Leadtek WinFast Dongle H device support?

Hello everybody,

I've just gotten the device mentioned in the subject
(http://www.leadtek.com/eng/tv_tuner/overview.asp?lineid=6&pronameid=403) and discovered that it's not yet supported under Linux. I tried adding its ID to both dib0700 and af9015 drivers, but the hardware doesn't work with those. I don't want to open the device to check what chipset it is built on (I might just return it if there's no way it can work under Linux) - perhaps someone played with it already and it's known what's inside? If yes, is there any Linux driver for the dongle? If no, what can I do to help? Here's the output of lsusb for the device:

Bus 001 Device 003: ID 0413:60f6 Leadtek Research, Inc. Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00

  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x0413 Leadtek Research, Inc.
  idProduct          0x60f6 
  bcdDevice            0.01
  iManufacturer           1 Leadtek
  iProduct                2 DTV Dongle H
  iSerial                 3 1
  bNumConfigurations      1

Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 46
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00

  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 

bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)

thanks in advance,

marek

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

I'm sorry for replying to myself, but I've just taken a look at the Windows driver CD for the hardware. The inf files there suggest it's based on DIB7700C1+XC3028L:

[WINFAST]
%MOD7000.DeviceDesc% = MOD7000.Device,USB\VID_0413&PID_60F6 ;
LR602C(DIB7700C1+XC3028L)

Hope it helps,

marek

[snip]

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb