Skip to contentSkip to conversation

lm75: cleanup and

PATCH RESEND Superseded David Brownell 1 participant 1 message Jul 25, 2008 Hardware monitoring

lore
Share & tools
lore
#0 lore raw

PATCH RESEND 1/2 lm75: cleanup and

From: David Brownell <[email protected]>

Minor cleanup and reorg of the lm75 code.

- Kconfig provides a larger list of lm75-compatible chips

- A top comment now says what the driver does (!) ... as in, just what sort of sensor is this??

- Section comments now delineate the various sections of the driver:
hwmon attributes, driver binding, register access, module glue. One driver binding function moved out of the attribute section, as did the driver struct itself.

- Minor tweaks to legacy probe logic: correct a comment, and remove a pointless variable.

- Whitespace, linelength, and comment fixes.

This patch should include no functional changes.

---
 drivers/hwmon/Kconfig |   18 ++++++----
 drivers/hwmon/lm75.c  |   90 ++++++++++++++++++++++++++++----------------------
 2 files changed, 63 insertions(+), 45 deletions(-)
drivers/hwmon/Kconfig +12 -6
@@ -394,13 +394,19 @@ config SENSORS_LM75
 	tristate "National Semiconductor LM75 and compatibles"
 	depends on I2C
 	help
-	  If you say yes here you get support for National Semiconductor LM75
-	  sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in
-	  9-bit precision mode), and TelCom (now Microchip) TCN75.
+	  If you say yes here you get support for one common type of
+	  temperature sensor chip, with models including:
 
-	  The DS75 and DS1775 in 10- to 12-bit precision modes will require
-	  a force module parameter. The driver will not handle the extra
-	  precision anyhow.
+		- Dallas Semiconductor DS75 and DS1775
+		- Maxim MAX6625 and MAX6626
+		- Microchip MCP980x
+		- National Semiconductor LM75
+		- NXP's LM75A
+		- ST Microelectronics STDS75
+		- TelCom (now Microchip) TCN75
+		- Texas Instruments TMP100, TMP101, TMP75, TMP175, TMP275
+
+	  Most of these chips will require a "force" module parameter.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called lm75.
drivers/hwmon/lm75.c +51 -39

189 lines not on this page · raw message

_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors