ucc_geth: do not touch net queue in adjust_link phylib callback
Subsystems (2)
PATCH 2/3 ucc_geth: do not touch net queue in adjust_link phylib callback
If the net queue has not been started, we'll get this nice oops and non-working ethernet:
------------[ cut here ]------------ Kernel BUG at c01f4648 [verbose debug info unavailable] Oops: Exception in kernel mode, sig: 5 [#1] MPC836x RDK Modules linked in: NIP: c01f4648 LR: c01c0a10 CTR: c01c08e4 REGS: cf839e40 TRAP: 0700 Not tainted (2.6.26-05254-gc7b9969) MSR: 00021032 <ME,IR,DR> CR: 22042044 XER: 00000000
TASK = cf828c30[4] 'events/0' THREAD: cf838000
GPR00: c01c0a10 cf839ef0 cf828c30 c035ceb0 cf8469a0 00000064 00000000 00000000
GPR08: c035ceb0 00000001 00000001 cf99c280 22044044 7ca81020 0fffc000 00000000
GPR16: 0fff2544 0fff63c0 00000000 0fff78e0 0ffa5580 00000004 00000000 00000000
GPR24: 02082000 cf9d0000 d1068000 00009032 cf846800 cf846b80 00000001 00000014 NIP [c01f4648] __netif_schedule+0x28/0x8c
LR [c01c0a10] adjust_link+0x12c/0x1e4
Call Trace:
[cf839ef0] [c0380f50] 0xc0380f50 (unreliable)
[cf839f10] [c01c0a10] adjust_link+0x12c/0x1e4
[cf839f40] [c01c2628] phy_state_machine+0x2e0/0x448 [cf839f60] [c00425e8] run_workqueue+0xc8/0x168
[cf839f90] [c0042c6c] worker_thread+0x70/0xd0
[cf839fd0] [c0046954] kthread+0x48/0x84
[cf839ff0] [c0012488] kernel_thread+0x44/0x60
Instruction dump:7c0803a6 4e800020 3d20c036 9421ffe0 7c0802a6 7c681b78 3929ceb0 7c694a78 7d290034 90010024 bfa10014 5529d97e <0f090000> 39600002 38030024 7d200028
---[ end trace a57d367843bd2904 ]---
Since the driver is using phylib (which is doing netif_carrier_on/off()), we should simply remove netif_tx_schedule_all() from adjust_link().
--- drivers/net/ucc_geth.c | 1 - 1 files changed, 0 insertions(+), 1 deletions(-)
drivers/net/ucc_geth.c +0 -1
@@ -1588,7 +1588,6 @@ static void adjust_link(struct net_device *dev)if (!ugeth->oldlink) { new_state =1 ; ugeth->oldlink =1 ; -netif_tx_schedule_all (dev); } }else if (ugeth->oldlink) { new_state =1 ;
Signature · 1 line
1.5.5.4
David Miller
maintainerFrom: Anton Vorontsov <[email protected]>
Date: Mon, 21 Jul 2008 19:17:35 +0400
Quoted 2 lines
If the net queue has not been started, we'll get this nice oops and non-working ethernet:
...
Quoted 4 lines
Since the driver is using phylib (which is doing netif_carrier_on/off()), we should simply remove
netif_tx_schedule_all()fromadjust_link().Signed-off-by Anton Vorontsov <[email protected]>
Also applied, thanks.