Skip to contentSkip to conversation

2.6.26-00000-g8be1a6d - WARNING: at drivers/base/power/main.c:82

DISCUSSION Roberto Oppedisano 4 participants 4 messages Jul 28, 2008 – Jul 30, 2008

lore
Share & tools
lore
#0 lore raw

More info on request.

Kind regards
R.

[29429.039959] ------------[ cut here ]------------
[29429.039959] WARNING: at drivers/base/power/main.c:82
device_pm_add+0x4d/0xb1()
[29429.039959] Modules linked in: tun radeon drm rfcomm l2cap usblp ipv6

cpufreq_ondemand cpufreq_stats cpufreq_userspace cpufreq_powersave ipt_recent xt_tcpudp nf_conntrack_ipv4 xt_state nf_conntrack iptable_filter ip_tables x_tables vfat fat fuse acpi_cpufreq freq_table usbserial microcode snd_intel8x0m pcmcia snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device snd soundcore snd_page_alloc yenta_socket rsrc_nonstatic ipw2200 pcmcia_core hci_usb i2c_i801 bluetooth video output battery ac button evdev usbhid ohci1394 8139cp uhci_hcd ehci_hcd ieee1394 usbcore sg sr_mod cdrom thermal processor fan

[29429.039959] Pid: 10544, comm: s2ram Tainted: G        W
2.6.26-00000-g8be1a6d #1
[29429.039959]  [<c011b733>] warn_on_slowpath+0x40/0x63
[29429.039959]  [<c01e93b7>] sprintf+0x1d/0x20
[29429.039959]  [<c011bfc9>] vprintk+0x1cd/0x274
[29429.039959]  [<c011ba65>] try_acquire_console_sem+0xa/0x2a
[29429.039959]  [<c019e631>] sysfs_find_dirent+0x13/0x23
[29429.039959]  [<c019e107>] sysfs_add_file_mode+0x4c/0x6a
[29429.039959]  [<c019f8cd>] internal_create_group+0xda/0x139
[29429.039959]  [<c011c084>] printk+0x14/0x18
[29429.039959]  [<c023ee00>] device_pm_add+0x4d/0xb1
[29429.039959]  [<c023aacb>] device_add+0x340/0x4ad
[29429.039959]  [<f887599e>] usb_create_ep_files+0x1ed/0x26b [usbcore]
[29429.039959]  [<c019d850>] sysfs_hash_and_remove+0x44/0x50
[29429.039959]  [<f887533f>] usb_create_sysfs_intf_files+0x5a/0x72
[usbcore]
[29429.039959]  [<f887272c>] usb_set_interface+0x137/0x140 [usbcore]
[29429.039959]  [<f8871923>] usb_disable_interface+0x1e/0x2f [usbcore]
[29429.039959]  [<f88737e6>] usb_unbind_interface+0x46/0x62 [usbcore]
[29429.039959]  [<c023bf5d>] __device_release_driver+0x58/0x76
[29429.039959]  [<c023bf93>] device_release_driver+0x18/0x21
[29429.039959]  [<f887323f>] usb_driver_release_interface+0x3c/0x76
[usbcore]
[29429.039959]  [<f88b37b6>] hci_usb_disconnect+0x35/0x62 [hci_usb]
[29429.039959]  [<f88737d6>] usb_unbind_interface+0x36/0x62 [usbcore]
[29429.039959]  [<c023bf5d>] __device_release_driver+0x58/0x76
[29429.039959]  [<c023bf93>] device_release_driver+0x18/0x21
[29429.039959]  [<f887323f>] usb_driver_release_interface+0x3c/0x76
[usbcore]
[29429.039959]  [<f8873292>] usb_rebind_intf+0x19/0x4e [usbcore]
[29429.039959]  [<f887332d>] do_unbind_rebind+0x4d/0x5a [usbcore]
[29429.039959]  [<f887342a>] usb_external_resume_device+0xf0/0xf6
[usbcore]
[29429.039959]  [<c023ea2c>] device_resume+0x85/0x2f4
[29429.039959]  [<c01391c9>] suspend_devices_and_enter+0xd5/0x10d
[29429.039959]  [<c0139312>] enter_state+0xcf/0x11c
[29429.039959]  [<c01393ec>] state_store+0x8d/0xa1
[29429.039959]  [<c013935f>] state_store+0x0/0xa1
[29429.039959]  [<c01e58af>] kobj_attr_store+0x18/0x1c
[29429.039959]  [<c019de6f>] sysfs_write_file+0xa4/0xd8
[29429.039959]  [<c019ddcb>] sysfs_write_file+0x0/0xd8
[29429.039959]  [<c016816a>] vfs_write+0x83/0xf6
[29429.039959]  [<c0168597>] sys_write+0x3c/0x63
[29429.039959]  [<c01038da>] syscall_call+0x7/0xb
[29429.039959]  =======================
[29429.039959] ---[ end trace fa351609edb352dc ]---
#1 lore raw
Quoted 2 lines · On Mon, 28 Jul 2008 13:33:21 +0200 Roberto Oppedisano…

More info on request.

Let's cc linux-usb, as that appears to be the subsystem which triggered this:

int device_pm_add(struct device *dev)

{
	int error;

	pr_debug("PM: Adding info for %s:%s\n",
		 dev->bus ? dev->bus->name : "No Bus",
		 kobject_name(&dev->kobj));
	mutex_lock(&dpm_list_mtx);
	if (dev->parent) {
		if (dev->parent->power.status >= DPM_SUSPENDING) {
			dev_warn(dev, "parent %s is sleeping, will not add\n",
				dev->parent->bus_id);
			WARN_ON(true);
		}

WARN_ON.

Also, I assume that your kernel did print that "parent %s is sleeping" message, but you trimmed it off. That would probably be useful information.

Thanks.

Quoted 61 lines
[29429.039959] ------------[ cut here ]------------
[29429.039959] WARNING: at drivers/base/power/main.c:82
device_pm_add+0x4d/0xb1()
[29429.039959] Modules linked in: tun radeon drm rfcomm l2cap usblp ipv6

cpufreq_ondemand cpufreq_stats cpufreq_userspace cpufreq_powersave ipt_recent xt_tcpudp nf_conntrack_ipv4 xt_state nf_conntrack iptable_filter ip_tables x_tables vfat fat fuse acpi_cpufreq freq_table usbserial microcode snd_intel8x0m pcmcia snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device snd soundcore snd_page_alloc yenta_socket rsrc_nonstatic ipw2200 pcmcia_core hci_usb i2c_i801 bluetooth video output battery ac button evdev usbhid ohci1394 8139cp uhci_hcd ehci_hcd ieee1394 usbcore sg sr_mod cdrom thermal processor fan

[29429.039959] Pid: 10544, comm: s2ram Tainted: G        W
2.6.26-00000-g8be1a6d #1
[29429.039959]  [<c011b733>] warn_on_slowpath+0x40/0x63
[29429.039959]  [<c01e93b7>] sprintf+0x1d/0x20
[29429.039959]  [<c011bfc9>] vprintk+0x1cd/0x274
[29429.039959]  [<c011ba65>] try_acquire_console_sem+0xa/0x2a
[29429.039959]  [<c019e631>] sysfs_find_dirent+0x13/0x23
[29429.039959]  [<c019e107>] sysfs_add_file_mode+0x4c/0x6a
[29429.039959]  [<c019f8cd>] internal_create_group+0xda/0x139
[29429.039959]  [<c011c084>] printk+0x14/0x18
[29429.039959]  [<c023ee00>] device_pm_add+0x4d/0xb1
[29429.039959]  [<c023aacb>] device_add+0x340/0x4ad
[29429.039959]  [<f887599e>] usb_create_ep_files+0x1ed/0x26b [usbcore]
[29429.039959]  [<c019d850>] sysfs_hash_and_remove+0x44/0x50
[29429.039959]  [<f887533f>] usb_create_sysfs_intf_files+0x5a/0x72
[usbcore]
[29429.039959]  [<f887272c>] usb_set_interface+0x137/0x140 [usbcore]
[29429.039959]  [<f8871923>] usb_disable_interface+0x1e/0x2f [usbcore]
[29429.039959]  [<f88737e6>] usb_unbind_interface+0x46/0x62 [usbcore]
[29429.039959]  [<c023bf5d>] __device_release_driver+0x58/0x76
[29429.039959]  [<c023bf93>] device_release_driver+0x18/0x21
[29429.039959]  [<f887323f>] usb_driver_release_interface+0x3c/0x76
[usbcore]
[29429.039959]  [<f88b37b6>] hci_usb_disconnect+0x35/0x62 [hci_usb]
[29429.039959]  [<f88737d6>] usb_unbind_interface+0x36/0x62 [usbcore]
[29429.039959]  [<c023bf5d>] __device_release_driver+0x58/0x76
[29429.039959]  [<c023bf93>] device_release_driver+0x18/0x21
[29429.039959]  [<f887323f>] usb_driver_release_interface+0x3c/0x76
[usbcore]
[29429.039959]  [<f8873292>] usb_rebind_intf+0x19/0x4e [usbcore]
[29429.039959]  [<f887332d>] do_unbind_rebind+0x4d/0x5a [usbcore]
[29429.039959]  [<f887342a>] usb_external_resume_device+0xf0/0xf6
[usbcore]
[29429.039959]  [<c023ea2c>] device_resume+0x85/0x2f4
[29429.039959]  [<c01391c9>] suspend_devices_and_enter+0xd5/0x10d
[29429.039959]  [<c0139312>] enter_state+0xcf/0x11c
[29429.039959]  [<c01393ec>] state_store+0x8d/0xa1
[29429.039959]  [<c013935f>] state_store+0x0/0xa1
[29429.039959]  [<c01e58af>] kobj_attr_store+0x18/0x1c
[29429.039959]  [<c019de6f>] sysfs_write_file+0xa4/0xd8
[29429.039959]  [<c019ddcb>] sysfs_write_file+0x0/0xd8
[29429.039959]  [<c016816a>] vfs_write+0x83/0xf6
[29429.039959]  [<c0168597>] sys_write+0x3c/0x63
[29429.039959]  [<c01038da>] syscall_call+0x7/0xb
[29429.039959]  =======================
[29429.039959] ---[ end trace fa351609edb352dc ]---
#2 lore raw
Quoted 20 lines · On Wed, 30 Jul 2008 01:16:16 -0700 Andrew Morton wrote:

On Mon, 28 Jul 2008 13:33:21 +0200 Roberto Oppedisano <[email protected]> wrote:

Let's cc linux-usb, as that appears to be the subsystem which triggered this:

int device_pm_add(struct device *dev)

{
	int error;

	pr_debug("PM: Adding info for %s:%s\n",
		 dev->bus ? dev->bus->name : "No Bus",
		 kobject_name(&dev->kobj));
	mutex_lock(&dpm_list_mtx);
	if (dev->parent) {
		if (dev->parent->power.status >= DPM_SUSPENDING) {
			dev_warn(dev, "parent %s is sleeping, will not add\n",
				dev->parent->bus_id);
			WARN_ON(true);
		}
Quoted 6 lines

WARN_ON.

Also, I assume that your kernel did print that "parent %s is sleeping" message, but you trimmed it off. That would probably be useful information.

yep, here it is;

Jul 28 13:18:59 poppero1 kernel: [29429.039959] usb_endpoint

usbdev4.2_ep03: parent 4-2:1.1 is sleeping, will not add

BTW, looking at the syslog I realize that 5 traces were connected to the same event, so I'm going to attach them all, in case they're useful.

Thanks,
R.

Quoted 66 lines

Thanks.

Quoted 61 lines
[29429.039959] ------------[ cut here ]------------
[29429.039959] WARNING: at drivers/base/power/main.c:82
device_pm_add+0x4d/0xb1()
[29429.039959] Modules linked in: tun radeon drm rfcomm l2cap usblp ipv6

cpufreq_ondemand cpufreq_stats cpufreq_userspace cpufreq_powersave ipt_recent xt_tcpudp nf_conntrack_ipv4 xt_state nf_conntrack iptable_filter ip_tables x_tables vfat fat fuse acpi_cpufreq freq_table usbserial microcode snd_intel8x0m pcmcia snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device snd soundcore snd_page_alloc yenta_socket rsrc_nonstatic ipw2200 pcmcia_core hci_usb i2c_i801 bluetooth video output battery ac button evdev usbhid ohci1394 8139cp uhci_hcd ehci_hcd ieee1394 usbcore sg sr_mod cdrom thermal processor fan

[29429.039959] Pid: 10544, comm: s2ram Tainted: G        W
2.6.26-00000-g8be1a6d #1
[29429.039959]  [<c011b733>] warn_on_slowpath+0x40/0x63
[29429.039959]  [<c01e93b7>] sprintf+0x1d/0x20
[29429.039959]  [<c011bfc9>] vprintk+0x1cd/0x274
[29429.039959]  [<c011ba65>] try_acquire_console_sem+0xa/0x2a
[29429.039959]  [<c019e631>] sysfs_find_dirent+0x13/0x23
[29429.039959]  [<c019e107>] sysfs_add_file_mode+0x4c/0x6a
[29429.039959]  [<c019f8cd>] internal_create_group+0xda/0x139
[29429.039959]  [<c011c084>] printk+0x14/0x18
[29429.039959]  [<c023ee00>] device_pm_add+0x4d/0xb1
[29429.039959]  [<c023aacb>] device_add+0x340/0x4ad
[29429.039959]  [<f887599e>] usb_create_ep_files+0x1ed/0x26b [usbcore]
[29429.039959]  [<c019d850>] sysfs_hash_and_remove+0x44/0x50
[29429.039959]  [<f887533f>] usb_create_sysfs_intf_files+0x5a/0x72
[usbcore]
[29429.039959]  [<f887272c>] usb_set_interface+0x137/0x140 [usbcore]
[29429.039959]  [<f8871923>] usb_disable_interface+0x1e/0x2f [usbcore]
[29429.039959]  [<f88737e6>] usb_unbind_interface+0x46/0x62 [usbcore]
[29429.039959]  [<c023bf5d>] __device_release_driver+0x58/0x76
[29429.039959]  [<c023bf93>] device_release_driver+0x18/0x21
[29429.039959]  [<f887323f>] usb_driver_release_interface+0x3c/0x76
[usbcore]
[29429.039959]  [<f88b37b6>] hci_usb_disconnect+0x35/0x62 [hci_usb]
[29429.039959]  [<f88737d6>] usb_unbind_interface+0x36/0x62 [usbcore]
[29429.039959]  [<c023bf5d>] __device_release_driver+0x58/0x76
[29429.039959]  [<c023bf93>] device_release_driver+0x18/0x21
[29429.039959]  [<f887323f>] usb_driver_release_interface+0x3c/0x76
[usbcore]
[29429.039959]  [<f8873292>] usb_rebind_intf+0x19/0x4e [usbcore]
[29429.039959]  [<f887332d>] do_unbind_rebind+0x4d/0x5a [usbcore]
[29429.039959]  [<f887342a>] usb_external_resume_device+0xf0/0xf6
[usbcore]
[29429.039959]  [<c023ea2c>] device_resume+0x85/0x2f4
[29429.039959]  [<c01391c9>] suspend_devices_and_enter+0xd5/0x10d
[29429.039959]  [<c0139312>] enter_state+0xcf/0x11c
[29429.039959]  [<c01393ec>] state_store+0x8d/0xa1
[29429.039959]  [<c013935f>] state_store+0x0/0xa1
[29429.039959]  [<c01e58af>] kobj_attr_store+0x18/0x1c
[29429.039959]  [<c019de6f>] sysfs_write_file+0xa4/0xd8
[29429.039959]  [<c019ddcb>] sysfs_write_file+0x0/0xd8
[29429.039959]  [<c016816a>] vfs_write+0x83/0xf6
[29429.039959]  [<c0168597>] sys_write+0x3c/0x63
[29429.039959]  [<c01038da>] syscall_call+0x7/0xb
[29429.039959]  =======================
[29429.039959] ---[ end trace fa351609edb352dc ]---
Signature · 3 lines
Roberto Oppedisano [RO2480-RIPE]
Infracom Network Application                   OSS and LIR Services
Tel. +39 045 8271518   Fax  +39 045 8271499   Cell. +39 348 7419534
#3 lore raw
In reply to Andrew Morton
Quoted 23 lines · Andrew Morton
Quoted 2 lines · On Mon, 28 Jul 2008 13:33:21 +0200 Roberto Oppedisano…

More info on request.

Let's cc linux-usb, as that appears to be the subsystem which triggered this:

int device_pm_add(struct device *dev)

{
	int error;

	pr_debug("PM: Adding info for %s:%s\n",
		 dev->bus ? dev->bus->name : "No Bus",
		 kobject_name(&dev->kobj));
	mutex_lock(&dpm_list_mtx);
	if (dev->parent) {
		if (dev->parent->power.status >= DPM_SUSPENDING) {
			dev_warn(dev, "parent %s is sleeping, will not add\n",
				dev->parent->bus_id);
			WARN_ON(true);
		}
Quoted 5 lines

WARN_ON.

Also, I assume that your kernel did print that "parent %s is sleeping" message, but you trimmed it off. That would probably be useful information.

Hmmm... I don't suppose anyone ever thought to indicate which kernel version produced this warning?

If you look at the offending source code in 2.6.27-rc1, you'll find a comment that explains the whole thing. From do_unbind_rebind() -- admittedly not easy to single out from the rather lengthy stack trace -- in drivers/usb/core/driver.c:

/* FIXME: The next line is needed because we are going to probe
* the interface, but as far as the PM core is concerned the
* interface is still suspended. The problem wouldn't exist
* if we could rebind the interface during the interface's own
* resume() call, but at the time the usb_device isn't locked! *
* The real solution will be to carry this out during the device's
* complete() callback. Until that is implemented, we have to
* use this hack.
*/
// intf->dev.power.sleeping = 0;

The last line had to be commented out because the power.sleeping field was removed during the transition from 2.6.26 to 2.6.27-rc1. The code that will make this work properly, with no warnings, hasn't been written yet; I was waiting for 2.6.27-rc1 to appear so there'd be a more-or-less stable base to work from.

For the time being you can simply ignore the WARNING; it is harmless.

Alan Stern