/proc/mtrr I/O error
With 2.6.27-rc4 and possibly earlier kernels, I see the following:
$ cat /proc/mtrr cat: /proc/mtrr: Input/output error
Processor is an AMD K6-III/450.
Signature · 4 lines
------------------------------------------------------------------------ Bob Tracy | "I was a beta tester for dirt. They never did [email protected] | get all the bugs out." - Steve McGrew on /. ------------------------------------------------------------------------
Quoted 7 lines · On Fri, 29 Aug 2008 16:38:24 -0500 Bob Tracy <[email protected]> wrote:
With 2.6.27-rc4 and possibly earlier kernels, I see the following:
$ cat /proc/mtrr cat: /proc/mtrr: Input/output errorProcessor is an AMD K6-III/450.
static int mtrr_open(struct inode *inode, struct file *file)
{
if (!mtrr_if)
return -EIO;Beats me. Perhaps something broke in mtrr_bp_init().
It would be useful to know if 2.6.26 worked OK.
Thanks.
Quoted 18 lines · Andrew Morton
Quoted 7 lines · On Fri, 29 Aug 2008 16:38:24 -0500 Bob Tracy <[email protected]> wrote:
With 2.6.27-rc4 and possibly earlier kernels, I see the following:
$ cat /proc/mtrr cat: /proc/mtrr: Input/output errorProcessor is an AMD K6-III/450.
static int
mtrr_open(struct inode *inode, struct file *file){ if (!mtrr_if) return -EIO;
Quoted 4 lines
Beats me. Perhaps something broke in
mtrr_bp_init().It would be useful to know if 2.6.26 worked OK.
two patches needed..
http://lkml.org/lkml/2008/9/1/307
[PATCH 4/6] x86: delay early cpu initialization until cpuid is done
http://lkml.org/lkml/2008/9/1/308
[PATCH 5/6] x86: move mtrr cpu cap setting early in early_init_xxxx
YH
Quoted 24 lines · Yinghai Lu
Quoted 18 lines · Andrew Morton
Quoted 7 lines · On Fri, 29 Aug 2008 16:38:24 -0500 Bob Tracy <[email protected]> wrote:
With 2.6.27-rc4 and possibly earlier kernels, I see the following:
$ cat /proc/mtrr cat: /proc/mtrr: Input/output errorProcessor is an AMD K6-III/450.
static int
mtrr_open(struct inode *inode, struct file *file){ if (!mtrr_if) return -EIO;Quoted 4 lines
Beats me. Perhaps something broke in
mtrr_bp_init().It would be useful to know if 2.6.26 worked OK.
Quoted 6 lines
two patches needed..
http://lkml.org/lkml/2008/9/1/307
[PATCH 4/6] x86: delay early cpu initialization until cpuid is done
http://lkml.org/lkml/2008/9/1/308
[PATCH 5/6] x86: move mtrr cpu cap setting early inearly_init_xxxx
Krzysztof Helt's quick-and-dirty patch posted a few days ago did the trick, but from the descriptions of the above patches, they address the problem properly. Here's what "cat /proc/mtrr" shows with Helt's patch and the "nv" driver active for my GeForce2 MX 400 card:
$ cat /proc/mtrr reg00: base=0xd0000000 (3328MB), size= 64MB: write-combining, count=1
MTRR sanitization seems to be working properly: the same command shows nothing when X isn't running.
Signature · 4 lines
------------------------------------------------------------------------ Bob Tracy | "I was a beta tester for dirt. They never did [email protected] | get all the bugs out." - Steve McGrew on /. ------------------------------------------------------------------------
Quoted 37 lines · Bob Tracy
Quoted 24 lines · Yinghai Lu
Quoted 18 lines · Andrew Morton
Quoted 7 lines · On Fri, 29 Aug 2008 16:38:24 -0500 Bob Tracy <[email protected]> wrote:
With 2.6.27-rc4 and possibly earlier kernels, I see the following:
$ cat /proc/mtrr cat: /proc/mtrr: Input/output errorProcessor is an AMD K6-III/450.
static int
mtrr_open(struct inode *inode, struct file *file){ if (!mtrr_if) return -EIO;Quoted 4 lines
Beats me. Perhaps something broke in
mtrr_bp_init().It would be useful to know if 2.6.26 worked OK.
Quoted 6 lines
two patches needed..
http://lkml.org/lkml/2008/9/1/307
[PATCH 4/6] x86: delay early cpu initialization until cpuid is done
http://lkml.org/lkml/2008/9/1/308
[PATCH 5/6] x86: move mtrr cpu cap setting early inearly_init_xxxxKrzysztof Helt's quick-and-dirty patch posted a few days ago did the trick, but from the descriptions of the above patches, they address the problem properly. Here's what "cat
/proc/mtrr" shows with Helt's patch and the "nv" driver active for my GeForce2 MX 400 card:
Quoted 5 lines
$ cat /proc/mtrr reg00: base=0xd0000000 (3328MB), size= 64MB: write-combining, count=1MTRR sanitization seems to be working properly: the same command shows nothing when X isn't running.
did you apply them both
[PATCH 4/6] x86: delay early cpu initialization until cpuid is done [PATCH 5/6] x86: move mtrr cpu cap setting early in early_init_xxxx
YH