/71c5] 000300 00
PCI: 0000:00:01:00.0 reg 10 32bit mmio: [c0000000, cfffffff]
PCI: 0000:00:01:00.0 reg 14 io port: [ 3000, 30ff]
PCI: 0000:00:01:00.0 reg 18 32bit mmio: [d8300000, d830ffff]

Perhaps one of the PCIEASPM experts can explain why there are so many calls to pci_fixup_transparent_bridge and a scan behind the bridge. Nothing like that appears in the dmesg from your latest patch without PCIEASPM.
Jack

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.27-0.156.rc0.git4.fc9.x86_64 ([email protected]) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Fri Jul 18 22:02:40 EDT 2008 Command line: ro root=UUID=81966632-17b2-4377-929d-dc1e867e4d6d rhgb debug apic=verbose initcall_debug pci=routeirq
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bf0e9000 (usable)
BIOS-e820: 00000000bf0e9000 - 00000000bf2ea000 (ACPI NVS)
BIOS-e820: 00000000bf2ea000 - 00000000bfebe000 (ACPI data)
BIOS-e820: 00000000bfebe000 - 00000000bfeef000 (ACPI NVS)
BIOS-e820: 00000000bfeef000 - 00000000bff00000 (ACPI data)
BIOS-e820: 00000000bff00000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
last_pfn = 0xbf0e9 max_arch_pfn = 0x3ffffffff
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
init_memory_mapping
0000000000 - 00bf000000 page 2M
00bf000000 - 00bf0e9000 page 4k
kernel direct mapping tables up to bf0e9000 @ 8000-d000
last_map_addr: bf0e9000 end: bf0e9000
RAMDISK: 37d35000 - 37fef5d1
DMI 2.4 present.
ACPI: RSDP 000FE020, 0024 (r2 APPLE )
ACPI: XSDT BFEFD1C0, 0074 (r1 APPLE Apple00 A5 1000013)
ACPI: FACP BFEFB000, 00F4 (r3 APPLE Apple00 A5 Loki 5F)
ACPI: DSDT BFEF0000, 48BD (r1 APPLE MacBookP 20001 INTL 20050309)
ACPI: FACS BFEC0000, 0040
ACPI: HPET BFEFA000, 0038 (r1 APPLE Apple00 1 Loki 5F)
ACPI: APIC BFEF9000, 0068 (r1 APPLE Apple00 1 Loki 5F)
ACPI: MCFG BFEF8000, 003C (r1 APPLE Apple00 1 Loki 5F)
ACPI: ASF! BFEF7000, 00A0 (r32 APPLE Apple00 1 Loki 5F)
ACPI: SBST BFEF6000, 0030 (r1 APPLE Apple00 1 Loki 5F)
ACPI: ECDT BFEF5000, 0053 (r1 APPLE Apple00 1 Loki 5F)
ACPI: SSDT BFEEF000, 04DC (r1 APPLE CpuPm 3000 INTL 20050309)
ACPI: SSDT BFEBD000, 064F (r1 SataRe SataPri 1000 INTL 20050309)
ACPI: SSDT BFEBC000, 069C (r1 SataRe SataSec 1000 INTL 20050309)
ACPI: DMI detected: Apple
No NUMA configuration found
Faking a node at 0000000000000000-00000000bf0e9000
Entering add_active_range(0, 0x0, 0x9f) 0 entries of 25600 used
Entering add_active_range(0, 0x100, 0xbf0e9) 1 entries of 25600 used
Bootmem setup node 0 0000000000000000-00000000bf0e9000
NODE_DATA [000000000000b000 - 000000000001ffff]
bootmap [0000000000020000 - 0000000000037e1f] pages 18
(6 early reservations) ==> bootmem
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0000200000 - 0000e5fe68] TEXT DATA BSS ==> [0000200000 - 0000e5fe68]
#3 [0037d35000 - 0037fef5d1] RAMDISK ==> [0037d35000 - 0037fef5d1]
#4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#5 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000]
Scan SMP from ffff880000000000 for 1024 bytes.
Scan SMP from ffff88000009fc00 for 1024 bytes.
Scan SMP from ffff8800000f0000 for 65536 bytes.
Scan SMP from ffff88000009fc00 for 1024 bytes.
[ffffe20000000000-ffffe200047fffff] PMD -> [ffff880001200000-ffff8800059fffff] on node 0
Zone PFN ranges:

  DMA      0x00000000 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x000bf0e9

On node 0 totalpages: 782472
DMA zone: 96 pages used for memmap
DMA zone: 3269 pages reserved
DMA zone: 634 pages, LIFO batch:0
DMA32 zone: 18246 pages used for memmap
DMA32 zone: 760227 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
mapped APIC to ffffffffff5fc000 ( fee00000)
mapped IOAPIC to ffffffffff5fb000 (00000000fec00000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at c4000000 (gap: c0000000:30000000)
PERCPU: Allocating 442304 bytes of per cpu data
NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 760861
Policy zone: DMA32
Kernel command line: ro root=UUID=81966632-17b2-4377-929d-dc1e867e4d6d rhgb debug apic=verbose initcall_debug pci=routeirq Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
TSC calibrated against PM_TIMER
Detected 2327.490 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES: 8
... MAX_LOCK_DEPTH: 48
... MAX_LOCKDEP_KEYS: 2048
... CLASSHASH_SIZE: 1024

... MAX_LOCKDEP_ENTRIES:     8192
... MAX_LOCKDEP_CHAINS:      16384
... CHAINHASH_SIZE:          8192

memory used by lock dependency info: 1840 kB
per task-struct memory footprint: 3456 bytes
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3039268k/3130276k available (3099k kernel code, 90620k reserved, 1746k data, 1544k init)
CPA: page pool initialized 48 of 48 pages preallocated
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
hpet clockevent registered
Calibrating delay loop (skipped), value calculated using timer frequency.. <6>4654.98 BogoMIPS (lpj=2327490) Security Framework initialized

SELinux:  Initializing.
SELinux:  Starting in permissive mode
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256

Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20080609
enabled ExtINT on CPU#0
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 1-0 not connected.
IOAPIC[0]: Set routing entry (1-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) IOAPIC[0]: Set routing entry (1-2 -> 0x30 -> IRQ 0 Mode:0 Active:0) IOAPIC[0]: Set routing entry (1-3 -> 0x33 -> IRQ 3 Mode:0 Active:0) IOAPIC[0]: Set routing entry (1-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) IOAPIC[0]: Set routing entry (1-5 -> 0x35 -> IRQ 5 Mode:0 Active:0) IOAPIC[0]: Set routing entry (1-6 -> 0x36 -> IRQ 6 Mode:0 Active:0) IOAPIC[0]: Set routing entry (1-7 -> 0x37 -> IRQ 7 Mode:0 Active:0) IOAPIC[0]: Set routing entry (1-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) IOAPIC[0]: Set routing entry (1-9 -> 0x39 -> IRQ 9 Mode:1 Active:0) IOAPIC[0]: Set routing entry (1-10 -> 0x3a -> IRQ 10 Mode:0 Active:0) IOAPIC[0]: Set routing entry (1-11 -> 0x3b -> IRQ 11 Mode:0 Active:0) IOAPIC[0]: Set routing entry (1-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) IOAPIC[0]: Set routing entry (1-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) IOAPIC[0]: Set routing entry (1-14 -> 0x3e -> IRQ 14 Mode:0 Active:0) IOAPIC[0]: Set routing entry (1-15 -> 0x3f -> IRQ 15 Mode:0 Active:0)
IO-APIC (apicid-pin) 1-16, 1-17, 1-18, 1-19, 1-20, 1-21, 1-22, 1-23 not connected.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz stepping 06
Using local APIC timer interrupts.
APIC timer calibration result 10390580
Detected 10.390 MHz APIC timer.
lockdep: fixing up alternatives.
Booting processor 1/1 ip 6000
Initializing CPU#1
masked ExtINT on CPU#1
Calibrating delay using timer specific routine.. <6>4654.79 BogoMIPS (lpj=2327398)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (9309.77 BogoMIPS).
sizeof(vma)=176 bytes
sizeof(page)=96 bytes
sizeof(inode)=1088 bytes
sizeof(dentry)=256 bytes
sizeof(ext3inode)=1488 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=9528 bytes
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
domain 1: span 0-1 level NODE
groups: 0-1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
domain 1: span 0-1 level NODE
groups: 0-1
khelper used greatest stack depth: 5648 bytes left
calling init_cpufreq_transition_notifier_list+0x0/0x20
initcall init_cpufreq_transition_notifier_list+0x0/0x20 returned 0 after 0 msecs calling net_ns_init+0x0/0x134
net_namespace: 1352 bytes
initcall net_ns_init+0x0/0x134 returned 0 after 0 msecs
calling cpufreq_tsc+0x0/0x16
initcall cpufreq_tsc+0x0/0x16 returned 0 after 0 msecs
calling init_smp_flush+0x0/0x6b
initcall init_smp_flush+0x0/0x6b returned 0 after 0 msecs
calling print_banner+0x0/0x13
Booting paravirtualized kernel on bare hardware
initcall print_banner+0x0/0x13 returned 0 after 0 msecs
calling sysctl_init+0x0/0x37
initcall sysctl_init+0x0/0x37 returned 0 after 0 msecs
calling ksysfs_init+0x0/0xc0
initcall ksysfs_init+0x0/0xc0 returned 0 after 0 msecs
calling init_jiffies_clocksource+0x0/0x17
initcall init_jiffies_clocksource+0x0/0x17 returned 0 after 0 msecs calling pm_init+0x0/0x39
initcall pm_init+0x0/0x39 returned 0 after 0 msecs
calling pm_disk_init+0x0/0x1e
initcall pm_disk_init+0x0/0x1e returned 0 after 0 msecs
calling swsusp_header_init+0x0/0x31
initcall swsusp_header_init+0x0/0x31 returned 0 after 0 msecs
calling ftrace_dynamic_init+0x0/0xd7
initcall ftrace_dynamic_init+0x0/0xd7 returned 0 after 0 msecs
calling filelock_init+0x0/0x33
initcall filelock_init+0x0/0x33 returned 0 after 0 msecs
calling init_misc_binfmt+0x0/0x44
initcall init_misc_binfmt+0x0/0x44 returned 0 after 0 msecs
calling init_script_binfmt+0x0/0x17
initcall init_script_binfmt+0x0/0x17 returned 0 after 0 msecs
calling init_elf_binfmt+0x0/0x17
initcall init_elf_binfmt+0x0/0x17 returned 0 after 0 msecs
calling init_compat_elf_binfmt+0x0/0x17
initcall init_compat_elf_binfmt+0x0/0x17 returned 0 after 0 msecs calling debugfs_init+0x0/0x56
initcall debugfs_init+0x0/0x56 returned 0 after 0 msecs
calling securityfs_init+0x0/0x56
initcall securityfs_init+0x0/0x56 returned 0 after 0 msecs
calling random32_init+0x0/0x5f
initcall random32_init+0x0/0x5f returned 0 after 0 msecs
calling early_resume_init+0x0/0x1d4
Time: 3:06:17 Date: 07/19/08
initcall early_resume_init+0x0/0x1d4 returned 0 after 0 msecs
calling cpufreq_core_init+0x0/0x8f
initcall cpufreq_core_init+0x0/0x8f returned 0 after 0 msecs
calling cpuidle_init+0x0/0x45
initcall cpuidle_init+0x0/0x45 returned 0 after 0 msecs
calling sock_init+0x0/0x63
initcall sock_init+0x0/0x63 returned 0 after 0 msecs
calling netpoll_init+0x0/0x46
initcall netpoll_init+0x0/0x46 returned 0 after 0 msecs
calling netlink_proto_init+0x0/0x150
NET: Registered protocol family 16
initcall netlink_proto_init+0x0/0x150 returned 0 after 0 msecs
calling bdi_class_init+0x0/0x42
initcall bdi_class_init+0x0/0x42 returned 0 after 0 msecs
calling kobject_uevent_init+0x0/0x47
initcall kobject_uevent_init+0x0/0x47 returned 0 after 0 msecs
calling pcibus_class_init+0x0/0x17
initcall pcibus_class_init+0x0/0x17 returned 0 after 0 msecs
calling pci_driver_init+0x0/0x17
initcall pci_driver_init+0x0/0x17 returned 0 after 0 msecs
calling backlight_class_init+0x0/0x4e
initcall backlight_class_init+0x0/0x4e returned 0 after 0 msecs calling dock_init+0x0/0x5f
No dock devices found.
initcall dock_init+0x0/0x5f returned 0 after 0 msecs
calling tty_class_init+0x0/0x2f
initcall tty_class_init+0x0/0x2f returned 0 after 0 msecs
calling vtconsole_class_init+0x0/0xbf
khelper used greatest stack depth: 4904 bytes left
initcall vtconsole_class_init+0x0/0xbf returned 0 after 0 msecs calling register_node_type+0x0/0x83
initcall register_node_type+0x0/0x83 returned 0 after 0 msecs
calling enable_pci_io_ecs+0x0/0x33
initcall enable_pci_io_ecs+0x0/0x33 returned 0 after 0 msecs
calling early_fill_mp_bus_info+0x0/0x80c
initcall early_fill_mp_bus_info+0x0/0x80c returned 0 after 0 msecs calling arch_kdebugfs_init+0x0/0x1e0
initcall arch_kdebugfs_init+0x0/0x1e0 returned 0 after 0 msecs
calling mtrr_if_init+0x0/0x7e
initcall mtrr_if_init+0x0/0x7e returned 0 after 0 msecs
calling ffh_cstate_init+0x0/0x36
initcall ffh_cstate_init+0x0/0x36 returned 0 after 0 msecs
calling acpi_pci_init+0x0/0x45
ACPI: bus type pci registered
initcall acpi_pci_init+0x0/0x45 returned 0 after 0 msecs
calling init_acpi_device_notify+0x0/0x50
initcall init_acpi_device_notify+0x0/0x50 returned 0 after 0 msecs calling dmi_id_init+0x0/0x2f1
initcall dmi_id_init+0x0/0x2f1 returned 0 after 0 msecs
calling pci_arch_init+0x0/0x53
PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255
PCI: MCFG area at f0000000 reserved in E820
PCI: updated MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
PCI: Using MMCONFIG at f0000000 - f3ffffff
PCI: Using configuration type 1 for base access
initcall pci_arch_init+0x0/0x53 returned 0 after 14 msecs
calling topology_init+0x0/0x96
initcall topology_init+0x0/0x96 returned 0 after 0 msecs
calling mtrr_init_finialize+0x0/0x42
initcall mtrr_init_finialize+0x0/0x42 returned 0 after 0 msecs
calling param_sysfs_init+0x0/0x1f3
initcall param_sysfs_init+0x0/0x1f3 returned 0 after 9 msecs
calling pm_sysrq_init+0x0/0x1e
initcall pm_sysrq_init+0x0/0x1e returned 0 after 0 msecs
calling readahead_init+0x0/0x3d
initcall readahead_init+0x0/0x3d returned 0 after 0 msecs
calling init_bio+0x0/0xca
initcall init_bio+0x0/0xca returned 0 after 0 msecs
calling integrity_init+0x0/0x3f
initcall integrity_init+0x0/0x3f returned 0 after 0 msecs
calling blk_settings_init+0x0/0x2f
initcall blk_settings_init+0x0/0x2f returned 0 after 0 msecs
calling blk_ioc_init+0x0/0x2f
initcall blk_ioc_init+0x0/0x2f returned 0 after 0 msecs
calling genhd_device_init+0x0/0x5a
initcall genhd_device_init+0x0/0x5a returned 0 after 0 msecs
calling blk_dev_integrity_init+0x0/0x2f
initcall blk_dev_integrity_init+0x0/0x2f returned 0 after 0 msecs calling pci_slot_init+0x0/0x4c
initcall pci_slot_init+0x0/0x4c returned 0 after 0 msecs
calling fbmem_init+0x0/0x8f
initcall fbmem_init+0x0/0x8f returned 0 after 0 msecs
calling acpi_init+0x0/0x226
ACPI: EC: EC description table is found, configuring boot EC
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: BIOS _OSI(Linux) query ignored via DMI
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
initcall acpi_init+0x0/0x226 returned 0 after 25 msecs
calling acpi_scan_init+0x0/0x10f
initcall acpi_scan_init+0x0/0x10f returned 0 after 52 msecs
calling acpi_ec_init+0x0/0x66
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
initcall acpi_ec_init+0x0/0x66 returned 0 after 0 msecs
calling acpi_pci_root_init+0x0/0x2d
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
PCI: 0000:00:07.0 reg 10 32bit mmio: [d8404000, d8404fff]
PCI: 0000:00:1b.0 reg 10 64bit mmio: [d8400000, d8403fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
PCI: 0000:00:1d.0 reg 20 io port: [4080, 409f]
PCI: 0000:00:1d.1 reg 20 io port: [4060, 407f]
PCI: 0000:00:1d.2 reg 20 io port: [4040, 405f]
PCI: 0000:00:1d.3 reg 20 io port: [4020, 403f]
PCI: 0000:00:1d.7 reg 10 32bit mmio: [d8405400, d84057ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
PCI: 0000:00:1f.1 reg 10 io port: [40d8, 40df]
PCI: 0000:00:1f.1 reg 14 io port: [40ec, 40ef]
PCI: 0000:00:1f.1 reg 18 io port: [40d0, 40d7]
PCI: 0000:00:1f.1 reg 1c io port: [40e8, 40eb]
PCI: 0000:00:1f.1 reg 20 io port: [40b0, 40bf]
PCI: 0000:00:1f.2 reg 10 io port: [40c8, 40cf]
PCI: 0000:00:1f.2 reg 14 io port: [40e4, 40e7]
PCI: 0000:00:1f.2 reg 18 io port: [40c0, 40c7]
PCI: 0000:00:1f.2 reg 1c io port: [40e0, 40e3]
PCI: 0000:00:1f.2 reg 20 io port: [40a0, 40af]
PCI: 0000:00:1f.2 reg 24 32bit mmio: [d8405000, d84053ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
PCI: 0000:00:1f.3 reg 20 io port: [efa0, efbf]
PCI: 0000:01:00.0 reg 10 32bit mmio: [c0000000, cfffffff]
PCI: 0000:01:00.0 reg 14 io port: [3000, 30ff]
PCI: 0000:01:00.0 reg 18 32bit mmio: [d8300000, d830ffff]
pci 0000:01:00.0: supports D1
pci 0000:01:00.0: supports D2
PCI: bridge 0000:00:01.0 io port: [3000, 3fff]
PCI: bridge 0000:00:01.0 32bit mmio: [d8300000, d83fffff]
PCI: bridge 0000:00:01.0 64bit mmio pref: [c0000000, cfffffff]
PCI: 0000:02:00.0 reg 10 64bit mmio: [d8200000, d8203fff]
PCI: 0000:02:00.0 reg 18 io port: [2000, 20ff]
pci 0000:02:00.0: supports D1
pci 0000:02:00.0: supports D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
PCI: bridge 0000:00:1c.0 io port: [2000, 2fff]
PCI: bridge 0000:00:1c.0 32bit mmio: [d8200000, d82fffff]
PCI: 0000:03:00.0 reg 10 64bit mmio: [d8100000, d810ffff]
pci 0000:03:00.0: supports D1
pci 0000:03:00.0: PME# supported from D0 D1 D3hot
pci 0000:03:00.0: PME# disabled
PCI: bridge 0000:00:1c.1 32bit mmio: [d8100000, d81fffff]
PCI: bridge 0000:00:1c.2 io port: [1000, 1fff]
PCI: bridge 0000:00:1c.2 32bit mmio: [d4100000, d80fffff]
PCI: bridge 0000:00:1c.2 64bit mmio pref: [d0000000, d3ffffff]
PCI: 0000:0c:03.0 reg 10 32bit mmio: [d4004000, d40047ff]
PCI: 0000:0c:03.0 reg 14 32bit mmio: [d4000000, d4003fff]
pci 0000:0c:03.0: supports D1
pci 0000:0c:03.0: supports D2
pci 0000:0c:03.0: PME# supported from D0 D1 D2 D3hot
pci 0000:0c:03.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
PCI: bridge 0000:00:1e.0 32bit mmio: [d4000000, d40fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
initcall acpi_pci_root_init+0x0/0x2d returned 0 after 78 msecs
calling acpi_pci_link_init+0x0/0x4d
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
initcall acpi_pci_link_init+0x0/0x4d returned 0 after 14 msecs
calling acpi_power_init+0x0/0x7c
initcall acpi_power_init+0x0/0x7c returned 0 after 0 msecs
calling acpi_system_init+0x0/0x265
initcall acpi_system_init+0x0/0x265 returned 0 after 0 msecs
calling acpi_cm_sbs_init+0x0/0xd
initcall acpi_cm_sbs_init+0x0/0xd returned 0 after 0 msecs
calling pnp_init+0x0/0x25
Linux Plug and Play Support v0.97 (c) Adam Belay
initcall pnp_init+0x0/0x25 returned 0 after 0 msecs
calling pnpacpi_init+0x0/0x91
pnp: PnP ACPI init
ACPI: bus type pnp registered
IOAPIC[0]: Set routing entry (1-6 -> 0x36 -> IRQ 6 Mode:0 Active:0) IOAPIC[0]: Set routing entry (1-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) IOAPIC[0]: Set routing entry (1-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
initcall pnpacpi_init+0x0/0x91 returned 0 after 20 msecs
calling misc_init+0x0/0x9d
initcall misc_init+0x0/0x9d returned 0 after 0 msecs
calling cn_init+0x0/0xf3
initcall cn_init+0x0/0xf3 returned 0 after 0 msecs
calling init_scsi+0x0/0x96
SCSI subsystem initialized
initcall init_scsi+0x0/0x96 returned 0 after 1 msecs
calling ata_init+0x0/0x368
libata version 3.00 loaded.
initcall ata_init+0x0/0x368 returned 0 after 0 msecs
calling init_pcmcia_cs+0x0/0x2d
initcall init_pcmcia_cs+0x0/0x2d returned 0 after 0 msecs
calling usb_init+0x0/0x131
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
initcall usb_init+0x0/0x131 returned 0 after 1 msecs
calling serio_init+0x0/0x8e
initcall serio_init+0x0/0x8e returned 0 after 0 msecs
calling input_init+0x0/0x10c
initcall input_init+0x0/0x10c returned 0 after 0 msecs
calling rtc_init+0x0/0x75
initcall rtc_init+0x0/0x75 returned 0 after 0 msecs
calling power_supply_class_init+0x0/0x39
initcall power_supply_class_init+0x0/0x39 returned 0 after 0 msecs calling thermal_init+0x0/0x56
initcall thermal_init+0x0/0x56 returned 0 after 0 msecs
calling md_init+0x0/0xd5
initcall md_init+0x0/0xd5 returned 0 after 0 msecs
calling leds_init+0x0/0x2f
initcall leds_init+0x0/0x2f returned 0 after 0 msecs
calling dma_bus_init+0x0/0x31
initcall dma_bus_init+0x0/0x31 returned 0 after 0 msecs
calling pci_subsys_init+0x0/0x126
PCI: Using ACPI for IRQ routing
PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified IOAPIC[0]: Set routing entry (1-16 -> 0x49 -> IRQ 16 Mode:1 Active:1) pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 IOAPIC[0]: Set routing entry (1-22 -> 0x51 -> IRQ 22 Mode:1 Active:1) pci 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 IOAPIC[0]: Set routing entry (1-17 -> 0x59 -> IRQ 17 Mode:1 Active:1) pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 IOAPIC[0]: Set routing entry (1-18 -> 0x61 -> IRQ 18 Mode:1 Active:1) pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 IOAPIC[0]: Set routing entry (1-23 -> 0x69 -> IRQ 23 Mode:1 Active:1) pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 IOAPIC[0]: Set routing entry (1-19 -> 0x71 -> IRQ 19 Mode:1 Active:1) pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:0c:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
number of MP IRQ sources: 15.
number of IO-APIC #1 registers: 24.
testing the IO APIC.......................

IO APIC #1......
.... register #00: 00000000
....... : physical APIC id: 00
.... register #01: 00170020

.......     : max redirection entries: 0017
.......     : PRQ implemented: 0
.......     : IO APIC version: 0020

.... register #02: 00170020
....... : arbitration: 00
.... IRQ redirection table:
NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:

 00 000 1    0    0   0   0    0    0    00
 01 003 0    0    0   0   0    1    1    31
 02 003 0    0    0   0   0    1    1    30
 03 003 0    0    0   0   0    1    1    33
 04 003 0    0    0   0   0    1    1    34
 05 003 0    0    0   0   0    1    1    35
 06 003 0    0    0   0   0    1    1    36
 07 003 0    0    0   0   0    1    1    37
 08 003 0    0    0   0   0    1    1    38
 09 003 0    1    0   0   0    1    1    39
 0a 003 0    0    0   0   0    1    1    3A
 0b 003 0    0    0   0   0    1    1    3B
 0c 003 0    0    0   0   0    1    1    3C
 0d 003 0    0    0   0   0    1    1    3D
 0e 003 0    0    0   0   0    1    1    3E
 0f 003 0    0    0   0   0    1    1    3F
 10 003 1    1    0   1   0    1    1    49
 11 003 1    1    0   1   0    1    1    59
 12 003 1    1    0   1   0    1    1    61
 13 003 1    1    0   1   0    1    1    71
 14 000 1    0    0   0   0    0    0    00
 15 000 1    0    0   0   0    0    0    00
 16 003 1    1    0   1   0    1    1    51
 17 003 1    1    0   1   0    1    1    69

IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ22 -> 0:22
IRQ23 -> 0:23
.................................... done.
initcall pci_subsys_init+0x0/0x126 returned 0 after 21 msecs calling proto_init+0x0/0x33
initcall proto_init+0x0/0x33 returned 0 after 0 msecs calling net_dev_init+0x0/0x1f3
initcall net_dev_init+0x0/0x1f3 returned 0 after 0 msecs calling neigh_init+0x0/0x76
initcall neigh_init+0x0/0x76 returned 0 after 0 msecs calling fib_rules_init+0x0/0xab
initcall fib_rules_init+0x0/0xab returned 0 after 0 msecs calling pktsched_init+0x0/0xc9
initcall pktsched_init+0x0/0xc9 returned 0 after 0 msecs calling tc_filter_init+0x0/0x51
initcall tc_filter_init+0x0/0x51 returned 0 after 0 msecs calling tc_action_init+0x0/0x51
initcall tc_action_init+0x0/0x51 returned 0 after 0 msecs calling genl_init+0x0/0xdd
initcall genl_init+0x0/0xdd returned 0 after 3 msecs calling cipso_v4_init+0x0/0x8d
initcall cipso_v4_init+0x0/0x8d returned 0 after 0 msecs calling wireless_nlevent_init+0x0/0x46
initcall wireless_nlevent_init+0x0/0x46 returned 0 after 0 msecs calling netlbl_init+0x0/0x86

NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default

initcall netlbl_init+0x0/0x86 returned 0 after 0 msecs calling sysctl_init+0x0/0x32
initcall sysctl_init+0x0/0x32 returned 0 after 0 msecs calling pci_iommu_init+0x0/0x21
PCI-GART: No AMD northbridge found.
initcall pci_iommu_init+0x0/0x21 returned 0 after 0 msecs calling hpet_late_init+0x0/0x107
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
initcall hpet_late_init+0x0/0x107 returned 0 after 1 msecs calling clocksource_done_booting+0x0/0x17
initcall clocksource_done_booting+0x0/0x17 returned 0 after 0 msecs calling ftrace_init_debugfs+0x0/0xfd
initcall ftrace_init_debugfs+0x0/0xfd returned 0 after 0 msecs calling tracer_alloc_buffers+0x0/0x5a1
tracer: 1286 pages allocated for 65536 entries of 80 bytes
actual entries 65586
initcall tracer_alloc_buffers+0x0/0x5a1 returned 0 after 19 msecs calling init_pipe_fs+0x0/0x51
initcall init_pipe_fs+0x0/0x51 returned 0 after 0 msecs calling init_mnt_writers+0x0/0x95
initcall init_mnt_writers+0x0/0x95 returned 0 after 0 msecs calling eventpoll_init+0x0/0x9a
initcall eventpoll_init+0x0/0x9a returned 0 after 0 msecs calling anon_inode_init+0x0/0x11c
initcall anon_inode_init+0x0/0x11c returned 0 after 0 msecs calling acpi_rtc_init+0x0/0xf9
ACPI: RTC can wake from S4
initcall acpi_rtc_init+0x0/0xf9 returned 0 after 0 msecs calling acpi_event_init+0x0/0x85
initcall acpi_event_init+0x0/0x85 returned 0 after 2 msecs calling pnp_system_init+0x0/0x17
system 00:01: iomem range 0xf0000000-0xf3ffffff could not be reserved system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved system 00:05: iomem range 0xfed00000-0xfed003ff has been reserved system 00:07: ioport range 0x680-0x6ef has been reserved system 00:07: ioport range 0x800-0x80f has been reserved system 00:07: ioport range 0x810-0x817 has been reserved system 00:07: ioport range 0x400-0x47f has been reserved system 00:07: ioport range 0x500-0x53f has been reserved system 00:07: ioport range 0x1640-0x164f has been reserved initcall pnp_system_init+0x0/0x17 returned 0 after 2 msecs calling chr_dev_init+0x0/0x9d
initcall chr_dev_init+0x0/0x9d returned 0 after 2 msecs calling firmware_class_init+0x0/0x77
initcall firmware_class_init+0x0/0x77 returned 0 after 0 msecs calling loopback_init+0x0/0x17
initcall loopback_init+0x0/0x17 returned 0 after 1 msecs calling init_pcmcia_bus+0x0/0x89
initcall init_pcmcia_bus+0x0/0x89 returned 0 after 0 msecs calling cpufreq_gov_performance_init+0x0/0x17
initcall cpufreq_gov_performance_init+0x0/0x17 returned 0 after 0 msecs calling cpufreq_gov_userspace_init+0x0/0x17
initcall cpufreq_gov_userspace_init+0x0/0x17 returned 0 after 0 msecs calling init_acpi_pm_clocksource+0x0/0xae
initcall init_acpi_pm_clocksource+0x0/0xae returned 0 after 0 msecs calling pcibios_assign_resources+0x0/0x8d
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01

pci 0000:00:01.0:   IO window: 0x3000-0x3fff
pci 0000:00:01.0:   MEM window: 0xd8300000-0xd83fffff
pci 0000:00:01.0:   PREFETCH window: 0x000000c0000000-0x000000cfffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0:   IO window: 0x2000-0x2fff
pci 0000:00:1c.0:   MEM window: 0xd8200000-0xd82fffff
pci 0000:00:1c.0:   PREFETCH window: 0x000000d8500000-0x000000d85fffff
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.1:   IO window: disabled
pci 0000:00:1c.1:   MEM window: 0xd8100000-0xd81fffff
pci 0000:00:1c.1:   PREFETCH window: disabled
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
pci 0000:00:1c.2:   IO window: 0x1000-0x1fff
pci 0000:00:1c.2:   MEM window: 0xd4100000-0xd80fffff
pci 0000:00:1c.2:   PREFETCH window: 0x000000d0000000-0x000000d3ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0c
pci 0000:00:1e.0:   IO window: disabled
pci 0000:00:1e.0:   MEM window: 0xd4000000-0xd40fffff
pci 0000:00:1e.0:   PREFETCH window: disabled

pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.0 to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.1 to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.2 to 64
pci 0000:00:1e.0: power state changed by ACPI to D0
PCI: Setting latency timer of device 0000:00:1e.0 to 64
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffffffffffff]
bus: 01 index 0 io port: [3000, 3fff]
bus: 01 index 1 mmio: [d8300000, d83fffff]
bus: 01 index 2 mmio: [c0000000, cfffffff]
bus: 01 index 3 mmio: [0, 0]
bus: 02 index 0 io port: [2000, 2fff]
bus: 02 index 1 mmio: [d8200000, d82fffff]
bus: 02 index 2 mmio: [d8500000, d85fffff]
bus: 02 index 3 mmio: [0, 0]
bus: 03 index 0 mmio: [0, 0]
bus: 03 index 1 mmio: [d8100000, d81fffff]
bus: 03 index 2 mmio: [0, 0]
bus: 03 index 3 mmio: [0, 0]
bus: 04 index 0 io port: [1000, 1fff]
bus: 04 index 1 mmio: [d4100000, d80fffff]
bus: 04 index 2 mmio: [d0000000, d3ffffff]
bus: 04 index 3 mmio: [0, 0]
bus: 0c index 0 mmio: [0, 0]
bus: 0c index 1 mmio: [d4000000, d40fffff]
bus: 0c index 2 mmio: [0, 0]
bus: 0c index 3 io port: [0, ffff]
bus: 0c index 4 mmio: [0, ffffffffffffffff]
initcall pcibios_assign_resources+0x0/0x8d returned 0 after 10 msecs
calling inet_init+0x0/0x354
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 10, 4194304 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
initcall inet_init+0x0/0x354 returned 0 after 39 msecs
calling af_unix_init+0x0/0x5a
NET: Registered protocol family 1
initcall af_unix_init+0x0/0x5a returned 0 after 0 msecs
calling populate_rootfs+0x0/0xf3
checking if image is initramfs... it is
debug: unmapping init memory ffff880037d35000..ffff880037ff0000
initcall populate_rootfs+0x0/0xf3 returned 0 after 262 msecs
calling calgary_fixup_tce_spaces+0x0/0xfe
initcall calgary_fixup_tce_spaces+0x0/0xfe returned -19 after 0 msecs
calling i8259A_init_sysfs+0x0/0x27
initcall i8259A_init_sysfs+0x0/0x27 returned 0 after 0 msecs
calling vsyscall_init+0x0/0x71
initcall vsyscall_init+0x0/0x71 returned 0 after 0 msecs
calling sbf_init+0x0/0xf4
initcall sbf_init+0x0/0xf4 returned 0 after 0 msecs
calling i8237A_init_sysfs+0x0/0x27
initcall i8237A_init_sysfs+0x0/0x27 returned 0 after 0 msecs
calling add_rtc_cmos+0x0/0x1d
initcall add_rtc_cmos+0x0/0x1d returned 0 after 0 msecs
calling cache_sysfs_init+0x0/0x62
initcall cache_sysfs_init+0x0/0x62 returned 0 after 2 msecs
calling mce_init_device+0x0/0x8a
initcall mce_init_device+0x0/0x8a returned 0 after 1 msecs
calling periodic_mcheck_init+0x0/0x44
initcall periodic_mcheck_init+0x0/0x44 returned 0 after 0 msecs
calling thermal_throttle_init_device+0x0/0x92
initcall thermal_throttle_init_device+0x0/0x92 returned 0 after 0 msecs
calling threshold_init_device+0x0/0x4e
initcall threshold_init_device+0x0/0x4e returned 0 after 0 msecs
calling msr_init+0x0/0x124
initcall msr_init+0x0/0x124 returned 0 after 0 msecs
calling cpuid_init+0x0/0x124
initcall cpuid_init+0x0/0x124 returned 0 after 0 msecs
calling init_lapic_sysfs+0x0/0x32
initcall init_lapic_sysfs+0x0/0x32 returned 0 after 0 msecs
calling ioapic_init_sysfs+0x0/0xac
initcall ioapic_init_sysfs+0x0/0xac returned 0 after 0 msecs
calling add_pcspkr+0x0/0x45
initcall add_pcspkr+0x0/0x45 returned 0 after 0 msecs
calling uv_ptc_init+0x0/0x7a
initcall uv_ptc_init+0x0/0x7a returned 0 after 0 msecs
calling uv_bau_init+0x0/0x604
initcall uv_bau_init+0x0/0x604 returned 0 after 0 msecs
calling audit_classes_init+0x0/0xb4
initcall audit_classes_init+0x0/0xb4 returned 0 after 0 msecs
calling debug_pagealloc_proc_init+0x0/0x30
initcall debug_pagealloc_proc_init+0x0/0x30 returned 0 after 0 msecs
calling pt_dump_init+0x0/0x30
initcall pt_dump_init+0x0/0x30 returned 0 after 0 msecs
calling init_vdso_vars+0x0/0x219
initcall init_vdso_vars+0x0/0x219 returned 0 after 0 msecs
calling ia32_binfmt_init+0x0/0x19
initcall ia32_binfmt_init+0x0/0x19 returned 0 after 0 msecs
calling sysenter_setup+0x0/0x2ad
initcall sysenter_setup+0x0/0x2ad returned 0 after 0 msecs
calling init_sched_debug_procfs+0x0/0x2c
initcall init_sched_debug_procfs+0x0/0x2c returned 0 after 0 msecs
calling create_proc_profile+0x0/0x2cf
initcall create_proc_profile+0x0/0x2cf returned 0 after 0 msecs
calling ioresources_init+0x0/0x41
initcall ioresources_init+0x0/0x41 returned 0 after 0 msecs
calling uid_cache_init+0x0/0x92
initcall uid_cache_init+0x0/0x92 returned 0 after 0 msecs
calling init_posix_timers+0x0/0xa0
initcall init_posix_timers+0x0/0xa0 returned 0 after 0 msecs
calling init_posix_cpu_timers+0x0/0xb5
initcall init_posix_cpu_timers+0x0/0xb5 returned 0 after 0 msecs
calling nsproxy_cache_init+0x0/0x32
initcall nsproxy_cache_init+0x0/0x32 returned 0 after 0 msecs
calling timekeeping_init_device+0x0/0x27
initcall timekeeping_init_device+0x0/0x27 returned 0 after 0 msecs
calling init_clocksource_sysfs+0x0/0x55
initcall init_clocksource_sysfs+0x0/0x55 returned 0 after 0 msecs
calling init_timer_list_procfs+0x0/0x31
initcall init_timer_list_procfs+0x0/0x31 returned 0 after 0 msecs
calling init_tstats_procfs+0x0/0x31
initcall init_tstats_procfs+0x0/0x31 returned 0 after 0 msecs
calling lockdep_proc_init+0x0/0x7c
initcall lockdep_proc_init+0x0/0x7c returned 0 after 0 msecs
calling futex_init+0x0/0xcc
initcall futex_init+0x0/0xcc returned 0 after 0 msecs
calling proc_dma_init+0x0/0x27
initcall proc_dma_init+0x0/0x27 returned 0 after 0 msecs
calling percpu_modinit+0x0/0x79
initcall percpu_modinit+0x0/0x79 returned 0 after 0 msecs
calling kallsyms_init+0x0/0x2a
initcall kallsyms_init+0x0/0x2a returned 0 after 0 msecs
calling snapshot_device_init+0x0/0x17
initcall snapshot_device_init+0x0/0x17 returned 0 after 0 msecs
calling crash_save_vmcoreinfo_init+0x0/0x430
initcall crash_save_vmcoreinfo_init+0x0/0x430 returned 0 after 0 msecs
calling crash_notes_memory_init+0x0/0x44
initcall crash_notes_memory_init+0x0/0x44 returned 0 after 0 msecs
calling pid_namespaces_init+0x0/0x32
initcall pid_namespaces_init+0x0/0x32 returned 0 after 0 msecs
calling audit_init+0x0/0x172
audit: initializing netlink socket (disabled)
type=2000 audit(1216436777.860:1): initialized
initcall audit_init+0x0/0x172 returned 0 after 0 msecs
calling audit_tree_init+0x0/0x4e
initcall audit_tree_init+0x0/0x4e returned 0 after 0 msecs
calling init_kprobes+0x0/0x124
initcall init_kprobes+0x0/0x124 returned 0 after 4 msecs
calling relay_init+0x0/0x19
initcall relay_init+0x0/0x19 returned 0 after 0 msecs
calling utsname_sysctl_init+0x0/0x19
initcall utsname_sysctl_init+0x0/0x19 returned 0 after 0 msecs
calling init_lstats_procfs+0x0/0x2a
initcall init_lstats_procfs+0x0/0x2a returned 0 after 0 msecs
calling init_sched_switch_trace+0x0/0x41
initcall init_sched_switch_trace+0x0/0x41 returned 0 after 0 msecs
calling init_stack_trace+0x0/0x12
initcall init_stack_trace+0x0/0x12 returned 0 after 0 msecs
calling init_function_trace+0x0/0x12
initcall init_function_trace+0x0/0x12 returned 0 after 0 msecs
calling init_irqsoff_tracer+0x0/0x14
initcall init_irqsoff_tracer+0x0/0x14 returned 0 after 0 msecs
calling init_wakeup_tracer+0x0/0x12
initcall init_wakeup_tracer+0x0/0x12 returned 0 after 0 msecs
calling init_per_zone_pages_min+0x0/0x46
initcall init_per_zone_pages_min+0x0/0x46 returned 0 after 0 msecs
calling pdflush_init+0x0/0x17
initcall pdflush_init+0x0/0x17 returned 0 after 0 msecs
calling kswapd_init+0x0/0x7d
initcall kswapd_init+0x0/0x7d returned 0 after 0 msecs
calling setup_vmstat+0x0/0x4f
initcall setup_vmstat+0x0/0x4f returned 0 after 0 msecs
calling procswaps_init+0x0/0x27
initcall procswaps_init+0x0/0x27 returned 0 after 0 msecs
calling hugetlb_init+0x0/0xa0
Total HugeTLB memory allocated, 0
initcall hugetlb_init+0x0/0xa0 returned 0 after 0 msecs
calling init_tmpfs+0x0/0xdf
initcall init_tmpfs+0x0/0xdf returned 0 after 0 msecs
calling slab_sysfs_init+0x0/0xf5
initcall slab_sysfs_init+0x0/0xf5 returned 0 after 30 msecs
calling fasync_init+0x0/0x2f
initcall fasync_init+0x0/0x2f returned 0 after 0 msecs
calling aio_setup+0x0/0x78
initcall aio_setup+0x0/0x78 returned 0 after 0 msecs
calling inotify_setup+0x0/0x17
initcall inotify_setup+0x0/0x17 returned 0 after 0 msecs
calling inotify_user_setup+0x0/0xbd
initcall inotify_user_setup+0x0/0xbd returned 0 after 0 msecs
calling init_sys32_ioctl+0x0/0x8a
initcall init_sys32_ioctl+0x0/0x8a returned 0 after 0 msecs
calling dquot_init+0x0/0x108
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
initcall dquot_init+0x0/0x108 returned 0 after 0 msecs
calling init_v2_quota_format+0x0/0x17
initcall init_v2_quota_format+0x0/0x17 returned 0 after 0 msecs
calling dnotify_init+0x0/0x2f
initcall dnotify_init+0x0/0x2f returned 0 after 0 msecs
calling vmcore_init+0x0/0x860
initcall vmcore_init+0x0/0x860 returned 0 after 0 msecs
calling init_devpts_fs+0x0/0x44
initcall init_devpts_fs+0x0/0x44 returned 0 after 0 msecs
calling init_ramfs_fs+0x0/0x17
initcall init_ramfs_fs+0x0/0x17 returned 0 after 0 msecs
calling init_hugetlbfs_fs+0x0/0x9d
initcall init_hugetlbfs_fs+0x0/0x9d returned 0 after 0 msecs
calling init_iso9660_fs+0x0/0x76
initcall init_iso9660_fs+0x0/0x76 returned 0 after 0 msecs
calling init_nls_cp437+0x0/0x17
initcall init_nls_cp437+0x0/0x17 returned 0 after 0 msecs
calling init_nls_ascii+0x0/0x17
initcall init_nls_ascii+0x0/0x17 returned 0 after 0 msecs
calling ipc_init+0x0/0x28
msgmni has been set to 5936
initcall ipc_init+0x0/0x28 returned 0 after 0 msecs
calling ipc_sysctl_init+0x0/0x19
initcall ipc_sysctl_init+0x0/0x19 returned 0 after 0 msecs
calling init_mqueue_fs+0x0/0xdb
initcall init_mqueue_fs+0x0/0xdb returned 0 after 0 msecs
calling key_proc_init+0x0/0x5e
initcall key_proc_init+0x0/0x5e returned 0 after 0 msecs
calling selinux_nf_ip_init+0x0/0x7f
SELinux: Registering netfilter hooks
initcall selinux_nf_ip_init+0x0/0x7f returned 0 after 0 msecs
calling init_sel_fs+0x0/0x6d
initcall init_sel_fs+0x0/0x6d returned 0 after 1 msecs
calling selnl_init+0x0/0x52
initcall selnl_init+0x0/0x52 returned 0 after 0 msecs
calling sel_netif_init+0x0/0x6b
initcall sel_netif_init+0x0/0x6b returned 0 after 0 msecs
calling sel_netnode_init+0x0/0x78
initcall sel_netnode_init+0x0/0x78 returned 0 after 0 msecs
calling sel_netport_init+0x0/0x78
initcall sel_netport_init+0x0/0x78 returned 0 after 0 msecs
calling aurule_init+0x0/0x3c
initcall aurule_init+0x0/0x3c returned 0 after 0 msecs
calling crypto_algapi_init+0x0/0x12
initcall crypto_algapi_init+0x0/0x12 returned 0 after 0 msecs
calling cryptomgr_init+0x0/0x17
initcall cryptomgr_init+0x0/0x17 returned 0 after 0 msecs
calling hmac_module_init+0x0/0x17
initcall hmac_module_init+0x0/0x17 returned 0 after 0 msecs
calling md5_mod_init+0x0/0x17
initcall md5_mod_init+0x0/0x17 returned 0 after 0 msecs
calling sha1_generic_mod_init+0x0/0x17
initcall sha1_generic_mod_init+0x0/0x17 returned 0 after 0 msecs
calling bsg_init+0x0/0x128
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
initcall bsg_init+0x0/0x128 returned 0 after 0 msecs
calling noop_init+0x0/0x19
io scheduler noop registered
initcall noop_init+0x0/0x19 returned 0 after 0 msecs
calling as_init+0x0/0x19
io scheduler anticipatory registered
initcall as_init+0x0/0x19 returned 0 after 0 msecs
calling deadline_init+0x0/0x19
io scheduler deadline registered
initcall deadline_init+0x0/0x19 returned 0 after 0 msecs
calling cfq_init+0x0/0x99
io scheduler cfq registered (default)
initcall cfq_init+0x0/0x99 returned 0 after 0 msecs
calling debug_objects_init_debugfs+0x0/0x64
initcall debug_objects_init_debugfs+0x0/0x64 returned 0 after 0 msecs
calling percpu_counter_startup+0x0/0x14
initcall percpu_counter_startup+0x0/0x14 returned 0 after 0 msecs
calling pci_init+0x0/0x3a
pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x1010
pci 0000:00:1d.0: Performing full reset
pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010
pci 0000:00:1d.1: Performing full reset
pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010
pci 0000:00:1d.2: Performing full reset
pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0010
pci 0000:00:1d.3: Performing full reset
pci 0000:01:00.0: Boot video device
initcall pci_init+0x0/0x3a returned 0 after 1 msecs
calling pci_proc_init+0x0/0x70
initcall pci_proc_init+0x0/0x70 returned 0 after 0 msecs
calling pcie_portdrv_init+0x0/0x52
PCI: Setting latency timer of device 0000:00:01.0 to 64
pcieport-driver 0000:00:01.0: found MSI capability
pci_express 0000:00:01.0:pcie00: allocate port service
pci_express 0000:00:01.0:pcie03: allocate port service
PCI: Setting latency timer of device 0000:00:1c.0 to 64
pcieport-driver 0000:00:1c.0: found MSI capability
pci_express 0000:00:1c.0:pcie00: allocate port service
pci_express 0000:00:1c.0:pcie02: allocate port service
pci_express 0000:00:1c.0:pcie03: allocate port service
PCI: Setting latency timer of device 0000:00:1c.1 to 64
pcieport-driver 0000:00:1c.1: found MSI capability
pci_express 0000:00:1c.1:pcie00: allocate port service
pci_express 0000:00:1c.1:pcie02: allocate port service
pci_express 0000:00:1c.1:pcie03: allocate port service
PCI: Setting latency timer of device 0000:00:1c.2 to 64
pcieport-driver 0000:00:1c.2: found MSI capability
pci_express 0000:00:1c.2:pcie00: allocate port service
pci_express 0000:00:1c.2:pcie02: allocate port service
pci_express 0000:00:1c.2:pcie03: allocate port service
initcall pcie_portdrv_init+0x0/0x52 returned 0 after 7 msecs
calling aer_service_init+0x0/0x25
initcall aer_service_init+0x0/0x25 returned 0 after 0 msecs
calling pci_hotplug_init+0x0/0x22
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
initcall pci_hotplug_init+0x0/0x22 returned 0 after 0 msecs
calling fb_console_init+0x0/0x12b
initcall fb_console_init+0x0/0x12b returned 0 after 0 msecs
calling vesafb_init+0x0/0x23f
initcall vesafb_init+0x0/0x23f returned 0 after 0 msecs
calling efifb_init+0x0/0x1f2
initcall efifb_init+0x0/0x1f2 returned -19 after 0 msecs
calling acpi_reserve_resources+0x0/0xf0
initcall acpi_reserve_resources+0x0/0xf0 returned 0 after 0 msecs
calling acpi_button_init+0x0/0x63
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID0]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
ACPI: Sleep Button (CM) [SLPB]
initcall acpi_button_init+0x0/0x63 returned 0 after 4 msecs
calling acpi_fan_init+0x0/0x63
initcall acpi_fan_init+0x0/0x63 returned 0 after 0 msecs
calling irqrouter_init_sysfs+0x0/0x3d
initcall irqrouter_init_sysfs+0x0/0x3d returned 0 after 0 msecs
calling acpi_processor_init+0x0/0x10f
ACPI: SSDT BFEB8A90, 02F0 (r1 APPLE Cpu0Ist 3000 INTL 20050309)
ACPI: SSDT BFEB6C10, 02A0 (r1 APPLE Cpu0Cst 3001 INTL 20050309)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT BFEB7F10, 0087 (r1 APPLE Cpu1Ist 3000 INTL 20050309)
ACPI: SSDT BFEB6F10, 0085 (r1 APPLE Cpu1Cst 3000 INTL 20050309)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: ACPI0007:01 is registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
initcall acpi_processor_init+0x0/0x10f returned 0 after 22 msecs
calling acpi_container_init+0x0/0x47
initcall acpi_container_init+0x0/0x47 returned 0 after 17 msecs
calling acpi_thermal_init+0x0/0x88
initcall acpi_thermal_init+0x0/0x88 returned 0 after 0 msecs
calling rand_initialize+0x0/0x31
initcall rand_initialize+0x0/0x31 returned 0 after 0 msecs
calling tty_init+0x0/0x1ca
initcall tty_init+0x0/0x1ca returned 0 after 29 msecs
calling pty_init+0x0/0x278
initcall pty_init+0x0/0x278 returned 0 after 0 msecs
calling hpet_init+0x0/0x6f
hpet_resources: 0xfed00000 is busy
initcall hpet_init+0x0/0x6f returned 0 after 1 msecs
calling nvram_init+0x0/0x8f
Non-volatile memory driver v1.2
initcall nvram_init+0x0/0x8f returned 0 after 0 msecs
calling agp_init+0x0/0x2b
Linux agpgart interface v0.103
initcall agp_init+0x0/0x2b returned 0 after 0 msecs
calling agp_intel_init+0x0/0x2e
initcall agp_intel_init+0x0/0x2e returned 0 after 0 msecs
calling agp_sis_init+0x0/0x2e
initcall agp_sis_init+0x0/0x2e returned 0 after 0 msecs
calling agp_via_init+0x0/0x2e
initcall agp_via_init+0x0/0x2e returned 0 after 0 msecs
calling cn_proc_init+0x0/0x42
initcall cn_proc_init+0x0/0x42 returned 0 after 0 msecs
calling serial8250_init+0x0/0x148
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
initcall serial8250_init+0x0/0x148 returned 0 after 2 msecs
calling serial8250_pnp_init+0x0/0x17
initcall serial8250_pnp_init+0x0/0x17 returned 0 after 0 msecs
calling serial8250_pci_init+0x0/0x20
initcall serial8250_pci_init+0x0/0x20 returned 0 after 0 msecs
calling init_kgdboc+0x0/0x1b
initcall init_kgdboc+0x0/0x1b returned 0 after 0 msecs
calling topology_sysfs_init+0x0/0x5e
initcall topology_sysfs_init+0x0/0x5e returned 0 after 0 msecs
calling brd_init+0x0/0x172
brd: module loaded
initcall brd_init+0x0/0x172 returned 0 after 11 msecs
calling init_kgdbts+0x0/0x1b
initcall init_kgdbts+0x0/0x1b returned 0 after 0 msecs
calling net_olddevs_init+0x0/0xa3
initcall net_olddevs_init+0x0/0xa3 returned 0 after 0 msecs
calling mac_hid_init+0x0/0xd7
input: Macintosh mouse button emulation as /devices/virtual/input/input4
initcall mac_hid_init+0x0/0xd7 returned 0 after 0 msecs
calling init_sd+0x0/0xfd
Driver 'sd' needs updating - please use bus_type methods
initcall init_sd+0x0/0xfd returned 0 after 0 msecs
calling init_sg+0x0/0x145
initcall init_sg+0x0/0x145 returned 0 after 0 msecs
calling nonstatic_sysfs_init+0x0/0x17
initcall nonstatic_sysfs_init+0x0/0x17 returned 0 after 0 msecs
calling yenta_socket_init+0x0/0x20
initcall yenta_socket_init+0x0/0x20 returned 0 after 0 msecs
calling mon_init+0x0/0x11c
initcall mon_init+0x0/0x11c returned 0 after 0 msecs
calling i8042_init+0x0/0x371
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
initcall i8042_init+0x0/0x371 returned -19 after 2 msecs
calling serport_init+0x0/0x39
initcall serport_init+0x0/0x39 returned 0 after 0 msecs
calling mousedev_init+0x0/0x67
mice: PS/2 mouse device common for all mice
initcall mousedev_init+0x0/0x67 returned 0 after 4 msecs
calling evdev_init+0x0/0x17
initcall evdev_init+0x0/0x17 returned 0 after 21 msecs
calling atkbd_init+0x0/0x2c
initcall atkbd_init+0x0/0x2c returned 0 after 0 msecs
calling psmouse_init+0x0/0x78
initcall psmouse_init+0x0/0x78 returned 0 after 0 msecs
calling cmos_init+0x0/0x35
rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
initcall cmos_init+0x0/0x35 returned 0 after 1 msecs
calling init_ladder+0x0/0x17
cpuidle: using governor ladder
initcall init_ladder+0x0/0x17 returned 0 after 2 msecs
calling init_menu+0x0/0x17
cpuidle: using governor menu
initcall init_menu+0x0/0x17 returned 0 after 4 msecs
calling efivars_init+0x0/0x1f5
initcall efivars_init+0x0/0x1f5 returned -19 after 0 msecs
calling hid_init+0x0/0x10
initcall hid_init+0x0/0x10 returned 0 after 0 msecs
calling hid_init+0x0/0x67
Marking TSC unstable due to TSC halts in idle
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
initcall hid_init+0x0/0x67 returned 0 after 1 msecs
calling sysctl_core_init+0x0/0x17
initcall sysctl_core_init+0x0/0x17 returned 0 after 0 msecs
calling flow_cache_init+0x0/0x1ca
initcall flow_cache_init+0x0/0x1ca returned 0 after 0 msecs
calling llc_init+0x0/0x25
initcall llc_init+0x0/0x25 returned 0 after 0 msecs
calling snap_init+0x0/0x36
initcall snap_init+0x0/0x36 returned 0 after 0 msecs
calling rif_init+0x0/0x9a
initcall rif_init+0x0/0x9a returned 0 after 0 msecs
calling blackhole_module_init+0x0/0x17
initcall blackhole_module_init+0x0/0x17 returned 0 after 0 msecs
calling sysctl_ipv4_init+0x0/0x53
initcall sysctl_ipv4_init+0x0/0x53 returned 0 after 1 msecs
calling init_syncookies+0x0/0x1e
initcall init_syncookies+0x0/0x1e returned 0 after 0 msecs
calling ipv4_netfilter_init+0x0/0x17
initcall ipv4_netfilter_init+0x0/0x17 returned 0 after 0 msecs
calling cubictcp_register+0x0/0x6a
TCP cubic registered
initcall cubictcp_register+0x0/0x6a returned 0 after 0 msecs
calling xfrm_user_init+0x0/0x5e
Initializing XFRM netlink socket
initcall xfrm_user_init+0x0/0x5e returned 0 after 0 msecs
calling packet_init+0x0/0x4c
NET: Registered protocol family 17
initcall packet_init+0x0/0x4c returned 0 after 0 msecs
calling hpet_insert_resource+0x0/0x28
initcall hpet_insert_resource+0x0/0x28 returned 0 after 0 msecs
calling update_mp_table+0x0/0x61b
initcall update_mp_table+0x0/0x61b returned 0 after 0 msecs
calling lapic_insert_resource+0x0/0x45
initcall lapic_insert_resource+0x0/0x45 returned 0 after 0 msecs
calling init_lapic_nmi_sysfs+0x0/0x3d
initcall init_lapic_nmi_sysfs+0x0/0x3d returned 0 after 0 msecs
calling ioapic_insert_resources+0x0/0x54
initcall ioapic_insert_resources+0x0/0x54 returned 0 after 0 msecs
calling check_early_ioremap_leak+0x0/0x49
initcall check_early_ioremap_leak+0x0/0x49 returned 0 after 0 msecs
calling sched_init_debug+0x0/0x24
initcall sched_init_debug+0x0/0x24 returned 0 after 0 msecs
calling init_oops_id+0x0/0x28
initcall init_oops_id+0x0/0x28 returned 0 after 0 msecs
calling disable_boot_consoles+0x0/0x3f
initcall disable_boot_consoles+0x0/0x3f returned 0 after 0 msecs
calling pm_qos_power_init+0x0/0xcf
initcall pm_qos_power_init+0x0/0xcf returned 0 after 0 msecs
calling software_resume+0x0/0x1ba
initcall software_resume+0x0/0x1ba returned -2 after 0 msecs
initcall software_resume+0x0/0x1ba returned with error code -2
calling debugfs_kprobe_init+0x0/0x8e
initcall debugfs_kprobe_init+0x0/0x8e returned 0 after 0 msecs
calling taskstats_init+0x0/0x9a
registered taskstats version 1
initcall taskstats_init+0x0/0x9a returned 0 after 0 msecs
calling fail_page_alloc_debugfs+0x0/0xe9
initcall fail_page_alloc_debugfs+0x0/0xe9 returned 0 after 0 msecs
calling fail_make_request_debugfs+0x0/0x1e
initcall fail_make_request_debugfs+0x0/0x1e returned 0 after 0 msecs
calling random32_reseed+0x0/0x7e
initcall random32_reseed+0x0/0x7e returned 0 after 0 msecs
calling pci_sysfs_init+0x0/0x51
initcall pci_sysfs_init+0x0/0x51 returned 0 after 0 msecs
calling acpi_wakeup_device_init+0x0/0xb6
initcall acpi_wakeup_device_init+0x0/0xb6 returned 0 after 0 msecs
calling acpi_sleep_proc_init+0x0/0x5a
initcall acpi_sleep_proc_init+0x0/0x5a returned 0 after 0 msecs
calling seqgen_init+0x0/0x14
initcall seqgen_init+0x0/0x14 returned 0 after 0 msecs
calling late_resume_init+0x0/0x112
Magic number: 0:812:108
initcall late_resume_init+0x0/0x112 returned 0 after 0 msecs
calling scsi_complete_async_scans+0x0/0xf4
initcall scsi_complete_async_scans+0x0/0xf4 returned 0 after 0 msecs
calling memmap_init+0x0/0x9d
initcall memmap_init+0x0/0x9d returned 0 after 0 msecs
calling pci_mmcfg_late_insert_resources+0x0/0x48
initcall pci_mmcfg_late_insert_resources+0x0/0x48 returned 0 after 0 msecs
calling tcp_congestion_default+0x0/0x17
initcall tcp_congestion_default+0x0/0x17 returned 0 after 0 msecs
debug: unmapping init memory ffffffff814eb000..ffffffff8166d000
Write protecting the kernel read-only data: 1368k
ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
drivers/usb/core/inode.c: creating file 'devices'
drivers/usb/core/inode.c: creating file '001'
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: supports USB remote wakeup
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd8405400
ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: default language 0x0409
usb usb1: uevent
usb usb1: usb_probe_device
usb usb1: configuration #1 chosen from 1 choice
usb usb1: adding 1-0:1.0 (config #1, interface 0)
usb 1-0:1.0: uevent
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: no power switching (usb 1.0)
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: power on to power good time: 20ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: trying to enable port power on non-switchable hub
Clocksource tsc unstable (delta = -305979950 ns)
hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000
drivers/usb/core/inode.c: creating file '001'
ehci_hcd 0000:00:1d.7: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.27-0.156.rc0.git4.fc9.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s
modprobe used greatest stack depth: 3792 bytes left
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd: block sizes: ed 80 td 96
USB Universal Host Controller Interface driver v3.0
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
drivers/usb/core/inode.c: creating file '002'
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.0: Performing full reset
uhci_hcd 0000:00:1d.0: supports USB remote wakeup
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080
usb usb2: default language 0x0409
usb usb2: uevent
usb usb2: usb_probe_device
usb usb2: configuration #1 chosen from 1 choice
usb usb2: adding 2-0:1.0 (config #1, interface 0)
usb 2-0:1.0: uevent
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: no power switching (usb 1.0)
hub 2-0:1.0: individual port over-current protection
hub 2-0:1.0: power on to power good time: 2ms
hub 2-0:1.0: local power source is good
hub 2-0:1.0: trying to enable port power on non-switchable hub
hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501
drivers/usb/core/inode.c: creating file '001'
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.27-0.156.rc0.git4.fc9.x86_64 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
drivers/usb/core/inode.c: creating file '003'
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.1: Performing full reset
uhci_hcd 0000:00:1d.1: supports USB remote wakeup
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060
usb usb3: default language 0x0409
usb usb3: uevent
usb usb3: usb_probe_device
usb usb3: configuration #1 chosen from 1 choice
usb usb3: adding 3-0:1.0 (config #1, interface 0)
usb 3-0:1.0: uevent
hub 3-0:1.0: usb_probe_interface
hub 3-0:1.0: usb_probe_interface - got id
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
hub 3-0:1.0: standalone hub
hub 3-0:1.0: no power switching (usb 1.0)
hub 3-0:1.0: individual port over-current protection
hub 3-0:1.0: power on to power good time: 2ms
hub 3-0:1.0: local power source is good
hub 3-0:1.0: trying to enable port power on non-switchable hub
ehci_hcd 0000:00:1d.7: port 2 full speed --> companion
ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT
hub 1-0:1.0: port 2 not reset yet, waiting 50ms
ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC CONNECT
hub 1-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
drivers/usb/core/inode.c: creating file '001'
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.27-0.156.rc0.git4.fc9.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
drivers/usb/core/inode.c: creating file '004'
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.2: Performing full reset
uhci_hcd 0000:00:1d.2: supports USB remote wakeup
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
usb usb4: default language 0x0409
usb usb4: uevent
usb usb4: usb_probe_device
usb usb4: configuration #1 chosen from 1 choice
usb usb4: adding 4-0:1.0 (config #1, interface 0)
usb 4-0:1.0: uevent
hub 4-0:1.0: usb_probe_interface
hub 4-0:1.0: usb_probe_interface - got id
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
hub 4-0:1.0: standalone hub
hub 4-0:1.0: no power switching (usb 1.0)
hub 4-0:1.0: individual port over-current protection
hub 4-0:1.0: power on to power good time: 2ms
hub 4-0:1.0: local power source is good
hub 4-0:1.0: trying to enable port power on non-switchable hub
hub 1-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
drivers/usb/core/inode.c: creating file '001'
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.27-0.156.rc0.git4.fc9.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
drivers/usb/core/inode.c: creating file '005'
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: detected 2 ports
uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.3: Performing full reset
uhci_hcd 0000:00:1d.3: supports USB remote wakeup
uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020
usb usb5: default language 0x0409
usb usb5: uevent
usb usb5: usb_probe_device
usb usb5: configuration #1 chosen from 1 choice
usb usb5: adding 5-0:1.0 (config #1, interface 0)
usb 5-0:1.0: uevent
hub 5-0:1.0: usb_probe_interface
hub 5-0:1.0: usb_probe_interface - got id
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
hub 5-0:1.0: standalone hub
hub 5-0:1.0: no power switching (usb 1.0)
hub 5-0:1.0: individual port over-current protection
hub 5-0:1.0: power on to power good time: 2ms
hub 5-0:1.0: local power source is good
hub 5-0:1.0: trying to enable port power on non-switchable hub
ehci_hcd 0000:00:1d.7: port 4 high speed
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT
usb 1-4: new high speed USB device using ehci_hcd and address 3
drivers/usb/core/inode.c: creating file '001'
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.27-0.156.rc0.git4.fc9.x86_64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
modprobe used greatest stack depth: 3744 bytes left
ata_piix 0000:00:1f.1: version 2.12
ata_piix 0000:00:1f.1: power state changed by ACPI to D0
ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1f.1 to 64
ehci_hcd 0000:00:1d.7: port 4 high speed
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40b0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40b8 irq 15
usb 1-4: uevent
usb 1-4: usb_probe_device
usb 1-4: configuration #1 chosen from 1 choice
usb 1-4: adding 1-4:1.0 (config #1, interface 0)
usb 1-4:1.0: uevent
drivers/usb/core/inode.c: creating file '003'
usb 1-4: New USB device found, idVendor=05ac, idProduct=8300
usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
ehci_hcd 0000:00:1d.7: GetStatus port 6 status 001803 POWER sig=j CSC CONNECT
hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
ata1.00: ATAPI: MATSHITADVD-R UJ-85J, FAV1, max UDMA/66
ata1.00: configured for UDMA/66
hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: port 6 full speed --> companion
ehci_hcd 0000:00:1d.7: GetStatus port 6 status 003801 POWER OWNER sig=j CONNECT
hub 1-0:1.0: port 6 not reset yet, waiting 50ms
ehci_hcd 0000:00:1d.7: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC
ehci_hcd 0000:00:1d.7: GetStatus port 7 status 001803 POWER sig=j CSC CONNECT
hub 1-0:1.0: port 7, status 0501, change 0001, 480 Mb/s
isa bounce pool size: 16 pages
scsi 0:0:0:0: CD-ROM MATSHITA DVD-R UJ-85J FAV1 PQ: 0 ANSI: 5
scsi 0:0:0:0: Attached scsi generic sg0 type 5
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
hub 1-0:1.0: debounce: port 7: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: port 7 full speed --> companion
ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003801 POWER OWNER sig=j CONNECT
hub 1-0:1.0: port 7 not reset yet, waiting 50ms
ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003002 POWER OWNER sig=se0 CSC
hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0004
uhci_hcd 0000:00:1d.0: port 2 portsc 009b,00
hub 2-0:1.0: port 2, status 0101, change 0003, 12 Mb/s
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x40c8 ctl 0x40e4 bmdma 0x40a0 irq 19
ata4: SATA max UDMA/133 cmd 0x40c0 ctl 0x40e0 bmdma 0x40a8 irq 19
hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
ata3.01: ATA-7: TOSHIBA MK2035GSS, DK021B, max UDMA/100
ata3.01: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/4)
ata3.01: configured for UDMA/100
usb 2-2: new full speed USB device using uhci_hcd and address 2
usb 2-2: ep0 maxpacket = 8
usb 2-2: USB quirks for this device: 2
scsi 2:0:1:0: Direct-Access ATA TOSHIBA MK2035GS DK02 PQ: 0 ANSI: 5
sd 2:0:1:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
sd 2:0:1:0: [sda] Write Protect is off
sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:1:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
sd 2:0:1:0: [sda] Write Protect is off
sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:<7>usb 2-2: skipped 1 descriptor after interface
usb 2-2: skipped 1 descriptor after interface
usb 2-2: skipped 1 descriptor after interface
usb 2-2: default language 0x0409
usb 2-2: uevent
usb 2-2: usb_probe_device
usb 2-2: configuration #1 chosen from 1 choice
usb 2-2: adding 2-2:1.0 (config #1, interface 0)
usb 2-2:1.0: uevent
usbhid 2-2:1.0: usb_probe_interface
usbhid 2-2:1.0: usb_probe_interface - got id
input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input5 uhci_hcd 0000:00:1d.0: reserve dev 2 ep83-INT, period 8, phase 4, 17 us
input,hidraw0: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2 usb 2-2: adding 2-2:1.1 (config #1, interface 1)
usb 2-2:1.1: uevent
usbhid 2-2:1.1: usb_probe_interface
usbhid 2-2:1.1: usb_probe_interface - got id
usb 2-2: adding 2-2:1.2 (config #1, interface 2)
usb 2-2:1.2: uevent
usbhid 2-2:1.2: usb_probe_interface
usbhid 2-2:1.2: usb_probe_interface - got id
input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.2/input/input6 uhci_hcd 0000:00:1d.0: reserve dev 2 ep84-INT, period 8, phase 4, 12 us
sda1 sda2 sda3 sda4 sda5
input,hidraw1: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2 sd 2:0:1:0: [sda] Attached SCSI disk
sd 2:0:1:0: Attached scsi generic sg1 type 0
modprobe used greatest stack depth: 2304 bytes left
drivers/usb/core/inode.c: creating file '002'
usb 2-2: New USB device found, idVendor=05ac, idProduct=021a
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: Apple Internal Keyboard / Trackpad
usb 2-2: Manufacturer: Apple Computer
hub 1-0:1.0: state 7 ports 8 chg 0000 evt fe80
hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0004
uhci_hcd 0000:00:1d.1: port 2 portsc 008a,00
hub 3-0:1.0: port 2, status 0100, change 0003, 12 Mb/s
hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100
hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0004
uhci_hcd 0000:00:1d.2: port 2 portsc 009b,00
hub 4-0:1.0: port 2, status 0101, change 0003, 12 Mb/s
hub 4-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
usb 4-2: new full speed USB device using uhci_hcd and address 2
usb 4-2: ep0 maxpacket = 8
usb 4-2: skipped 1 descriptor after interface
usb 4-2: default language 0x0409
usb 4-2: uevent
usb 4-2: usb_probe_device
usb 4-2: configuration #1 chosen from 1 choice
usb 4-2: adding 4-2:1.0 (config #1, interface 0)
usb 4-2:1.0: uevent
usbhid 4-2:1.0: usb_probe_interface
usbhid 4-2:1.0: usb_probe_interface - got id
drivers/usb/core/file.c: looking for a minor, starting at 96
hiddev96hidraw2: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2 drivers/usb/core/inode.c: creating file '002'
usb 4-2: New USB device found, idVendor=05ac, idProduct=8240
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-2: Product: IR Receiver
usb 4-2: Manufacturer: Apple Computer, Inc.
hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002
uhci_hcd 0000:00:1d.3: port 1 portsc 009b,00
hub 5-0:1.0: port 1, status 0101, change 0003, 12 Mb/s
hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
usb 5-1: new full speed USB device using uhci_hcd and address 2
usb 5-1: skipped 1 descriptor after interface
usb 5-1: skipped 1 descriptor after interface
usb 5-1: uevent
usb 5-1: usb_probe_device
usb 5-1: configuration #1 chosen from 1 choice
usb 5-1: adding 5-1:1.0 (config #1, interface 0)
usb 5-1:1.0: uevent
usbhid 5-1:1.0: usb_probe_interface
usbhid 5-1:1.0: usb_probe_interface - got id
input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input7
uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 1, phase 0, 23 us
input,hidraw3: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1
usb 5-1: adding 5-1:1.1 (config #1, interface 1)
usb 5-1:1.1: uevent
usbhid 5-1:1.1: usb_probe_interface
usbhid 5-1:1.1: usb_probe_interface - got id
input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/input/input8
input,hidraw4: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1
drivers/usb/core/inode.c: creating file '002'
usb 5-1: New USB device found, idVendor=05ac, idProduct=1000
usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0004
usb usb3: suspend_rh (auto-stop)
hub 3-0:1.0: hub_suspend
usb usb3: bus auto-suspend
usb usb3: suspend_rh
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
type=1404 audit(1216436785.373:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295

SELinux: 8192 avtab hash slots, 171021 rules.
SELinux: 8192 avtab hash slots, 171021 rules.
SELinux:  8 users, 12 roles, 2347 types, 115 bools, 1 sens, 1024 cats
SELinux:  72 classes, 171021 rules
SELinux:  permission open in class dir not defined in policy
SELinux:  permission open in class file not defined in policy
SELinux:  permission open in class chr_file not defined in policy
SELinux:  permission open in class blk_file not defined in policy
SELinux:  permission open in class fifo_file not defined in policy
SELinux: the above unknown classes and permissions will be allowed
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev sda5, type ext3), uses xattr
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts

type=1403 audit(1216436786.249:3): policy loaded auid=4294967295 ses=4294967295 usb usb2: uevent
usb 2-0:1.0: uevent
usb 2-2: uevent
usb 2-2:1.0: uevent
usb 2-2:1.1: uevent
usb 2-2:1.2: uevent
usb usb3: uevent
usb 3-0:1.0: uevent
usb usb4: uevent
usb 4-0:1.0: uevent
usb 4-2: uevent
usb 4-2:1.0: uevent
usb usb5: uevent
usb 5-0:1.0: uevent
usb 5-1: uevent
usb 5-1:1.0: uevent
usb 5-1:1.1: uevent
usb usb1: uevent
usb 1-0:1.0: uevent
usb 1-4: uevent
usb 1-4:1.0: uevent
appletouch 2-2:1.1: usb_probe_interface
appletouch 2-2:1.1: usb_probe_interface - got id
appletouch: Geyser mode initialized.
input: appletouch as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input9
usbcore: registered new interface driver appletouch
intel_rng: FWH not detected
iTCO_vendor_support: vendor-support=0
ath5k_pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:03:00.0 to 64
ath5k_pci 0000:03:00.0: registered as 'phy0'
ath5k phy0: Device not yet supported.
ath5k_pci 0000:03:00.0: PCI INT A disabled
ACPI: AC Adapter [ADP1] (on-line)
ath_hal: module license 'Proprietary' taints kernel.
AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
ACPI: Battery Slot [BAT0] (battery present)
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
input: PC Speaker as /devices/platform/pcspkr/input/input10
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ACPI: I/O resource 0000:00:1f.3 [0xefa0-0xefbf] conflicts with ACPI region SMBI [0xefa0-0xefaf]
ACPI: Device needs an ACPI driver
isight_firmware 1-4:1.0: usb_probe_interface
isight_firmware 1-4:1.0: usb_probe_interface - got id
firmware: requesting isight.fw
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input11
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:02:00.0 to 64
sky2 0000:02:00.0: v1.21 addr 0xd8200000 irq 16 Yukon-EC (0xb6) rev 2
sky2 eth0: addr 00:17:f2:d1:e0:6f
Unable to load isight firmware
usbcore: registered new interface driver isight_firmware
firewire_ohci 0000:0c:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
firewire_ohci: Added fw-ohci device 0000:0c:03.0, OHCI version 1.10
firewire_core: created device fw0: GUID 0019e3fffe6e4c54, S800
ath_pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:03:00.0 to 64
MadWifi: ath_attach: Switching rfkill capability off.
wifi0: Atheros AR5418 chip found (MAC 12.10, PHY SChip 8.1, Radio 12.0)
ath_pci: wifi0: Atheros 5418: mem=0xd8100000, irq=17
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1b.0 to 64
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
[drm] Initialized drm 1.1.0 20060810
pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:01:00.0 to 64
[drm] Initialized radeon 1.29.0 20080528 on minor 0
[drm] Setting GART location based on new memory map
[drm] Loading R500 Microcode
[drm] Num pipes: 1
[drm] writeback test succeeded in 1 usecs
uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
appletouch: incomplete data package (first byte: 2, length: 4).
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: [email protected]
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on sda5, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda3, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 2047992k swap on /dev/sda4. Priority:-1 extents:1 across:2047992k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts IA-32 Microcode Update Driver: v1.14a <[email protected]>
firmware: requesting intel-ucode/06-0f-06
firmware: requesting intel-ucode/06-0f-06
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
warning: `dbus-daemon' uses deprecated v2 capabilities in a way that may be insecure. fuse init (API version 7.9)
SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
usb usb3: usb auto-resume
usb usb3: wakeup_rh
hub 3-0:1.0: hub_resume
hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
usb usb3: suspend_rh (auto-stop)
uhci_hcd 0000:00:1d.2: reserve dev 2 ep83-INT, period 8, phase 4, 61 us
uhci_hcd 0000:00:1d.2: release dev 2 ep83-INT, period 8, phase 4, 61 us
hub 3-0:1.0: hub_suspend
usb usb3: bus auto-suspend
usb usb3: suspend_rh
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.9
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: BNEP (Ethernet Emulation) ver 1.2
Bluetooth: BNEP filters: protocol multicast
Bridge firewalling registered
pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
[drm] Num pipes: 1
[drm] Setting GART location based on new memory map
[drm] Loading R500 Microcode
[drm] Num pipes: 1
[drm] writeback test succeeded in 1 usecs
uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.3: release dev 2 ep82-INT, period 1, phase 0, 23 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.3: reserve dev 2 ep82-INT, period 1, phase 0, 23 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
ath0: no IPv6 routers present
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
domain 1: span 0-1 level NODE
groups: 0-1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
domain 1: span 0-1 level NODE
groups: 0-1
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
domain 1: span 0-1 level NODE
groups: 0-1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
domain 1: span 0-1 level NODE
groups: 0-1
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 61 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 61 us