Skip to contentSkip to conversation

i2c-i801: SMBus patch for Intel Ibex Peak DeviceIDs

PATCH In review Seth Heasley 2 participants 2 messages Aug 8, 2008 – Aug 9, 2008

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 i2c-i801: SMBus patch for Intel Ibex Peak DeviceIDs

This patch adds the Intel Ibex Peak (PCH) SMBus Controller DeviceIDs.

Signed-off by: Seth Heasley <[email protected]>

drivers/i2c/busses/i2c-i801.c 2008-08-08 11:32:18.000000000 -0700 renamed from drivers/i2c/busses/i2c-i801.c.orig 2008-08-08 11:28:08.000000000 -0700 +3 -0
@@ -43,6 +43,7 @@
   Tolapai               0x5032     32     hard     yes     yes     yes
   ICH10                 0x3a30     32     hard     yes     yes     yes
   ICH10                 0x3a60     32     hard     yes     yes     yes
+  PCH                   0x3b30     32     hard     yes     yes     yes
 
   Features supported by this driver:
   Software PEC                     no
@@ -592,6 +593,7 @@
        { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TOLAPAI_1) },
        { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_4) },
        { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_5) },
+       { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PCH_2) },
        { 0, }
 };
 
@@ -615,6 +617,7 @@
        case PCI_DEVICE_ID_INTEL_TOLAPAI_1:
        case PCI_DEVICE_ID_INTEL_ICH10_4:
        case PCI_DEVICE_ID_INTEL_ICH10_5:
+       case PCI_DEVICE_ID_INTEL_PCH_2:
                i801_features |= FEATURE_I2C_BLOCK_READ;
                /* fall through */
        case PCI_DEVICE_ID_INTEL_82801DB_3:
drivers/i2c/busses/Kconfig 2008-08-08 11:30:42.000000000 -0700 renamed from drivers/i2c/busses/Kconfig.orig 2008-08-08 11:27:52.000000000 -0700 +1 -0
@@ -182,6 +182,7 @@
            ICH9
            Tolapai
            ICH10
+           PCH
 
          This driver can also be built as a module.  If so, the module
          will be called i2c-i801.
#1 lore raw

Hi Seth,

Quoted 15 lines · Seth Heasley

This patch adds the Intel Ibex Peak (PCH) SMBus Controller DeviceIDs.

Signed-off by: Seth Heasley <[email protected]>

drivers/i2c/busses/i2c-i801.c 2008-08-08 11:32:18.000000000 -0700 renamed from drivers/i2c/busses/i2c-i801.c.orig 2008-08-08 11:28:08.000000000 -0700 +1 -0
@@ -43,6 +43,7 @@
   Tolapai               0x5032     32     hard     yes     yes     yes
   ICH10                 0x3a30     32     hard     yes     yes     yes
   ICH10                 0x3a60     32     hard     yes     yes     yes
+  PCH                   0x3b30     32     hard     yes     yes     yes
 
   Features supported by this driver:
   Software PEC                     no

drivers/i2c/busses/i2c-i801.c 2008-08-08 11:32:18.000000000 -0700 line 598

Quoted 7 lines
drivers/i2c/busses/i2c-i801.c 2008-08-08 11:32:18.000000000 -0700 renamed from drivers/i2c/busses/i2c-i801.c.orig 2008-08-08 11:28:08.000000000 -0700 +1 -0
@@ -592,6 +593,7 @@
        { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TOLAPAI_1) },
        { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_4) },
        { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_5) },
+       { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PCH_2) },
        { 0, }
 };
(...)

Your e-mail client converted all tabs to spaces, so your patch doesn't apply. Please resend in a way which leaves the patch unmodified, so that I can apply it.

Thanks,

Signature · 1 line
Jean Delvare