x86: introduce x86_ops

Index: linux-2.6/arch/x86/kernel/e820.c
===================================================================
@@ -1299,11 +1299,6 @@ void __init e820_reserve_resources(void)
 	}
 }
 
-/*
- * Non-standard memory setup can be specified via this quirk:
- */
-char * (*arch_memory_setup_quirk)(void);
-
 char *__init default_machine_specific_memory_setup(void)
 {
 	char *who = "BIOS-e820";

@@ -1344,8 +1339,8 @@ char *__init default_machine_specific_me
 
 char *__init __attribute__((weak)) machine_specific_memory_setup(void)
 {
-	if (arch_memory_setup_quirk) {
-		char *who = arch_memory_setup_quirk();
+	if (x86_ops->arch_memory_setup) {
+		char *who = x86_ops->arch_memory_setup();
 
 		if (who)
 			return who;

Index: linux-2.6/arch/x86/kernel/mpparse.c
===================================================================
@@ -27,6 +27,7 @@
 #include <asm/bios_ebda.h>
 #include <asm/e820.h>
 #include <asm/trampoline.h>
+#include <asm/setup.h>
 
 #include <mach_apic.h>
 #ifdef CONFIG_X86_32

@@ -728,20 +729,14 @@ static inline void __init construct_defa
 static struct intel_mp_floating *mpf_found;
 
 /*
- * Machine specific quirk for finding the SMP config before other setup
- * activities destroy the table:
- */
-int (*mach_get_smp_config_quirk)(unsigned int early);
-
-/*
  * Scan the memory blocks for an SMP configuration block.
  */
 static void __init __get_smp_config(unsigned int early)
 {
 	struct intel_mp_floating *mpf = mpf_found;
 
-	if (mach_get_smp_config_quirk) {
-		if (mach_get_smp_config_quirk(early))
+	if (x86_ops->mach_get_smp_config) {
+		if (x86_ops->mach_get_smp_config(early))
 			return;
 	}
 	if (acpi_lapic && early)

@@ -901,14 +896,12 @@ static int __init smp_scan_config(unsign
 	return 0;
 }
 
-int (*mach_find_smp_config_quirk)(unsigned int reserve);
-
 static void __init __find_smp_config(unsigned int reserve)
 {
 	unsigned int address;
 
-	if (mach_find_smp_config_quirk) {
-		if (mach_find_smp_config_quirk(reserve))
+	if (x86_ops->mach_find_smp_config) {
+		if (x86_ops->mach_find_smp_config(reserve))
 			return;
 	}
 	/*

Index: linux-2.6/arch/x86/kernel/setup.c
===================================================================
@@ -574,6 +574,10 @@ static int __init setup_elfcorehdr(char
 early_param("elfcorehdr", setup_elfcorehdr);
 #endif
 
+static struct x86_ops default_x86_ops __initdata;
+
+struct x86_ops *x86_ops __initdata = &default_x86_ops;
+
 /*
  * Determine if we were loaded by an EFI loader.  If so, then we have also been
  * passed the efi memmap, systab, etc., so we should use these data structures

104 lines not on this page · raw message

Index: linux-2.6/arch/x86/mach-default/setup.c
===================================================================
@@ -10,14 +10,6 @@
 #include <asm/e820.h>
 #include <asm/setup.h>
 
-/*
- * Any quirks to be performed to initialize timers/irqs/etc?
- */
-int (*arch_time_init_quirk)(void);
-int (*arch_pre_intr_init_quirk)(void);
-int (*arch_intr_init_quirk)(void);
-int (*arch_trap_init_quirk)(void);
-
 #ifdef CONFIG_HOTPLUG_CPU
 #define DEFAULT_SEND_IPI	(1)
 #else

@@ -37,8 +29,8 @@ int no_broadcast=DEFAULT_SEND_IPI;
  **/
 void __init pre_intr_init_hook(void)
 {
-	if (arch_pre_intr_init_quirk) {
-		if (arch_pre_intr_init_quirk())
+	if (x86_ops->arch_pre_intr_init) {
+		if (x86_ops->arch_pre_intr_init())
 			return;
 	}
 	init_ISA_irqs();

@@ -64,8 +56,8 @@ static struct irqaction irq2 = {
  **/
 void __init intr_init_hook(void)
 {
-	if (arch_intr_init_quirk) {
-		if (arch_intr_init_quirk())
+	if (x86_ops->arch_intr_init) {
+		if (x86_ops->arch_intr_init())
 			return;
 	}
 #ifdef CONFIG_X86_LOCAL_APIC

@@ -97,8 +89,8 @@ void __init pre_setup_arch_hook(void)
  **/
 void __init trap_init_hook(void)
 {
-	if (arch_trap_init_quirk) {
-		if (arch_trap_init_quirk())
+	if (x86_ops->arch_trap_init) {
+		if (x86_ops->arch_trap_init())
 			return;
 	}
 }

@@ -119,13 +111,13 @@ static struct irqaction irq0  = {
  **/
 void __init time_init_hook(void)
 {
-	if (arch_time_init_quirk) {
+	if (x86_ops->arch_time_init) {
 		/*
 		 * A nonzero return code does not mean failure, it means
 		 * that the architecture quirk does not want any
 		 * generic (timer) setup to be performed after this:
 		 */
-		if (arch_time_init_quirk())
+		if (x86_ops->arch_time_init())
 			return;
 	}
 

Index: linux-2.6/include/asm-x86/setup.h
===================================================================
@@ -19,13 +19,17 @@ static inline int is_visws_box(void) { r
 /*
  * Any setup quirks to be performed?
  */
-extern int (*arch_time_init_quirk)(void);
-extern int (*arch_pre_intr_init_quirk)(void);
-extern int (*arch_intr_init_quirk)(void);
-extern int (*arch_trap_init_quirk)(void);
-extern char * (*arch_memory_setup_quirk)(void);
-extern int (*mach_get_smp_config_quirk)(unsigned int early);
-extern int (*mach_find_smp_config_quirk)(unsigned int reserve);
+struct x86_ops {
+	int (*arch_time_init)(void);
+	int (*arch_pre_intr_init)(void);
+	int (*arch_intr_init)(void);
+	int (*arch_trap_init)(void);
+	char * (*arch_memory_setup)(void);
+	int (*mach_get_smp_config)(unsigned int early);
+	int (*mach_find_smp_config)(unsigned int reserve);
+};
+
+extern struct x86_ops *x86_ops;
 
 #ifndef CONFIG_PARAVIRT
 #define paravirt_post_allocator_init()	do {} while (0)

Index: linux-2.6/arch/x86/kernel/mpparse.c
===================================================================
@@ -49,76 +49,6 @@ static int __init mpf_checksum(unsigned
 	return sum & 0xFF;
 }
 
-#ifdef CONFIG_X86_NUMAQ
-int found_numaq;
-/*
- * Have to match translation table entries to main table entries by counter
- * hence the mpc_record variable .... can't see a less disgusting way of
- * doing this ....
- */
-struct mpc_config_translation {
-	unsigned char mpc_type;
-	unsigned char trans_len;
-	unsigned char trans_type;
-	unsigned char trans_quad;
-	unsigned char trans_global;
-	unsigned char trans_local;
-	unsigned short trans_reserved;
-};
-
-
-static int mpc_record;
-static struct mpc_config_translation *translation_table[MAX_MPC_ENTRY]
-    __cpuinitdata;
-
-static inline int generate_logical_apicid(int quad, int phys_apicid)
-{
-	return (quad << 4) + (phys_apicid ? phys_apicid << 1 : 1);
-}
-
-
-static inline int mpc_apic_id(struct mpc_config_processor *m,
-			struct mpc_config_translation *translation_record)
-{
-	int quad = translation_record->trans_quad;
-	int logical_apicid = generate_logical_apicid(quad, m->mpc_apicid);
-
-	printk(KERN_DEBUG "Processor #%d %u:%u APIC version %d (quad %d, apic %d)\n",
-	       m->mpc_apicid,
-	       (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8,
-	       (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4,
-	       m->mpc_apicver, quad, logical_apicid);
-	return logical_apicid;
-}
-
-int mp_bus_id_to_node[MAX_MP_BUSSES];
-
-int mp_bus_id_to_local[MAX_MP_BUSSES];
-
-static void mpc_oem_bus_info(struct mpc_config_bus *m, char *name,
-	struct mpc_config_translation *translation)
-{
-	int quad = translation->trans_quad;
-	int local = translation->trans_local;
-
-	mp_bus_id_to_node[m->mpc_busid] = quad;
-	mp_bus_id_to_local[m->mpc_busid] = local;
-	printk(KERN_INFO "Bus #%d is %s (node %d)\n",
-	       m->mpc_busid, name, quad);
-}
-
-int quad_local_to_mp_bus_id [NR_CPUS/4][4];
-static void mpc_oem_pci_bus(struct mpc_config_bus *m,
-	struct mpc_config_translation *translation)
-{
-	int quad = translation->trans_quad;
-	int local = translation->trans_local;
-
-	quad_local_to_mp_bus_id[quad][local] = m->mpc_busid;
-}
-
-#endif
-
 static void __cpuinit MP_processor_info(struct mpc_config_processor *m)
 {
 	int apicid;

@@ -128,14 +58,12 @@ static void __cpuinit MP_processor_info(
 		disabled_cpus++;
 		return;
 	}
-#ifdef CONFIG_X86_NUMAQ
-	if (found_numaq)
-		apicid = mpc_apic_id(m, translation_table[mpc_record]);
+
+	if (x86_ops->mpc_apic_id)
+		apicid = x86_ops->mpc_apic_id(m);
 	else
 		apicid = m->mpc_apicid;
-#else
-	apicid = m->mpc_apicid;
-#endif
+
 	if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) {
 		bootup_cpu = " (Bootup-CPU)";
 		boot_cpu_physical_apicid = m->mpc_apicid;

@@ -152,12 +80,10 @@ static void __init MP_bus_info(struct mp
 	memcpy(str, m->mpc_bustype, 6);
 	str[6] = 0;
 
-#ifdef CONFIG_X86_NUMAQ
-	if (found_numaq)
-		mpc_oem_bus_info(m, str, translation_table[mpc_record]);
-#else
-	printk(KERN_INFO "Bus #%d is %s\n", m->mpc_busid, str);
-#endif
+	if (x86_ops->mpc_oem_bus_info)
+		x86_ops->mpc_oem_bus_info(m, str);
+	else
+		printk(KERN_INFO "Bus #%d is %s\n", m->mpc_busid, str);
 
 #if MAX_MP_BUSSES < 256
 	if (m->mpc_busid >= MAX_MP_BUSSES) {

@@ -174,10 +100,9 @@ static void __init MP_bus_info(struct mp
 		mp_bus_id_to_type[m->mpc_busid] = MP_BUS_ISA;
 #endif
 	} else if (strncmp(str, BUSTYPE_PCI, sizeof(BUSTYPE_PCI) - 1) == 0) {
-#ifdef CONFIG_X86_NUMAQ
-		if (found_numaq)
-			mpc_oem_pci_bus(m, translation_table[mpc_record]);
-#endif
+		if (x86_ops->mpc_oem_pci_bus)
+			x86_ops->mpc_oem_pci_bus(m);
+
 		clear_bit(m->mpc_busid, mp_bus_not_pci);
 #if defined(CONFIG_EISA) || defined (CONFIG_MCA)
 		mp_bus_id_to_type[m->mpc_busid] = MP_BUS_PCI;

@@ -317,83 +242,6 @@ static void __init MP_lintsrc_info(struc
 		m->mpc_srcbusirq, m->mpc_destapic, m->mpc_destapiclint);
 }
 
-#ifdef CONFIG_X86_NUMAQ
-static void __init MP_translation_info(struct mpc_config_translation *m)
-{
-	printk(KERN_INFO
-	       "Translation: record %d, type %d, quad %d, global %d, local %d\n",
-	       mpc_record, m->trans_type, m->trans_quad, m->trans_global,
-	       m->trans_local);
-
-	if (mpc_record >= MAX_MPC_ENTRY)
-		printk(KERN_ERR "MAX_MPC_ENTRY exceeded!\n");
-	else
-		translation_table[mpc_record] = m;	/* stash this for later */
-	if (m->trans_quad < MAX_NUMNODES && !node_online(m->trans_quad))
-		node_set_online(m->trans_quad);
-}
-
-/*
- * Read/parse the MPC oem tables
- */
-
-static void __init smp_read_mpc_oem(struct mp_config_oemtable *oemtable,
-				    unsigned short oemsize)
-{
-	int count = sizeof(*oemtable);	/* the header size */
-	unsigned char *oemptr = ((unsigned char *)oemtable) + count;
-
-	mpc_record = 0;
-	printk(KERN_INFO "Found an OEM MPC table at %8p - parsing it ... \n",
-	       oemtable);
-	if (memcmp(oemtable->oem_signature, MPC_OEM_SIGNATURE, 4)) {
-		printk(KERN_WARNING
-		       "SMP mpc oemtable: bad signature [%c%c%c%c]!\n",
-		       oemtable->oem_signature[0], oemtable->oem_signature[1],
-		       oemtable->oem_signature[2], oemtable->oem_signature[3]);
-		return;
-	}
-	if (mpf_checksum((unsigned char *)oemtable, oemtable->oem_length)) {
-		printk(KERN_WARNING "SMP oem mptable: checksum error!\n");
-		return;
-	}
-	while (count < oemtable->oem_length) {
-		switch (*oemptr) {
-		case MP_TRANSLATION:
-			{
-				struct mpc_config_translation *m =
-				    (struct mpc_config_translation *)oemptr;
-				MP_translation_info(m);
-				oemptr += sizeof(*m);
-				count += sizeof(*m);
-				++mpc_record;
-				break;
-			}
-		default:
-			{
-				printk(KERN_WARNING
-				       "Unrecognised OEM table entry type! - %d\n",
-				       (int)*oemptr);
-				return;
-			}
-		}
-	}
-}
-
-void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem,
-				 char *productid)
-{
-	if (strncmp(oem, "IBM NUMA", 8))
-		printk("Warning!  Not a NUMA-Q system!\n");
-	else
-		found_numaq = 1;
-
-	if (mpc->mpc_oemptr)
-		smp_read_mpc_oem((struct mp_config_oemtable *)mpc->mpc_oemptr,
-				 mpc->mpc_oemsize);
-}
-#endif /* CONFIG_X86_NUMAQ */
-
 /*
  * Read/parse the MPC
  */

@@ -458,7 +306,6 @@ static int __init smp_read_mpc(struct mp
 	} else
 		mps_oem_check(mpc, oem, str);
 #endif
-
 	/* save the local APIC address, it might be non-default */
 	if (!acpi_lapic)
 		mp_lapic_addr = mpc->mpc_lapic;

@@ -466,12 +313,17 @@ static int __init smp_read_mpc(struct mp
 	if (early)
 		return 1;
 
+	if (mpc->mpc_oemptr && x86_ops->smp_read_mpc_oem) {
+		struct mp_config_oemtable *oem_table = (struct mp_config_oemtable *)(unsigned long)mpc->mpc_oemptr;
+		x86_ops->smp_read_mpc_oem(oem_table, mpc->mpc_oemsize);
+	}
+
 	/*
 	 *      Now process the configuration blocks.
 	 */
-#ifdef CONFIG_X86_NUMAQ
-	mpc_record = 0;
-#endif
+	if (x86_ops->mpc_record)
+		*x86_ops->mpc_record = 0;
+
 	while (count < mpc->mpc_length) {
 		switch (*mpt) {
 		case MP_PROCESSOR:

@@ -537,9 +389,8 @@ static int __init smp_read_mpc(struct mp
 			count = mpc->mpc_length;
 			break;
 		}
-#ifdef CONFIG_X86_NUMAQ
-		++mpc_record;
-#endif
+		if (x86_ops->mpc_record)
+			(*x86_ops->mpc_record)++;
 	}
 
 #ifdef CONFIG_X86_GENERICARCH

211 lines not on this page · raw message

Index: linux-2.6/include/asm-x86/mach-generic/mach_mpspec.h
===================================================================
@@ -7,4 +7,6 @@
 /* Maximum 256 PCI busses, plus 1 ISA bus in each of 4 cabinets. */
 #define MAX_MP_BUSSES 260
 
+extern void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem,
+				char *productid);
 #endif /* __ASM_MACH_MPSPEC_H */

Index: linux-2.6/include/asm-x86/setup.h
===================================================================
@@ -19,6 +19,9 @@ static inline int is_visws_box(void) { r
 /*
  * Any setup quirks to be performed?
  */
+struct mpc_config_processor;
+struct mpc_config_bus;
+struct mp_config_oemtable;
 struct x86_ops {
 	int (*arch_time_init)(void);
 	int (*arch_pre_intr_init)(void);

@@ -27,6 +30,13 @@ struct x86_ops {
 	char * (*arch_memory_setup)(void);
 	int (*mach_get_smp_config)(unsigned int early);
 	int (*mach_find_smp_config)(unsigned int reserve);
+
+	int *mpc_record;
+	int (*mpc_apic_id)(struct mpc_config_processor *m);
+	void (*mpc_oem_bus_info)(struct mpc_config_bus *m, char *name);
+	void (*mpc_oem_pci_bus)(struct mpc_config_bus *m);
+	void (*smp_read_mpc_oem)(struct mp_config_oemtable *oemtable,
+                                    unsigned short oemsize);
 };
 
 extern struct x86_ops *x86_ops;

Index: linux-2.6/arch/x86/kernel/numaq_32.c
===================================================================
@@ -84,6 +84,12 @@ void __init numaq_tsc_disable(void)
 	}
 }
 
+static int __init numaq_pre_time_init(void)
+{
+	numaq_tsc_disable();
+	return 0;
+}
+
 int found_numaq;
 /*
  * Have to match translation table entries to main table entries by counter

@@ -224,6 +230,7 @@ static void __init smp_read_mpc_oem(stru
 }
 
 static struct x86_ops numaq_x86_ops __initdata = {
+	.arch_pre_time_init	= numaq_pre_time_init,
 	.arch_time_init		= NULL,
 	.arch_pre_intr_init	= NULL,
 	.arch_memory_setup	= NULL,

Index: linux-2.6/arch/x86/kernel/setup.c
===================================================================
@@ -858,14 +858,6 @@ void __init setup_arch(char **cmdline_p)
 	init_cpu_to_node();
 #endif
 
-#ifdef CONFIG_X86_NUMAQ
-	/*
-	 * need to check online nodes num, call it
-	 * here before time_init/tsc_init
-	 */
-	numaq_tsc_disable();
-#endif
-
 	init_apic_mappings();
 	ioapic_init_mappings();
 

Index: linux-2.6/arch/x86/kernel/time_32.c
===================================================================
@@ -129,6 +129,7 @@ void __init hpet_time_init(void)
  */
 void __init time_init(void)
 {
+	pre_time_init_hook();
 	tsc_init();
 	late_time_init = choose_time_init();
 }

Index: linux-2.6/arch/x86/mach-default/setup.c
===================================================================
@@ -103,6 +103,16 @@ static struct irqaction irq0  = {
 };
 
 /**
+ * pre_time_init_hook - do any specific initialisations before.
+ *
+ **/
+void __init pre_time_init_hook(void)
+{
+	if (x86_ops->arch_pre_time_init)
+		x86_ops->arch_pre_time_init();
+}
+
+/**
  * time_init_hook - do any specific initialisations for the system timer.
  *
  * Description:

Index: linux-2.6/include/asm-x86/arch_hooks.h
===================================================================
@@ -21,6 +21,7 @@ extern void intr_init_hook(void);
 extern void pre_intr_init_hook(void);
 extern void pre_setup_arch_hook(void);
 extern void trap_init_hook(void);
+extern void pre_time_init_hook(void);
 extern void time_init_hook(void);
 extern void mca_nmi_hook(void);
 

Index: linux-2.6/include/asm-x86/setup.h
===================================================================
@@ -23,6 +23,7 @@ struct mpc_config_processor;
 struct mpc_config_bus;
 struct mp_config_oemtable;
 struct x86_ops {
+	int (*arch_pre_time_init)(void);
 	int (*arch_time_init)(void);
 	int (*arch_pre_intr_init)(void);
 	int (*arch_intr_init)(void);