Skip to contentSkip to conversation

blackfin and USB

DISCUSSION [email protected] 2 participants 2 messages Jul 21, 2008

lore
Share & tools
lore
#0 lore raw

Hi there

I am trying to configure kernel for Blackfin (BF533). I cannot enable USB driver for host (any) till i enable PCI (and in fact there is no PCI on blackfin). Even if i enable it, i will have:

  CC      drivers/pci/access.o
  CC      drivers/pci/bus.o
  CC      drivers/pci/probe.o

drivers/pci/probe.c: In function 'pci_scan_slot':
drivers/pci/probe.c:1024: error: implicit declaration of function 'pcibios_scan_all_fns'

I guess there must be a way to enable devices without enabling PCI (logically correct), or it must not call this function.

I am using 2.6.26 vanilla kernel.
Btw is networking works on Blackfin with vanilla?

#1 lore raw
Quoted 1 line · On Sun, Jul 20, 2008 at 9:55 PM, <[email protected]> wrote:

I am trying to configure kernel for Blackfin (BF533). I cannot enable USB driver for host (any)

add this to drivers/usb/Kconfig:USB_ARCH_HAS_HCD
default y if BLACKFIN

Quoted 2 lines

till i enable PCI (and in fact there is no PCI on blackfin). Even if i enable it, i will have:

dont enable it

Quoted 1 line

Btw is networking works on Blackfin with vanilla?

"networking" works. specific driver is up to you to see if it works. -mike