Skip to contentSkip to conversation

Multiple cards on one host

MMC Sascha Hauer 2 participants 3 messages Sep 3, 2008

lore
Share & tools
lore
#0 lore raw

Hi,

I have a board (PXA based) which has two SD slots. It uses a gpio to switch between the slots. In times when the MMC subsystem implemented the bus topology our customer used this fact to connect the two slots on a single host (although it was never intended to work with SD cards, it seemed to work). Any idea how to implement this on recent kernels? I thought about registering two hosts in pxamci.c, but this seems quite hacky and I suppose I'll run into locking trouble.

Sascha

Signature · 4 lines
 Pengutronix - Linux Solutions for Science and Industry
   Handelsregister:  Amtsgericht Hildesheim, HRA 2686
     Hannoversche Str. 2, 31134 Hildesheim, Germany
   Phone: +49-5121-206917-0 |  Fax: +49-5121-206917-9
#1 lore raw
Quoted 10 lines · On Wed, 3 Sep 2008 10:43:43 +0200 Sascha Hauer <[email protected]> wrote:

Hi,

I have a board (PXA based) which has two SD slots. It uses a gpio to switch between the slots. In times when the MMC subsystem implemented the bus topology our customer used this fact to connect the two slots on a single host (although it was never intended to work with SD cards, it seemed to work). Any idea how to implement this on recent kernels? I thought about registering two hosts in pxamci.c, but this seems quite hacky and I suppose I'll run into locking trouble.

To be honest, I don't think you can sanely support it. The OMAP guys have been playing with some kind of multiplexer in front of the controller, but it just seems like a world of hurt to me.

Perhaps you can convert to using SPI for the second slot if the customer really needs a design with two slots?

Rgds

Signature · 9 lines
     -- Pierre Ossman

  Linux kernel, MMC maintainer        http://www.kernel.org
  rdesktop, core developer          http://www.rdesktop.org

  WARNING: This correspondence is being monitored by the
  Swedish government. Make sure your server uses encryption
  for SMTP traffic and consider using PGP for end-to-end
  encryption.
#2 lore raw
Quoted 14 lines · Pierre Ossman
Quoted 10 lines · On Wed, 3 Sep 2008 10:43:43 +0200 Sascha Hauer <[email protected]> wrote:

Hi,

I have a board (PXA based) which has two SD slots. It uses a gpio to switch between the slots. In times when the MMC subsystem implemented the bus topology our customer used this fact to connect the two slots on a single host (although it was never intended to work with SD cards, it seemed to work). Any idea how to implement this on recent kernels? I thought about registering two hosts in pxamci.c, but this seems quite hacky and I suppose I'll run into locking trouble.

Quoted 3 lines

To be honest, I don't think you can sanely support it. The OMAP guys have been playing with some kind of multiplexer in front of the controller, but it just seems like a world of hurt to me.

That's what I was afraid of. Lets see what our customer says (I hope I won't find myself in this world of hurt)

Quoted 3 lines

Perhaps you can convert to using SPI for the second slot if the customer really needs a design with two slots?

Might be an option.

Thanks for your answer.

Sascha

Signature · 4 lines
 Pengutronix - Linux Solutions for Science and Industry
   Handelsregister:  Amtsgericht Hildesheim, HRA 2686
     Hannoversche Str. 2, 31134 Hildesheim, Germany
   Phone: +49-5121-206917-0 |  Fax: +49-5121-206917-9