rtc: DS1374 wakeup support
RFC PATCH v2 1/1 rtc: DS1374 wakeup support
Wakeup support implementation.
Signed-off-by Marc Pignat <[email protected]>
---
Hi all!
If your system can wakup using this device, add the I2C_CLIENT_WAKE in your i2c board info flags, and that's it.
This patch depends on the I2C_CLIENT_WAKE functionnality which is fixed in the patch '[RFC,PATCH] i2c: fix device_init_wakeup place' (http://lkml.org/lkml/2008/7/29/194).
Changes since v1:
* patch against 2.6.27-rc1
* removed device_init_wakeup(...) calls, they should be handled in i2c-core.c
Best regards
Marc
drivers/rtc/rtc-ds1374.c +21 -0
@@ -429,12 +429,33 @@ static int __devexit ds1374_remove(struct i2c_client *client)return 0 ; } +#ifdef CONFIG_PM +static int ds1374_suspend (struct i2c_client *client,pm_message_t state) +{ +if (client->irq >=0 &&device_may_wakeup (&client->dev)) +enable_irq_wake (client->irq); +return 0 ; +} + +static int ds1374_resume (struct i2c_client *client) +{ +if (client->irq >=0 &&device_may_wakeup (&client->dev)) +disable_irq_wake (client->irq); +return 0 ; +} +#else +#define ds1374_suspend NULL +#define ds1374_resume NULL +#endif +static struct i2c_driver ds1374_driver = { .driver = { .name ="rtc-ds1374" , .owner =THIS_MODULE , }, .probe = ds1374_probe, + .suspend = ds1374_suspend, + .resume = ds1374_resume, .remove =__devexit_p (ds1374_remove), .id_table = ds1374_id, };