x86_64: 2.6.26-git8 + AMD C1E = boot problem
Hello everybody,
my notebook ASUS F3T with AMD Turion64 X2 processor hang on during boot with linux-2.6.26-git8 for x86_64. The last messages i see:
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
hpet0: 3 32-bit timers, 25000000 Hz
ACPI: RTC can wake from S4
I found 3 way to boot
* pass "noapictimer" kernel parameter, this disable tickless. so i get the same behavior as in 2.6.25 and early kernels.
* pass "idle=poll", results in tickless enabled, but power consumption arised.
* pass "idle=halt", results in necessity of regular button pressing to continue booting.
See attachments for my kernel configuration and dmesg output for "noapictimer" and "idle=poll" cases.
Linux version 2.6.26-git8 (root@aspid) (gcc version 4.3.1 (Debian 4.3.1-2) ) #6 SMP PREEMPT Tue Jul 22 02:09:26 MSD 2008
Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.26-git8 root=UUID=ab3ca6c5-8b16-456b-8cc2-d68b130df7b6 ro resume=/dev/sda1 vga=normal nosplash idle=poll apic=debug BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ffa0000 (usable)
BIOS-e820: 000000003ffa0000 - 000000003ffae000 (ACPI data)
BIOS-e820: 000000003ffae000 - 000000003fff0000 (ACPI NVS)
BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
using polling idle threads.last_pfn = 0x3ffa0 max_arch_pfn = 0x3ffffffff
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106init_memory_mapping
0000000000 - 003fe00000 page 2M
003fe00000 - 003ffa0000 page 4k
kernel direct mapping tables up to 3ffa0000 @ 8000-b000last_map_addr: 3ffa0000 end: 3ffa0000
RAMDISK: 2f9eb000 - 2fff79a0
DMI 2.4 present.
ACPI: RSDP 000FBB20, 0014 (r0 ACPIAM)
ACPI: RSDT 3FFA0000, 0040 (r1 _ASUS_ Notebook 4000724 MSFT 97)
ACPI: FACP 3FFA0200, 0084 (r2 A M I OEMFACP 4000724 MSFT 97)
ACPI: DSDT 3FFA05F0, 916E (r1 A0427 A0427000 0 INTL 2002026)
ACPI: FACS 3FFAE000, 0040
ACPI: APIC 3FFA0390, 0070 (r1 A M I OEMAPIC 4000724 MSFT 97)
ACPI: MCFG 3FFA0400, 003C (r1 A M I OEMMCFG 4000724 MSFT 97)
ACPI: BOOT 3FFA05C0, 0028 (r1 A M I OEMBOOT 4000724 MSFT 97)
ACPI: SLIC 3FFA0440, 0176 (r1 _ASUS_ Notebook 4000724 MSFT 97)
ACPI: OEMB 3FFAE040, 0060 (r1 A M I AMI_OEM 4000724 MSFT 97)
ACPI: HPET 3FFA9760, 0038 (r1 A M I OEMHPET0 4000724 MSFT 97)
Entering add_active_range(0, 0x0, 0x9f) 0 entries of 256 used
Entering add_active_range(0, 0x100, 0x3ffa0) 1 entries of 256 used
(6 early reservations) ==> bootmem [0000000000 - 003ffa0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0000200000 - 0000b70c48] TEXT DATA BSS ==> [0000200000 - 0000b70c48]
#3 [002f9eb000 - 002fff79a0] RAMDISK ==> [002f9eb000 - 002fff79a0]
#4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#5 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000]
Scan SMP from ffff880000000000 for 1024 bytes.
Scan SMP from ffff88000009fc00 for 1024 bytes.
Scan SMP from ffff8800000f0000 for 65536 bytes.
found SMP MP-table at [ffff8800000ff780] 000ff780
[ffffe20000000000-ffffe20000dfffff] PMD -> [ffff880001200000-ffff880001ffffff] on node 0
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x0003ffa0On node 0 totalpages: 261951
DMA zone: 56 pages used for memmap
DMA zone: 2518 pages reserved
DMA zone: 1425 pages, LIFO batch:0
DMA32 zone: 3527 pages used for memmap
DMA32 zone: 254425 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x508
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
Bus #0 is ISA
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x10de8201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
mapped APIC to ffffffffff5fc000 ( fee00000)
mapped IOAPIC to ffffffffff5fb000 (00000000fec00000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
PERCPU: Allocating 442688 bytes of per cpu dataNR_CPUS: 2, nr_cpu_ids: 2, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 255850
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.26-git8 root=UUID=ab3ca6c5-8b16-456b-8cc2-d68b130df7b6 ro resume=/dev/sda1 vga=normal nosplash idle=poll apic=debug Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
TSC calibrated against PM_TIMER
Detected 1607.314 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES: 8
... MAX_LOCK_DEPTH: 48
... MAX_LOCKDEP_KEYS: 2048
... CLASSHASH_SIZE: 1024
... MAX_LOCKDEP_ENTRIES: 8192 ... MAX_LOCKDEP_CHAINS: 16384 ... CHAINHASH_SIZE: 8192
memory used by lock dependency info: 1840 kB
per task-struct memory footprint: 3456 bytes
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 242000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Memory: 1014408k/1048192k available (2575k kernel code, 32868k reserved, 1556k data, 728k init)
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
hpet clockevent registered
Calibrating delay loop (skipped), value calculated using timer frequency.. <6>3214.62 BogoMIPS (lpj=16073140) Security Framework initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ACPI: Core revision 20080609
Getting VERSION: 80050010
Getting VERSION: 80050010
Getting ID: 0
Getting ID: ff000000
Getting LVT0: 700
Getting LVT1: 400
enabled ExtINT on CPU#0
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0 not connected.
IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:1 Active:0)
IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0)
IO-APIC (apicid-pin) 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-52 stepping 02
Using local APIC timer interrupts.
APIC timer calibration result 12557255
Detected 12.557 MHz APIC timer.
++++++++++++++++++++=_---CPU UP 1
lockdep: fixing up alternatives.
Booting processor 1/1 ip 6000
Setting warm reset code and vector.
1.
2.
3.
Asserting INIT.
Waiting for send to finish...
Deasserting INIT.
Waiting for send to finish...
#startup loops: 2.
Sending STARTUP #1.
After apic_write.
Initializing CPU#1
CPU#1 (phys ID: 1) waiting for CALLOUT
Startup point 1.
Waiting for send to finish...
Sending STARTUP #2.
After apic_write.
Startup point 1.
Waiting for send to finish...
After Startup.
Before Callout 1.
After Callout 1.
CALLIN, before setup_local_APIC().
masked ExtINT on CPU#1
Calibrating delay using timer specific routine.. <6>3214.75 BogoMIPS (lpj=16073762)
Stack at about ffff88003f89bf44
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
OK.
CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-52 stepping 02
CPU has booted.
Brought up 2 CPUs
Boot done.
Before bogomips.
Total of 2 processors activated (6429.38 BogoMIPS).
Before bogocount - setting activated=1.
CPU0 attaching sched-domain:
domain 0: span 0-1 level CPU
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level CPU
groups: 1 0net_namespace: 1576 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
node 0 link 0: io port [1000, ffffff]
TOM: 0000000040000000 aka 1024M
node 0 link 0: mmio [e0000000, efffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [40000000, fe0bffff]
bus: [00,ff] on node 0 link 0
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [40000000, fcffffffff]
bus: 00 index 2 mmio: [a0000, bffff]
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: BIOS Bug: MCFG area at e0000000 is not reserved in ACPI motherboard resources
PCI: Not using MMCONFIG.
ACPI: EC: GPE = 0x20, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:0a.1: PME# supported from D3hot D3cold
pci 0000:00:0a.1: PME# disabled
pci 0000:00:0b.0: supports D1
pci 0000:00:0b.0: supports D2
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0b.1: supports D1
pci 0000:00:0b.1: supports D2
pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.1: PME# disabled
pci 0000:00:10.1: PME# supported from D3hot D3cold
pci 0000:00:10.1: PME# disabled
pci 0000:00:14.0: supports D1
pci 0000:00:14.0: supports D2
pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:14.0: PME# disabled
pci 0000:05:01.0: PME# supported from D0 D3hot D3cold
pci 0000:05:01.0: PME# disabled
pci 0000:05:01.1: supports D1
pci 0000:05:01.1: supports D2
pci 0000:05:01.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:01.1: PME# disabled
pci 0000:05:01.2: supports D1
pci 0000:05:01.2: supports D2
pci 0000:05:01.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:01.2: PME# disabled
pci 0000:05:01.3: supports D1
pci 0000:05:01.3: supports D2
pci 0000:05:01.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:01.3: PME# disabled
pci 0000:00:10.0: transparent bridge
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 16) *5
ACPI: PCI Interrupt Link [LNKB] (IRQs 17) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [LNEA] (IRQs 18) *11
ACPI: PCI Interrupt Link [LNEB] (IRQs 19) *11
ACPI: PCI Interrupt Link [LNEC] (IRQs 5) *0, disabled.
ACPI: PCI Interrupt Link [LNED] (IRQs 11) *0, disabled.
ACPI: PCI Interrupt Link [LUB0] (IRQs 10) *11
ACPI: PCI Interrupt Link [LUB2] (IRQs 20) *7
ACPI: PCI Interrupt Link [LMAC] (IRQs 21) *5
ACPI: PCI Interrupt Link [LAZA] (IRQs 22) *5
ACPI: PCI Interrupt Link [LACI] (IRQs 22) *0, disabled.
ACPI: PCI Interrupt Link [LMC9] (IRQs 7) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 7) *5
ACPI: PCI Interrupt Link [LPMU] (IRQs 7) *10
ACPI: PCI Interrupt Link [LSA0] (IRQs 23) *10
ACPI: PCI Interrupt Link [LSA1] (IRQs 23) *0, disabled.
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
number of MP IRQ sources: 15.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
.... register #01: 00170011
....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011
.... register #02: 02000000
....... : arbitration: 02
.... IRQ redirection table:
NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
00 000 1 0 0 0 0 0 0 00 01 003 0 0 0 0 0 1 1 31 02 003 0 0 0 0 0 1 1 30 03 003 0 0 0 0 0 1 1 33 04 003 0 0 0 0 0 1 1 34 05 003 1 0 0 0 0 1 1 35 06 003 0 0 0 0 0 1 1 36 07 003 1 0 0 0 0 1 1 37 08 003 0 0 0 0 0 1 1 38 09 003 0 1 0 0 0 1 1 39 0a 003 1 0 0 0 0 1 1 3A 0b 003 1 0 0 0 0 1 1 3B 0c 003 0 0 0 0 0 1 1 3C 0d 003 0 0 0 0 0 1 1 3D 0e 003 0 0 0 0 0 1 1 3E 0f 003 0 0 0 0 0 1 1 3F 10 000 1 0 0 0 0 0 0 00 11 000 1 0 0 0 0 0 0 00 12 000 1 0 0 0 0 0 0 00 13 000 1 0 0 0 0 0 0 00 14 000 1 0 0 0 0 0 0 00 15 000 1 0 0 0 0 0 0 00 16 000 1 0 0 0 0 0 0 00 17 000 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default
DMAR:parse DMAR table failure.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
hpet0: 3 32-bit timers, 25000000 Hz
Switched to high resolution mode on CPU 0
ACPI: RTC can wake from S4
Switched to high resolution mode on CPU 1
system 00:07: ioport range 0x25c-0x25f has been reserved system 00:09: ioport range 0x4d0-0x4d1 has been reserved system 00:09: ioport range 0x800-0x80f has been reserved system 00:09: ioport range 0x500-0x57f has been reserved system 00:09: ioport range 0x580-0x5ff has been reserved system 00:09: ioport range 0x800-0x87f could not be reserved system 00:09: ioport range 0x880-0x8ff has been reserved system 00:09: ioport range 0x900-0x97f has been reserved system 00:09: ioport range 0x980-0x9ff has been reserved system 00:09: iomem range 0xfee01000-0xfeefffff could not be reserved system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved system 00:0c: iomem range 0xe0000000-0xe7ffffff has been reserved system 00:0d: iomem range 0x0-0x9ffff could not be reserved system 00:0d: iomem range 0xc0000-0xcffff has been reserved system 00:0d: iomem range 0xe0000-0xfffff could not be reserved system 00:0d: iomem range 0x100000-0x3fffffff could not be reserved system 00:0d: iomem range 0xff780000-0xffffffff could not be reserved pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
pci 0000:00:02.0: IO window: disabled pci 0000:00:02.0: MEM window: 0xdc700000-0xdc7fffff pci 0000:00:02.0: PREFETCH window: disabled pci 0000:00:03.0: PCI bridge, secondary bus 0000:02 pci 0000:00:03.0: IO window: 0xd000-0xdfff pci 0000:00:03.0: MEM window: 0xdc800000-0xdcffffff pci 0000:00:03.0: PREFETCH window: 0x000000be000000-0x000000bfffffff pci 0000:00:04.0: PCI bridge, secondary bus 0000:04 pci 0000:00:04.0: IO window: 0xe000-0xefff pci 0000:00:04.0: MEM window: 0xdd000000-0xdfefffff pci 0000:00:04.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff pci 0000:00:10.0: PCI bridge, secondary bus 0000:05 pci 0000:00:10.0: IO window: disabled pci 0000:00:10.0: MEM window: 0xdff00000-0xdfffffff pci 0000:00:10.0: PREFETCH window: disabled
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Setting latency timer of device 0000:00:04.0 to 64
PCI: Setting latency timer of device 0000:00:10.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 10, 4194304 bytes)
TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs... it is
Freeing initrd memory: 6194k freed
Simple Boot Flag at 0x4c set to 0x1
IA-32 Microcode Update Driver: v1.14a <[email protected]>
microcode: CPU0 not a capable Intel processor
microcode: CPU1 not a capable Intel processor
audit: initializing netlink socket (disabled)
type=2000 audit(1216685656.320:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 1994
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:00.0: Enabling HT MSI Mapping
pci 0000:00:02.0: Enabling HT MSI Mapping
pci 0000:00:03.0: Enabling HT MSI Mapping
pci 0000:00:04.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Enabling HT MSI Mapping
pci 0000:00:0e.0: Enabling HT MSI Mapping
pci 0000:00:10.0: Enabling HT MSI Mapping
pci 0000:00:10.1: Enabling HT MSI Mapping
pci 0000:04:00.0: Boot video device
PCI: Setting latency timer of device 0000:00:02.0 to 64 pcieport-driver 0000:00:02.0: found MSI capability pci_express 0000:00:02.0:pcie00: allocate port service
PCI: Setting latency timer of device 0000:00:03.0 to 64 pcieport-driver 0000:00:03.0: found MSI capability pci_express 0000:00:03.0:pcie00: allocate port service
PCI: Setting latency timer of device 0000:00:04.0 to 64 pcieport-driver 0000:00:04.0: found MSI capability pci_express 0000:00:04.0:pcie00: allocate port service
ALI M7101 PMU not found.
uvesafb: failed to execute /sbin/v86d
uvesafb: make sure that the v86d helper is installed and executable
uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
uvesafb: vbe_init() failed with -22
uvesafb: probe of uvesafb.0 failed with error -22
vga16fb: initializing
vga16fb: mapped to 0xffff8800000a0000
Console: switching to colour frame buffer device 80x30
fb0: VGA16 VGA frame buffer device
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: ACPI0007:01 is registered as cooling_device1
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (60 C)hpet_resources: 0xfed00000 is busy
Linux agpgart interface v0.103
Serial: 8250/16550 driver4 ports, IRQ sharing disabled
brd: module loaded
asus-laptop: Asus Laptop Support version 0.42
asus-laptop: F3T model detected
ACPI: EC: non-query interrupt received, switching to interrupt mode Registered led device: asus::mail
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all micertc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k
cpuidle: using governor ladder
cpuidle: using governor menu
TCP bic registered
NET: Registered protocol family 17 powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-52 processors (2 cpu cores) (version 2.20.00) powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x13 input: AT Translated Set 2 keyboard as /class/input/input0 powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x1e
rtc_cmos 00:02: setting system clock to 2008-07-22 00:14:17 UTC (1216685657)
Freeing unused kernel memory: 728k freed
powernow-k8: ph2 null fid transition 0x8
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
No dock devices found.
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 20
IOAPIC[0]: Set routing entry (2-20 -> 0x61 -> IRQ 20 Mode:1 Active:1)ehci_hcd 0000:00:0b.1: PCI INT B -> Link[LUB2] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:0b.1 to 64ehci_hcd 0000:00:0b.1: EHCI Host Controllerehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
ricoh-mmc: Ricoh MMC Controller disabling driverehci_hcd 0000:00:0b.1: debug port 1
ricoh-mmc: Copyright(c) Philip Langdaleehci_hcd 0000:00:0b.1: cache line size of 64 is not supportedehci_hcd 0000:00:0b.1: irq 20, io mem 0xdc6bfc00ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driverehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
SCSI subsystem initialized
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
libata version 3.00 loaded.
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.26-git8 ehci_hcd
usb usb1: SerialNumber: 0000:00:0b.1
sdhci-pci 0000:05:01.1: SDHCI controller found [1180:0822] (rev 19)
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 17
IOAPIC[0]: Set routing entry (2-17 -> 0x69 -> IRQ 17 Mode:1 Active:1)
sdhci-pci 0000:05:01.1: PCI INT B -> Link[LNKB] -> GSI 17 (level, low) -> IRQ 17
Registered led device: mmc0
mmc0: SDHCI controller on PCI [0000:05:01.1] using PIO
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 16
IOAPIC[0]: Set routing entry (2-16 -> 0x71 -> IRQ 16 Mode:1 Active:1)firewire_ohci 0000:05:01.0: PCI INT A -> Link[LNKA] -> GSI 16 (level, low) -> IRQ 16pata_amd 0000:00:0d.0: version 0.3.10
PCI: Setting latency timer of device 0000:00:0d.0 to 64
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15firewire_ohci: Added fw-ohci device 0000:05:01.0, OHCI version 1.0
usb 1-7: new high speed USB device using ehci_hcd and address 3
ata2.00: ATAPI: HL-DT-ST DVDRAM GMA-4082N, HJ02, max UDMA/33
ata2: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc000) ACPI=0x701f (60:900:0x11)
ata2.00: configured for UDMA/33
isa bounce pool size: 16 pages
scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GMA-4082N HJ02 PQ: 0 ANSI: 5
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
IOAPIC[0]: Set routing entry (2-21 -> 0x79 -> IRQ 21 Mode:1 Active:1)
forcedeth 0000:00:14.0: PCI INT A -> Link[LMAC] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:14.0 to 64
usb 1-7: configuration #1 chosen from 1 choice
usb 1-7: New USB device found, idVendor=05e1, idProduct=0501
usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-7: Product: USB 2.0 Image Capture Controllerfirewire_core: created device fw0: GUID 00e0180003715a18, S400
usb 1-7: Manufacturer: Syntek Semiconductor
forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 66:77:44:22:33:11
forcedeth 0000:00:14.0: highdma pwrctl timirq gbit lnktim desc-v3
ricoh-mmc: Ricoh MMC controller found at 0000:05:01.2 [1180:0843] (rev 1)
udev: renamed network interface eth0 to eth1
ricoh-mmc: Controller is now disabled.sata_nv 0000:00:0e.0: version 3.5
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
IOAPIC[0]: Set routing entry (2-23 -> 0x81 -> IRQ 23 Mode:1 Active:1)sata_nv 0000:00:0e.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23sata_nv 0000:00:0e.0: Using SWNCQ mode
PCI: Setting latency timer of device 0000:00:0e.0 to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc000 irq 23
ata4: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xc008 irq 23
Clocksource tsc unstable (delta = -246263808 ns)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-7: HTS541010G9SA00, MBZOC60R, max UDMA/100
ata3.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/100
ata4: SATA link down (SStatus 0 SControl 300)
scsi 2:0:0:0: Direct-Access ATA HTS541010G9SA00 MBZO PQ: 0 ANSI: 5
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 10
IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:1 Active:1)ohci_hcd 0000:00:0b.0: PCI INT A -> Link[LUB0] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:0b.0 to 64ohci_hcd 0000:00:0b.0: OHCI Host Controllerohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2ohci_hcd 0000:00:0b.0: irq 10, io mem 0xdc6be000
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
sr 1:0:0:0: Attached scsi generic sg0 type 5
scsi 2:0:0:0: Attached scsi generic sg1 type 0
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.26-git8 ohci_hcd
usb usb2: SerialNumber: 0000:00:0b.0
Driver 'sd' needs updating - please use bus_type methods
sd 2:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:<6>usb 2-3: new low speed USB device using ohci_hcd and address 2
sda1 sda2 sda3 <<6>usb 2-3: configuration #1 chosen from 1 choice
sda5<6>usb 2-3: New USB device found, idVendor=046d, idProduct=c019
sda6<6>usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3: Product: Logitech USB Optical Mouse
sda7 > sda4
sd 2:0:0:0: [sda] Attached SCSI disk
usb 2-3: Manufacturer: Logitech
usbcore: registered new interface driver hiddev
input: Logitech Logitech USB Optical Mouse as /class/input/input1
input,hidraw0: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:0b.0-3
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
PM: Starting manual resume from disk
ReiserFS: sda2: found reiserfs format "3.6" with standard journal
ReiserFS: sda2: using ordered data mode
ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda2: checking transaction log (sda2)
ReiserFS: sda2: replayed 50 transactions in 11 seconds
ReiserFS: sda2: Using r5 hash to sort names
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /class/input/input3
ACPI: Sleep Button (CM) [SLPB]
ACPI: WMI: Mapper loaded
ACPI: Battery Slot [BAT0] (battery present)
input: Lid Switch as /class/input/input4
ACPI: device:09 is registered as cooling_device2
input: Video Bus as /class/input/input5
ACPI: Lid Switch [LID]
input: Power Button (CM) as /class/input/input6
ACPI: I/O resource nForce2_smbus [0x600-0x63f] conflicts with ACPI region SMRG [0x600-0x60f]
ACPI: Device needs an ACPI driver
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x600
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x700
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
ACPI: AC Adapter [AC0] (on-line)
ACPI: Power Button (CM) [PWRB]
input: PC Speaker as /class/input/input7
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
IOAPIC[0]: Set routing entry (2-22 -> 0x89 -> IRQ 22 Mode:1 Active:1)
HDA Intel 0000:00:10.1: PCI INT B -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:10.1 to 64
input: PS/2 Mouse as /class/input/input8
input: AlpsPS/2 ALPS GlidePoint as /class/input/input9
Adding 1574328k swap on /dev/sda1. Priority:-1 extents:1 across:1574328k
loop: module loaded
fuse init (API version 7.9)
ReiserFS: sda4: found reiserfs format "3.6" with standard journal
ReiserFS: sda4: using ordered data mode
ReiserFS: sda4: journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda4: checking transaction log (sda4)
ReiserFS: sda4: Using r5 hash to sort names
ReiserFS: sda5: found reiserfs format "3.6" with standard journal
ReiserFS: sda5: using ordered data mode
ReiserFS: sda5: journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda5: checking transaction log (sda5)
ReiserFS: sda5: Using r5 hash to sort names
ReiserFS: sda6: found reiserfs format "3.6" with standard journal
ReiserFS: sda6: using ordered data mode
ReiserFS: sda6: journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda6: checking transaction log (sda6)
ReiserFS: sda6: Using r5 hash to sort names
ReiserFS: sda7: found reiserfs format "3.6" with standard journal
ReiserFS: sda7: using ordered data mode
ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda7: checking transaction log (sda7)
ReiserFS: sda7: Using r5 hash to sort names
IPv4 FIB: Using LC-trie version 0.408
eth1: no link during initialization.
eth1: no link during initialization.
eth1: no link during initialization.
eth1: no link during initialization.
NET: Registered protocol family 10
lo: Disabled Privacy ExtensionsADDRCONF(NETDEV_UP): eth1: link is not ready
warning: `ntpd' uses 32-bit capabilities (legacy support in use)
Bluetooth: Core ver 2.12
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.10
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.10
Linux version 2.6.26-git8 (root@aspid) (gcc version 4.3.1 (Debian 4.3.1-2) ) #6 SMP PREEMPT Tue Jul 22 02:09:26 MSD 2008
Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.26-git8 root=UUID=ab3ca6c5-8b16-456b-8cc2-d68b130df7b6 ro resume=/dev/sda1 vga=normal nosplash noapictimer apic=debug BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ffa0000 (usable)
BIOS-e820: 000000003ffa0000 - 000000003ffae000 (ACPI data)
BIOS-e820: 000000003ffae000 - 000000003fff0000 (ACPI NVS)
BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHaulslast_pfn = 0x3ffa0 max_arch_pfn = 0x3ffffffff
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106init_memory_mapping
0000000000 - 003fe00000 page 2M
003fe00000 - 003ffa0000 page 4k
kernel direct mapping tables up to 3ffa0000 @ 8000-b000last_map_addr: 3ffa0000 end: 3ffa0000
RAMDISK: 2f9eb000 - 2fff79a0
DMI 2.4 present.
ACPI: RSDP 000FBB20, 0014 (r0 ACPIAM)
ACPI: RSDT 3FFA0000, 0040 (r1 _ASUS_ Notebook 4000724 MSFT 97)
ACPI: FACP 3FFA0200, 0084 (r2 A M I OEMFACP 4000724 MSFT 97)
ACPI: DSDT 3FFA05F0, 916E (r1 A0427 A0427000 0 INTL 2002026)
ACPI: FACS 3FFAE000, 0040
ACPI: APIC 3FFA0390, 0070 (r1 A M I OEMAPIC 4000724 MSFT 97)
ACPI: MCFG 3FFA0400, 003C (r1 A M I OEMMCFG 4000724 MSFT 97)
ACPI: BOOT 3FFA05C0, 0028 (r1 A M I OEMBOOT 4000724 MSFT 97)
ACPI: SLIC 3FFA0440, 0176 (r1 _ASUS_ Notebook 4000724 MSFT 97)
ACPI: OEMB 3FFAE040, 0060 (r1 A M I AMI_OEM 4000724 MSFT 97)
ACPI: HPET 3FFA9760, 0038 (r1 A M I OEMHPET0 4000724 MSFT 97)
Entering add_active_range(0, 0x0, 0x9f) 0 entries of 256 used
Entering add_active_range(0, 0x100, 0x3ffa0) 1 entries of 256 used
(6 early reservations) ==> bootmem [0000000000 - 003ffa0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0000200000 - 0000b70c48] TEXT DATA BSS ==> [0000200000 - 0000b70c48]
#3 [002f9eb000 - 002fff79a0] RAMDISK ==> [002f9eb000 - 002fff79a0]
#4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#5 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000]
Scan SMP from ffff880000000000 for 1024 bytes.
Scan SMP from ffff88000009fc00 for 1024 bytes.
Scan SMP from ffff8800000f0000 for 65536 bytes.
found SMP MP-table at [ffff8800000ff780] 000ff780
[ffffe20000000000-ffffe20000dfffff] PMD -> [ffff880001200000-ffff880001ffffff] on node 0
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x0003ffa0On node 0 totalpages: 261951
DMA zone: 56 pages used for memmap
DMA zone: 2518 pages reserved
DMA zone: 1425 pages, LIFO batch:0
DMA32 zone: 3527 pages used for memmap
DMA32 zone: 254425 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x508
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
Bus #0 is ISA
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x10de8201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
mapped APIC to ffffffffff5fc000 ( fee00000)
mapped IOAPIC to ffffffffff5fb000 (00000000fec00000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
PERCPU: Allocating 442688 bytes of per cpu dataNR_CPUS: 2, nr_cpu_ids: 2, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 255850
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.26-git8 root=UUID=ab3ca6c5-8b16-456b-8cc2-d68b130df7b6 ro resume=/dev/sda1 vga=normal nosplash noapictimer apic=debug Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
TSC calibrated against PM_TIMER
Detected 1607.308 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES: 8
... MAX_LOCK_DEPTH: 48
... MAX_LOCKDEP_KEYS: 2048
... CLASSHASH_SIZE: 1024
... MAX_LOCKDEP_ENTRIES: 8192 ... MAX_LOCKDEP_CHAINS: 16384 ... CHAINHASH_SIZE: 8192
memory used by lock dependency info: 1840 kB
per task-struct memory footprint: 3456 bytes
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 242000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Memory: 1014408k/1048192k available (2575k kernel code, 32868k reserved, 1556k data, 728k init)
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
hpet clockevent registered
Calibrating delay loop (skipped), value calculated using timer frequency.. <6>3214.61 BogoMIPS (lpj=16073080) Security Framework initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
using C1E aware idle routine
ACPI: Core revision 20080609
Getting VERSION: 80050010
Getting VERSION: 80050010
Getting ID: 0
Getting ID: ff000000
Getting LVT0: 700
Getting LVT1: 400
enabled ExtINT on CPU#0
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0 not connected.
IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:1 Active:0)
IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0)
IO-APIC (apicid-pin) 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-52 stepping 02
Disabling APIC timer
++++++++++++++++++++=_---CPU UP 1
lockdep: fixing up alternatives.
Booting processor 1/1 ip 6000
Setting warm reset code and vector.
1.
2.
3.
Asserting INIT.
Waiting for send to finish...
Deasserting INIT.
Waiting for send to finish...
#startup loops: 2.
Sending STARTUP #1.
After apic_write.
Initializing CPU#1
CPU#1 (phys ID: 1) waiting for CALLOUT
Startup point 1.
Waiting for send to finish...
Sending STARTUP #2.
After apic_write.
Startup point 1.
Waiting for send to finish...
After Startup.
Before Callout 1.
After Callout 1.
CALLIN, before setup_local_APIC().
masked ExtINT on CPU#1
Calibrating delay using timer specific routine.. <6>3214.77 BogoMIPS (lpj=16073864)
Stack at about ffff88003f89bf44
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
System has C1E enabled
OK.
CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-52 stepping 02
CPU has booted.
Brought up 2 CPUs
Boot done.
Before bogomips.
Total of 2 processors activated (6429.38 BogoMIPS).
Before bogocount - setting activated=1.
CPU0 attaching sched-domain:
domain 0: span 0-1 level CPU
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level CPU
groups: 1 0net_namespace: 1576 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
node 0 link 0: io port [1000, ffffff]
TOM: 0000000040000000 aka 1024M
node 0 link 0: mmio [e0000000, efffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [40000000, fe0bffff]
bus: [00,ff] on node 0 link 0
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [40000000, fcffffffff]
bus: 00 index 2 mmio: [a0000, bffff]
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
Switch to broadcast mode on CPU1
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: BIOS Bug: MCFG area at e0000000 is not reserved in ACPI motherboard resources
PCI: Not using MMCONFIG.
Switch to broadcast mode on CPU0
ACPI: EC: GPE = 0x20, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:0a.1: PME# supported from D3hot D3cold
pci 0000:00:0a.1: PME# disabled
pci 0000:00:0b.0: supports D1
pci 0000:00:0b.0: supports D2
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0b.1: supports D1
pci 0000:00:0b.1: supports D2
pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.1: PME# disabled
pci 0000:00:10.1: PME# supported from D3hot D3cold
pci 0000:00:10.1: PME# disabled
pci 0000:00:14.0: supports D1
pci 0000:00:14.0: supports D2
pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:14.0: PME# disabled
pci 0000:05:01.0: PME# supported from D0 D3hot D3cold
pci 0000:05:01.0: PME# disabled
pci 0000:05:01.1: supports D1
pci 0000:05:01.1: supports D2
pci 0000:05:01.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:01.1: PME# disabled
pci 0000:05:01.2: supports D1
pci 0000:05:01.2: supports D2
pci 0000:05:01.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:01.2: PME# disabled
pci 0000:05:01.3: supports D1
pci 0000:05:01.3: supports D2
pci 0000:05:01.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:01.3: PME# disabled
pci 0000:00:10.0: transparent bridge
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 16) *5
ACPI: PCI Interrupt Link [LNKB] (IRQs 17) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [LNEA] (IRQs 18) *11
ACPI: PCI Interrupt Link [LNEB] (IRQs 19) *11
ACPI: PCI Interrupt Link [LNEC] (IRQs 5) *0, disabled.
ACPI: PCI Interrupt Link [LNED] (IRQs 11) *0, disabled.
ACPI: PCI Interrupt Link [LUB0] (IRQs 10) *11
ACPI: PCI Interrupt Link [LUB2] (IRQs 20) *7
ACPI: PCI Interrupt Link [LMAC] (IRQs 21) *5
ACPI: PCI Interrupt Link [LAZA] (IRQs 22) *5
ACPI: PCI Interrupt Link [LACI] (IRQs 22) *0, disabled.
ACPI: PCI Interrupt Link [LMC9] (IRQs 7) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 7) *5
ACPI: PCI Interrupt Link [LPMU] (IRQs 7) *10
ACPI: PCI Interrupt Link [LSA0] (IRQs 23) *10
ACPI: PCI Interrupt Link [LSA1] (IRQs 23) *0, disabled.
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
number of MP IRQ sources: 15.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
.... register #01: 00170011
....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011
.... register #02: 02000000
....... : arbitration: 02
.... IRQ redirection table:
NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
00 000 1 0 0 0 0 0 0 00 01 003 0 0 0 0 0 1 1 31 02 003 0 0 0 0 0 1 1 30 03 003 0 0 0 0 0 1 1 33 04 003 0 0 0 0 0 1 1 34 05 003 1 0 0 0 0 1 1 35 06 003 0 0 0 0 0 1 1 36 07 003 1 0 0 0 0 1 1 37 08 003 0 0 0 0 0 1 1 38 09 003 0 1 0 0 0 1 1 39 0a 003 1 0 0 0 0 1 1 3A 0b 003 1 0 0 0 0 1 1 3B 0c 003 0 0 0 0 0 1 1 3C 0d 003 0 0 0 0 0 1 1 3D 0e 003 0 0 0 0 0 1 1 3E 0f 003 0 0 0 0 0 1 1 3F 10 000 1 0 0 0 0 0 0 00 11 000 1 0 0 0 0 0 0 00 12 000 1 0 0 0 0 0 0 00 13 000 1 0 0 0 0 0 0 00 14 000 1 0 0 0 0 0 0 00 15 000 1 0 0 0 0 0 0 00 16 000 1 0 0 0 0 0 0 00 17 000 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default
DMAR:parse DMAR table failure.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
hpet0: 3 32-bit timers, 25000000 Hz
ACPI: RTC can wake from S4
Clockevents: could not switch to one-shot mode: lapic is not functional. Could not switch to high resolution mode on CPU 0
Clockevents: could not switch to one-shot mode: lapic is not functional. Could not switch to high resolution mode on CPU 1
system 00:07: ioport range 0x25c-0x25f has been reserved system 00:09: ioport range 0x4d0-0x4d1 has been reserved system 00:09: ioport range 0x800-0x80f has been reserved system 00:09: ioport range 0x500-0x57f has been reserved system 00:09: ioport range 0x580-0x5ff has been reserved system 00:09: ioport range 0x800-0x87f could not be reserved system 00:09: ioport range 0x880-0x8ff has been reserved system 00:09: ioport range 0x900-0x97f has been reserved system 00:09: ioport range 0x980-0x9ff has been reserved system 00:09: iomem range 0xfee01000-0xfeefffff could not be reserved system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved system 00:0c: iomem range 0xe0000000-0xe7ffffff has been reserved system 00:0d: iomem range 0x0-0x9ffff could not be reserved system 00:0d: iomem range 0xc0000-0xcffff has been reserved system 00:0d: iomem range 0xe0000-0xfffff could not be reserved system 00:0d: iomem range 0x100000-0x3fffffff could not be reserved system 00:0d: iomem range 0xff780000-0xffffffff could not be reserved pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
pci 0000:00:02.0: IO window: disabled pci 0000:00:02.0: MEM window: 0xdc700000-0xdc7fffff pci 0000:00:02.0: PREFETCH window: disabled pci 0000:00:03.0: PCI bridge, secondary bus 0000:02 pci 0000:00:03.0: IO window: 0xd000-0xdfff pci 0000:00:03.0: MEM window: 0xdc800000-0xdcffffff pci 0000:00:03.0: PREFETCH window: 0x000000be000000-0x000000bfffffff pci 0000:00:04.0: PCI bridge, secondary bus 0000:04 pci 0000:00:04.0: IO window: 0xe000-0xefff pci 0000:00:04.0: MEM window: 0xdd000000-0xdfefffff pci 0000:00:04.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff pci 0000:00:10.0: PCI bridge, secondary bus 0000:05 pci 0000:00:10.0: IO window: disabled pci 0000:00:10.0: MEM window: 0xdff00000-0xdfffffff pci 0000:00:10.0: PREFETCH window: disabled
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Setting latency timer of device 0000:00:04.0 to 64
PCI: Setting latency timer of device 0000:00:10.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 10, 4194304 bytes)
TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs... it is
Freeing initrd memory: 6194k freed
Simple Boot Flag at 0x4c set to 0x1
IA-32 Microcode Update Driver: v1.14a <[email protected]>
microcode: CPU0 not a capable Intel processor
microcode: CPU1 not a capable Intel processor
audit: initializing netlink socket (disabled)
type=2000 audit(1216686448.339:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 1994
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:00.0: Enabling HT MSI Mapping
pci 0000:00:02.0: Enabling HT MSI Mapping
pci 0000:00:03.0: Enabling HT MSI Mapping
pci 0000:00:04.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Enabling HT MSI Mapping
pci 0000:00:0e.0: Enabling HT MSI Mapping
pci 0000:00:10.0: Enabling HT MSI Mapping
pci 0000:00:10.1: Enabling HT MSI Mapping
pci 0000:04:00.0: Boot video device
PCI: Setting latency timer of device 0000:00:02.0 to 64 pcieport-driver 0000:00:02.0: found MSI capability pci_express 0000:00:02.0:pcie00: allocate port service
PCI: Setting latency timer of device 0000:00:03.0 to 64 pcieport-driver 0000:00:03.0: found MSI capability pci_express 0000:00:03.0:pcie00: allocate port service
PCI: Setting latency timer of device 0000:00:04.0 to 64 pcieport-driver 0000:00:04.0: found MSI capability pci_express 0000:00:04.0:pcie00: allocate port service
ALI M7101 PMU not found.
uvesafb: failed to execute /sbin/v86d
uvesafb: make sure that the v86d helper is installed and executable
uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
uvesafb: vbe_init() failed with -22
uvesafb: probe of uvesafb.0 failed with error -22
vga16fb: initializing
vga16fb: mapped to 0xffff8800000a0000
Console: switching to colour frame buffer device 80x30
fb0: VGA16 VGA frame buffer device
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: ACPI0007:01 is registered as cooling_device1
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (60 C)hpet_resources: 0xfed00000 is busy
Linux agpgart interface v0.103
Serial: 8250/16550 driver4 ports, IRQ sharing disabled
brd: module loaded
asus-laptop: Asus Laptop Support version 0.42
asus-laptop: F3T model detected
ACPI: EC: non-query interrupt received, switching to interrupt mode Registered led device: asus::mail
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all micertc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k
cpuidle: using governor ladder
cpuidle: using governor menu
TCP bic registered
NET: Registered protocol family 17 powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-52 processors (2 cpu cores) (version 2.20.00) powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x13 powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x1e
rtc_cmos 00:02: setting system clock to 2008-07-22 00:27:29 UTC (1216686449)
Freeing unused kernel memory: 728k freed
input: AT Translated Set 2 keyboard as /class/input/input0
powernow-k8: ph2 null fid transition 0x8
No dock devices found.
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
IOAPIC[0]: Set routing entry (2-21 -> 0x61 -> IRQ 21 Mode:1 Active:1)
forcedeth 0000:00:14.0: PCI INT A -> Link[LMAC] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:14.0 to 64
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
libata version 3.00 loaded.ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ricoh-mmc: Ricoh MMC Controller disabling driver
ricoh-mmc: Copyright(c) Philip Langdale
forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 66:77:44:22:33:11
forcedeth 0000:00:14.0: highdma pwrctl timirq gbit lnktim desc-v3sata_nv 0000:00:0e.0: version 3.5
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
IOAPIC[0]: Set routing entry (2-23 -> 0x69 -> IRQ 23 Mode:1 Active:1)sata_nv 0000:00:0e.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23sata_nv 0000:00:0e.0: Using SWNCQ mode
PCI: Setting latency timer of device 0000:00:0e.0 to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc000 irq 23
ata2: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xc008 irq 23
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: HTS541010G9SA00, MBZOC60R, max UDMA/100
ata1.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/100
Clocksource tsc unstable (delta = -170038645 ns)
ata2: SATA link down (SStatus 0 SControl 300)
isa bounce pool size: 16 pages
scsi 0:0:0:0: Direct-Access ATA HTS541010G9SA00 MBZO PQ: 0 ANSI: 5
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 20
IOAPIC[0]: Set routing entry (2-20 -> 0x71 -> IRQ 20 Mode:1 Active:1)ehci_hcd 0000:00:0b.1: PCI INT B -> Link[LUB2] -> GSI 20 (level, low) -> IRQ 20
udev: renamed network interface eth0 to eth1
PCI: Setting latency timer of device 0000:00:0b.1 to 64ehci_hcd 0000:00:0b.1: EHCI Host Controllerehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1ehci_hcd 0000:00:0b.1: debug port 1ehci_hcd 0000:00:0b.1: cache line size of 64 is not supportedehci_hcd 0000:00:0b.1: irq 20, io mem 0xdc6bfc00ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.26-git8 ehci_hcd
usb usb1: SerialNumber: 0000:00:0b.1
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 10
IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:1 Active:1)ohci_hcd 0000:00:0b.0: PCI INT A -> Link[LUB0] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:0b.0 to 64ohci_hcd 0000:00:0b.0: OHCI Host Controllerohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2ohci_hcd 0000:00:0b.0: irq 10, io mem 0xdc6be000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.26-git8 ohci_hcd
usb usb2: SerialNumber: 0000:00:0b.0
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 16
IOAPIC[0]: Set routing entry (2-16 -> 0x79 -> IRQ 16 Mode:1 Active:1)firewire_ohci 0000:05:01.0: PCI INT A -> Link[LNKA] -> GSI 16 (level, low) -> IRQ 16pata_amd 0000:00:0d.0: version 0.3.10
PCI: Setting latency timer of device 0000:00:0d.0 to 64
scsi2 : pata_amd
scsi3 : pata_amd
ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15firewire_ohci: Added fw-ohci device 0000:05:01.0, OHCI version 1.0
ricoh-mmc: Ricoh MMC controller found at 0000:05:01.2 [1180:0843] (rev 1)
ricoh-mmc: Controller is now disabled.
usb 1-7: new high speed USB device using ehci_hcd and address 3
usb 1-7: configuration #1 chosen from 1 choice
usb 1-7: New USB device found, idVendor=05e1, idProduct=0501
usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-7: Product: USB 2.0 Image Capture Controller
usb 1-7: Manufacturer: Syntek Semiconductor
ata4.00: ATAPI: HL-DT-ST DVDRAM GMA-4082N, HJ02, max UDMA/33
ata4: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc000) ACPI=0x701f (60:900:0x11)
ata4.00: configured for UDMA/33
scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GMA-4082N HJ02 PQ: 0 ANSI: 5
sdhci-pci 0000:05:01.1: SDHCI controller found [1180:0822] (rev 19)
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 17
IOAPIC[0]: Set routing entry (2-17 -> 0x81 -> IRQ 17 Mode:1 Active:1)
sdhci-pci 0000:05:01.1: PCI INT B -> Link[LNKB] -> GSI 17 (level, low) -> IRQ 17
Registered led device: mmc0
mmc0: SDHCI controller on PCI [0000:05:01.1] using PIOfirewire_core: created device fw0: GUID 00e0180003715a18, S400
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:<4>Driver 'sr' needs updating - please use bus_type methods
usb 2-3: new low speed USB device using ohci_hcd and address 2
usb 2-3: configuration #1 chosen from 1 choice
sda1 sda2 sda3 <<6>usb 2-3: New USB device found, idVendor=046d, idProduct=c019
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3: Product: Logitech USB Optical Mouse
sda5 sda6<6>usb 2-3: Manufacturer: Logitech
sda7 > sda4
usbcore: registered new interface driver hiddev
sd 0:0:0:0: [sda] Attached SCSI disk
input: Logitech Logitech USB Optical Mouse as /class/input/input1
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
input,hidraw0: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:0b.0-3
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 3:0:0:0: Attached scsi generic sg1 type 5
PM: Starting manual resume from disk
ReiserFS: sda2: found reiserfs format "3.6" with standard journal
ReiserFS: sda2: using ordered data mode
ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda2: checking transaction log (sda2)
ReiserFS: sda2: Using r5 hash to sort names
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /class/input/input3
ACPI: Sleep Button (CM) [SLPB]
input: Lid Switch as /class/input/input4
ACPI: AC Adapter [AC0] (on-line)
ACPI: Lid Switch [LID]
input: Power Button (CM) as /class/input/input5
ACPI: device:09 is registered as cooling_device2
input: Video Bus as /class/input/input6
ACPI: Power Button (CM) [PWRB]
ACPI: WMI: Mapper loaded
ACPI: I/O resource nForce2_smbus [0x600-0x63f] conflicts with ACPI region SMRG [0x600-0x60f]
ACPI: Device needs an ACPI driver
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x600
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x700
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
ACPI: Battery Slot [BAT0] (battery present)
input: PC Speaker as /class/input/input7
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
IOAPIC[0]: Set routing entry (2-22 -> 0x89 -> IRQ 22 Mode:1 Active:1)
HDA Intel 0000:00:10.1: PCI INT B -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:10.1 to 64
input: PS/2 Mouse as /class/input/input8
input: AlpsPS/2 ALPS GlidePoint as /class/input/input9
Adding 1574328k swap on /dev/sda1. Priority:-1 extents:1 across:1574328k
loop: module loaded
fuse init (API version 7.9)
ReiserFS: sda4: found reiserfs format "3.6" with standard journal
ReiserFS: sda4: using ordered data mode
ReiserFS: sda4: journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda4: checking transaction log (sda4)
ReiserFS: sda4: Using r5 hash to sort names
ReiserFS: sda5: found reiserfs format "3.6" with standard journal
ReiserFS: sda5: using ordered data mode
ReiserFS: sda5: journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda5: checking transaction log (sda5)
ReiserFS: sda5: Using r5 hash to sort names
ReiserFS: sda6: found reiserfs format "3.6" with standard journal
ReiserFS: sda6: using ordered data mode
ReiserFS: sda6: journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda6: checking transaction log (sda6)
ReiserFS: sda6: Using r5 hash to sort names
ReiserFS: sda7: found reiserfs format "3.6" with standard journal
ReiserFS: sda7: using ordered data mode
ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda7: checking transaction log (sda7)
ReiserFS: sda7: Using r5 hash to sort names
IPv4 FIB: Using LC-trie version 0.408
eth1: no link during initialization.
eth1: no link during initialization.
eth1: no link during initialization.
eth1: no link during initialization.
NET: Registered protocol family 10
lo: Disabled Privacy ExtensionsADDRCONF(NETDEV_UP): eth1: link is not ready
warning: `ntpd' uses 32-bit capabilities (legacy support in use)
Bluetooth: Core ver 2.12
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.10
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.10