AGP aperture beyond 4GB not valid?
I have an MSI K9A Platinum motherboard (AMD CrossFire 580X and SB600 chipset) with 4G RAM, and I'm running Fedora 9 (x86_64) with kernel 2.6.25.11-97.fc9.x86_64. When I boot, I see the following go by:
Checking aperture...
Node 0: aperture @ 1006000000 size 32 MB
Aperture beyond 4GB. Ignoring.
No AGP bridge found
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ c000000
PM: Registered nosave memory: 000000000c000000 - 0000000010000000
My BIOS doesn't have an IOMMU option (latest BIOS available for the mboard). However, it appears that an aperture is allocated but the kernel then ignores it due to where it is placed. Why?
Is there anything I can or should do about this (what impact does this really have)?
Signature · 3 lines
Chris Adams <[email protected]> Systems and Network Administrator - HiWAAY Internet Services I don't speak for anybody but myself - that's enough trouble.
Quoted 4 lines · Chris Adams
My BIOS doesn't have an IOMMU option (latest BIOS available for the mboard). However, it appears that an aperture is allocated but the kernel then ignores it due to where it is placed. Why?
32MB is normally not a useful aperture. Likely it's some garbage value the BIOS is leaving in the registers.
Quoted 2 lines
Is there anything I can or should do about this (what impact does this really have)?
It will eat your babies. No really except for some lost RAM nothing.
-Andi
Quoted 12 lines · Chris Adams
Checking aperture...
Node 0: aperture @ 1006000000 size 32 MB
Aperture beyond 4GB. Ignoring.
No AGP bridge found
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ c000000
PM: Registered nosave memory:000000000c000000- 0000000010000000
Quoted 4 lines
My BIOS doesn't have an IOMMU option (latest BIOS available for the mboard). However, it appears that an aperture is allocated but the kernel then ignores it due to where it is placed. Why?
You can't use it as an IOMMU to handle 32-bit devices, since it's above the 32-bit addressible region. Hence the kernel doesn't use it.
-hpa