Skip to contentSkip to conversation

2.6.27-rc5: kobject: tried to init an initialized object...

BUG Bob Tracy 3 participants 3 messages Sep 2, 2008

lore
Share & tools
lore

Bob Tracy

author
#0 lore raw

I'm getting the following when I boot 2.6.27-rc5. Completely reproducible. Kernel is stock -rc5 except for Krzysztof Helt's AMD K6 mtrr patch. ("cat /proc/mtrr" no longer generates an I/O error, but there's no output either). If more context is needed, I can forward a complete "dmesg" log.

(...)
Floppy drive(s): fd0 is 1.2M, fd1 is 1.44M
FDC 0 is a post-1991 82077
kobject (d7991e44): tried to init an initialized object, something is seriously wrong.
Pid: 1, comm: swapper Not tainted 2.6.27-rc5 #1

 [<c01f547f>] kobject_init+0x2b/0x55
 [<c01f586c>] kobject_init_and_add+0x10/0x2c
 [<c01e9483>] elv_register_queue+0x52/0x58
 [<c01efa03>] blk_register_filter+0x39/0x44
 [<c01ee8e2>] add_disk+0x3a/0x85
 [<c01ee294>] exact_match+0x0/0x7
 [<c01ee684>] exact_lock+0x0/0xd
 [<c03f6d34>] floppy_init+0x7d2/0xa59
 [<c010103a>] _stext+0x3a/0x12a
 [<c03f6562>] floppy_init+0x0/0xa59
 [<c018a44c>] create_proc_entry+0x69/0x7b
 [<c013ecfe>] register_irq_proc+0x74/0x8c
 [<c03e6669>] kernel_init+0x5e/0xa9
 [<c03e660b>] kernel_init+0x0/0xa9
 [<c0102f77>] kernel_thread_helper+0x7/0x10
 =======================

natsemi dp8381x driver, version 2.1, Sept 11, 2006
originally by Donald Becker <[email protected]> 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
PCI: setting IRQ 12 as level-triggered (...)

Signature · 4 lines
------------------------------------------------------------------------
Bob Tracy          |  "I was a beta tester for dirt.  They never did
[email protected]       |   get all the bugs out." - Steve McGrew on /.
------------------------------------------------------------------------
#1 lore raw
Quoted 26 lines · On Tue, 2 Sep 2008 00:17:05 -0500 Bob Tracy <[email protected]> wrote:

I'm getting the following when I boot 2.6.27-rc5. Completely reproducible. Kernel is stock -rc5 except for Krzysztof Helt's AMD K6 mtrr patch. ("cat /proc/mtrr" no longer generates an I/O error, but there's no output either). If more context is needed, I can forward a complete "dmesg" log.

(...)
Floppy drive(s): fd0 is 1.2M, fd1 is 1.44M
FDC 0 is a post-1991 82077
kobject (d7991e44): tried to init an initialized object, something is seriously wrong.
Pid: 1, comm: swapper Not tainted 2.6.27-rc5 #1

 [<c01f547f>] kobject_init+0x2b/0x55
 [<c01f586c>] kobject_init_and_add+0x10/0x2c
 [<c01e9483>] elv_register_queue+0x52/0x58
 [<c01efa03>] blk_register_filter+0x39/0x44
 [<c01ee8e2>] add_disk+0x3a/0x85
 [<c01ee294>] exact_match+0x0/0x7
 [<c01ee684>] exact_lock+0x0/0xd
 [<c03f6d34>] floppy_init+0x7d2/0xa59
 [<c010103a>] _stext+0x3a/0x12a
 [<c03f6562>] floppy_init+0x0/0xa59
 [<c018a44c>] create_proc_entry+0x69/0x7b
 [<c013ecfe>] register_irq_proc+0x74/0x8c
 [<c03e6669>] kernel_init+0x5e/0xa9
 [<c03e660b>] kernel_init+0x0/0xa9
 [<c0102f77>] kernel_thread_helper+0x7/0x10
 =======================
Quoted 4 lines

natsemi dp8381x driver, version 2.1, Sept 11, 2006
originally by Donald Becker <[email protected]> 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
PCI: setting IRQ 12 as level-triggered

Sorry about that. A fix was queued in Jens' tree:

http://marc.info/?l=linux-kernel&m=122000748432301&w=2

Jens, can you send the fix to Linus shortly?

#2 lore raw
Quoted 34 lines · FUJITA Tomonori
Quoted 26 lines · On Tue, 2 Sep 2008 00:17:05 -0500 Bob Tracy <[email protected]> wrote:

I'm getting the following when I boot 2.6.27-rc5. Completely reproducible. Kernel is stock -rc5 except for Krzysztof Helt's AMD K6 mtrr patch. ("cat /proc/mtrr" no longer generates an I/O error, but there's no output either). If more context is needed, I can forward a complete "dmesg" log.

(...)
Floppy drive(s): fd0 is 1.2M, fd1 is 1.44M
FDC 0 is a post-1991 82077
kobject (d7991e44): tried to init an initialized object, something is seriously wrong.
Pid: 1, comm: swapper Not tainted 2.6.27-rc5 #1

 [<c01f547f>] kobject_init+0x2b/0x55
 [<c01f586c>] kobject_init_and_add+0x10/0x2c
 [<c01e9483>] elv_register_queue+0x52/0x58
 [<c01efa03>] blk_register_filter+0x39/0x44
 [<c01ee8e2>] add_disk+0x3a/0x85
 [<c01ee294>] exact_match+0x0/0x7
 [<c01ee684>] exact_lock+0x0/0xd
 [<c03f6d34>] floppy_init+0x7d2/0xa59
 [<c010103a>] _stext+0x3a/0x12a
 [<c03f6562>] floppy_init+0x0/0xa59
 [<c018a44c>] create_proc_entry+0x69/0x7b
 [<c013ecfe>] register_irq_proc+0x74/0x8c
 [<c03e6669>] kernel_init+0x5e/0xa9
 [<c03e660b>] kernel_init+0x0/0xa9
 [<c0102f77>] kernel_thread_helper+0x7/0x10
 =======================
Quoted 4 lines

natsemi dp8381x driver, version 2.1, Sept 11, 2006
originally by Donald Becker <[email protected]> 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
PCI: setting IRQ 12 as level-triggered

Quoted 6 lines

Sorry about that. A fix was queued in Jens' tree:

http://marc.info/?l=linux-kernel&m=122000748432301&w=2

Jens, can you send the fix to Linus shortly?

I did, twice already. It's not stalled at my end :-)

Signature · 1 line
Jens Axboe