2.6.26-stable review
Subsystems (44)
cover 2.6.26-stable review
This is the start of the stable review cycle for the 2.6.26.6 release. There are 71 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let us know. If anyone is a maintainer of the proper subsystem, and wants to add a Signed-off-by: line to the patch, please respond with it.
These patches are sent out with a number of different people on the Cc:
line. If you wish to be a reviewer, please email [email protected] to add your name to the list. If you want to be off the reviewer list, also email us.
Responses should be made by Wed Oct 8, 22:00:00 UTC. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
kernel.org/pub/linux/kernel/v2.6/stable-review/patch-2.6.26.8-rc1.gz
and the diffstat can be found below.
thanks,
the -stable release team
Makefile | 2 arch/s390/kernel/compat_ptrace.h | 1 arch/s390/kernel/ptrace.c | 28 +++++ arch/sparc64/kernel/of_device.c | 9 - arch/sparc64/kernel/pci.c | 2 arch/sparc64/kernel/pci_psycho.c | 14 +- arch/sparc64/kernel/prom.c | 104 +-------------------- arch/x86/kernel/alternative.c | 18 +-- arch/x86/kernel/apic_32.c | 30 +++++- arch/x86/kernel/apic_64.c | 3 arch/x86/kernel/cpu/bugs.c | 6 + arch/x86/kernel/e820_32.c | 2 arch/x86/kernel/e820_64.c | 2 arch/x86/kernel/genapic_64.c | 2 arch/x86/kernel/head64.c | 1 arch/x86/kernel/hpet.c | 19 ++- arch/x86/kernel/io_delay.c | 8 + arch/x86/kernel/mpparse.c | 5 + arch/x86/kernel/setup.c | 1 arch/x86/kernel/setup_32.c | 11 +- arch/x86/kernel/signal_64.c | 62 ++++++++++++ arch/x86/kernel/traps_64.c | 9 + arch/x86/kernel/vmi_32.c | 2 arch/x86/kernel/vsmp_64.c | 2 arch/x86/kvm/svm.c | 14 ++ arch/x86/mach-generic/bigsmp.c | 2 arch/x86/mm/pageattr.c | 6 - arch/x86/oprofile/nmi_int.c | 39 +++++++- crypto/async_tx/async_tx.c | 3 drivers/accessibility/braille/braille_console.c | 13 -- drivers/acpi/ec.c | 2 drivers/acpi/processor_perflib.c | 2 drivers/i2c/i2c-dev.c | 4 drivers/mmc/card/block.c | 4 drivers/net/ixgbe/ixgbe_main.c | 6 + drivers/net/niu.c | 56 +++++++++++ drivers/net/wireless/rt2x00/rt2x00.h | 4 drivers/net/wireless/rt2x00/rt2x00dev.c | 17 --- drivers/net/wireless/rt2x00/rt2x00mac.c | 4 drivers/pcmcia/ds.c | 23 ++-- drivers/rtc/rtc-dev.c | 15 +-- drivers/scsi/qla2xxx/qla_isr.c | 1 drivers/scsi/qla2xxx/qla_os.c | 2 drivers/spi/pxa2xx_spi.c | 116 ++++++++++++++++++------ drivers/usb/core/hcd.c | 3 drivers/video/console/fbcon.h | 2 fs/buffer.c | 13 +- fs/exec.c | 2 fs/ocfs2/stackglue.c | 7 - fs/proc/array.c | 59 ------------ include/asm-generic/rtc.h | 12 -- include/asm-x86/i387.h | 56 ----------- include/asm-x86/mpspec.h | 1 include/asm-x86/pgtable_64.h | 2 include/linux/clockchips.h | 2 include/linux/mmzone.h | 12 +- include/linux/rmap.h | 2 include/linux/sched.h | 4 include/linux/smb.h | 2 include/net/netlink.h | 2 kernel/cgroup.c | 5 - kernel/exit.c | 18 ++- kernel/sched.c | 59 ++++++++++++ kernel/time/clockevents.c | 3 kernel/time/ntp.c | 2 kernel/time/tick-broadcast.c | 78 ++++++++++++---- kernel/time/tick-common.c | 1 kernel/time/tick-internal.h | 2 kernel/time/tick-oneshot.c | 44 +++++++-- lib/scatterlist.c | 5 - mm/filemap_xip.c | 2 mm/memcontrol.c | 13 ++ mm/mmzone.c | 2 mm/rmap.c | 14 +- net/ipv4/udp.c | 59 ++++++------ net/ipv6/ip6_output.c | 64 ++++++------- net/ipv6/route.c | 2 net/key/af_key.c | 30 +++--- net/sctp/associola.c | 9 + net/sctp/sm_make_chunk.c | 15 +-- net/xfrm/xfrm_output.c | 12 +- sound/core/pcm.c | 4 sound/core/pcm_native.c | 13 -- sound/core/rawmidi.c | 4 sound/pci/hda/patch_sigmatel.c | 2 sound/pci/oxygen/hifier.c | 4 sound/pci/oxygen/oxygen.c | 4 sound/ppc/awacs.c | 50 +++++++--- 88 files changed, 862 insertions(+), 515 deletions(-)
PATCH 1/71 x86-32: AMD c1e force timer broadcast late
2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Chuck Ebbert <[email protected]>
This patch is not needed in 2.6.27 because it has new c1e-aware idle code.
In kernel 2.6.26 the 32-bit x86 timers are started earlier than before. This breaks AMD c1e detection trying to force timer broadcast for the local apic timer. Copy the code from the 64-bit kernel to force timer broadcast late.
Reference:
http://bugzilla.kernel.org/show_bug.cgi?id=11427
--- arch/x86/kernel/apic_32.c | 25 ++++++++++++++++++++++++- 1 file changed, 24 insertions(+), 1 deletion(-)
arch/x86/kernel/apic_32.c +24 -1
@@ -552,8 +552,31 @@ void __init setup_boot_APIC_clock(void)setup_APIC_timer (); } -void __devinit setup_secondary_APIC_clock (void ) +/* +* AMD C1E enabled CPUs have a real nasty problem: Some BIOSes set the +* C1E flag only in the secondary CPU, so when we detect the wreckage +* we already have enabled the boot CPU local apic timer. Check, if +* disable_apic_timer is set and the DUMMY flag is cleared. If yes, +* set the DUMMY flag again and force the broadcast mode in the +* clockevents layer. +*/ +static void __cpuinit check_boot_apic_timer_broadcast (void ) +{ +if (!local_apic_timer_disabled || + (lapic_clockevent.features &CLOCK_EVT_FEAT_DUMMY )) +return ; + + lapic_clockevent.features |=CLOCK_EVT_FEAT_DUMMY ; + +local_irq_enable (); +clockevents_notify (CLOCK_EVT_NOTIFY_BROADCAST_FORCE , + &boot_cpu_physical_apicid); +local_irq_disable (); +} + +void __cpuinit setup_secondary_APIC_clock (void ) { +check_boot_apic_timer_broadcast ();setup_APIC_timer (); }
PATCH 2/71 ACPI: Fix thermal shutdowns
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Milan Broz <[email protected]>
commit 9f497bcc695fb828da023d74ad3c966b1e58ad21 upstream
ACPI: Fix thermal shutdowns
Do not use unsigned int if there is test for negative number...
See drivers/acpi/processor_perflib.c
static unsigned int ignore_ppc = -1;
...
if (event == CPUFREQ_START && ignore_ppc <= 0) {
ignore_ppc = 0;...
--- drivers/acpi/processor_perflib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/acpi/processor_perflib.c +1 -1
@@ -70,7 +70,7 @@ static DEFINE_MUTEX(performance_mutex);* 0 -> cpufreq low level drivers initialized -> consider _PPC values * 1 -> ignore _PPC totally -> forced by user through boot param */ -static unsigned int ignore_ppc =-1 ; +static int ignore_ppc =-1 ;module_param (ignore_ppc, uint,0644 );MODULE_PARM_DESC (ignore_ppc,"If the frequency of your machine gets wrongly" \"limited by BIOS, this should help" );
PATCH 3/71 i2c-dev: Return correct error code on class_create() failure
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Sven Wegener <[email protected]>
In Linus' tree:
http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Ftorvalds%2Flinux-2.6.git;a=commit;h=e74783ec3cb981211689bd2cfd3248f8dc48ec01
We need to convert the error pointer from class_create(), else we'll return the successful return code from register_chrdev() on failure.
--- drivers/i2c/i2c-dev.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/i2c/i2c-dev.c +3 -1
@@ -581,8 +581,10 @@ static int __init i2c_dev_init(void) goto out; i2c_dev_class =class_create (THIS_MODULE ,"i2c-dev" ); -if (IS_ERR (i2c_dev_class)) +if (IS_ERR (i2c_dev_class)) { + res =PTR_ERR (i2c_dev_class); goto out_unreg_chrdev; + } res =i2c_add_driver (&i2cdev_driver);if (res)
PATCH 4/71 ixgbe: initialize interrupt throttle rate
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Andy Gospodarek <[email protected]>
commit 15e79f24b60c4b0bf8019423bda4e03a576b02f2 upstream
This commit dropped the setting of the default interrupt throttle rate.
commit 021230d40ae0e6508d6c717b6e0d6d81cd77ac25
Author: Ayyappan Veeraiyan <[email protected]> Date: Mon Mar 3 15:03:45 2008 -0800
ixgbe: Introduce MSI-X queue vector code
The following patch adds it back. Without this the default value of 0 causes the performance of this card to be awful. Restoring these to the default values yields much better performance.
This regression has been around since 2.6.25.
--- drivers/net/ixgbe/ixgbe_main.c | 6 ++++++ 1 file changed, 6 insertions(+)
drivers/net/ixgbe/ixgbe_main.c +6 -0
@@ -2258,6 +2258,12 @@ static int __devinit ixgbe_set_interruptint vector, v_budget;/* +* Set the default interrupt throttle rate. +*/ + adapter->rx_eitr = (1000000 /IXGBE_DEFAULT_ITR_RX_USECS ); + adapter->tx_eitr = (1000000 /IXGBE_DEFAULT_ITR_TX_USECS ); + +/* * It's easy to be greedy for MSI-X vectors, but it really * doesn't do us much good if we have a lot more vectors * than CPU's. So let's be conservative and only ask for
PATCH 5/71 drivers/mmc/card/block.c: fix refcount leak in mmc_block_open()
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Andrew Morton <[email protected]>
commit 70bb08962ea9bd50797ae9f16b2493f5f7c65053 upstream
mmc_block_open() increments md->usage although it returns with -EROFS when default mounting a MMC/SD card with write protect switch on. This reference counting bug prevents /dev/mmcblkX from being released on card removal, and situation worsen with reinsertion until the minor number range runs out.
--- drivers/mmc/card/block.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/mmc/card/block.c +3 -1
@@ -103,8 +103,10 @@ static int mmc_blk_open(struct inode *incheck_disk_change (inode->i_bdev); ret =0 ; -if ((filp->f_mode &FMODE_WRITE ) && md->read_only) +if ((filp->f_mode &FMODE_WRITE ) && md->read_only) { +mmc_blk_put (md); ret = -EROFS ; + } }return ret;
PATCH 6/71 async_tx: fix the bug in async_tx_run_dependencies
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Yuri Tikhonov <[email protected]>
commit de24125dd0a452bfd4502fc448e3534c5d2e87aa upstream
Should clear the next pointer of the TX if we are sure that the next TX (say NXT) will be submitted to the channel too. Overwise, we break the chain of descriptors, because we lose the information about the next descriptor to run. So next time, when invoke async_tx_run_dependencies() with TX, it's TX->next will be NULL, and NXT will be never submitted.
--- crypto/async_tx/async_tx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
crypto/async_tx/async_tx.c +2 -1
@@ -136,7 +136,8 @@ async_tx_run_dependencies(struct dma_asyspin_lock_bh (&next->lock); next->parent =NULL ; _next = next->next; - next->next =NULL ; +if (_next && _next->chan == chan) + next->next =NULL ;spin_unlock_bh (&next->lock); next->tx_submit (next);
PATCH 7/71 mm: mark the correct zone as full when scanning zonelists
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Mel Gorman <[email protected]>
commit 5bead2a0680687b9576d57c177988e8aa082b922 upstream
The iterator for_each_zone_zonelist() uses a struct zoneref *z cursor when scanning zonelists to keep track of where in the zonelist it is. The zoneref that is returned corresponds to the the next zone that is to be scanned, not the current one. It was intended to be treated as an opaque list.
When the page allocator is scanning a zonelist, it marks elements in the zonelist corresponding to zones that are temporarily full. As the zonelist is being updated, it uses the cursor here;
if (NUMA_BUILD)
zlc_mark_zone_full(zonelist, z);This is intended to prevent rescanning in the near future but the zoneref cursor does not correspond to the zone that has been found to be full. This is an easy misunderstanding to make so this patch corrects the problem by changing zoneref cursor to be the current zone being scanned instead of the next one.
--- include/linux/mmzone.h | 12 ++++++------ mm/mmzone.c | 2 +- 2 files changed, 7 insertions(+), 7 deletions(-)
include/linux/mmzone.h +6 -6
@@ -751,8 +751,9 @@ static inline int zonelist_node_idx(stru* * This function returns the next zone at or below a given zone index that is * within the allowed nodemask using a cursor as the starting point for the -* search. The zoneref returned is a cursor that is used as the next starting -* point for future calls to next_zones_zonelist(). +* search. The zoneref returned is a cursor that represents the current zone +* being examined. It should be advanced by one before calling +* next_zones_zonelist again. */ struct zoneref *next_zones_zonelist(struct zoneref *z, enum zone_type highest_zoneidx,
@@ -768,9 +769,8 @@ struct zoneref *next_zones_zonelist(stru* * This function returns the first zone at or below a given zone index that is * within the allowed nodemask. The zoneref returned is a cursor that can be -* used to iterate the zonelist with next_zones_zonelist. The cursor should -* not be used by the caller as it does not match the value of the zone -* returned. +* used to iterate the zonelist with next_zones_zonelist by advancing it by +* one before calling. */ static inline struct zoneref *first_zones_zonelist(struct zonelist *zonelist, enum zone_type highest_zoneidx,
@@ -795,7 +795,7 @@ static inline struct zoneref *first_zone#define for_each_zone_zonelist_nodemask (zone, z, zlist, highidx, nodemask) \ for (z = first_zones_zonelist(zlist, highidx, nodemask, &zone); \ zone; \ - z = next_zones_zonelist(z, highidx, nodemask, &zone)) \ + z = next_zones_zonelist(++z, highidx, nodemask, &zone)) \/** * for_each_zone_zonelist - helper macro to iterate over valid zones in a zonelist at or below a given zone index
mm/mmzone.c +1 -1
@@ -69,6 +69,6 @@ struct zoneref *next_zones_zonelist(stru (z->zone && !zref_in_nodemask(z, nodes))) z++; - *zone =zonelist_zone (z++); + *zone =zonelist_zone (z);return z; }
PATCH 8/71 pxa2xx_spi: dma bugfixes
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Ned Forrester <[email protected]>
commit 7e96445533ac3f4f7964646a202ff3620602fab4 upstream
Fixes two DMA bugs in the pxa2xx_spi driver. The first bug is in all versions of this driver; the second was introduced in the 2.6.20 kernel, and prevents using the driver with chips like m25p16 flash (which can issue large DMA reads).
1. Zero length transfers are permitted for use to insert timing, but pxa2xx_spi.c will fail if this is requested in DMA mode. Fixed by using programmed I/O (PIO) mode for such transfers.
2. Transfers larger than 8191 are not permitted in DMA mode. A test for length rejects all large transfers regardless of DMA or PIO mode. Worked around by rejecting only large transfers with DMA mapped buffers, and forcing all other transfers larger than 8191 to use PIO mode. A rate limited warning is issued for DMA transfers forced to PIO mode.
This patch should apply to all kernels back to and including 2.6.20; it was test patched against 2.6.20. An additional patch would be required for older kernels, but those versions are very buggy anyway.
--- drivers/spi/pxa2xx_spi.c | 57 +++++++++++++++++++++++++++++++++++------------ 1 file changed, 43 insertions(+), 14 deletions(-)
drivers/spi/pxa2xx_spi.c +43 -14
@@ -48,9 +48,10 @@ MODULE_ALIAS("platform:pxa2xx-spi");#define MAX_BUSES 3 -#define DMA_INT_MASK (DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR) -#define RESET_DMA_CHANNEL (DCSR_NODESC | DMA_INT_MASK) -#define IS_DMA_ALIGNED (x) (((u32)(x)&0x07)==0) +#define DMA_INT_MASK (DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR) +#define RESET_DMA_CHANNEL (DCSR_NODESC | DMA_INT_MASK) +#define IS_DMA_ALIGNED (x) (((x) & 0x07) == 0) +#define MAX_DMA_LEN 8191/* * for testing SSCR1 changes that require SSP restart, basically
@@ -850,14 +851,27 @@ static void pump_transfers(unsigned longudelay (previous->delay_usecs); } -/* Check transfer length */ -if (transfer->len >8191 ) - { -dev_warn (&drv_data->pdev->dev,"pump_transfers: transfer " -"length greater than 8191\n" ); - message->status = -EINVAL ; -giveback (drv_data); -return ; +/* Check for transfers that need multiple DMA segments */ +if (transfer->len >MAX_DMA_LEN && chip->enable_dma) { + +/* reject already-mapped transfers; PIO won't always work */ +if (message->is_dma_mapped + || transfer->rx_dma || transfer->tx_dma) { +dev_err (&drv_data->pdev->dev, +"pump_transfers: mapped transfer length " +"of %lu is greater than %d\n" , + transfer->len,MAX_DMA_LEN ); + message->status = -EINVAL ; +giveback (drv_data); +return ; + } + +/* warn ... we force this to PIO mode */ +if (printk_ratelimit ()) +dev_warn (&message->spi->dev,"pump_transfers: " +"DMA disabled for transfer length %ld " +"greater than %d\n" , + (long )drv_data->len,MAX_DMA_LEN ); }/* Setup the transfer state based on the type of transfer */
@@ -926,7 +940,7 @@ static void pump_transfers(unsigned long &dma_thresh))if (printk_ratelimit ())dev_warn (&message->spi->dev, -"pump_transfer: " +"pump_transfers: " "DMA burst size reduced to " "match bits_per_word\n" ); }
@@ -940,8 +954,23 @@ static void pump_transfers(unsigned long message->state =RUNNING_STATE ; -/* Try to map dma buffer and do a dma transfer if successful */ -if ((drv_data->dma_mapped =map_dma_buffers (drv_data))) { +/* Try to map dma buffer and do a dma transfer if successful, but +* only if the length is non-zero and less than MAX_DMA_LEN. +* +* Zero-length non-descriptor DMA is illegal on PXA2xx; force use +* of PIO instead. Care is needed above because the transfer may +* have have been passed with buffers that are already dma mapped. +* A zero-length transfer in PIO mode will not try to write/read +* to/from the buffers +* +* REVISIT large transfers are exactly where we most want to be +* using DMA. If this happens much, split those transfers into +* multiple DMA segments rather than forcing PIO. +*/ + drv_data->dma_mapped =0 ; +if (drv_data->len >0 && drv_data->len <=MAX_DMA_LEN ) + drv_data->dma_mapped =map_dma_buffers (drv_data); +if (drv_data->dma_mapped) {/* Ensure we have the correct interrupt handler */ drv_data->transfer_handler = dma_transfer;
PATCH 9/71 pxa2xx_spi: chipselect bugfixes
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Ned Forrester <[email protected]>
commit 8423597d676615f3dd2d9ab36f59f147086b90b8 upstream
Fixes several chipselect bugs in the pxa2xx_spi driver. These bugs are in all versions of this driver and prevent using it with chips like m25p16 flash.
1. The spi_transfer.cs_change flag is handled too early:
before spi_transfer.delay_usecs applies, thus making the delay ineffective at holding chip select.
2. spi_transfer.delay_usecs is ignored on the last transfer of a message (likewise not holding chipselect long enough).
3. If spi_transfer.cs_change is set on the last transfer, the chip select is always disabled, instead of the intended
meaning: optionally holding chip select enabled for the next message.
Those first three bugs were fixed with a relocation of delays and chip select de-assertions.
4. If a message has the cs_change flag set on the last transfer, and had the chip select stayed enabled as requested (see 3, above), it would not have been disabled if the next message is for a different chip. Fixed by dropping chip select regardless of cs_change at end of a message, if there is no next message or if the next message is for a different chip.
This patch should apply to all kernels back to and including 2.6.20; it was test patched against 2.6.20. An additional patch would be required for older kernels, but those versions are very buggy anyway.
--- drivers/spi/pxa2xx_spi.c | 59 ++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 48 insertions(+), 11 deletions(-)
drivers/spi/pxa2xx_spi.c +48 -11
@@ -146,7 +146,6 @@ struct driver_data {size_t tx_map_len;u8 n_bytes;u32 dma_width; -int cs_change;int (*write)(struct driver_data *drv_data);int (*read)(struct driver_data *drv_data);irqreturn_t (*transfer_handler)(struct driver_data *drv_data);
@@ -408,8 +407,45 @@ static void giveback(struct driver_data struct spi_transfer, transfer_list); +/* Delay if requested before any change in chip select */ +if (last_transfer->delay_usecs) +udelay (last_transfer->delay_usecs); + +/* Drop chip select UNLESS cs_change is true or we are returning +* a message with an error, or next message is for another chip +*/ if (!last_transfer->cs_change) drv_data->cs_control (PXA2XX_CS_DEASSERT ); +else { +struct spi_message *next_msg; + +/* Holding of cs was hinted, but we need to make sure +* the next message is for the same chip. Don't waste +* time with the following tests unless this was hinted. +* +* We cannot postpone this until pump_messages, because +* after calling msg->complete (below) the driver that +* sent the current message could be unloaded, which +* could invalidate the cs_control() callback... +*/ + +/* get a pointer to the next message, if any */ +spin_lock_irqsave (&drv_data->lock, flags); +if (list_empty (&drv_data->queue)) + next_msg =NULL ; +else + next_msg =list_entry (drv_data->queue.next, + struct spi_message, queue); +spin_unlock_irqrestore (&drv_data->lock, flags); + +/* see if the next and current messages point +* to the same chip +*/ +if (next_msg && next_msg->spi != msg->spi) + next_msg =NULL ; +if (!next_msg || msg->state ==ERROR_STATE ) + drv_data->cs_control (PXA2XX_CS_DEASSERT ); + } msg->state =NULL ;if (msg->complete)
@@ -492,10 +528,9 @@ static void dma_transfer_complete(struct msg->actual_length += drv_data->len - (drv_data->rx_end - drv_data->rx); -/* Release chip select if requested, transfer delays are -* handled in pump_transfers */ -if (drv_data->cs_change) - drv_data->cs_control (PXA2XX_CS_DEASSERT ); +/* Transfer delays and chip select release are +* handled in pump_transfers or giveback +*/ /* Move to next transfer */ msg->state =next_transfer (drv_data);
@@ -604,10 +639,9 @@ static void int_transfer_complete(struct drv_data->cur_msg->actual_length += drv_data->len - (drv_data->rx_end - drv_data->rx); -/* Release chip select if requested, transfer delays are -* handled in pump_transfers */ -if (drv_data->cs_change) - drv_data->cs_control (PXA2XX_CS_DEASSERT ); +/* Transfer delays and chip select release are +* handled in pump_transfers or giveback +*/ /* Move to next transfer */ drv_data->cur_msg->state =next_transfer (drv_data);
@@ -842,13 +876,17 @@ static void pump_transfers(unsigned longreturn ; } -/* Delay if requested at end of transfer*/ +/* Delay if requested at end of transfer before CS change */ if (message->state ==RUNNING_STATE ) { previous =list_entry (transfer->transfer_list.prev, struct spi_transfer, transfer_list);if (previous->delay_usecs)udelay (previous->delay_usecs); + +/* Drop chip select only if cs_change is requested */ +if (previous->cs_change) + drv_data->cs_control (PXA2XX_CS_DEASSERT ); }/* Check for transfers that need multiple DMA segments */
@@ -893,7 +931,6 @@ static void pump_transfers(unsigned long drv_data->len = transfer->len &DCMD_LENGTH ; drv_data->write = drv_data->tx ? chip->write : null_writer; drv_data->read = drv_data->rx ? chip->read : null_reader; - drv_data->cs_change = transfer->cs_change;/* Change speed and bit per word on a per transfer */ cr0 = chip->cr0;
PATCH 10/71 smb.h: do not include linux/time.h in userspace
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Kirill A. Shutemov <[email protected]>
commit c32a162fd420fe8dfb049db941b2438061047fcc upstream
linux/time.h conflicts with time.h from glibc
It breaks building smbmount from samba. It's regression introduced by commit 76308da (" smb.h: uses struct timespec but didn't include linux/time.h").
--- include/linux/smb.h | 2 ++ 1 file changed, 2 insertions(+)
include/linux/smb.h +2 -0
@@ -11,7 +11,9 @@#include <linux/types.h> #include <linux/magic.h> +#ifdef __KERNEL__#include <linux/time.h> +#endif enum smb_protocol {SMB_PROTOCOL_NONE ,
PATCH 35/71 x86: fix SMP alternatives: use mutex instead of spinlock, text_poke is sleepable
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Pekka Paalanen <[email protected]>
commit 2f1dafe50cc4e58a239fd81bd47f87f32042a1ee upstream
text_poke is sleepable.
The original fix by Mathieu Desnoyers <[email protected]>.
--- arch/x86/kernel/alternative.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
arch/x86/kernel/alternative.c +9 -9
@@ -1,6 +1,6 @@#include <linux/module.h> #include <linux/sched.h> -#include <linux/spinlock.h> +#include <linux/mutex.h> #include <linux/list.h> #include <linux/kprobes.h> #include <linux/mm.h>
@@ -279,7 +279,7 @@ struct smp_alt_module {struct list_head next; };static LIST_HEAD (smp_alt_modules); -static DEFINE_SPINLOCK (smp_alt); +static DEFINE_MUTEX (smp_alt);static int smp_mode =1 ;/* protected by smp_alt */ void alternatives_smp_module_add(struct module *mod, char *name,
@@ -312,12 +312,12 @@ void alternatives_smp_module_add(struct __func__, smp->locks, smp->locks_end, smp->text, smp->text_end, smp->name); -spin_lock (&smp_alt); +mutex_lock (&smp_alt);list_add_tail (&smp->next, &smp_alt_modules);if (boot_cpu_has (X86_FEATURE_UP ))alternatives_smp_unlock (smp->locks, smp->locks_end, smp->text, smp->text_end); -spin_unlock (&smp_alt); +mutex_unlock (&smp_alt); }void alternatives_smp_module_del (struct module *mod)
@@ -327,17 +327,17 @@ void alternatives_smp_module_del(structif (smp_alt_once || noreplace_smp)return ; -spin_lock (&smp_alt); +mutex_lock (&smp_alt);list_for_each_entry (item, &smp_alt_modules, next) {if (mod != item->mod)continue ;list_del (&item->next); -spin_unlock (&smp_alt); +mutex_unlock (&smp_alt);DPRINTK ("%s: %s\n" , __func__, item->name);kfree (item);return ; } -spin_unlock (&smp_alt); +mutex_unlock (&smp_alt); }void alternatives_smp_switch (int smp)
@@ -359,7 +359,7 @@ void alternatives_smp_switch(int smp)return ;BUG_ON (!smp && (num_online_cpus () >1 )); -spin_lock (&smp_alt); +mutex_lock (&smp_alt);/* * Avoid unnecessary switches because it forces JIT based VMs to
@@ -383,7 +383,7 @@ void alternatives_smp_switch(int smp) mod->text, mod->text_end); } smp_mode = smp; -spin_unlock (&smp_alt); +mutex_unlock (&smp_alt); }#endif
PATCH 11/71 USB: fix hcd interrupt disabling
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Geoff Levand <[email protected]>
commit 83a798207361cc26385187b2e71efa2b5d75de7f upstream
Commit de85422b94ddb23c021126815ea49414047c13dc, 'USB: fix interrupt disabling for HCDs with shared interrupt handlers' changed usb_add_hcd() to strip IRQF_DISABLED from irqflags prior to calling request_irq() with the justification that such a removal was necessary for shared interrupts to work properly. Unfortunately, the change in that commit unconditionally removes the IRQF_DISABLED flag, causing problems on platforms that don't use a shared interrupt but require IRQF_DISABLED. This change adds a check for IRQF_SHARED prior to removing the IRQF_DISABLED flag.
Fixes the PS3 system startup hang reported with recent Fedora and OpenSUSE kernels.
Note that this problem is hidden when CONFIG_LOCKDEP=y (ps3_defconfig), as local_irq_enable_in_hardirq() is defined as a null statement for that config.
--- drivers/usb/core/hcd.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/usb/core/hcd.c +2 -1
@@ -1885,7 +1885,8 @@ int usb_add_hcd(struct usb_hcd *hcd,* with IRQF_SHARED. As usb_hcd_irq() will always disable * interrupts we can remove it here. */ - irqflags &= ~IRQF_DISABLED ; +if (irqflags &IRQF_SHARED ) + irqflags &= ~IRQF_DISABLED ;snprintf (hcd->irq_descr,sizeof (hcd->irq_descr),"%s:usb%d" , hcd->driver->description, hcd->self.busnum);
PATCH 12/71 SCSI: qla2xxx: Defer enablement of RISC interrupts until ISP initialization completes.
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Andrew Vasquez <[email protected]>
commit 048feec5548c0582ee96148c61b87cccbcb5f9be upstream
Josip Rodin noted
(http://article.gmane.org/gmane.linux.ports.sparc/10152) the driver oopsing during registration of an rport to the FC-transport layer with a backtrace indicating a dereferencing of an shost->shost_data equal to NULL. David Miller identified a small window in driver logic where this could happen:
Quoted 15 lines
Look at how the driver registers the IRQ handler before the host has been registered with the SCSI layer.
That leads to a window of time where the shost hasn't been setup fully, yet ISRs can come in and trigger DPC thread events, such as loop resyncs, which expect the transport area to be setup.
But it won't be setup, because
scsi_add_host()hasn't finished yet.Note that in Josip's crash log, we don't even see the
qla_printk(KERN_INFO, ha, "\n" " QLogic Fibre Channel HBA Driver: %s\n" " QLogic %s - %s\n" " ISP%04X: %s @ %s hdma%c, host#=%ld, fw=%s\n",
Quoted 6 lines
...
message yet.
Which means that the crash occurs between
qla2x00_request_irqs()and printing that message.
Close this window by enabling RISC interrupts after the host has been registered with the SCSI midlayer.
--- drivers/scsi/qla2xxx/qla_isr.c | 1 - drivers/scsi/qla2xxx/qla_os.c | 2 ++ 2 files changed, 2 insertions(+), 1 deletion(-)
drivers/scsi/qla2xxx/qla_isr.c +0 -1
@@ -1838,7 +1838,6 @@ clear_risc_ints:WRT_REG_WORD (®->isp.hccr,HCCR_CLR_HOST_INT ); }spin_unlock_irq (&ha->hardware_lock); - ha->isp_ops->enable_intrs (ha); fail:return ret;
drivers/scsi/qla2xxx/qla_os.c +2 -0
@@ -1740,6 +1740,8 @@ qla2x00_probe_one(struct pci_dev *pdev,if (ret) goto probe_failed; + ha->isp_ops->enable_intrs (ha); +scsi_scan_host (host);qla2x00_alloc_sysfs_attr (ha);
PATCH 13/71 ALSA: hda - Fix model for Dell Inspiron 1525
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Takashi Iwai <[email protected]>
commit 24918b61b55c21e09a3e07cd82e1b3a8154782dc upstream
Dell Inspiron 1525 seems to have a buggy BIOS setup and screws up the recent codec parser, as reported by Oleksandr Natalenko:
http://lkml.org/lkml/2008/9/12/203
This patch adds the working model, dell-3stack, statically.
--- sound/pci/hda/patch_sigmatel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
sound/pci/hda/patch_sigmatel.c +1 -1
@@ -1667,8 +1667,8 @@ static struct snd_pci_quirk stac927x_cfg/* Dell 3 stack systems with verb table in BIOS */ SND_PCI_QUIRK (PCI_VENDOR_ID_DELL ,0x01f3 ,"Dell Inspiron 1420" ,STAC_DELL_BIOS ),SND_PCI_QUIRK (PCI_VENDOR_ID_DELL ,0x0227 ,"Dell Vostro 1400 " ,STAC_DELL_BIOS ), -SND_PCI_QUIRK (PCI_VENDOR_ID_DELL ,0x022f ,"Dell " ,STAC_DELL_BIOS ),SND_PCI_QUIRK (PCI_VENDOR_ID_DELL ,0x022e ,"Dell " ,STAC_DELL_BIOS ), +SND_PCI_QUIRK (PCI_VENDOR_ID_DELL ,0x022f ,"Dell Inspiron 1525" ,STAC_DELL_3ST ),SND_PCI_QUIRK (PCI_VENDOR_ID_DELL ,0x0242 ,"Dell " ,STAC_DELL_BIOS ),SND_PCI_QUIRK (PCI_VENDOR_ID_DELL ,0x0243 ,"Dell " ,STAC_DELL_BIOS ), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02ff, "Dell ", STAC_DELL_BIOS),
PATCH 14/71 ALSA: oxygen: fix distorted output on AK4396-based cards
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Clemens Ladisch <[email protected]>
Upstream-commit-id: df91bc23dcb052ff2da71b3482bf3c5fbf4b8a53
When changing the sample rate, the CMI8788's master clock output becomes unstable for a short time. The AK4396 needs the master clock to do SPI writes, so writing to an AK4396 control register directly after a sample rate change will garble the value. In our case, this leads to the DACs being misconfigured to I2S sample format, which results in a wrong output level and horrible distortions on samples louder than -6 dB.
To fix this, we need to wait until the new master clock signal has become stable before doing SPI writes.
--- sound/pci/oxygen/hifier.c | 4 ++++ sound/pci/oxygen/oxygen.c | 4 ++++ 2 files changed, 8 insertions(+)
sound/pci/oxygen/hifier.c +4 -0
@@ -17,6 +17,7 @@* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include <linux/delay.h> #include <linux/pci.h> #include <sound/control.h> #include <sound/core.h>
@@ -95,6 +96,9 @@ static void set_ak4396_params(struct oxyelse value |=AK4396_DFS_QUAD ; data->ak4396_ctl2 = value; + +msleep (1 );/* wait for the new MCLK to become stable */ +ak4396_write (chip,AK4396_CONTROL_1 ,AK4396_DIF_24_MSB );ak4396_write (chip,AK4396_CONTROL_2 , value);ak4396_write (chip,AK4396_CONTROL_1 ,AK4396_DIF_24_MSB |AK4396_RSTN );
sound/pci/oxygen/oxygen.c +4 -0
@@ -28,6 +28,7 @@* GPIO 1 -> DFS1 of AK5385 */ +#include <linux/delay.h> #include <linux/mutex.h> #include <linux/pci.h> #include <sound/ac97_codec.h>
@@ -173,6 +174,9 @@ static void set_ak4396_params(struct oxyelse value |=AK4396_DFS_QUAD ; data->ak4396_ctl2 = value; + +msleep (1 );/* wait for the new MCLK to become stable */ +for (i =0 ; i <4 ; ++i) {ak4396_write (chip, i,AK4396_CONTROL_1 ,AK4396_DIF_24_MSB );
PATCH 15/71 ALSA: fix locking in snd_pcm_open*() and snd_rawmidi_open*()
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Takashi Iwai <[email protected]>
Upstream-commit-id: 399ccdc1cd4e92e541d4dacbbf18c52bd693418b
The PCM and rawmidi open callbacks have a lock against card->controls_list but it takes a wrong one, card->controls_rwsem, instead of a right one card->ctl_files_rwlock. This patch fixes them.
This change also fixes automatically the potential deadlocks due to mm->mmap_sem in munmap and copy_from/to_user, reported by Sitsofe Wheeler:
A: snd_ctl_elem_user_tlv(): card->controls_rwsem => mm->mmap_sem
B: snd_pcm_open(): card->open_mutex => card->controls_rwsem
C: munmap: mm->mmap_sem => snd_pcm_release(): card->open_mutex
The patch breaks the chain.
--- sound/core/pcm.c | 4 ++-- sound/core/rawmidi.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-)
sound/core/pcm.c +2 -2
@@ -781,7 +781,7 @@ int snd_pcm_attach_substream(struct snd_return -ENODEV ; card = pcm->card; -down_read (&card->controls_rwsem); +read_lock (&card->ctl_files_rwlock);list_for_each_entry (kctl, &card->ctl_files, list) {if (kctl->pid == current->pid) { prefer_subdevice = kctl->prefer_pcm_subdevice;
@@ -789,7 +789,7 @@ int snd_pcm_attach_substream(struct snd_break ; } } -up_read (&card->controls_rwsem); +read_unlock (&card->ctl_files_rwlock);switch (stream) {case SNDRV_PCM_STREAM_PLAYBACK :
sound/core/rawmidi.c +2 -2
@@ -418,7 +418,7 @@ static int snd_rawmidi_open(struct inodemutex_lock (&rmidi->open_mutex);while (1 ) { subdevice =-1 ; -down_read (&card->controls_rwsem); +read_lock (&card->ctl_files_rwlock);list_for_each_entry (kctl, &card->ctl_files, list) {if (kctl->pid == current->pid) { subdevice = kctl->prefer_rawmidi_subdevice;
@@ -426,7 +426,7 @@ static int snd_rawmidi_open(struct inodebreak ; } } -up_read (&card->controls_rwsem); +read_unlock (&card->ctl_files_rwlock); err =snd_rawmidi_kernel_open (rmidi->card, rmidi->device, subdevice, fflags, rawmidi_file);if (err >=0 )
PATCH 16/71 ALSA: remove unneeded power_mutex lock in snd_pcm_drop
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Takashi Iwai <[email protected]>
Upstream-commit-id: 24e8fc498e9618338854bfbcf8d1d737e0bf1775
The power_mutex lock in snd_pcm_drop may cause a possible deadlock chain, and above all, it's unneeded. Let's get rid of it.
--- sound/core/pcm_native.c | 13 +++---------- 1 file changed, 3 insertions(+), 10 deletions(-)
sound/core/pcm_native.c +3 -10
@@ -1545,16 +1545,10 @@ static int snd_pcm_drop(struct snd_pcm_s card = substream->pcm->card;if (runtime->status->state ==SNDRV_PCM_STATE_OPEN || - runtime->status->state ==SNDRV_PCM_STATE_DISCONNECTED ) + runtime->status->state ==SNDRV_PCM_STATE_DISCONNECTED || + runtime->status->state ==SNDRV_PCM_STATE_SUSPENDED )return -EBADFD ; -snd_power_lock (card); -if (runtime->status->state ==SNDRV_PCM_STATE_SUSPENDED ) { - result =snd_power_wait (card,SNDRV_CTL_POWER_D0 ); -if (result <0 ) - goto _unlock; - } -snd_pcm_stream_lock_irq (substream);/* resume pause */ if (runtime->status->state ==SNDRV_PCM_STATE_PAUSED )
@@ -1563,8 +1557,7 @@ static int snd_pcm_drop(struct snd_pcm_ssnd_pcm_stop (substream,SNDRV_PCM_STATE_SETUP );/* runtime->control->appl_ptr = runtime->status->hw_ptr; */ snd_pcm_stream_unlock_irq (substream); - _unlock: -snd_power_unlock (card); +return result; }
PATCH 17/71 KVM: SVM: fix random segfaults with NPT enabled
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Joerg Roedel <[email protected]>
(cherry picked from commit 44874f84918e37b64bec6df1587e5fe2fdf6ab62)
This patch introduces a guest TLB flush on every NPF exit in KVM. This fixes random segfaults and #UD exceptions in the guest seen under some workloads (e.g. long running compile workloads or tbench). A kernbench run with and without that fix showed that it has a slowdown lower than 0.5%
--- arch/x86/kvm/svm.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
arch/x86/kvm/svm.c +10 -0
@@ -60,6 +60,7 @@ static int npt = 1;module_param (npt, int,S_IRUGO );static void kvm_reput_irq (struct vcpu_svm *svm); +static void svm_flush_tlb (struct kvm_vcpu *vcpu);static inline struct vcpu_svm *to_svm (struct kvm_vcpu *vcpu) {
@@ -1017,6 +1018,15 @@ static int pf_interception(struct vcpu_s fault_address = svm->vmcb->control.exit_info_2; error_code = svm->vmcb->control.exit_info_1; + +/* +* FIXME: Tis shouldn't be necessary here, but there is a flush +* missing in the MMU code. Until we find this bug, flush the +* complete TLB here on an NPF +*/ +if (npt_enabled) +svm_flush_tlb (&svm->vcpu); +if (event_injection)kvm_mmu_unprotect_page_virt (&svm->vcpu, fault_address);return kvm_mmu_page_fault (&svm->vcpu, fault_address, error_code);
PATCH 18/71 KVM: SVM: fix guest global tlb flushes with NPT
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Joerg Roedel <[email protected]>
(cherry picked from commit e5eab0cede4b1ffaca4ad857d840127622038e55)
Accesses to CR4 are intercepted even with Nested Paging enabled. But the code does not check if the guest wants to do a global TLB flush. So this flush gets lost. This patch adds the check and the flush to svm_set_cr4.
--- arch/x86/kvm/svm.c | 4 ++++ 1 file changed, 4 insertions(+)
arch/x86/kvm/svm.c +4 -0
@@ -880,6 +880,10 @@ set:static void svm_set_cr4 (struct kvm_vcpu *vcpu,unsigned long cr4) {unsigned long host_cr4_mce =read_cr4 () &X86_CR4_MCE ; +unsigned long old_cr4 =to_svm (vcpu)->vmcb->save.cr4; + +if (npt_enabled && ((old_cr4 ^ cr4) &X86_CR4_PGE )) +force_new_asid (vcpu); vcpu->arch.cr4 = cr4;if (!npt_enabled)
PATCH 19/71 x86-64: Clean up save/restore_i387() usage
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Linus Torvalds <[email protected]>
[ Upstream commit b30f3ae50cd03ef2ff433a5030fbf88dd8323528]
Suresh Siddha wants to fix a possible FPU leakage in error conditions, but the fact that save/restore_i387() are inlines in a header file makes that harder to do than necessary. So start off with an obvious cleanup.
This just moves the x86-64 version of save/restore_i387() out of the header file, and moves it to the only file that it is actually used in:arch/x86/kernel/signal_64.c. So exposing it in a header file was wrong to begin with.
[ Side note: I'd like to fix up some of the games we play with the
32-bit version of these functions too, but that's a separate matter. The 32-bit versions are shared - under different names at that! - by both the native x86-32 code and the x86-64 32-bit compatibility code ]
---
--- arch/x86/kernel/signal_64.c | 53 +++++++++++++++++++++++++++++++++++++++++++ include/asm-x86/i387.h | 54 -------------------------------------------- 2 files changed, 53 insertions(+), 54 deletions(-)
arch/x86/kernel/signal_64.c +53 -0
@@ -53,6 +53,59 @@ sys_sigaltstack(const stack_t __user *usreturn do_sigaltstack (uss, uoss, regs->sp); } +/* +* Signal frame handlers. +*/ + +static inline int save_i387 (struct _fpstate __user *buf) +{ +struct task_struct *tsk = current; +int err =0 ; + +BUILD_BUG_ON (sizeof (struct user_i387_struct ) != +sizeof (tsk->thread.xstate->fxsave)); + +if ((unsigned long )buf %16 ) +printk ("save_i387: bad fpstate %p\n" , buf); + +if (!used_math ()) +return 0 ; +clear_used_math ();/* trigger finit */ +if (task_thread_info (tsk)->status &TS_USEDFPU ) { + err =save_i387_checking ((struct i387_fxsave_struct __user *) + buf); +if (err) +return err; +task_thread_info (tsk)->status &= ~TS_USEDFPU ; +stts (); + }else { +if (__copy_to_user (buf, &tsk->thread.xstate->fxsave, +sizeof (struct i387_fxsave_struct ))) +return -1 ; + } +return 1 ; +} + +/* +* This restores directly out of user space. Exceptions are handled. +*/ +static inline int restore_i387 (struct _fpstate __user *buf) +{ +struct task_struct *tsk = current; +int err; + +if (!used_math ()) { + err =init_fpu (tsk); +if (err) +return err; + } + +if (!(task_thread_info (current)->status &TS_USEDFPU )) { +clts (); +task_thread_info (current)->status |=TS_USEDFPU ; + } +return restore_fpu_checking ((__force struct i387_fxsave_struct *)buf); +}/* * Do a signal return; undo the signal stack.
include/asm-x86/i387.h +0 -54
60 lines not on this page · raw message
PATCH 20/71 x64, fpu: fix possible FPU leakage in error conditions
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Suresh Siddha <[email protected]>
[Upstream commit: 6ffac1e90a17ea0aded5c581204397421eec91b6]
Quoted 3 lines · Linus Torvalds
So how about this patch as a starting point? This is the RightThing(tm) to do regardless, and if it then makes it easier to do some other cleanups, we should do it first. What do you think?
restore_fpu_checking() calls init_fpu() in error conditions.
While this is wrong(as our main intention is to clear the fpu state of the thread), this was benign before commit 92d140e21f1 ("x86: fix taking DNA during 64bit sigreturn").
Post commit 92d140e21f1, live FPU registers may not belong to this process at this error scenario.
In the error condition for restore_fpu_checking() (especially during the 64bit signal return), we are doing init_fpu(), which saves the live FPU register state (possibly belonging to some other process context) into the thread struct (through unlazy_fpu() in init_fpu()). This is wrong and can leak the FPU data.
For the signal handler restore error condition in restore_i387(), clear the fpu state present in the thread struct(before ultimately sending a SIGSEGV for badframe).
For the paranoid error condition check in math_state_restore(), send a SIGSEGV, if we fail to restore the state.
--- arch/x86/kernel/signal_64.c | 11 ++++++++++- arch/x86/kernel/traps_64.c | 9 ++++++++- include/asm-x86/i387.h | 2 -- 3 files changed, 18 insertions(+), 4 deletions(-)
arch/x86/kernel/signal_64.c +10 -1
@@ -104,7 +104,16 @@ static inline int restore_i387(struct _fclts ();task_thread_info (current)->status |=TS_USEDFPU ; } -return restore_fpu_checking ((__force struct i387_fxsave_struct *)buf); + err =restore_fpu_checking ((__force struct i387_fxsave_struct *)buf); +if (unlikely (err)) { +/* +* Encountered an error while doing the restore from the +* user buffer, clear the fpu state. +*/ +clear_fpu (tsk); +clear_used_math (); + } +return err; }/*
arch/x86/kernel/traps_64.c +8 -1
@@ -1141,7 +1141,14 @@ asmlinkage void math_state_restore(void) }clts ();/* Allow maths ops (or we recurse) */ -restore_fpu_checking (&me->thread.xstate->fxsave); +/* +* Paranoid restore. send a SIGSEGV if we fail to restore the state. +*/ +if (unlikely (restore_fpu_checking (&me->thread.xstate->fxsave))) { +stts (); +force_sig (SIGSEGV , me); +return ; + }task_thread_info (me)->status |=TS_USEDFPU ; me->fpu_counter++; }
include/asm-x86/i387.h +0 -2
@@ -63,8 +63,6 @@ static inline int restore_fpu_checking(s#else : [fx] "cdaSDb" (fx), "m" (*fx), "0" (0));#endif -if (unlikely (err)) -init_fpu (current);return err; }
PATCH 21/71 x86: Fix broken LDT access in VMI
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Zachary Amsden <[email protected]>
commit de59985e3a623d4d5d6207f1777398ca0606ab1c upstream
After investigating a JRE failure, I found this bug was introduced a long time ago, and had already managed to survive another bugfix which occurred on the same line. The result is a total failure of the JRE due to LDT selectors not working properly.
This one took a long time to rear up because LDT usage is not very common, but the bug is quite serious. It got introduced along with another bug, already fixed, by 75b8bb3e56ca09a467fbbe5229bc68627f7445be
--- arch/x86/kernel/vmi_32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/kernel/vmi_32.c +1 -1
@@ -234,7 +234,7 @@ static void vmi_write_ldt_entry(struct d const void *desc) {u32 *ldt_entry = (u32 *)desc; - vmi_ops.write_idt_entry (dt, entry, ldt_entry[0 ], ldt_entry[1 ]); + vmi_ops.write_ldt_entry (dt, entry, ldt_entry[0 ], ldt_entry[1 ]); } static void vmi_load_sp0(struct tss_struct *tss,
PATCH 22/71 block: submit_bh() inadvertently discards barrier flag on a sync write
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Jens Axboe <[email protected]>
commit 48fd4f93a00eac844678629f2f00518e146ed30d upstream
Reported by Milan Broz <[email protected]>, commit 18ce3751 inadvertently made submit_bh() discard the barrier bit for a WRITE_SYNC request. Fix that up.
--- fs/buffer.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-)
fs/buffer.c +8 -5
@@ -2868,14 +2868,17 @@ int submit_bh(int rw, struct buffer_headBUG_ON (!buffer_mapped (bh));BUG_ON (!bh->b_end_io); -if (buffer_ordered (bh) && (rw ==WRITE )) - rw =WRITE_BARRIER ; +/* +* Mask in barrier bit for a write (could be either a WRITE or a +* WRITE_SYNC +*/ +if (buffer_ordered (bh) && (rw &WRITE )) + rw |=WRITE_BARRIER ;/* -* Only clear out a write error when rewriting, should this -* include WRITE_SYNC as well? +* Only clear out a write error when rewriting */ -if (test_set_buffer_req (bh) && (rw ==WRITE || rw ==WRITE_BARRIER )) +if (test_set_buffer_req (bh) && (rw &WRITE ))clear_buffer_write_io_error (bh);/*
PATCH 23/71 sched: fix process time monotonicity
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Balbir Singh <[email protected]>
commit 49048622eae698e5c4ae61f7e71200f265ccc529 upstream
Spencer reported a problem where utime and stime were going negative despite the fixes in commit b27f03d4bdc145a09fb7b0c0e004b29f1ee555fa. The suspected reason for the problem is that signal_struct maintains it's own utime and stime (of exited tasks), these are not updated using the new task_utime() routine, hence sig->utime can go backwards and cause the same problem to occur (sig->utime, adds tsk->utime and not task_utime()). This patch fixes the problem
TODO: using max(task->prev_utime, derived utime) works for now, but a more generic solution is to implement cputime_max() and use the cputime_gt() function for comparison.
--- fs/proc/array.c | 59 -------------------------------------------------- include/linux/sched.h | 4 +++ kernel/exit.c | 6 ++--- kernel/sched.c | 59 ++++++++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 66 insertions(+), 62 deletions(-)
fs/proc/array.c +0 -59
@@ -332,65 +332,6 @@ int proc_pid_status(struct seq_file *m,return 0 ; } -/* -* Use precise platform statistics if available: -*/ -#ifdef CONFIG_VIRT_CPU_ACCOUNTING -static cputime_t task_utime (struct task_struct *p) -{ -return p->utime; -} - -static cputime_t task_stime (struct task_struct *p) -{ -return p->stime; -} -#else -static cputime_t task_utime (struct task_struct *p) -{ -clock_t utime =cputime_to_clock_t (p->utime), - total = utime +cputime_to_clock_t (p->stime); -u64 temp; - -/* -* Use CFS's precise accounting: -*/ - temp = (u64 )nsec_to_clock_t (p->se.sum_exec_runtime); - -if (total) { - temp *= utime; -do_div (temp, total); - } - utime = (clock_t )temp; - - p->prev_utime =max (p->prev_utime,clock_t_to_cputime (utime)); -return p->prev_utime; -} - -static cputime_t task_stime (struct task_struct *p) -{ -clock_t stime; - -/* -* Use CFS's precise accounting. (we subtract utime from -* the total, to make sure the total observed by userspace -* grows monotonically - apps rely on that): -*/ - stime =nsec_to_clock_t (p->se.sum_exec_runtime) - -cputime_to_clock_t (task_utime (p)); - -if (stime >=0 ) - p->prev_stime =max (p->prev_stime,clock_t_to_cputime (stime)); - -return p->prev_stime; -} -#endif - -static cputime_t task_gtime (struct task_struct *p) -{ -return p->gtime; -} -static int do_task_stat (struct seq_file *m,struct pid_namespace *ns,struct pid *pid,struct task_struct *task,int whole) {
include/linux/sched.h +4 -0
@@ -1477,6 +1477,10 @@ static inline void put_task_struct(struc__put_task_struct (t); } +extern cputime_t task_utime (struct task_struct *p); +extern cputime_t task_stime (struct task_struct *p); +extern cputime_t task_gtime (struct task_struct *p); +/* * Per process flags */
kernel/exit.c +3 -3
@@ -111,9 +111,9 @@ static void __exit_signal(struct task_st* We won't ever get here for the group leader, since it * will have been the last reference on the signal_struct. */ - sig->utime =cputime_add (sig->utime, tsk->utime); - sig->stime =cputime_add (sig->stime, tsk->stime); - sig->gtime =cputime_add (sig->gtime, tsk->gtime); + sig->utime =cputime_add (sig->utime,task_utime (tsk)); + sig->stime =cputime_add (sig->stime,task_stime (tsk)); + sig->gtime =cputime_add (sig->gtime,task_gtime (tsk)); sig->min_flt += tsk->min_flt; sig->maj_flt += tsk->maj_flt; sig->nvcsw += tsk->nvcsw;
kernel/sched.c +59 -0
65 lines not on this page · raw message
PATCH 24/71 APIC routing fix
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Yinghai Lu <[email protected]>
commit e0da33646826b66ef933d47ea2fb7a693fd849bf upstream
x86: introduce max_physical_apicid for bigsmp switching
a multi-socket test-system with 3 or 4 ioapics, when 4 dualcore cpus or 2 quadcore cpus installed, needs to switch to bigsmp or physflat.
CPU apic id is [4,11] instead of [0,7], and we need to check max apic id instead of cpu numbers.
also add check for 32 bit when acpi is not compiled in or acpi=off.
--- arch/x86/kernel/apic_32.c | 5 ++++- arch/x86/kernel/apic_64.c | 3 +++ arch/x86/kernel/genapic_64.c | 2 +- arch/x86/kernel/mpparse.c | 5 +++++ arch/x86/kernel/setup.c | 1 + arch/x86/kernel/setup_32.c | 11 ++++++----- arch/x86/mach-generic/bigsmp.c | 2 +- include/asm-x86/mpspec.h | 1 + 8 files changed, 22 insertions(+), 8 deletions(-)
arch/x86/kernel/apic_32.c +4 -1
@@ -1536,6 +1536,9 @@ void __cpuinit generic_processor_info(in*/ cpu =0 ; +if (apicid > max_physical_apicid) + max_physical_apicid = apicid; +/* * Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y * but we need to work other dependencies like SMP_SUSPEND etc
@@ -1543,7 +1546,7 @@ void __cpuinit generic_processor_info(in* if (CPU_HOTPLUG_ENABLED || num_processors > 8) * - Ashok Raj <[email protected]> */ -if (num_processors >8 ) { +if (max_physical_apicid >=8 ) {switch (boot_cpu_data.x86_vendor) {case X86_VENDOR_INTEL :if (!APIC_XAPIC (version)) {
arch/x86/kernel/apic_64.c +3 -0
@@ -1090,6 +1090,9 @@ void __cpuinit generic_processor_info(in*/ cpu =0 ; } +if (apicid > max_physical_apicid) + max_physical_apicid = apicid; +/* are we being called early in kernel startup? */ if (x86_cpu_to_apicid_early_ptr) {u16 *cpu_to_apicid = x86_cpu_to_apicid_early_ptr;
arch/x86/kernel/genapic_64.c +1 -1
@@ -51,7 +51,7 @@ void __init setup_apic_routing(void) else#endif -if (num_possible_cpus () <=8 ) +if (max_physical_apicid <8 ) genapic = &apic_flat;else genapic = &apic_physflat;
arch/x86/kernel/mpparse.c +5 -0
@@ -402,6 +402,11 @@ static int __init smp_read_mpc(struct mp ++mpc_record;#endif } + +#ifdef CONFIG_X86_GENERICARCH +generic_bigsmp_probe (); +#endif +setup_apic_routing ();if (!num_processors)printk (KERN_ERR "MPTABLE: no processors registered!\n" );
arch/x86/kernel/setup_32.c +6 -5
@@ -914,6 +914,12 @@ void __init setup_arch(char **cmdline_p)#ifdef CONFIG_ACPI acpi_boot_init (); +#endif + +#ifdef CONFIG_X86_LOCAL_APIC +if (smp_found_config) +get_smp_config (); +#endif #if defined(CONFIG_SMP ) && defined(CONFIG_X86_PC )if (def_to_bigsmp)
@@ -921,11 +927,6 @@ void __init setup_arch(char **cmdline_p)"CONFIG_X86_PC cannot handle it.\nUse " "CONFIG_X86_GENERICARCH or CONFIG_X86_BIGSMP.\n");#endif -#endif -#ifdef CONFIG_X86_LOCAL_APIC -if (smp_found_config) -get_smp_config (); -#endif e820_register_memory ();e820_mark_nosave_regions ();
arch/x86/kernel/setup.c +1 -0
@@ -17,6 +17,7 @@ unsigned int num_processors;unsigned disabled_cpus__cpuinitdata ;/* Processor that is doing the boot up */ unsigned int boot_cpu_physical_apicid =-1U ; +unsigned int max_physical_apicid;EXPORT_SYMBOL (boot_cpu_physical_apicid);DEFINE_PER_CPU (u16, x86_cpu_to_apicid) =BAD_APICID ;
arch/x86/mach-generic/bigsmp.c +1 -1
@@ -48,7 +48,7 @@ static const struct dmi_system_id bigsmpstatic int probe_bigsmp (void ) {if (def_to_bigsmp) - dmi_bigsmp =1 ; + dmi_bigsmp =1 ;else dmi_check_system (bigsmp_dmi_table);return dmi_bigsmp;
include/asm-x86/mpspec.h +1 -0
@@ -35,6 +35,7 @@ extern DECLARE_BITMAP(mp_bus_not_pci, MAextern int mp_bus_id_to_pci_bus[MAX_MP_BUSSES ];extern unsigned int boot_cpu_physical_apicid; +extern unsigned int max_physical_apicid;extern int smp_found_config;extern int mpc_default_type;extern unsigned long mp_lapic_addr;
PATCH 25/71 ocfs2: Increment the reference count of an already-active stack.
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Joel Becker <[email protected]>
commit d6817cdbd143f87f9d7c59a4c3194091190eeb84 upstream
The ocfs2_stack_driver_request() function failed to increment the refcount of an already-active stack. It only did the increment on the first reference. Whoops.
--- fs/ocfs2/stackglue.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
fs/ocfs2/stackglue.c +4 -3
@@ -97,13 +97,14 @@ static int ocfs2_stack_driver_request(co goto out; } -/* Ok, the stack is pinned */ - p->sp_count++; active_stack = p; - rc =0 ; out: +/* If we found it, pin it */ +if (!rc) + active_stack->sp_count++; +spin_unlock (&ocfs2_stack_lock);return rc; }
PATCH 26/71 sg: disable interrupts inside sg_copy_buffer
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: FUJITA Tomonori <[email protected]>
This is the backport of the upstream commit 50bed2e2862a8f3a4f7d683d0d27292e71ef18b9
The callers of sg_copy_buffer must disable interrupts before calling it (since it uses kmap_atomic). Some callers use it on interrupt-disabled code but some need to take the trouble to disable interrupts just for this. No wonder they forget about it and we hit a bug like:
http://bugzilla.kernel.org/show_bug.cgi?id=11529
James said that it might be better to disable interrupts inside the function rather than risk the callers getting it wrong.
--- lib/scatterlist.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
lib/scatterlist.c +4 -1
@@ -312,8 +312,9 @@ static size_t sg_copy_buffer(struct scatstruct scatterlist *sg;size_t buf_off =0 ;int i; +unsigned long flags; -WARN_ON (!irqs_disabled ()); +local_irq_save (flags);for_each_sg (sgl, sg, nents, i) {struct page *page;
@@ -358,6 +359,8 @@ static size_t sg_copy_buffer(struct scatbreak ; } +local_irq_restore (flags); +return buf_off; }
PATCH 27/71 x86: Fix 27-rc crash on vsmp due to paravirt during module load
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Ravikiran Thirumalai <[email protected]>
commit 05e12e1c4c09cd35ac9f4e6af1e42b0036375d72 upstream.
vsmp_patch has been marked with __init ever since pvops, however, apply_paravirt can be called during module load causing calls to freed memory location.
Since apply_paravirt can only be called during bootup and module load, mark vsmp patch with "__init_or_module"
--- arch/x86/kernel/vsmp_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/kernel/vsmp_64.c +1 -1
@@ -58,7 +58,7 @@ static void vsmp_irq_enable(void)native_restore_fl ((flags |X86_EFLAGS_IF ) & (~X86_EFLAGS_AC )); } -static unsigned __init vsmp_patch (u8 type,u16 clobbers,void *ibuf, +static unsigned __init_or_module vsmp_patch (u8 type,u16 clobbers,void *ibuf,unsigned long addr,unsigned len) {switch (type) {
PATCH 28/71 rt2x00: Use ieee80211_hw->workqueue again
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Ivo van Doorn <[email protected]>
commit 8e260c22238dd8b57aefb1f5e4bd114486a9c17d upstream
Remove the rt2x00 singlethreaded workqueue and move the link tuner and packet filter scheduled work to the ieee80211_hw->workqueue again.
The only exception is the interface scheduled work handler which uses the mac80211 interface iterator under the RTNL lock. This work needs to be handled on the kernel workqueue to prevent lockdep issues.
--- drivers/net/wireless/rt2x00/rt2x00.h | 4 +++- drivers/net/wireless/rt2x00/rt2x00dev.c | 17 +++-------------- drivers/net/wireless/rt2x00/rt2x00mac.c | 4 ++-- 3 files changed, 8 insertions(+), 17 deletions(-)
drivers/net/wireless/rt2x00/rt2x00dev.c +3 -14
@@ -75,7 +75,7 @@ static void rt2x00lib_start_link_tuner(srt2x00lib_reset_link_tuner (rt2x00dev); -queue_delayed_work (rt2x00dev->workqueue, +queue_delayed_work (rt2x00dev->hw->workqueue, &rt2x00dev->link.work,LINK_TUNE_INTERVAL ); }
@@ -390,7 +390,7 @@ static void rt2x00lib_link_tuner(struct* Increase tuner counter, and reschedule the next link tuner run. */ rt2x00dev->link.count++; -queue_delayed_work (rt2x00dev->workqueue, +queue_delayed_work (rt2x00dev->hw->workqueue, &rt2x00dev->link.work,LINK_TUNE_INTERVAL ); }
@@ -488,7 +488,7 @@ void rt2x00lib_beacondone(struct rt2x00_ rt2x00lib_beacondone_iter, rt2x00dev); -queue_work (rt2x00dev->workqueue, &rt2x00dev->intf_work); +schedule_work (&rt2x00dev->intf_work); }EXPORT_SYMBOL_GPL (rt2x00lib_beacondone);
@@ -1131,10 +1131,6 @@ int rt2x00lib_probe_dev(struct rt2x00_de/* * Initialize configuration work. */ - rt2x00dev->workqueue =create_singlethread_workqueue ("rt2x00lib" ); -if (!rt2x00dev->workqueue) - goto exit; -INIT_WORK (&rt2x00dev->intf_work, rt2x00lib_intf_scheduled);INIT_WORK (&rt2x00dev->filter_work, rt2x00lib_packetfilter_scheduled);INIT_DELAYED_WORK (&rt2x00dev->link.work, rt2x00lib_link_tuner);
@@ -1195,13 +1191,6 @@ void rt2x00lib_remove_dev(struct rt2x00_rt2x00leds_unregister (rt2x00dev);/* -* Stop all queued work. Note that most tasks will already be halted -* during rt2x00lib_disable_radio() and rt2x00lib_uninitialize(). -*/ -flush_workqueue (rt2x00dev->workqueue); -destroy_workqueue (rt2x00dev->workqueue); - -/* * Free ieee80211_hw memory. */ rt2x00lib_remove_hw (rt2x00dev);
drivers/net/wireless/rt2x00/rt2x00.h +3 -1
@@ -820,8 +820,10 @@ struct rt2x00_dev {/* * Scheduled work. +* NOTE: intf_work will use ieee80211_iterate_active_interfaces() +* which means it cannot be placed on the hw->workqueue +* due to RTNL locking requirements. */ -struct workqueue_struct *workqueue;struct work_struct intf_work;struct work_struct filter_work;
drivers/net/wireless/rt2x00/rt2x00mac.c +2 -2
@@ -428,7 +428,7 @@ void rt2x00mac_configure_filter(struct iif (!test_bit (DRIVER_REQUIRE_SCHEDULED , &rt2x00dev->flags)) rt2x00dev->ops->lib->config_filter (rt2x00dev, *total_flags);else -queue_work (rt2x00dev->workqueue, &rt2x00dev->filter_work); +queue_work (rt2x00dev->hw->workqueue, &rt2x00dev->filter_work); }EXPORT_SYMBOL_GPL (rt2x00mac_configure_filter);
@@ -509,7 +509,7 @@ void rt2x00mac_bss_info_changed(struct imemcpy (&intf->conf, bss_conf,sizeof (*bss_conf));if (delayed) { intf->delayed_flags |= delayed; -queue_work (rt2x00dev->workqueue, &rt2x00dev->intf_work); +schedule_work (&rt2x00dev->intf_work); }spin_unlock (&intf->lock); }
PATCH 29/71 x86: fdiv bug detection fix
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Krzysztof Helt <[email protected]>
commit e0d22d03c06c4e2c194d7010bc1e4a972199f156 upstream
The fdiv detection code writes s32 integer into the boot_cpu_data.fdiv_bug.
However, the boot_cpu_data.fdiv_bug is only char (s8) field so the detection overwrites already set fields for other bugs, e.g. the f00f bug field.
Use local s32 variable to receive result.
This is a partial fix to Bugzilla #9928 - fixes wrong information about the f00f bug (tested) and probably for coma bug (I have no cpu to test this).
--- arch/x86/kernel/cpu/bugs.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
arch/x86/kernel/cpu/bugs.c +5 -1
@@ -50,6 +50,8 @@ static double __initdata y = 3145727.0;*/ static void __init check_fpu (void ) { +s32 fdiv_bug; +if (!boot_cpu_data.hard_math) {#ifndef CONFIG_MATH_EMULATION printk (KERN_EMERG "No coprocessor found and no math emulation present.\n" );
@@ -70,8 +72,10 @@ static void __init check_fpu(void) "fistpl %0\n\t" "fwait\n\t" "fninit" - : "=m" (*&boot_cpu_data.fdiv_bug) + : "=m" (*&fdiv_bug) : "m" (*&x), "m" (*&y)); + + boot_cpu_data.fdiv_bug = fdiv_bug;if (boot_cpu_data.fdiv_bug)printk ("Hmm, FPU with FDIV bug.\n" ); }
PATCH 30/71 x86: fix oprofile + hibernation badness
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Andi Kleen <[email protected]>
commit 80a8c9fffa78f57d7d4351af2f15a56386805ceb upstream
Vegard Nossum reported oprofile + hibernation problems:
Quoted 5 lines
Now some warnings:
------------[ cut here ]------------ WARNING: at /uio/arkimedes/s29/vegardno/git-working/linux-2.6/kernel/smp.c:328 s mp_call_function_mask+0x194/0x1a0()
The usual problem: the suspend function when interrupts are already disabled calls smp_call_function which is not allowed with interrupt off. But at this point all the other CPUs should be already down anyways, so it should be enough to just drop that.
This patch should fix that problem at least by fixing cpu hotplug& suspend support.
[ [email protected]: fixed 5 coding style errors. ]
Backported by Chuck Ebbert
--- arch/x86/oprofile/nmi_int.c | 39 ++++++++++++++++++++++++++++++++++++--- 1 file changed, 36 insertions(+), 3 deletions(-)
arch/x86/oprofile/nmi_int.c +36 -3
@@ -15,6 +15,7 @@#include <linux/slab.h> #include <linux/moduleparam.h> #include <linux/kdebug.h> +#include <linux/cpu.h> #include <asm/nmi.h> #include <asm/msr.h> #include <asm/apic.h>
@@ -28,23 +29,48 @@ static DEFINE_PER_CPU(unsigned long, savstatic int nmi_start (void );static void nmi_stop (void ); +static void nmi_cpu_start (void *dummy); +static void nmi_cpu_stop (void *dummy);/* 0 == registered but off, 1 == registered and on */ static int nmi_enabled =0 ; +#ifdef CONFIG_SMP +static int oprofile_cpu_notifier (struct notifier_block *b,unsigned long action, +void *data) +{ +int cpu = (unsigned long )data; +switch (action) { +case CPU_DOWN_FAILED : +case CPU_ONLINE : +smp_call_function_single (cpu, nmi_cpu_start,NULL ,0 ,0 ); +break ; +case CPU_DOWN_PREPARE : +smp_call_function_single (cpu, nmi_cpu_stop,NULL ,0 ,1 ); +break ; + } +return NOTIFY_DONE ; +} + +static struct notifier_block oprofile_cpu_nb = { + .notifier_call = oprofile_cpu_notifier +}; +#endif +#ifdef CONFIG_PM static int nmi_suspend (struct sys_device *dev,pm_message_t state) { +/* Only one CPU left, just stop that one */ if (nmi_enabled ==1 ) -nmi_stop (); +nmi_cpu_stop (NULL );return 0 ; }static int nmi_resume (struct sys_device *dev) {if (nmi_enabled ==1 ) -nmi_start (); +nmi_cpu_start (NULL );return 0 ; }
@@ -448,6 +474,9 @@ int __init op_nmi_init(struct oprofile_o }init_sysfs (); +#ifdef CONFIG_SMP +register_cpu_notifier (&oprofile_cpu_nb); +#endif using_nmi =1 ; ops->create_files = nmi_create_files; ops->setup = nmi_setup;
@@ -461,6 +490,10 @@ int __init op_nmi_init(struct oprofile_ovoid op_nmi_exit (void ) { -if (using_nmi) +if (using_nmi) {exit_sysfs (); +#ifdef CONFIG_SMP +unregister_cpu_notifier (&oprofile_cpu_nb); +#endif + } }
PATCH 31/71 x86: PAT proper tracking of set_memory_uc and friends
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Venkatesh Pallipadi <[email protected]>
commit c15238df3b65e34fadb1021b0fb0d5aebc7c42c6 upstream
Big thinko in pat memtype tracking code. reserve_memtype should be called with physical address and not virtual address.
--- arch/x86/mm/pageattr.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
arch/x86/mm/pageattr.c +3 -3
@@ -789,7 +789,7 @@ int set_memory_uc(unsigned long addr, in/* * for now UC MINUS. see comments in ioremap_nocache() */ -if (reserve_memtype (addr, addr + numpages *PAGE_SIZE , +if (reserve_memtype (__pa (addr),__pa (addr) + numpages *PAGE_SIZE , _PAGE_CACHE_UC_MINUS,NULL ))return -EINVAL ;
@@ -808,7 +808,7 @@ int set_memory_wc(unsigned long addr, inif (!pat_wc_enabled)return set_memory_uc (addr, numpages); -if (reserve_memtype (addr, addr + numpages *PAGE_SIZE , +if (reserve_memtype (__pa (addr),__pa (addr) + numpages *PAGE_SIZE , _PAGE_CACHE_WC,NULL ))return -EINVAL ;
@@ -824,7 +824,7 @@ int _set_memory_wb(unsigned long addr, iint set_memory_wb (unsigned long addr,int numpages) { -free_memtype (addr, addr + numpages *PAGE_SIZE ); +free_memtype (__pa (addr),__pa (addr) + numpages *PAGE_SIZE );return _set_memory_wb (addr, numpages); }
PATCH 32/71 x86-64: fix overlap of modules and fixmap areas
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Jan Beulich <[email protected]>
commit 66d4bdf22b8652cda215e2653c8bbec7a767ed57 upstream
Plus add a build time check so this doesn't go unnoticed again.
--- arch/x86/kernel/head64.c | 1 + include/asm-x86/pgtable_64.h | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-)
arch/x86/kernel/head64.c +1 -0
@@ -135,6 +135,7 @@ void __init x86_64_start_kernel(char * rBUILD_BUG_ON (!(MODULES_VADDR > __START_KERNEL));BUILD_BUG_ON (!(((MODULES_END -1 ) &PGDIR_MASK ) == (__START_KERNEL &PGDIR_MASK ))); +BUILD_BUG_ON (__fix_to_virt (__end_of_fixed_addresses) <=MODULES_END );/* clear bss before set_intr_gate with early_idt_handler */ clear_bss ();
include/asm-x86/pgtable_64.h +1 -1
@@ -146,7 +146,7 @@ static inline void native_pgd_clear(pgd_#define VMALLOC_END _AC(0xffffe1ffffffffff, UL)#define VMEMMAP_START _AC(0xffffe20000000000, UL)#define MODULES_VADDR _AC(0xffffffffa0000000, UL) -#define MODULES_END _AC(0xfffffffffff00000, UL) +#define MODULES_END _AC(0xffffffffff000000, UL)#define MODULES_LEN (MODULES_END - MODULES_VADDR)#ifndef __ASSEMBLY__
PATCH 33/71 mm: dirty page tracking race fix
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Nick Piggin <[email protected]>
commit 479db0bf408e65baa14d2a9821abfcbc0804b847 upstream
There is a race with dirty page accounting where a page may not properly be accounted for.
clear_page_dirty_for_io() calls page_mkclean; then TestClearPageDirty.
page_mkclean walks the rmaps for that page, and for each one it cleans and write protects the pte if it was dirty. It uses page_check_address to find the pte. That function has a shortcut to avoid the ptl if the pte is not present. Unfortunately, the pte can be switched to not-present then back to present by other code while holding the page table lock -- this should not be a signal for page_mkclean to ignore that pte, because it may be dirty.
For example, powerpc64's set_pte_at will clear a previously present pte before setting it to the desired value. There may also be other code in core mm or in arch which do similar things.
The consequence of the bug is loss of data integrity due to msync, and loss of dirty page accounting accuracy. XIP's __xip_unmap could easily also be unreliable (depending on the exact XIP locking scheme), which can lead to data corruption.
Fix this by having an option to always take ptl to check the pte in page_check_address.
It's possible to retain this optimization for page_referenced and try_to_unmap.
--- include/linux/rmap.h | 2 +- mm/filemap_xip.c | 2 +- mm/rmap.c | 14 +++++++++----- 3 files changed, 11 insertions(+), 7 deletions(-)
include/linux/rmap.h +1 -1
@@ -94,7 +94,7 @@ int try_to_unmap(struct page *, int igno* Called from mm/filemap_xip.c to unmap empty zero page */ pte_t *page_check_address (struct page *,struct mm_struct *, -unsigned long ,spinlock_t **); +unsigned long ,spinlock_t **,int );/* * Used by swapoff to help locate where page is expected in vma.
mm/filemap_xip.c +1 -1
@@ -184,7 +184,7 @@ __xip_unmap (struct address_space * mapp address = vma->vm_start + ((pgoff - vma->vm_pgoff) <<PAGE_SHIFT );BUG_ON (address < vma->vm_start || address >= vma->vm_end); - pte =page_check_address (page, mm, address, &ptl); + pte =page_check_address (page, mm, address, &ptl,1 );if (pte) {/* Nuke the page table entry. */ flush_cache_page (vma, address,pte_pfn (*pte));
mm/rmap.c +9 -5
@@ -223,10 +223,14 @@ unsigned long page_address_in_vma(struct/* * Check that @page is mapped at @address into @mm. * +* If @sync is false, page_check_address may perform a racy check to avoid +* the page table lock when the pte is not present (helpful when reclaiming +* highly shared pages). +* * On success returns with pte mapped and locked. */ pte_t *page_check_address (struct page *page,struct mm_struct *mm, -unsigned long address,spinlock_t **ptlp) +unsigned long address,spinlock_t **ptlp,int sync) {pgd_t *pgd;pud_t *pud;
@@ -248,7 +252,7 @@ pte_t *page_check_address(struct page *p pte =pte_offset_map (pmd, address);/* Make a quick check before getting the lock */ -if (!pte_present (*pte)) { +if (!sync && !pte_present (*pte)) {pte_unmap (pte);return NULL ; }
@@ -280,7 +284,7 @@ static int page_referenced_one(struct paif (address == -EFAULT ) goto out; - pte =page_check_address (page, mm, address, &ptl); + pte =page_check_address (page, mm, address, &ptl,0 );if (!pte) goto out;
@@ -449,7 +453,7 @@ static int page_mkclean_one(struct pageif (address == -EFAULT ) goto out; - pte =page_check_address (page, mm, address, &ptl); + pte =page_check_address (page, mm, address, &ptl,1 );if (!pte) goto out;
@@ -707,7 +711,7 @@ static int try_to_unmap_one(struct pageif (address == -EFAULT ) goto out; - pte =page_check_address (page, mm, address, &ptl); + pte =page_check_address (page, mm, address, &ptl,0 );if (!pte) goto out;
PATCH 34/71 rtc: fix deadlock
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Ingo Molnar <[email protected]>
commit 38c052f8cff1bd323ccfa968136a9556652ee420 upstream
if get_rtc_time() is _ever_ called with IRQs off, we deadlock badly in it, waiting for jiffies to increment.
So make the code more robust by doing an explicit mdelay(20).
This solves a very hard to reproduce/debug hard lockup reported by Mikael Pettersson.
--- include/asm-generic/rtc.h | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-)
include/asm-generic/rtc.h +4 -8
@@ -15,6 +15,7 @@#include <linux/mc146818rtc.h> #include <linux/rtc.h> #include <linux/bcd.h> +#include <linux/delay.h> #define RTC_PIE 0x40/* periodic interrupt enable */ #define RTC_AIE 0x20/* alarm interrupt enable */
@@ -43,7 +44,6 @@ static inline unsigned char rtc_is_updatstatic inline unsigned int get_rtc_time (struct rtc_time *time) { -unsigned long uip_watchdog = jiffies;unsigned char ctrl;unsigned long flags;
@@ -53,19 +53,15 @@ static inline unsigned int get_rtc_time(/* * read RTC once any update in progress is done. The update -* can take just over 2ms. We wait 10 to 20ms. There is no need to +* can take just over 2ms. We wait 20ms. There is no need to * to poll-wait (up to 1s - eeccch) for the falling edge of RTC_UIP. * If you need to know *exactly* when a second has started, enable * periodic update complete interrupts, (via ioctl) and then * immediately read /dev/rtc which will block until you get the IRQ. * Once the read clears, read the RTC time (again via ioctl). Easy. */ - -if (rtc_is_updating () !=0 ) -while (jiffies - uip_watchdog <2 *HZ /100 ) { -barrier (); -cpu_relax (); - } +if (rtc_is_updating ()) +mdelay (20 );/* * Only the values that we read from the RTC are set. We leave
PATCH 36/71 ACPI: Avoid bogus EC timeout when EC is in Polling mode
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Zhao Yakui <[email protected]>
commit 9d699ed92a459cb408e2577e8bbeabc8ec3989e1 upstream
When EC is in Polling mode, OS will check the EC status continually by using the following source code:
clear_bit(EC_FLAGS_WAIT_GPE, &ec->flags);
while (time_before(jiffies, delay)) {
if (acpi_ec_check_status(ec, event))
return 0;
msleep(1);
}But msleep is realized by the function of schedule_timeout. At the same time although one process is already waken up by some events, it won't be scheduled immediately. So maybe there exists the following phenomena:
a. The current jiffies is already after the predefined jiffies.
But before timeout happens, OS has no chance to check the EC status again.
b. If preemptible schedule is enabled, maybe preempt schedule will happen
before checking loop. When the process is resumed again, maybe timeout already happens, which means that OS has no chance to check the EC status.
In such case maybe EC status is already what OS expects when timeout happens. But OS has no chance to check the EC status and regards it as AE_TIME.
So it will be more appropriate that OS will try to check the EC status again when timeout happens. If the EC status is what we expect, it won't be regarded as timeout. Only when the EC status is not what we expect, it will be regarded as timeout, which means that EC controller can't give a response in time.
http://bugzilla.kernel.org/show_bug.cgi?id=9823
http://bugzilla.kernel.org/show_bug.cgi?id=11141
--- drivers/acpi/ec.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/acpi/ec.c +2 -0
@@ -196,6 +196,8 @@ static int acpi_ec_wait(struct acpi_ec *return 0 ;msleep (1 ); } +if (acpi_ec_check_status (ec,event)) +return 0 ; } pr_err(PREFIX "acpi_ec_wait timeout, status = 0x%2.2x, event = %s\n", acpi_ec_read_status(ec),
PATCH 37/71 x86: add io delay quirk for Presario F700
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Chuck Ebbert <[email protected]>
commit e6a5652fd156a286faadbf7a4062b5354d4e346e upstream
Manually adding "io_delay=0xed" fixes system lockups in ioapic mode on this machine.
System Information
Manufacturer: Hewlett-Packard
Product Name: Presario F700 (KA695EA#ABF)
Base Board Information
Manufacturer: Quanta
Product Name: 30D3
Reference:
https://bugzilla.redhat.com/show_bug.cgi?id=459546
--- arch/x86/kernel/io_delay.c | 8 ++++++++ 1 file changed, 8 insertions(+)
arch/x86/kernel/io_delay.c +8 -0
@@ -92,6 +92,14 @@ static struct dmi_system_id __initdata i DMI_MATCH(DMI_BOARD_NAME, "30BF") } }, + { + .callback = dmi_io_delay_0xed_port, + .ident = "Presario F700", + .matches = { +DMI_MATCH (DMI_BOARD_VENDOR ,"Quanta" ), + DMI_MATCH(DMI_BOARD_NAME, "30D3") + } + }, { } };
PATCH 38/71 x86: fix memmap=exactmap boot argument
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Prarit Bhargava <[email protected]>
Backport of d6be118a97ce51ca84035270f91c2bccecbfac5f by Chuck Ebbert
When using kdump modifying the e820 map is yielding strange results.
For example starting with
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000100 - 0000000000093400 (usable)
BIOS-e820: 0000000000093400 - 00000000000a0000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fee0000 (usable)
BIOS-e820: 000000003fee0000 - 000000003fef3000 (ACPI data)
BIOS-e820: 000000003fef3000 - 000000003ff80000 (ACPI NVS)
BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
and booting with args
memmap=exactmap memmap=640K@0K memmap=5228K@16384K memmap=125188K@22252K memmap=76K#1047424K memmap=564K#1047500K
resulted in:
user-defined physical RAM map:
user: 0000000000000000 - 0000000000093400 (usable)
user: 0000000000093400 - 00000000000a0000 (reserved)
user: 0000000000100000 - 000000003fee0000 (usable)
user: 000000003fee0000 - 000000003fef3000 (ACPI data)
user: 000000003fef3000 - 000000003ff80000 (ACPI NVS)
user: 000000003ff80000 - 0000000040000000 (reserved)
user: 00000000e0000000 - 00000000f0000000 (reserved)
user: 00000000fec00000 - 00000000fec10000 (reserved)
user: 00000000fee00000 - 00000000fee01000 (reserved)
user: 00000000ff000000 - 0000000100000000 (reserved)
But should have resulted in:
user-defined physical RAM map:
user: 0000000000000000 - 00000000000a0000 (usable)
user: 0000000001000000 - 000000000151b000 (usable)
user: 00000000015bb000 - 0000000008ffc000 (usable)
user: 000000003fee0000 - 000000003ff80000 (ACPI data)
This is happening because of an improper usage of strcmp() in the e820 parsing code. The strcmp() always returns !0 and never resets the value for e820.nr_map and returns an incorrect user-defined map.
This patch fixes the problem.
--- arch/x86/kernel/e820_32.c | 2 +- arch/x86/kernel/e820_64.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
arch/x86/kernel/e820_32.c +1 -1
@@ -697,7 +697,7 @@ static int __init parse_memmap(char *argif (!arg)return -EINVAL ; -if (strcmp (arg,"exactmap" ) ==0 ) { +if (strncmp (arg,"exactmap" ,8 ) ==0 ) {#ifdef CONFIG_CRASH_DUMP /* If we are doing a crash dump, we * still need to know the real mem
arch/x86/kernel/e820_64.c +1 -1
@@ -776,7 +776,7 @@ static int __init parse_memmap_opt(charchar *oldp;unsigned long long start_at, mem_size; -if (!strcmp (p,"exactmap" )) { +if (!strncmp (p,"exactmap" ,8 )) {#ifdef CONFIG_CRASH_DUMP /* * If we are doing a crash dump, we still need to know
PATCH 39/71 clockevents: prevent clockevent event_handler ending up handler_noop
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Venkatesh Pallipadi <[email protected]>
commit 7c1e76897492d92b6a1c2d6892494d39ded9680c upstream
There is a ordering related problem with clockevents code, due to which clockevents_register_device() called after tickless/highres switch will not work. The new clockevent ends up with clockevents_handle_noop as event handler, resulting in no timer activity.
The problematic path seems to be
* old device already has hrtimer_interrupt as the event_handler
* new clockevent device registers with a higher rating
* tick_check_new_device() is called
* clockevents_exchange_device() gets called
* old->event_handler is set to clockevents_handle_noop
* tick_setup_device() is called for the new device
* which sets new->event_handler using the old->event_handler which is noop.
Change the ordering so that new device inherits the proper handler.
This does not have any issue in normal case as most likely all the clockevent devices are setup before the highres switch. But, can potentially be affecting some corner case where HPET force detect happens after the highres switch. This was a problem with HPET in MSI mode code that we have been experimenting with.
--- include/linux/clockchips.h | 2 ++ kernel/time/clockevents.c | 3 +-- kernel/time/tick-common.c | 1 + 3 files changed, 4 insertions(+), 2 deletions(-)
include/linux/clockchips.h +2 -0
@@ -127,6 +127,8 @@ extern int clockevents_register_notifierextern int clockevents_program_event (struct clock_event_device *dev,ktime_t expires,ktime_t now); +extern void clockevents_handle_noop (struct clock_event_device *dev); +#ifdef CONFIG_GENERIC_CLOCKEVENTS extern void clockevents_notify (unsigned long reason,void *arg);#else
kernel/time/clockevents.c +1 -2
@@ -177,7 +177,7 @@ void clockevents_register_device(struct/* * Noop handler when we shut down an event device */ -static void clockevents_handle_noop (struct clock_event_device *dev) +void clockevents_handle_noop (struct clock_event_device *dev) { }
@@ -199,7 +199,6 @@ void clockevents_exchange_device(struct* released list and do a notify add later. */ if (old) { - old->event_handler = clockevents_handle_noop;clockevents_set_mode (old,CLOCK_EVT_MODE_UNUSED );list_del (&old->list);list_add (&old->list, &clockevents_released);
kernel/time/tick-common.c +1 -0
@@ -161,6 +161,7 @@ static void tick_setup_device(struct tic }else { handler = td->evtdev->event_handler; next_event = td->evtdev->next_event; + td->evtdev->event_handler = clockevents_handle_noop; } td->evtdev = newdev;
PATCH 40/71 clockevents: prevent endless loop in periodic broadcast handler
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Thomas Gleixner <[email protected]>
commit d4496b39559c6d43f83e4c08b899984f8b8089b5 upstream
The reprogramming of the periodic broadcast handler was broken, when the first programming returned -ETIME. The clockevents code stores the new expiry value in the clock events device next_event field only when the programming time has not been elapsed yet. The loop in question calculates the new expiry value from the next_event value and therefor never increases.
--- kernel/time/tick-broadcast.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-)
kernel/time/tick-broadcast.c +8 -3
@@ -174,6 +174,8 @@ static void tick_do_periodic_broadcast(v*/ static void tick_handle_periodic_broadcast (struct clock_event_device *dev) { +ktime_t next; +tick_do_periodic_broadcast ();/*
@@ -184,10 +186,13 @@ static void tick_handle_periodic_broadca/* * Setup the next period for devices, which do not have -* periodic mode: +* periodic mode. We read dev->next_event first and add to it +* when the event alrady expired. clockevents_program_event() +* sets dev->next_event only when the event is really +* programmed to the device. */ -for (;;) { -ktime_t next =ktime_add (dev->next_event, tick_period); +for (next = dev->next_event; ;) { + next =ktime_add (next, tick_period);if (!clockevents_program_event (dev, next,ktime_get ()))return ;
PATCH 41/71 clockevents: enforce reprogram in oneshot setup
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Thomas Gleixner <[email protected]>
commit 7205656ab48da29a95d7f55e43a81db755d3cb3a upstream
In tick_oneshot_setup we program the device to the given next_event, but we do not check the return value. We need to make sure that the device is programmed enforced so the interrupt handler engine starts working. Split out the reprogramming function from tick_program_event() and call it with the device, which was handed in to tick_setup_oneshot(). Set the force argument, so the devices is firing an interrupt.
--- kernel/time/tick-oneshot.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-)
kernel/time/tick-oneshot.c +14 -4
@@ -23,11 +23,11 @@#include "tick-internal.h" /** -* tick_program_event +* tick_program_event internal worker function */ -int tick_program_event (ktime_t expires,int force) +static int __tick_program_event (struct clock_event_device *dev, +ktime_t expires,int force) { -struct clock_event_device *dev =__get_cpu_var (tick_cpu_device).evtdev;ktime_t now =ktime_get ();while (1 ) {
@@ -41,6 +41,16 @@ int tick_program_event(ktime_t expires, }/** +* tick_program_event +*/ +int tick_program_event (ktime_t expires,int force) +{ +struct clock_event_device *dev =__get_cpu_var (tick_cpu_device).evtdev; + +return __tick_program_event (dev, expires, force); +} + +/** * tick_resume_onshot - resume oneshot mode */ void tick_resume_oneshot (void )
@@ -61,7 +71,7 @@ void tick_setup_oneshot(struct clock_eve { newdev->event_handler = handler;clockevents_set_mode (newdev,CLOCK_EVT_MODE_ONESHOT ); -clockevents_program_event (newdev, next_event,ktime_get ()); +__tick_program_event (newdev, next_event,1 ); }/**
PATCH 42/71 clockevents: prevent multiple init/shutdown
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Thomas Gleixner <[email protected]>
commit 9c17bcda991000351cb2373f78be7e4b1c44caa3 upstream
While chasing the C1E/HPET bugreports I went through the clock events code inch by inch and found that the broadcast device can be initialized and shutdown multiple times. Multiple shutdowns are not critical, but useless waste of time. Multiple initializations are simply broken. Another CPU might have the device in use already after the first initialization and the second init could just render it unusable again.
--- kernel/time/tick-broadcast.c | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-)
kernel/time/tick-broadcast.c +13 -7
@@ -209,7 +209,7 @@ static void tick_do_broadcast_on_off(voistruct clock_event_device *bc, *dev;struct tick_device *td;unsigned long flags, *reason = why; -int cpu; +int cpu, bc_stopped;spin_lock_irqsave (&tick_broadcast_lock, flags);
@@ -227,6 +227,8 @@ static void tick_do_broadcast_on_off(voiif (!tick_device_is_functional (dev)) goto out; + bc_stopped =cpus_empty (tick_broadcast_mask); +switch (*reason) {case CLOCK_EVT_NOTIFY_BROADCAST_ON :case CLOCK_EVT_NOTIFY_BROADCAST_FORCE :
@@ -248,9 +250,10 @@ static void tick_do_broadcast_on_off(voibreak ; } -if (cpus_empty (tick_broadcast_mask)) -clockevents_set_mode (bc,CLOCK_EVT_MODE_SHUTDOWN ); -else { +if (cpus_empty (tick_broadcast_mask)) { +if (!bc_stopped) +clockevents_set_mode (bc,CLOCK_EVT_MODE_SHUTDOWN ); + }else if (bc_stopped) {if (tick_broadcast_device.mode ==TICKDEV_MODE_PERIODIC )tick_broadcast_start_periodic (bc);else
@@ -500,9 +503,12 @@ static void tick_broadcast_clear_oneshot*/ void tick_broadcast_setup_oneshot (struct clock_event_device *bc) { - bc->event_handler = tick_handle_oneshot_broadcast; -clockevents_set_mode (bc,CLOCK_EVT_MODE_ONESHOT ); - bc->next_event.tv64 =KTIME_MAX ; +/* Set it up only once ! */ +if (bc->event_handler != tick_handle_oneshot_broadcast) { + bc->event_handler = tick_handle_oneshot_broadcast; +clockevents_set_mode (bc,CLOCK_EVT_MODE_ONESHOT ); + bc->next_event.tv64 =KTIME_MAX ; + } }/*
PATCH 43/71 clockevents: prevent endless loop lockup
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Thomas Gleixner <[email protected]>
commit 1fb9b7d29d8e85ba3196eaa7ab871bf76fc98d36 upstream
The C1E/HPET bug reports on AMDX2/RS690 systems where tracked down to a too small value of the HPET minumum delta for programming an event.
The clockevents code needs to enforce an interrupt event on the clock event device in some cases. The enforcement code was stupid and naive, as it just added the minimum delta to the current time and tried to reprogram the device. When the minimum delta is too small, then this loops forever.
Add a sanity check. Allow reprogramming to fail 3 times, then print a warning and double the minimum delta value to make sure, that this does not happen again. Use the same function for both tick-oneshot and tick-broadcast code.
--- kernel/time/tick-broadcast.c | 10 +--------- kernel/time/tick-internal.h | 2 ++ kernel/time/tick-oneshot.c | 36 ++++++++++++++++++++++++++++++------ 3 files changed, 33 insertions(+), 15 deletions(-)
kernel/time/tick-broadcast.c +1 -9
@@ -370,16 +370,8 @@ cpumask_t *tick_get_broadcast_oneshot_mastatic int tick_broadcast_set_event (ktime_t expires,int force) {struct clock_event_device *bc = tick_broadcast_device.evtdev; -ktime_t now =ktime_get (); -int res; -for (;;) { - res =clockevents_program_event (bc, expires, now); -if (!res || !force) -return res; - now =ktime_get (); - expires =ktime_add (now,ktime_set (0 , bc->min_delta_ns)); - } +return tick_dev_program_event (bc, expires, force); }int tick_resume_broadcast_oneshot (struct clock_event_device *bc)
kernel/time/tick-internal.h +2 -0
@@ -17,6 +17,8 @@ extern void tick_handle_periodic(structextern void tick_setup_oneshot (struct clock_event_device *newdev,void (*handler)(struct clock_event_device *),ktime_t nextevt); +extern int tick_dev_program_event (struct clock_event_device *dev, +ktime_t expires,int force);extern int tick_program_event (ktime_t expires,int force);extern void tick_oneshot_notify (void );extern int tick_switch_to_oneshot (void (*handler)(struct clock_event_device *));
kernel/time/tick-oneshot.c +30 -6
@@ -25,18 +25,42 @@/** * tick_program_event internal worker function */ -static int __tick_program_event (struct clock_event_device *dev, -ktime_t expires,int force) +int tick_dev_program_event (struct clock_event_device *dev,ktime_t expires, +int force) {ktime_t now =ktime_get (); +int i; -while (1 ) { +for (i =0 ;;) {int ret =clockevents_program_event (dev, expires, now);if (!ret || !force)return ret; + +/* +* We tried 2 times to program the device with the given +* min_delta_ns. If that's not working then we double it +* and emit a warning. +*/ +if (++i >2 ) { +printk (KERN_WARNING "CE: __tick_program_event of %s is " +"stuck %llx %llx\n" , dev->name ? dev->name :"?" , + now.tv64, expires.tv64); +printk (KERN_WARNING +"CE: increasing min_delta_ns %ld to %ld nsec\n" , + dev->min_delta_ns, dev->min_delta_ns <<1 ); +WARN_ON (1 ); + +/* Double the min. delta and try again */ +if (!dev->min_delta_ns) + dev->min_delta_ns =5000 ; +else + dev->min_delta_ns <<=1 ; + i =0 ; + } + now =ktime_get (); - expires =ktime_add (now,ktime_set (0 , dev->min_delta_ns)); + expires =ktime_add_ns (now, dev->min_delta_ns); } }
@@ -47,7 +71,7 @@ int tick_program_event(ktime_t expires, {struct clock_event_device *dev =__get_cpu_var (tick_cpu_device).evtdev; -return __tick_program_event (dev, expires, force); +return tick_dev_program_event (dev, expires, force); }/**
@@ -71,7 +95,7 @@ void tick_setup_oneshot(struct clock_eve { newdev->event_handler = handler;clockevents_set_mode (newdev,CLOCK_EVT_MODE_ONESHOT ); -__tick_program_event (newdev, next_event,1 ); +tick_dev_program_event (newdev, next_event,1 ); }/**
PATCH 44/71 HPET: make minimum reprogramming delta useful
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Thomas Gleixner <[email protected]>
commit 7cfb0435330364f90f274a26ecdc5f47f738498c upstream
The minimum reprogramming delta was hardcoded in HPET ticks, which is stupid as it does not work with faster running HPETs. The C1E idle patches made this prominent on AMD/RS690 chipsets, where the HPET runs with 25MHz. Set it to 5us which seems to be a reasonable value and fixes the problems on the bug reporters machines. We have a further sanity check now in the clock events, which increases the delta when it is not sufficient.
--- arch/x86/kernel/hpet.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/x86/kernel/hpet.c +2 -2
@@ -223,8 +223,8 @@ static void hpet_legacy_clockevent_regis/* Calculate the min / max delta */ hpet_clockevent.max_delta_ns =clockevent_delta2ns (0x7FFFFFFF , &hpet_clockevent); - hpet_clockevent.min_delta_ns =clockevent_delta2ns (0x30 , - &hpet_clockevent); +/* 5 usec minimum reprogramming delta. */ + hpet_clockevent.min_delta_ns =5000 ;/* * Start hpet with the boot cpu mask and make it
PATCH 45/71 clockevents: broadcast fixup possible waiters
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Thomas Gleixner <[email protected]>
commit 7300711e8c6824fcfbd42a126980ff50439d8dd0 upstream
Until the C1E patches arrived there where no users of periodic broadcast before switching to oneshot mode. Now we need to trigger a possible waiter for a periodic broadcast when switching to oneshot mode. Otherwise we can starve them for ever.
--- kernel/time/tick-broadcast.c | 37 ++++++++++++++++++++++++++++++++++++- 1 file changed, 36 insertions(+), 1 deletion(-)
kernel/time/tick-broadcast.c +36 -1
@@ -490,6 +490,18 @@ static void tick_broadcast_clear_oneshotcpu_clear (cpu, tick_broadcast_oneshot_mask); } +static void tick_broadcast_init_next_event (cpumask_t *mask,ktime_t expires) +{ +struct tick_device *td; +int cpu; + +for_each_cpu_mask_nr (cpu, *mask) { + td = &per_cpu (tick_cpu_device, cpu); +if (td->evtdev) + td->evtdev->next_event = expires; + } +} +/** * tick_broadcast_setup_oneshot - setup the broadcast device */
@@ -497,9 +509,32 @@ void tick_broadcast_setup_oneshot(struct {/* Set it up only once ! */ if (bc->event_handler != tick_handle_oneshot_broadcast) { +int was_periodic = bc->mode ==CLOCK_EVT_MODE_PERIODIC ; +int cpu =smp_processor_id (); +cpumask_t mask; + bc->event_handler = tick_handle_oneshot_broadcast;clockevents_set_mode (bc,CLOCK_EVT_MODE_ONESHOT ); - bc->next_event.tv64 =KTIME_MAX ; + +/* Take the do_timer update */ + tick_do_timer_cpu = cpu; + +/* +* We must be careful here. There might be other CPUs +* waiting for periodic broadcast. We need to set the +* oneshot_mask bits for those and program the +* broadcast device to fire. +*/ + mask = tick_broadcast_mask; +cpu_clear (cpu, mask); +cpus_or (tick_broadcast_oneshot_mask, + tick_broadcast_oneshot_mask, mask); + +if (was_periodic && !cpus_empty (mask)) { +tick_broadcast_init_next_event (&mask, tick_next_period); +tick_broadcast_set_event (tick_next_period,1 ); + }else + bc->next_event.tv64 =KTIME_MAX ; } }
PATCH 46/71 x86: HPET fix moronic 32/64bit thinko
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Thomas Gleixner <[email protected]>
commit f7676254f179eac6b5244a80195ec8ae0e9d4606 upstream
We use the HPET only in 32bit mode because:
1) some HPETs are 32bit only
2) on i386 there is no way to read/write the HPET atomic 64bit wide
The HPET code unification done by the "moron of the year" did not take into account that unsigned long is different on 32 and 64 bit.
This thinko results in a possible endless loop in the clockevents code, when the return comparison fails due to the 64bit/332bit unawareness.
unsigned long cnt = (u32) hpet_read() + delta can wrap over 32bit. but the final compare will fail and return -ETIME causing endless loops.
--- arch/x86/kernel/hpet.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
arch/x86/kernel/hpet.c +4 -4
@@ -283,15 +283,15 @@ static void hpet_legacy_set_mode(enum cl }static int hpet_legacy_next_event (unsigned long delta, -struct clock_event_device *evt) +struct clock_event_device *evt) { -unsigned long cnt; +u32 cnt; cnt =hpet_readl (HPET_COUNTER ); - cnt += delta; + cnt += (u32 ) delta;hpet_writel (cnt,HPET_T0_CMP ); -return ((long )(hpet_readl (HPET_COUNTER ) - cnt ) >0 ) ? -ETIME :0 ; +return (s32)((u32 )hpet_readl (HPET_COUNTER ) - cnt) >=0 ? -ETIME :0 ; }/*
PATCH 47/71 x86: HPET: read back compare register before reading counter
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Thomas Gleixner <[email protected]>
commit 72d43d9bc9210d24d09202eaf219eac09e17b339 upstream
After fixing the u32 thinko I sill had occasional hickups on ATI chipsets with small deltas. There seems to be a delay between writing the compare register and the transffer to the internal register which triggers the interrupt. Reading back the value makes sure, that it hit the internal match register befor we compare against the counter value.
--- arch/x86/kernel/hpet.c | 7 +++++++ 1 file changed, 7 insertions(+)
arch/x86/kernel/hpet.c +7 -0
@@ -291,6 +291,13 @@ static int hpet_legacy_next_event(unsign cnt += (u32 ) delta;hpet_writel (cnt,HPET_T0_CMP ); +/* +* We need to read back the CMP register to make sure that +* what we wrote hit the chip before we compare it to the +* counter. +*/ +WARN_ON ((u32 )hpet_readl (HPET_T0_CMP ) != cnt); +return (s32)((u32 )hpet_readl (HPET_COUNTER ) - cnt) >=0 ? -ETIME :0 ; }
PATCH 48/71 ntp: fix calculation of the next jiffie to trigger RTC sync
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Maciej W. Rozycki <[email protected]>
commit 4ff4b9e19a80b73959ebeb28d1df40176686f0a8 upstream
We have a bug in the calculation of the next jiffie to trigger the RTC synchronisation. The aim here is to run sync_cmos_clock() as close as possible to the middle of a second. Which means we want this function to be called less than or equal to half a jiffie away from when now.tv_nsec equals 5e8 (500000000).
If this is not the case for a given call to the function, for this purpose instead of updating the RTC we calculate the offset in nanoseconds to the next point in time where now.tv_nsec will be equal 5e8. The calculated offset is then converted to jiffies as these are the unit used by the timer.
Hovewer timespec_to_jiffies() used here uses a ceil()-type rounding mode, where the resulting value is rounded up. As a result the range of now.tv_nsec when the timer will trigger is from 5e8 to 5e8 + TICK_NSEC rather than the desired 5e8 - TICK_NSEC / 2 to 5e8 + TICK_NSEC / 2.
As a result if for example sync_cmos_clock() happens to be called at the time when now.tv_nsec is between 5e8 + TICK_NSEC / 2 and 5e8 to 5e8 + TICK_NSEC, it will simply be rescheduled HZ jiffies later, falling in the same range of now.tv_nsec again. Similarly for cases offsetted by an integer multiple of TICK_NSEC.
This change addresses the problem by subtracting TICK_NSEC / 2 from the nanosecond offset to the next point in time where now.tv_nsec will be equal 5e8, effectively shifting the following rounding in timespec_to_jiffies() so that it produces a rounded-to-nearest result.
--- kernel/time/ntp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
kernel/time/ntp.c +1 -1
@@ -245,7 +245,7 @@ static void sync_cmos_clock(unsigned lonif (abs (now.tv_nsec - (NSEC_PER_SEC /2 )) <= tick_nsec /2 ) fail =update_persistent_clock (now); - next.tv_nsec = (NSEC_PER_SEC /2 ) - now.tv_nsec; + next.tv_nsec = (NSEC_PER_SEC /2 ) - now.tv_nsec - (TICK_NSEC /2 );if (next.tv_nsec <=0 ) next.tv_nsec +=NSEC_PER_SEC ;
PATCH 49/71 clockevents: remove WARN_ON which was used to gather information
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Thomas Gleixner <[email protected]>
commit 61c22c34c6f80a8e89cff5ff717627c54cc14fd4 upstream
The issue of the endless reprogramming loop due to a too small min_delta_ns was fixed with the previous updates of the clock events code, but we had no information about the spread of this problem. I added a WARN_ON to get automated information via kerneloops.org and to get some direct reports, which allowed me to analyse the affected machines.
The WARN_ON has served its purpose and would be annoying for a release kernel. Remove it and just keep the information about the increase of the min_delta_ns value.
--- kernel/time/tick-oneshot.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-)
kernel/time/tick-oneshot.c +8 -10
@@ -43,19 +43,17 @@ int tick_dev_program_event(struct clock_* and emit a warning. */ if (++i >2 ) { -printk (KERN_WARNING "CE: __tick_program_event of %s is " -"stuck %llx %llx\n" , dev->name ? dev->name :"?" , - now.tv64, expires.tv64); -printk (KERN_WARNING -"CE: increasing min_delta_ns %ld to %ld nsec\n" , - dev->min_delta_ns, dev->min_delta_ns <<1 ); -WARN_ON (1 ); - -/* Double the min. delta and try again */ +/* Increase the min. delta and try again */ if (!dev->min_delta_ns) dev->min_delta_ns =5000 ;else - dev->min_delta_ns <<=1 ; + dev->min_delta_ns += dev->min_delta_ns >>1 ; + +printk (KERN_WARNING +"CE: %s increasing min_delta_ns to %lu nsec\n" , + dev->name ? dev->name :"?" , + dev->min_delta_ns <<1 ); + i =0 ; }
PATCH 50/71 pcmcia: Fix broken abuse of dev->driver_data
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Alan Cox <[email protected]>
[ Upstream commit: cec5eb7be3a104fffd27ca967ee8e15a123050e2 ]
PCMCIA abuses dev->private_data in the probe methods. Unfortunately it continues to abuse it after calling drv->probe() which leads to crashes and other nasties (such as bogus probes of multifunction devices) giving errors like
pcmcia: registering new device pcmcia0.1
kernel: 0.1: GetNextTuple: No more items
Extract the passed data before calling the driver probe function that way we don't blow up when the driver reuses dev->private_data as its right.
--- drivers/pcmcia/ds.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-)
drivers/pcmcia/ds.c +14 -9
@@ -428,6 +428,18 @@ static int pcmcia_device_probe(struct de p_drv =to_pcmcia_drv (dev->driver); s = p_dev->socket; +/* The PCMCIA code passes the match data in via dev->driver_data +* which is an ugly hack. Once the driver probe is called it may +* and often will overwrite the match data so we must save it first +* +* handle pseudo multifunction devices: +* there are at most two pseudo multifunction devices. +* if we're matching against the first, schedule a +* call which will then check whether there are two +* pseudo devices, and if not, add the second one. +*/ + did = p_dev->dev.driver_data; +ds_dbg (1 ,"trying to bind %s to %s\n" , p_dev->dev.bus_id, p_drv->drv.name);
@@ -456,21 +468,14 @@ static int pcmcia_device_probe(struct de goto put_module; } -/* handle pseudo multifunction devices: -* there are at most two pseudo multifunction devices. -* if we're matching against the first, schedule a -* call which will then check whether there are two -* pseudo devices, and if not, add the second one. -*/ - did = p_dev->dev.driver_data;if (did && (did->match_flags &PCMCIA_DEV_ID_MATCH_DEVICE_NO ) && (p_dev->socket->device_count ==1 ) && (p_dev->device_no ==0 ))pcmcia_add_device_later (p_dev->socket,0 ); - put_module: +put_module:if (ret)module_put (p_drv->owner); - put_dev: +put_dev:if (ret)put_device (dev);return (ret);
PATCH 51/71 af_key: Free dumping state on socket close
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Timo Teras <[email protected]>
[ Upstream commit 0523820482dcb42784572ffd2296c2f08c275a2b ]
Fix a xfrm_{state,policy}_walk leak if pfkey socket is closed while dumping is on-going.
--- net/key/af_key.c | 30 +++++++++++++++++++----------- 1 file changed, 19 insertions(+), 11 deletions(-)
net/key/af_key.c +19 -11
@@ -73,22 +73,18 @@ static int pfkey_can_dump(struct sock *sreturn 0 ; } -static int pfkey_do_dump (struct pfkey_sock *pfk) +static void pfkey_terminate_dump (struct pfkey_sock *pfk) { -int rc; - - rc = pfk->dump.dump (pfk); -if (rc == -ENOBUFS ) -return 0 ; - - pfk->dump.done (pfk); - pfk->dump.dump =NULL ; - pfk->dump.done =NULL ; -return rc; +if (pfk->dump.dump) { + pfk->dump.done (pfk); + pfk->dump.dump =NULL ; + pfk->dump.done =NULL ; + } }static void pfkey_sock_destruct (struct sock *sk) { +pfkey_terminate_dump (pfkey_sk (sk));skb_queue_purge (&sk->sk_receive_queue);if (!sock_flag (sk,SOCK_DEAD )) {
@@ -310,6 +306,18 @@ static int pfkey_broadcast(struct sk_bufreturn err; } +static int pfkey_do_dump (struct pfkey_sock *pfk) +{ +int rc; + + rc = pfk->dump.dump (pfk); +if (rc == -ENOBUFS ) +return 0 ; + +pfkey_terminate_dump (pfk); +return rc; +} +static inline void pfkey_hdr_dup (struct sadb_msg *new,struct sadb_msg *orig) { *new = *orig;
PATCH 52/71 XFRM,IPv6: initialize ip6_dst_blackhole_ops.kmem_cachep
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Arnaud Ebalard <[email protected]>
[ Upstream commit 5dc121e9a7a8a3721cefeb07f3559f50fbedc67e ]
ip6_dst_blackhole_ops.kmem_cachep is not expected to be NULL (i.e. to be initialized) when dst_alloc() is called from ip6_dst_blackhole(). Otherwise, it results in the following (xfrm_larval_drop is now set to 1 by default):
[ 78.697642] Unable to handle kernel paging request for data at address 0x0000004c [ 78.703449] Faulting instruction address: 0xc0097f54 [ 78.786896] Oops: Kernel access of bad area, sig: 11 [#1] [ 78.792791] PowerMac [ 78.798383] Modules linked in: btusb usbhid bluetooth b43 mac80211 cfg80211 ehci_hcd ohci_hcd sungem sungem_phy usbcore ssb [ 78.804263] NIP: c0097f54 LR: c0334a28 CTR: c002d430 [ 78.809997] REGS: eef19ad0 TRAP: 0300 Not tainted (2.6.27-rc5) [ 78.815743] MSR: 00001032 <ME,IR,DR> CR: 22242482 XER: 20000000 [ 78.821550] DAR: 0000004c, DSISR: 40000000 [ 78.827278] TASK = eef0df40[3035] 'mip6d' THREAD: eef18000 [ 78.827408] GPR00: 00001032 eef19b80 eef0df40 00000000 00008020 eef19c30 00000001 00000000 [ 78.833249] GPR08: eee5101c c05a5c10 ef9ad500 00000000 24242422 1005787c 00000000 1004f960 [ 78.839151] GPR16: 00000000 10024e90 10050040 48030018 0fe44150 00000000 00000000 eef19c30 [ 78.845046] GPR24: eef19e44 00000000 eef19bf8 efb37c14 eef19bf8 00008020 00009032 c0596064 [ 78.856671] NIP [c0097f54] kmem_cache_alloc+0x20/0x94 [ 78.862581] LR [c0334a28] dst_alloc+0x40/0xc4 [ 78.868451] Call Trace: [ 78.874252] [eef19b80] [c03c1810] ip6_dst_lookup_tail+0x1c8/0x1dc (unreliable) [ 78.880222] [eef19ba0] [c0334a28] dst_alloc+0x40/0xc4 [ 78.886164] [eef19bb0] [c03cd698] ip6_dst_blackhole+0x28/0x1cc [ 78.892090] [eef19be0] [c03d9be8] rawv6_sendmsg+0x75c/0xc88 [ 78.897999] [eef19cb0] [c038bca4] inet_sendmsg+0x4c/0x78 [ 78.903907] [eef19cd0] [c03207c8] sock_sendmsg+0xac/0xe4 [ 78.909734] [eef19db0] [c03209e4] sys_sendmsg+0x1e4/0x2a0 [ 78.915540] [eef19f00] [c03220a8] sys_socketcall+0xfc/0x210 [ 78.921406] [eef19f40] [c0014b3c] ret_from_syscall+0x0/0x38 [ 78.927295] --- Exception: c01 at 0xfe2d730 [ 78.927297] LR = 0xfe2d71c [ 78.939019] Instruction dump: [ 78.944835] 91640018 9144001c 900a0000 4bffff44 9421ffe0 7c0802a6 bf810010 7c9d2378 [ 78.950694] 90010024 7fc000a6 57c0045e 7c000124 <83e3004c> 8383005c 2f9f0000 419e0050 [ 78.956464] ---[ end trace 05fa1ed7972487a1 ]---
As commented by Benjamin Thery, the bug was introduced by f2fc6a54585a1be6669613a31fbaba2ecbadcd36, while adding network namespaces support to ipv6 routes.
--- net/ipv6/route.c | 2 ++ 1 file changed, 2 insertions(+)
net/ipv6/route.c +2 -0
@@ -2718,6 +2718,8 @@ int __init ip6_route_init(void)if (ret) goto out_kmem_cache; + ip6_dst_blackhole_ops.kmem_cachep = ip6_dst_ops_template.kmem_cachep; +/* Registering of the loopback is done before this portion of code, * the loopback reference in rt6_info will not be taken, do it * manually for init_net */
PATCH 53/71 ipv6: Fix OOPS in ip6_dst_lookup_tail().
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Neil Horman <[email protected]>
[ Upstream commit e550dfb0c2c31b6363aa463a035fc9f8dcaa3c9b ]
This fixes kernel bugzilla 11469: "TUN with 1024 neighbours:ip6_dst_lookup_tail NULL crash"
dst->neighbour is not necessarily hooked up at this point in the processing path, so blindly dereferencing it is the wrong thing to do. This NULL check exists in other similar paths and this case was just an oversight.
Also fix the completely wrong and confusing indentation here while we're at it.
Based upon a patch by Evgeniy Polyakov.
--- net/ipv6/ip6_output.c | 64 +++++++++++++++++++++++++------------------------- 1 file changed, 32 insertions(+), 32 deletions(-)
net/ipv6/ip6_output.c +32 -32
@@ -934,39 +934,39 @@ static int ip6_dst_lookup_tail(struct so }#ifdef CONFIG_IPV6_OPTIMISTIC_DAD -/* -* Here if the dst entry we've looked up -* has a neighbour entry that is in the INCOMPLETE -* state and the src address from the flow is -* marked as OPTIMISTIC, we release the found -* dst entry and replace it instead with the -* dst entry of the nexthop router -*/ -if (!((*dst)->neighbour->nud_state &NUD_VALID )) { -struct inet6_ifaddr *ifp; -struct flowi fl_gw; -int redirect; - - ifp =ipv6_get_ifaddr (net, &fl->fl6_src, - (*dst)->dev,1 ); - - redirect = (ifp && ifp->flags &IFA_F_OPTIMISTIC ); -if (ifp) -in6_ifa_put (ifp); - -if (redirect) { -/* -* We need to get the dst entry for the -* default router instead -*/ -dst_release (*dst); -memcpy (&fl_gw, fl,sizeof (struct flowi )); -memset (&fl_gw.fl6_dst,0 ,sizeof (struct in6_addr )); - *dst =ip6_route_output (net, sk, &fl_gw); -if ((err = (*dst)->error)) - goto out_err_release; - } +/* +* Here if the dst entry we've looked up +* has a neighbour entry that is in the INCOMPLETE +* state and the src address from the flow is +* marked as OPTIMISTIC, we release the found +* dst entry and replace it instead with the +* dst entry of the nexthop router +*/ +if ((*dst)->neighbour && !((*dst)->neighbour->nud_state &NUD_VALID )) { +struct inet6_ifaddr *ifp; +struct flowi fl_gw; +int redirect; + + ifp =ipv6_get_ifaddr (net, &fl->fl6_src, + (*dst)->dev,1 ); + + redirect = (ifp && ifp->flags &IFA_F_OPTIMISTIC ); +if (ifp) +in6_ifa_put (ifp); + +if (redirect) { +/* +* We need to get the dst entry for the +* default router instead +*/ +dst_release (*dst); +memcpy (&fl_gw, fl,sizeof (struct flowi )); +memset (&fl_gw.fl6_dst,0 ,sizeof (struct in6_addr )); + *dst =ip6_route_output (net, sk, &fl_gw); +if ((err = (*dst)->error)) + goto out_err_release; } + }#endif return 0 ;
PATCH 54/71 niu: panic on reset
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Santwona Behera <[email protected]>
[ Upstream commit cff502a38394fd33693f6233e03fca363dfa956d ]
The reset_task function in the niu driver does not reset the tx and rx buffers properly. This leads to panic on reset. This patch is a modified implementation of the previously posted fix.
--- drivers/net/niu.c | 56 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 56 insertions(+)
drivers/net/niu.c +56 -0
@@ -5978,6 +5978,56 @@ static void niu_netif_start(struct niu *niu_enable_interrupts (np,1 ); } +static void niu_reset_buffers (struct niu *np) +{ +int i, j, k, err; + +if (np->rx_rings) { +for (i =0 ; i < np->num_rx_rings; i++) { +struct rx_ring_info *rp = &np->rx_rings[i]; + +for (j =0 , k =0 ; j <MAX_RBR_RING_SIZE ; j++) { +struct page *page; + + page = rp->rxhash[j]; +while (page) { +struct page *next = + (struct page *) page->mapping; +u64 base = page->index; + base = base >>RBR_DESCR_ADDR_SHIFT ; + rp->rbr[k++] =cpu_to_le32 (base); + page = next; + } + } +for (; k <MAX_RBR_RING_SIZE ; k++) { + err =niu_rbr_add_page (np, rp,GFP_ATOMIC , k); +if (unlikely (err)) +break ; + } + + rp->rbr_index = rp->rbr_table_size -1 ; + rp->rcr_index =0 ; + rp->rbr_pending =0 ; + rp->rbr_refill_pending =0 ; + } + } +if (np->tx_rings) { +for (i =0 ; i < np->num_tx_rings; i++) { +struct tx_ring_info *rp = &np->tx_rings[i]; + +for (j =0 ; j <MAX_TX_RING_SIZE ; j++) { +if (rp->tx_buffs[j].skb) + (void )release_tx_packet (np, rp, j); + } + + rp->pending =MAX_TX_RING_SIZE ; + rp->prod =0 ; + rp->cons =0 ; + rp->wrap_bit =0 ; + } + } +} +static void niu_reset_task (struct work_struct *work) { struct niu *np = container_of(work, struct niu, reset_task);
@@ -6000,6 +6050,12 @@ static void niu_reset_task(struct work_sniu_stop_hw (np); +spin_unlock_irqrestore (&np->lock, flags); + +niu_reset_buffers (np); + +spin_lock_irqsave (&np->lock, flags); + err =niu_init_hw (np);if (!err) { np->timer.expires = jiffies +HZ ;
PATCH 55/71 netlink: fix overrun in attribute iteration
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Vegard Nossum <[email protected]>
[ Upstream commit 1045b03e07d85f3545118510a587035536030c1c ]
kmemcheck reported this:
kmemcheck: Caught 16-bit read from uninitialized memory (f6c1ba30) 0500110001508abf050010000500000002017300140000006f72672e66726565
i i i i i i i i i i i i i u u u u u u u u u u u u u u u u u u u
^
Pid: 3462, comm: wpa_supplicant Not tainted (2.6.27-rc3-00054-g6397ab9-dirty #13)
EIP: 0060:[<c05de64a>] EFLAGS: 00010296 CPU: 0
EIP is at nla_parse+0x5a/0xf0
EAX: 00000008 EBX: fffffffd ECX: c06f16c0 EDX: 00000005
ESI: 00000010 EDI: f6c1ba30 EBP: f6367c6c ESP: c0a11e88
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
CR0: 8005003b CR2: f781cc84 CR3: 3632f000 CR4: 000006d0
DR0: c0ead9bc DR1: 00000000 DR2: 00000000 DR3: 00000000
DR6: ffff4ff0 DR7: 00000400
[<c05d4b23>] rtnl_setlink+0x63/0x130 [<c05d5f75>] rtnetlink_rcv_msg+0x165/0x200 [<c05ddf66>] netlink_rcv_skb+0x76/0xa0 [<c05d5dfe>] rtnetlink_rcv+0x1e/0x30 [<c05dda21>] netlink_unicast+0x281/0x290 [<c05ddbe9>] netlink_sendmsg+0x1b9/0x2b0 [<c05beef2>] sock_sendmsg+0xd2/0x100 [<c05bf945>] sys_sendto+0xa5/0xd0 [<c05bf9a6>] sys_send+0x36/0x40 [<c05c03d6>] sys_socketcall+0x1e6/0x2c0 [<c020353b>] sysenter_do_call+0x12/0x3f [<ffffffff>] 0xffffffff
This is the line in nla_ok():
/**
* nla_ok - check if the netlink attribute fits into the remaining bytes
* @nla: netlink attribute
* @remaining: number of bytes remaining in attribute stream */
static inline int nla_ok(const struct nlattr *nla, int remaining)
{
return remaining >= sizeof(*nla) &&
nla->nla_len >= sizeof(*nla) &&
nla->nla_len <= remaining;}
It turns out that remaining can become negative due to alignment in nla_next(). But GCC promotes "remaining" to unsigned in the test against sizeof(*nla) above. Therefore the test succeeds, and the nla_for_each_attr() may access memory outside the received buffer.
A short example illustrating this point is here:
#include <stdio.h>
main(void)
{
printf("%d\n", -1 >= sizeof(int));
}...which prints "1".
This patch adds a cast in front of the sizeof so that GCC will make a signed comparison and fix the illegal memory dereference. With the patch applied, there is no kmemcheck report.
--- include/net/netlink.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
include/net/netlink.h +1 -1
@@ -702,7 +702,7 @@ static inline int nla_len(const struct n*/ static inline int nla_ok (const struct nlattr *nla,int remaining) { -return remaining >=sizeof (*nla) && +return remaining >= (int )sizeof (*nla) && nla->nla_len >=sizeof (*nla) && nla->nla_len <= remaining; }
PATCH 56/71 ipsec: Fix pskb_expand_head corruption in xfrm_state_check_space
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Herbert Xu <[email protected]>
[ Upstream commit d01dbeb6af7a0848063033f73c3d146fec7451f3 ]
We're never supposed to shrink the headroom or tailroom. In fact, shrinking the headroom is a fatal action.
--- net/xfrm/xfrm_output.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)
net/xfrm/xfrm_output.c +7 -3
@@ -27,10 +27,14 @@ static int xfrm_state_check_space(struct -skb_headroom (skb);int ntail = dst->dev->needed_tailroom -skb_tailroom (skb); -if (nhead >0 || ntail >0 ) -return pskb_expand_head (skb, nhead, ntail,GFP_ATOMIC ); +if (nhead <=0 ) { +if (ntail <=0 ) +return 0 ; + nhead =0 ; + }else if (ntail <0 ) + ntail =0 ; -return 0 ; +return pskb_expand_head (skb, nhead, ntail,GFP_ATOMIC ); }static int xfrm_output_one (struct sk_buff *skb,int err)
PATCH 57/71 sctp: do not enable peer features if we cant do them.
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Vlad Yasevich <[email protected]>
[ Upstream commit 0ef46e285c062cbe35d60c0adbff96f530d31c86 ]
Do not enable peer features like addip and auth, if they are administratively disabled localy. If the peer resports that he supports something that we don't, neither end can use it so enabling it is pointless. This solves a problem when talking to a peer that has auth and addip enabled while we do not. Found by Andrei Pelinescu-Onciul <[email protected]>.
--- net/sctp/sm_make_chunk.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)
net/sctp/sm_make_chunk.c +7 -2
@@ -1886,11 +1886,13 @@ static void sctp_process_ext_param(struc/* if the peer reports AUTH, assume that he * supports AUTH. */ - asoc->peer.auth_capable =1 ; +if (sctp_auth_enable) + asoc->peer.auth_capable =1 ;break ;case SCTP_CID_ASCONF :case SCTP_CID_ASCONF_ACK : - asoc->peer.asconf_capable =1 ; +if (sctp_addip_enable) + asoc->peer.asconf_capable =1 ;break ;default :break ;
@@ -2455,6 +2457,9 @@ static int sctp_process_param(struct sctbreak ;case SCTP_PARAM_SET_PRIMARY : +if (!sctp_addip_enable) + goto fall_through; + addr_param = param.v +sizeof (sctp_addip_param_t); af =sctp_get_af_specific (param_type2af (param.p->type));
PATCH 58/71 sctp: Fix oops when INIT-ACK indicates that peer doesnt support AUTH
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Vlad Yasevich <[email protected]>
[ Upstream commit add52379dde2e5300e2d574b172e62c6cf43b3d3 ]
If INIT-ACK is received with SupportedExtensions parameter which indicates that the peer does not support AUTH, the packet will be silently ignore, and sctp_process_init() do cleanup all of the transports in the association.
When T1-Init timer is expires, OOPS happen while we try to choose a different init transport.
The solution is to only clean up the non-active transports, i.e the ones that the peer added. However, that introduces a problem with sctp_connectx(), because we don't mark the proper state for the transports provided by the user. So, we'll simply mark user-provided transports as ACTIVE. That will allow INIT retransmissions to work properly in the sctp_connectx() context and prevent the crash.
--- net/sctp/associola.c | 9 +++++---- net/sctp/sm_make_chunk.c | 6 ++---- 2 files changed, 7 insertions(+), 8 deletions(-)
net/sctp/associola.c +5 -4
@@ -597,11 +597,12 @@ struct sctp_transport *sctp_assoc_add_pe/* Check to see if this is a duplicate. */ peer =sctp_assoc_lookup_paddr (asoc, addr);if (peer) { +/* An UNKNOWN state is only set on transports added by +* user in sctp_connectx() call. Such transports should be +* considered CONFIRMED per RFC 4960, Section 5.4. +*/ if (peer->state ==SCTP_UNKNOWN ) { -if (peer_state ==SCTP_ACTIVE ) - peer->state =SCTP_ACTIVE ; -if (peer_state ==SCTP_UNCONFIRMED ) - peer->state =SCTP_UNCONFIRMED ; + peer->state =SCTP_ACTIVE ; }return peer; }
net/sctp/sm_make_chunk.c +2 -4
@@ -2321,12 +2321,10 @@ clean_up:/* Release the transport structures. */ list_for_each_safe (pos, temp, &asoc->peer.transport_addr_list) { transport = list_entry(pos, struct sctp_transport, transports); -list_del_init (pos); -sctp_transport_free (transport); +if (transport->state !=SCTP_ACTIVE ) +sctp_assoc_rm_peer (asoc, transport); } - asoc->peer.transport_count =0 ; - nomem:return 0 ; }
PATCH 59/71 udp: Fix rcv socket locking
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Herbert Xu <[email protected]>
[ Upstream commit 93821778def10ec1e69aa3ac10adee975dad4ff3 ]
The previous patch in response to the recursive locking on IPsec reception is broken as it tries to drop the BH socket lock while in user context.
This patch fixes it by shrinking the section protected by the socket lock to sock_queue_rcv_skb only. The only reason we added the lock is for the accounting which happens in that function.
--- net/ipv4/udp.c | 59 +++++++++++++++++++++++++++++++-------------------------- 1 file changed, 33 insertions(+), 26 deletions(-)
net/ipv4/udp.c +33 -26
@@ -950,6 +950,27 @@ int udp_disconnect(struct sock *sk, intreturn 0 ; } +static int __udp_queue_rcv_skb (struct sock *sk,struct sk_buff *skb) +{ +int is_udplite =IS_UDPLITE (sk); +int rc; + +if ((rc =sock_queue_rcv_skb (sk, skb)) <0 ) { +/* Note that an ENOMEM error is charged twice */ +if (rc == -ENOMEM ) +UDP_INC_STATS_BH (UDP_MIB_RCVBUFERRORS , + is_udplite); + goto drop; + } + +return 0 ; + +drop: +UDP_INC_STATS_BH (UDP_MIB_INERRORS , is_udplite); +kfree_skb (skb); +return -1 ; +} +/* returns: * -1: error * 0: success
@@ -988,9 +1009,7 @@ int udp_queue_rcv_skb(struct sock * sk, up->encap_rcv != NULL) {int ret; -bh_unlock_sock (sk); ret = (*up->encap_rcv)(sk, skb); -bh_lock_sock (sk);if (ret <=0 ) {UDP_INC_STATS_BH (UDP_MIB_INDATAGRAMS , is_udplite);
@@ -1042,14 +1061,16 @@ int udp_queue_rcv_skb(struct sock * sk, goto drop; } -if ((rc =sock_queue_rcv_skb (sk,skb)) <0 ) { -/* Note that an ENOMEM error is charged twice */ -if (rc == -ENOMEM ) -UDP_INC_STATS_BH (UDP_MIB_RCVBUFERRORS , is_udplite); - goto drop; - } + rc =0 ; -return 0 ; +bh_lock_sock (sk); +if (!sock_owned_by_user (sk)) + rc =__udp_queue_rcv_skb (sk, skb); +else +sk_add_backlog (sk, skb); +bh_unlock_sock (sk); + +return rc; drop:UDP_INC_STATS_BH (UDP_MIB_INERRORS , is_udplite);
@@ -1087,15 +1108,7 @@ static int __udp4_lib_mcast_deliver(stru skb1 =skb_clone (skb,GFP_ATOMIC );if (skb1) { -int ret =0 ; - -bh_lock_sock (sk); -if (!sock_owned_by_user (sk)) - ret =udp_queue_rcv_skb (sk, skb1); -else -sk_add_backlog (sk, skb1); -bh_unlock_sock (sk); - +int ret =udp_queue_rcv_skb (sk, skb1);if (ret >0 )/* we should probably re-process instead * of dropping packets here. */
@@ -1188,13 +1201,7 @@ int __udp4_lib_rcv(struct sk_buff *skb, uh->dest, inet_iif(skb), udptable);if (sk !=NULL ) { -int ret =0 ; -bh_lock_sock (sk); -if (!sock_owned_by_user (sk)) - ret =udp_queue_rcv_skb (sk, skb); -else -sk_add_backlog (sk, skb); -bh_unlock_sock (sk); +int ret =udp_queue_rcv_skb (sk, skb);sock_put (sk);/* a return value > 0 means to resubmit the input, but
@@ -1487,7 +1494,7 @@ struct proto udp_prot = { .sendmsg = udp_sendmsg, .recvmsg = udp_recvmsg, .sendpage = udp_sendpage, - .backlog_rcv = udp_queue_rcv_skb, + .backlog_rcv = __udp_queue_rcv_skb, .hash = udp_lib_hash, .unhash = udp_lib_unhash, .get_port = udp_v4_get_port,
PATCH 60/71 sparc64: Fix PCI error interrupt registry on PSYCHO.
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: David S. Miller <[email protected]>
[ Upstream commit 80a56ab626c70468be92e74cf3d288ffaed23fdb ]
We need to pass IRQF_SHARED, otherwise we get things like:
IRQ handler type mismatch for IRQ 33
current handler: PSYCHO_UE
Call Trace: [000000000048394c] request_irq+0xac/0x120 [00000000007c5f6c] psycho_scan_bus+0x98/0x158 [00000000007c2bc0] pcibios_init+0xdc/0x12c [0000000000426a5c] do_one_initcall+0x1c/0x160 [00000000007c0180] kernel_init+0x9c/0xfc [0000000000427050] kernel_thread+0x30/0x60 [00000000006ae1d0] rest_init+0x10/0x60
on e3500 and similar systems.
On a single board, the UE interrupts of two Psycho nodes are funneled through the same interrupt, from of_debug=3 dump:
/pci@b,4000: direct translate 2ee --> 21
...
/pci@b,2000: direct translate 2ee --> 21
Decimal "33" mentioned above is the hex "21" mentioned here.
Thanks to Meelis Roos for dumps and testing.
--- arch/sparc64/kernel/pci_psycho.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
arch/sparc64/kernel/pci_psycho.c +3 -3
@@ -744,16 +744,16 @@ static void psycho_register_error_handle* the second will just error out since we do not pass in * IRQF_SHARED. */ - err =request_irq (op->irqs[1 ], psycho_ue_intr,0 , + err =request_irq (op->irqs[1 ], psycho_ue_intr,IRQF_SHARED ,"PSYCHO_UE" , pbm); - err =request_irq (op->irqs[2 ], psycho_ce_intr,0 , + err =request_irq (op->irqs[2 ], psycho_ce_intr,IRQF_SHARED ,"PSYCHO_CE" , pbm);/* This one, however, ought not to fail. We can just warn * about it since the system can still operate properly even * if this fails. */ - err =request_irq (op->irqs[0 ], psycho_pcierr_intr,0 , + err =request_irq (op->irqs[0 ], psycho_pcierr_intr,IRQF_SHARED ,"PSYCHO_PCIERR" , pbm);if (err) printk(KERN_WARNING "%s: Could not register PCIERR, "
PATCH 61/71 sparc64: Fix interrupt register calculations on Psycho and Sabre.
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: David S. Miller <[email protected]>
[ Upstream commit ebfb2c63405f2410897674f14e41c031c9302909 ]
Use the IMAP offset calculation for OBIO devices as documented in the programmer's manual. Which is "0x10000 + ((ino & 0x1f) << 3)"
--- arch/sparc64/kernel/prom.c | 104 ++------------------------------------------- 1 file changed, 6 insertions(+), 98 deletions(-)
arch/sparc64/kernel/prom.c +6 -98
@@ -156,55 +156,11 @@ static unsigned long psycho_pcislot_imapreturn PSYCHO_IMAP_B_SLOT0 + (slot *8 ); } -#define PSYCHO_IMAP_SCSI 0x1000UL -#define PSYCHO_IMAP_ETH 0x1008UL -#define PSYCHO_IMAP_BPP 0x1010UL -#define PSYCHO_IMAP_AU_REC 0x1018UL -#define PSYCHO_IMAP_AU_PLAY 0x1020UL -#define PSYCHO_IMAP_PFAIL 0x1028UL -#define PSYCHO_IMAP_KMS 0x1030UL -#define PSYCHO_IMAP_FLPY 0x1038UL -#define PSYCHO_IMAP_SHW 0x1040UL -#define PSYCHO_IMAP_KBD 0x1048UL -#define PSYCHO_IMAP_MS 0x1050UL -#define PSYCHO_IMAP_SER 0x1058UL -#define PSYCHO_IMAP_TIM0 0x1060UL -#define PSYCHO_IMAP_TIM1 0x1068UL -#define PSYCHO_IMAP_UE 0x1070UL -#define PSYCHO_IMAP_CE 0x1078UL -#define PSYCHO_IMAP_A_ERR 0x1080UL -#define PSYCHO_IMAP_B_ERR 0x1088UL -#define PSYCHO_IMAP_PMGMT 0x1090UL -#define PSYCHO_IMAP_GFX 0x1098UL -#define PSYCHO_IMAP_EUPA 0x10a0UL - -static unsigned long __psycho_onboard_imap_off[] = { -/*0x20*/ PSYCHO_IMAP_SCSI , -/*0x21*/ PSYCHO_IMAP_ETH , -/*0x22*/ PSYCHO_IMAP_BPP , -/*0x23*/ PSYCHO_IMAP_AU_REC , -/*0x24*/ PSYCHO_IMAP_AU_PLAY , -/*0x25*/ PSYCHO_IMAP_PFAIL , -/*0x26*/ PSYCHO_IMAP_KMS , -/*0x27*/ PSYCHO_IMAP_FLPY , -/*0x28*/ PSYCHO_IMAP_SHW , -/*0x29*/ PSYCHO_IMAP_KBD , -/*0x2a*/ PSYCHO_IMAP_MS , -/*0x2b*/ PSYCHO_IMAP_SER , -/*0x2c*/ PSYCHO_IMAP_TIM0 , -/*0x2d*/ PSYCHO_IMAP_TIM1 , -/*0x2e*/ PSYCHO_IMAP_UE , -/*0x2f*/ PSYCHO_IMAP_CE , -/*0x30*/ PSYCHO_IMAP_A_ERR , -/*0x31*/ PSYCHO_IMAP_B_ERR , -/*0x32*/ PSYCHO_IMAP_PMGMT , -/*0x33*/ PSYCHO_IMAP_GFX , -/*0x34*/ PSYCHO_IMAP_EUPA , -}; +#define PSYCHO_OBIO_IMAP_BASE 0x1000UL +#define PSYCHO_ONBOARD_IRQ_BASE 0x20 -#define PSYCHO_ONBOARD_IRQ_LAST 0x34#define psycho_onboard_imap_offset (__ino) \ - __psycho_onboard_imap_off[(__ino) - PSYCHO_ONBOARD_IRQ_BASE] + (PSYCHO_OBIO_IMAP_BASE + (((__ino) & 0x1f) << 3))#define PSYCHO_ICLR_A_SLOT0 0x1400UL#define PSYCHO_ICLR_SCSI 0x1800UL
@@ -228,10 +184,6 @@ static unsigned int psycho_irq_build(str imap_off =psycho_pcislot_imap_offset (ino); }else {/* Onboard device */ -if (ino >PSYCHO_ONBOARD_IRQ_LAST ) { -prom_printf ("psycho_irq_build: Wacky INO [%x]\n" , ino); -prom_halt (); - } imap_off =psycho_onboard_imap_offset (ino); }
@@ -318,23 +270,6 @@ static void sabre_wsync_handler(unsigned#define SABRE_IMAP_A_SLOT0 0x0c00UL#define SABRE_IMAP_B_SLOT0 0x0c20UL -#define SABRE_IMAP_SCSI 0x1000UL -#define SABRE_IMAP_ETH 0x1008UL -#define SABRE_IMAP_BPP 0x1010UL -#define SABRE_IMAP_AU_REC 0x1018UL -#define SABRE_IMAP_AU_PLAY 0x1020UL -#define SABRE_IMAP_PFAIL 0x1028UL -#define SABRE_IMAP_KMS 0x1030UL -#define SABRE_IMAP_FLPY 0x1038UL -#define SABRE_IMAP_SHW 0x1040UL -#define SABRE_IMAP_KBD 0x1048UL -#define SABRE_IMAP_MS 0x1050UL -#define SABRE_IMAP_SER 0x1058UL -#define SABRE_IMAP_UE 0x1070UL -#define SABRE_IMAP_CE 0x1078UL -#define SABRE_IMAP_PCIERR 0x1080UL -#define SABRE_IMAP_GFX 0x1098UL -#define SABRE_IMAP_EUPA 0x10a0UL#define SABRE_ICLR_A_SLOT0 0x1400UL#define SABRE_ICLR_B_SLOT0 0x1480UL#define SABRE_ICLR_SCSI 0x1800UL
@@ -364,33 +299,10 @@ static unsigned long sabre_pcislot_imap_return SABRE_IMAP_B_SLOT0 + (slot *8 ); } -static unsigned long __sabre_onboard_imap_off[] = { -/*0x20*/ SABRE_IMAP_SCSI , -/*0x21*/ SABRE_IMAP_ETH , -/*0x22*/ SABRE_IMAP_BPP , -/*0x23*/ SABRE_IMAP_AU_REC , -/*0x24*/ SABRE_IMAP_AU_PLAY , -/*0x25*/ SABRE_IMAP_PFAIL , -/*0x26*/ SABRE_IMAP_KMS , -/*0x27*/ SABRE_IMAP_FLPY , -/*0x28*/ SABRE_IMAP_SHW , -/*0x29*/ SABRE_IMAP_KBD , -/*0x2a*/ SABRE_IMAP_MS , -/*0x2b*/ SABRE_IMAP_SER , -/*0x2c*/ 0 /* reserved */ , -/*0x2d*/ 0 /* reserved */ , -/*0x2e*/ SABRE_IMAP_UE , -/*0x2f*/ SABRE_IMAP_CE , -/*0x30*/ SABRE_IMAP_PCIERR , -/*0x31*/ 0 /* reserved */ , -/*0x32*/ 0 /* reserved */ , -/*0x33*/ SABRE_IMAP_GFX , -/*0x34*/ SABRE_IMAP_EUPA , -}; -#define SABRE_ONBOARD_IRQ_BASE 0x20 -#define SABRE_ONBOARD_IRQ_LAST 0x30 +#define SABRE_OBIO_IMAP_BASE 0x1000UL +#define SABRE_ONBOARD_IRQ_BASE 0x20#define sabre_onboard_imap_offset (__ino) \ - __sabre_onboard_imap_off[(__ino) - SABRE_ONBOARD_IRQ_BASE] + (SABRE_OBIO_IMAP_BASE + (((__ino) & 0x1f) << 3))#define sabre_iclr_offset (ino) \ ((ino & 0x20) ? (SABRE_ICLR_SCSI + (((ino) & 0x1f) << 3)) : \
@@ -453,10 +365,6 @@ static unsigned int sabre_irq_build(stru imap_off =sabre_pcislot_imap_offset (ino); }else {/* onboard device */ -if (ino >SABRE_ONBOARD_IRQ_LAST ) { -prom_printf ("sabre_irq_build: Wacky INO [%x]\n" , ino); -prom_halt (); - } imap_off =sabre_onboard_imap_offset (ino); }
PATCH 62/71 sparc64: Fix OOPS in psycho_pcierr_intr_other().
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: David S. Miller <[email protected]>
[ Upstream commit f948cc6ab9e61a8e88d70ee9aafc690e6d26f92c ]
We no longer put the top-level PCI controller device into the PCI layer device list. So pbm->pci_bus->self is always NULL.
Therefore, use direct PCI config space accesses to get at the PCI controller's PCI_STATUS register.
Tested by Meelis Roos.
--- arch/sparc64/kernel/pci_psycho.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
arch/sparc64/kernel/pci_psycho.c +5 -3
@@ -575,7 +575,7 @@ static irqreturn_t psycho_pcierr_intr_ot {unsigned long csr_reg, csr, csr_error_bits;irqreturn_t ret =IRQ_NONE ; -u16 stat; +u16 stat, *addr;if (is_pbm_a) { csr_reg = pbm->controller_regs +PSYCHO_PCIA_CTRL ;
@@ -597,7 +597,9 @@ static irqreturn_t psycho_pcierr_intr_otprintk ("%s: PCI SERR signal asserted.\n" , pbm->name); ret =IRQ_HANDLED ; } -pci_read_config_word (pbm->pci_bus->self,PCI_STATUS , &stat); + addr =psycho_pci_config_mkaddr (pbm, pbm->pci_first_busno, +0 ,PCI_STATUS ); +pci_config_read16 (addr, &stat); if (stat & (PCI_STATUS_PARITY | PCI_STATUS_SIG_TARGET_ABORT | PCI_STATUS_REC_TARGET_ABORT |
@@ -605,7 +607,7 @@ static irqreturn_t psycho_pcierr_intr_ot PCI_STATUS_SIG_SYSTEM_ERROR)) {printk ("%s: PCI bus error, PCI_STATUS[%04x]\n" , pbm->name, stat); -pci_write_config_word (pbm->pci_bus->self,PCI_STATUS ,0xffff ); +pci_config_write16 (addr,0xffff ); ret =IRQ_HANDLED ; }return ret;
PATCH 63/71 sparc64: Fix disappearing PCI devices on e3500.
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: David S. Miller <[email protected]>
[ Upstream commit 7ee766d8fba9dfd93bf3eca7a8d84a25404a68dc ]
Based upon a bug report by Meelis Roos.
The OF device layer builds properties by matching bus types and applying 'range' properties as appropriate, up to the root.
The match for "PCI" busses is looking at the 'device_type' property, and this does work %99 of the time.
But on an E3500 system with a PCI QFE card, the DEC 21153 bridge sitting above the QFE network interface devices has a 'name' of "pci", but it completely lacks a 'device_type' property. So we don't match it as a PCI bus, and subsequently we end up with no resource values at all for the devices sitting under that DEC bridge.
--- arch/sparc64/kernel/of_device.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-)
arch/sparc64/kernel/of_device.c +4 -5
@@ -170,7 +170,7 @@ static unsigned int of_bus_default_get_fstatic int of_bus_pci_match (struct device_node *np) { -if (!strcmp (np->type,"pci" ) || !strcmp (np->type,"pciex" )) { +if (!strcmp (np->name,"pci" )) {const char *model =of_get_property (np,"model" ,NULL );if (model && !strcmp (model,"SUNW,simba" ))
@@ -201,7 +201,7 @@ static int of_bus_simba_match(struct dev/* Treat PCI busses lacking ranges property just like * simba. */ -if (!strcmp (np->type,"pci" ) || !strcmp (np->type,"pciex" )) { +if (!strcmp (np->name,"pci" )) {if (!of_find_property (np,"ranges" ,NULL ))return 1 ; }
@@ -426,7 +426,7 @@ static int __init use_1to1_mapping(struc* it lacks a ranges property, and this will include * cases like Simba. */ -if (!strcmp (pp->type,"pci" ) || !strcmp (pp->type,"pciex" )) +if (!strcmp (pp->name,"pci" ))return 0 ;return 1 ;
@@ -709,8 +709,7 @@ static unsigned int __init build_one_devbreak ; } }else { -if (!strcmp (pp->type,"pci" ) || - !strcmp (pp->type,"pciex" )) { +if (!strcmp (pp->name,"pci" )) {unsigned int this_orig_irq = irq; irq =pci_irq_swizzle (dp, pp, irq);
PATCH 64/71 sparc64: Fix missing devices due to PCI bridge test in of_create_pci_dev().
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: David S. Miller <[email protected]>
[ Upstream commit 44b50e5a1af13c605d6c3b17a60e42eb0ee48d5f ]
Just like in the arch/sparc64/kernel/of_device.c code fix commit 071d7f4c3b411beae08d27656e958070c43b78b4 ("sparc64: Fix disappearing PCI devices on e3500.") we have to check the OF device node name for "pci" instead of relying upon the 'device_type' property being there on all PCI bridges.
Tested by Meelis Roos, and confirmed to make the PCI QFE devices reappear on the E3500 system.
--- arch/sparc64/kernel/pci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/sparc64/kernel/pci.c +1 -1
@@ -425,7 +425,7 @@ struct pci_dev *of_create_pci_dev(struct dev->current_state =4 ;/* unknown power state */ dev->error_state = pci_channel_io_normal; -if (!strcmp (type,"pci" ) || !strcmp (type,"pciex" )) { +if (!strcmp (node->name,"pci" )) {/* a PCI-PCI bridge */ dev->hdr_type =PCI_HEADER_TYPE_BRIDGE ; dev->rom_base_reg =PCI_ROM_ADDRESS1 ;
PATCH 65/71 braille_console: only register notifiers when the braille console is used
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Pascal Terjan <[email protected]>
commit c0c9209ddd96bc4f1d70a8b9958710671e076080 upstream
Only register the braille driver VT and keyboard notifiers when the braille console is used. Avoids eating insert or backspace keys.
Addresses http://bugzilla.kernel.org/show_bug.cgi?id=11242
--- drivers/accessibility/braille/braille_console.c | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-)
drivers/accessibility/braille/braille_console.c +4 -9
@@ -376,6 +376,8 @@ int braille_register_console(struct cons console->flags |=CON_ENABLED ; console->index = index; braille_co = console; +register_keyboard_notifier (&keyboard_notifier_block); +register_vt_notifier (&vt_notifier_block);return 0 ; }
@@ -383,15 +385,8 @@ int braille_unregister_console(struct co {if (braille_co != console)return -EINVAL ; +unregister_keyboard_notifier (&keyboard_notifier_block); +unregister_vt_notifier (&vt_notifier_block); braille_co =NULL ;return 0 ; } - -static int __init braille_init (void ) -{ -register_keyboard_notifier (&keyboard_notifier_block); -register_vt_notifier (&vt_notifier_block); -return 0 ; -} - -console_initcall (braille_init);
PATCH 66/71 ALSA: snd-powermac: mixers for PowerMac G4 AGP
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Risto Suominen <[email protected]>
commit 4dbf95ba6c344186ec6d38ff514dc675da464bec upstream
Add mixer controls for PowerMac G4 AGP (Screamer).
This patch fixes the regression in the recent snd-powermac which doesn't support some G3/G4 PowerMacs:
http://lkml.org/lkml/2008/10/1/220
--- sound/ppc/awacs.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-)
sound/ppc/awacs.c +16 -3
@@ -621,6 +621,13 @@ static struct snd_kcontrol_new snd_pmac_ AWACS_SWITCH("CD Capture Switch", 0, SHIFT_MUX_CD, 0), }; +static struct snd_kcontrol_new snd_pmac_screamer_mixers_g4agp[]__initdata = { +AWACS_VOLUME ("Line out Playback Volume" ,2 ,6 ,1 ), +AWACS_VOLUME ("Master Playback Volume" ,5 ,6 ,1 ), +AWACS_SWITCH ("CD Capture Switch" ,0 ,SHIFT_MUX_CD ,0 ), +AWACS_SWITCH ("Line Capture Switch" ,0 ,SHIFT_MUX_MIC ,0 ), +}; +static struct snd_kcontrol_new snd_pmac_awacs_mixers_pmac7500[]__initdata = {AWACS_VOLUME ("Line out Playback Volume" ,2 ,6 ,1 ),AWACS_SWITCH ("CD Capture Switch" ,0 ,SHIFT_MUX_CD ,0 ),
@@ -768,6 +775,7 @@ static void snd_pmac_awacs_resume(struct#define IS_IMAC (machine_is_compatible("PowerMac2,1") \ || machine_is_compatible("PowerMac2,2") \ || machine_is_compatible("PowerMac4,1")) +#define IS_G4AGP (machine_is_compatible("PowerMac3,1"))static int imac;
@@ -850,6 +858,7 @@ snd_pmac_awacs_init(struct snd_pmac *chi {int pm7500 =IS_PM7500 ;int beige =IS_BEIGE ; +int g4agp =IS_G4AGP ;int err, vol; imac =IS_IMAC ;
@@ -939,7 +948,7 @@ snd_pmac_awacs_init(struct snd_pmac *chi snd_pmac_awacs_mixers);if (err <0 )return err; -if (beige) +if (beige || g4agp) ;else if (chip->model ==PMAC_SCREAMER ) err = build_mixers(chip, ARRAY_SIZE(snd_pmac_screamer_mixers2),
@@ -961,13 +970,17 @@ snd_pmac_awacs_init(struct snd_pmac *chi err =build_mixers (chip,ARRAY_SIZE (snd_pmac_screamer_mixers_imac), snd_pmac_screamer_mixers_imac); + else if (g4agp) + err =build_mixers (chip, +ARRAY_SIZE (snd_pmac_screamer_mixers_g4agp), + snd_pmac_screamer_mixers_g4agp); else err =build_mixers (chip,ARRAY_SIZE (snd_pmac_awacs_mixers_pmac), snd_pmac_awacs_mixers_pmac);if (err <0 )return err; - chip->master_sw_ctl =snd_ctl_new1 ((pm7500 || imac) + chip->master_sw_ctl =snd_ctl_new1 ((pm7500 || imac || g4agp) ? &snd_pmac_awacs_master_sw_imac : &snd_pmac_awacs_master_sw, chip); err =snd_ctl_add (chip->card, chip->master_sw_ctl);
@@ -1012,7 +1025,7 @@ snd_pmac_awacs_init(struct snd_pmac *chireturn err; } -if (beige) +if (beige || g4agp) err =build_mixers (chip,ARRAY_SIZE (snd_pmac_screamer_mic_boost_beige), snd_pmac_screamer_mic_boost_beige);
PATCH 67/71 ALSA: snd-powermac: HP detection for 1st iMac G3 SL
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Risto Suominen <[email protected]>
commit 030b655b062fe5190fc490e0091ea50307d7a86f upstream
Correct headphone detection for 1st generation iMac G3 Slot-loading (Screamer).
This patch fixes the regression in the recent snd-powermac which doesn't support some G3/G4 PowerMacs:
http://lkml.org/lkml/2008/10/1/220
--- sound/ppc/awacs.c | 31 ++++++++++++++++++++++--------- 1 file changed, 22 insertions(+), 9 deletions(-)
sound/ppc/awacs.c +22 -9
@@ -695,7 +695,10 @@ static struct snd_kcontrol_new snd_pmac_static struct snd_kcontrol_new snd_pmac_awacs_speaker_sw__initdata =AWACS_SWITCH ("PC Speaker Playback Switch" ,1 ,SHIFT_SPKMUTE ,1 ); -static struct snd_kcontrol_new snd_pmac_awacs_speaker_sw_imac__initdata = +static struct snd_kcontrol_new snd_pmac_awacs_speaker_sw_imac1__initdata = +AWACS_SWITCH ("PC Speaker Playback Switch" ,1 ,SHIFT_PAROUT1 ,1 ); + +static struct snd_kcontrol_new snd_pmac_awacs_speaker_sw_imac2__initdata =AWACS_SWITCH ("PC Speaker Playback Switch" ,1 ,SHIFT_PAROUT1 ,0 );
@@ -772,12 +775,12 @@ static void snd_pmac_awacs_resume(struct#define IS_PM7500 (machine_is_compatible("AAPL,7500"))#define IS_BEIGE (machine_is_compatible("AAPL,Gossamer")) -#define IS_IMAC (machine_is_compatible("PowerMac2,1") \ - || machine_is_compatible("PowerMac2,2") \ +#define IS_IMAC1 (machine_is_compatible("PowerMac2,1")) +#define IS_IMAC2 (machine_is_compatible("PowerMac2,2") \ || machine_is_compatible("PowerMac4,1"))#define IS_G4AGP (machine_is_compatible("PowerMac3,1")) -static int imac; +static int imac1, imac2;#ifdef PMAC_SUPPORT_AUTOMUTE /*
@@ -823,13 +826,18 @@ static void snd_pmac_awacs_update_automu {int reg = chip->awacs_reg[1 ] | (MASK_HDMUTE |MASK_SPKMUTE ); -if (imac) { +if (imac1) { + reg &= ~MASK_SPKMUTE ; + reg |=MASK_PAROUT1 ; + }else if (imac2) { reg &= ~MASK_SPKMUTE ; reg &= ~MASK_PAROUT1 ; }if (snd_pmac_awacs_detect_headphone (chip)) reg &= ~MASK_HDMUTE ; -else if (imac) +else if (imac1) + reg &= ~MASK_PAROUT1 ; +else if (imac2) reg |=MASK_PAROUT1 ;else reg &= ~MASK_SPKMUTE ;
@@ -859,9 +867,12 @@ snd_pmac_awacs_init(struct snd_pmac *chiint pm7500 =IS_PM7500 ;int beige =IS_BEIGE ;int g4agp =IS_G4AGP ; +int imac;int err, vol; - imac =IS_IMAC ; + imac1 =IS_IMAC1 ; + imac2 =IS_IMAC2 ; + imac = imac1 || imac2;/* looks like MASK_GAINLINE triggers something, so we set here * as start-up */
@@ -1017,8 +1028,10 @@ snd_pmac_awacs_init(struct snd_pmac *chi snd_pmac_awacs_speaker_vol);if (err <0 )return err; - chip->speaker_sw_ctl =snd_ctl_new1 (imac - ? &snd_pmac_awacs_speaker_sw_imac + chip->speaker_sw_ctl =snd_ctl_new1 (imac1 + ? &snd_pmac_awacs_speaker_sw_imac1 + : imac2 + ? &snd_pmac_awacs_speaker_sw_imac2 : &snd_pmac_awacs_speaker_sw, chip); err =snd_ctl_add (chip->card, chip->speaker_sw_ctl);if (err <0 )
PATCH 68/71 fbcon: fix monochrome color value calculation
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: David Winn <[email protected]>
commit 08650869e0ec581f8d88cfdb563d37f5383abfe2 upstream
Commit 22af89aa0c0b4012a7431114a340efd3665a7617 ("fbcon: replace mono_col macro with static inline") changed the order of operations for computing monochrome color values. This generates 0xffff000f instead of 0x0000000f for a 4 bit monochrome color, leading to image corruption if it is passed to cfb_imageblit or other similar functions. Fix it up.
--- drivers/video/console/fbcon.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/video/console/fbcon.h +1 -1
@@ -110,7 +110,7 @@ static inline int mono_col(const struct__u32 max_len; max_len =max (info->var.green.length, info->var.red.length); max_len =max (info->var.blue.length, max_len); -return ~(0xfff << (max_len &0xff )); +return (~(0xfff << max_len)) &0xff ; } static inline int attr_col_ec(int shift, struct vc_data *vc,
PATCH 69/71 rtc: fix kernel panic on second use of SIGIO nofitication
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Marcin Slusarz <[email protected]>
commit 2e4a75cdcb89ff53bb182dda3a6dcdc14befe007 upstream
When userspace uses SIGIO notification and forgets to disable it before closing file descriptor, rtc->async_queue contains stale pointer to struct file. When user space enables again SIGIO notification in different process, kernel dereferences this (poisoned) pointer and crashes.
So disable SIGIO notification on close.
Kernel panic:
(second run of qemu (requires echo 1024 > /sys/class/rtc/rtc0/max_user_freq))
general protection fault: 0000 [1] PREEMPT CPU 0 Modules linked in: af_packet snd_pcm_oss snd_mixer_oss snd_seq_oss snd_seq_midi_event snd_seq usbhid tuner tea5767 tda8290 tuner_xc2028 xc5000 tda9887 tuner_simple tuner_types mt20xx tea5761 tda9875 uhci_hcd ehci_hcd usbcore bttv snd_via82xx snd_ac97_codec ac97_bus snd_pcm snd_timer ir_common compat_ioctl32 snd_page_alloc videodev v4l1_compat snd_mpu401_uart snd_rawmidi v4l2_common videobuf_dma_sg videobuf_core snd_seq_device snd btcx_risc soundcore tveeprom i2c_viapro Pid: 5781, comm: qemu-system-x86 Not tainted 2.6.27-rc6 #363 RIP: 0010:[<ffffffff8024f891>] [<ffffffff8024f891>] __lock_acquire+0x3db/0x73f RSP: 0000:ffffffff80674cb8 EFLAGS: 00010002 RAX: ffff8800224c62f0 RBX: 0000000000000046 RCX: 0000000000000002 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8800224c62f0 RBP: ffffffff80674d08 R08: 0000000000000002 R09: 0000000000000001 R10: ffffffff80238941 R11: 0000000000000001 R12: 0000000000000000 R13: 6b6b6b6b6b6b6b6b R14: ffff88003a450080 R15: 0000000000000000 FS: 00007f98b69516f0(0000) GS:ffffffff80623200(0000) knlGS:00000000f7cc86d0 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000a87000 CR3: 0000000022598000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process qemu-system-x86 (pid: 5781, threadinfo ffff880028812000, task ffff88003a450080) Stack: ffffffff80674cf8 0000000180238440 0000000200000002 0000000000000000 ffff8800224c62f0 0000000000000046 0000000000000000 0000000000000002 0000000000000002 0000000000000000 ffffffff80674d68 ffffffff8024fc7a Call Trace: <IRQ> [<ffffffff8024fc7a>] lock_acquire+0x85/0xa9 [<ffffffff8029cb62>] ? send_sigio+0x2a/0x184 [<ffffffff80491d1f>] _read_lock+0x3e/0x4a [<ffffffff8029cb62>] ? send_sigio+0x2a/0x184 [<ffffffff8029cb62>] send_sigio+0x2a/0x184 [<ffffffff8024fb97>] ? __lock_acquire+0x6e1/0x73f [<ffffffff8029cd4d>] ? kill_fasync+0x2c/0x4e [<ffffffff8029cd10>] __kill_fasync+0x54/0x65 [<ffffffff8029cd5b>] kill_fasync+0x3a/0x4e [<ffffffff80402896>] rtc_update_irq+0x9c/0xa5 [<ffffffff80404640>] cmos_interrupt+0xae/0xc0 [<ffffffff8025d1c1>] handle_IRQ_event+0x25/0x5a [<ffffffff8025e5e4>] handle_edge_irq+0xdd/0x123 [<ffffffff8020da34>] do_IRQ+0xe4/0x144 [<ffffffff8020bad6>] ret_from_intr+0x0/0xf <EOI> [<ffffffff8026fdc2>] ? __alloc_pages_internal+0xe7/0x3ad [<ffffffff8033fe67>] ? clear_page_c+0x7/0x10 [<ffffffff8026fc10>] ? get_page_from_freelist+0x385/0x450 [<ffffffff8026fdc2>] ? __alloc_pages_internal+0xe7/0x3ad [<ffffffff80280aac>] ? anon_vma_prepare+0x2e/0xf6 [<ffffffff80279400>] ? handle_mm_fault+0x227/0x6a5 [<ffffffff80494716>] ? do_page_fault+0x494/0x83f [<ffffffff8049251d>] ? error_exit+0x0/0xa9 Code: cc 41 39 45 28 74 24 e8 5e 1d 0f 00 85 c0 0f 84 6a 03 00 00 83 3d 8f a9 aa 00 00 be 47 03 00 00 0f 84 6a 02 00 00 e9 53 03 00 00 <41> ff 85 38 01 00 00 45 8b be 90 06 00 00 41 83 ff 2f 76 24 e8 RIP [<ffffffff8024f891>] __lock_acquire+0x3db/0x73f RSP <ffffffff80674cb8> ---[ end trace 431877d860448760 ]--- Kernel panic - not syncing: Aiee, killing interrupt handler!
--- drivers/rtc/rtc-dev.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-)
drivers/rtc/rtc-dev.c +9 -6
@@ -401,6 +401,12 @@ static int rtc_dev_ioctl(struct inode *ireturn err; } +static int rtc_dev_fasync (int fd,struct file *file,int on) +{ +struct rtc_device *rtc = file->private_data; +return fasync_helper (fd, file, on, &rtc->async_queue); +} +static int rtc_dev_release (struct inode *inode,struct file *file) {struct rtc_device *rtc = file->private_data;
@@ -411,16 +417,13 @@ static int rtc_dev_release(struct inodeif (rtc->ops->release) rtc->ops->release (rtc->dev.parent); +if (file->f_flags &FASYNC ) +rtc_dev_fasync (-1 , file,0 ); +clear_bit_unlock (RTC_DEV_BUSY , &rtc->flags);return 0 ; } -static int rtc_dev_fasync (int fd,struct file *file,int on) -{ -struct rtc_device *rtc = file->private_data; -return fasync_helper (fd, file, on, &rtc->async_queue); -} -static const struct file_operations rtc_dev_fops = { .owner =THIS_MODULE , .llseek = no_llseek,
PATCH 70/71 mm owner: fix race between swapoff and exit
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Balbir Singh <[email protected]>
[Here's a backport of 2.6.27-rc8's 31a78f23bac0069004e69f98808b6988baccb6b6
to 2.6.26 or 2.6.26.5: I wouldn't trouble -stable for the (root only) swapoff case which uncovered the bug, but the /proc/<pid>/<mmstats> case is open to all, so I think worth plugging in the next 2.6.26-stable.
- Hugh]
There's a race between mm->owner assignment and swapoff, more easily seen when task slab poisoning is turned on. The condition occurs when try_to_unuse() runs in parallel with an exiting task. A similar race can occur with callers of get_task_mm(), such as /proc/<pid>/<mmstats> or ptrace or page migration.
CPU0 CPU1
try_to_unuse
looks at mm = task0->mm
increments mm->mm_userstask 0 exitsmm->owner needs to be updated, but no
new owner is found (mm_users > 1, but
no other task has task->mm = task0->mm)mm_update_next_owner() leaves
mmput(mm) decrements mm->mm_users
task0 freed
dereferencing mm->owner failsThe fix is to notify the subsystem via mm_owner_changed callback(), if no new owner is found, by specifying the new task as NULL.
Jiri Slaby:mm->owner was set to NULL prior to calling cgroup_mm_owner_callbacks(), but must be set after that, so as not to pass NULL as old owner causing oops.
Daisuke Nishimura:mm_update_next_owner() may set mm->owner to NULL, but mem_cgroup_from_task() and its callers need to take account of this situation to avoid oops.
Hugh Dickins:
Lockdep warning and hang below exec_mmap() when testing these patches. exit_mm() up_reads mmap_sem before calling mm_update_next_owner(), so exec_mmap() now needs to do the same. And with that repositioning, there's now no point in mm_need_new_owner() allowing for NULL mm.
--- fs/exec.c | 2 +- kernel/cgroup.c | 5 +++-- kernel/exit.c | 12 ++++++++++-- mm/memcontrol.c | 13 +++++++++++++ 4 files changed, 27 insertions(+), 5 deletions(-)
fs/exec.c +1 -1
@@ -740,11 +740,11 @@ static int exec_mmap(struct mm_struct *m tsk->active_mm = mm;activate_mm (active_mm, mm);task_unlock (tsk); -mm_update_next_owner (old_mm);arch_pick_mmap_layout (mm);if (old_mm) {up_read (&old_mm->mmap_sem);BUG_ON (active_mm != old_mm); +mm_update_next_owner (old_mm);mmput (old_mm);return 0 ; }
kernel/cgroup.c +3 -2
@@ -2761,14 +2761,15 @@ void cgroup_fork_callbacks(struct task_s*/ void cgroup_mm_owner_callbacks (struct task_struct *old,struct task_struct *new) { -struct cgroup *oldcgrp, *newcgrp; +struct cgroup *oldcgrp, *newcgrp =NULL ;if (need_mm_owner_callback) {int i;for (i =0 ; i <CGROUP_SUBSYS_COUNT ; i++) {struct cgroup_subsys *ss = subsys[i]; oldcgrp =task_cgroup (old, ss->subsys_id); - newcgrp =task_cgroup (new, ss->subsys_id); +if (new) + newcgrp =task_cgroup (new, ss->subsys_id);if (oldcgrp == newcgrp)continue ;if (ss->mm_owner_changed)
kernel/exit.c +10 -2
@@ -577,8 +577,6 @@ mm_need_new_owner(struct mm_struct *mm,* If there are other users of the mm and the owner (us) is exiting * we need to find a new owner to take on the responsibility. */ -if (!mm) -return 0 ;if (atomic_read (&mm->mm_users) <=1 )return 0 ;if (mm->owner != p)
@@ -621,6 +619,16 @@ retry: }while_each_thread (g, c);read_unlock (&tasklist_lock); +/* +* We found no owner yet mm_users > 1: this implies that we are +* most likely racing with swapoff (try_to_unuse()) or /proc or +* ptrace or page migration (get_task_mm()). Mark owner as NULL, +* so that subsystems can understand the callback and take action. +*/ +down_write (&mm->mmap_sem); +cgroup_mm_owner_callbacks (mm->owner,NULL ); + mm->owner =NULL ; +up_write (&mm->mmap_sem);return ; assign_new_owner:
mm/memcontrol.c +13 -0
@@ -250,6 +250,14 @@ static struct mem_cgroup *mem_cgroup_frostruct mem_cgroup *mem_cgroup_from_task (struct task_struct *p) { +/* +* mm_update_next_owner() may clear mm->owner to NULL +* if it races with swapoff, page migration, etc. +* So this can be called with p == NULL. +*/ +if (unlikely (!p)) +return NULL ; +return container_of (task_subsys_state (p, mem_cgroup_subsys_id), struct mem_cgroup, css); }
@@ -574,6 +582,11 @@ retry:rcu_read_lock (); mem =mem_cgroup_from_task (rcu_dereference (mm->owner)); +if (unlikely (!mem)) { +rcu_read_unlock (); +kmem_cache_free (page_cgroup_cache, pc); +return 0 ; + }/* * For every charge from the cgroup, increment reference count */
PATCH 71/71 S390: CVE-2008-1514: prevent ptrace padding area read/write in 31-bit mode
In reply to Greg KH2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: Jarod Wilson <[email protected]>
commit 3d6e48f43340343d97839eadb1ab7b6a3ea98797 upstream
When running a 31-bit ptrace, on either an s390 or s390x kernel, reads and writes into a padding area in struct user_regs_struct32 will result in a kernel panic.
This is also known as CVE-2008-1514.
Test case available here:
http://sources.redhat.com/cgi-bin/cvsweb.cgi/~checkout~/tests/ptrace-tests/tests/user-area-padding.c?cvsroot=systemtap
Steps to reproduce:
1) wget the above
2) gcc -o user-area-padding-31bit user-area-padding.c -Wall -ggdb2 -D_GNU_SOURCE -m31
3) ./user-area-padding-31bit
<panic>
Test status
-----------
Without patch, both s390 and s390x kernels panic. With patch, the test case, as well as the gdb testsuite, pass without incident, padding area reads returning zero, writes ignored.
Nb: original version returned -EINVAL on write attempts, which broke the gdb test and made the test case slightly unhappy, Jan Kratochvil suggested the change to return 0 on write attempts.
--- arch/s390/kernel/compat_ptrace.h | 1 + arch/s390/kernel/ptrace.c | 28 ++++++++++++++++++++++++++++ 2 files changed, 29 insertions(+)
arch/s390/kernel/compat_ptrace.h +1 -0
@@ -42,6 +42,7 @@ struct user_regs_struct32u32 gprs[NUM_GPRS ];u32 acrs[NUM_ACRS ];u32 orig_gpr2; +/* nb: there's a 4-byte hole here */ s390_fp_regs fp_regs;/* * These per registers are in here so that gdb can modify them
arch/s390/kernel/ptrace.c +28 -0
@@ -177,6 +177,13 @@ peek_user(struct task_struct *child, add*/ tmp = (addr_t )task_pt_regs (child)->orig_gpr2; + }else if (addr < (addr_t) &dummy->regs.fp_regs) { +/* +* prevent reads of padding hole between +* orig_gpr2 and fp_regs on s390. +*/ + tmp =0 ; + }else if (addr < (addr_t) (&dummy->regs.fp_regs +1 )) {/* * floating point regs. are stored in the thread structure
@@ -268,6 +275,13 @@ poke_user(struct task_struct *child, add*/ task_pt_regs (child)->orig_gpr2 = data; + }else if (addr < (addr_t) &dummy->regs.fp_regs) { +/* +* prevent writes of padding hole between +* orig_gpr2 and fp_regs on s390. +*/ +return 0 ; + }else if (addr < (addr_t) (&dummy->regs.fp_regs +1 )) {/* * floating point regs. are stored in the thread structure
@@ -409,6 +423,13 @@ peek_user_emu31(struct task_struct *chil*/ tmp = *(__u32 *)((addr_t ) &task_pt_regs (child)->orig_gpr2 +4 ); + }else if (addr < (addr_t) &dummy32->regs.fp_regs) { +/* +* prevent reads of padding hole between +* orig_gpr2 and fp_regs on s390. +*/ + tmp =0 ; + }else if (addr < (addr_t) (&dummy32->regs.fp_regs +1 )) {/* * floating point regs. are stored in the thread structure
@@ -488,6 +509,13 @@ poke_user_emu31(struct task_struct *chil*/ *(__u32 *)((addr_t ) &task_pt_regs (child)->orig_gpr2 +4 ) = tmp; + }else if (addr < (addr_t) &dummy32->regs.fp_regs) { +/* +* prevent writess of padding hole between +* orig_gpr2 and fp_regs on s390. +*/ +return 0 ; + }else if (addr < (addr_t) (&dummy32->regs.fp_regs +1 )) {/* * floating point regs. are stored in the thread structure
Quoted 11 lines · Greg KH
This is the start of the stable review cycle for the 2.6.26.6 release. There are 71 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let us know. If anyone is a maintainer of the proper subsystem, and wants to add a Signed-off-by: line to the patch, please respond with it.
These patches are sent out with a number of different people on the Cc:
line. If you wish to be a reviewer, please email [email protected] to add your name to the list. If you want to be off the reviewer list, also email us.
Quoted 5 lines
Responses should be made by Wed Oct 8, 22:00:00 UTC. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
kernel.org/pub/linux/kernel/v2.6/stable-review/patch-2.6.26.8-rc1.gz
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Where'd you hide that file Greg? patch-2.6.25.18-rc1.gz is there but no sign of 2.6.26.6 patch
Grant.
Quoted 13 lines · Grant Coady
Quoted 11 lines · Greg KH
This is the start of the stable review cycle for the 2.6.26.6 release. There are 71 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let us know. If anyone is a maintainer of the proper subsystem, and wants to add a Signed-off-by: line to the patch, please respond with it.
These patches are sent out with a number of different people on the Cc:
line. If you wish to be a reviewer, please email [email protected] to add your name to the list. If you want to be off the reviewer list, also email us.
Quoted 8 lines
Quoted 5 lines
Responses should be made by Wed Oct 8, 22:00:00 UTC. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
kernel.org/pub/linux/kernel/v2.6/stable-review/patch-2.6.26.8-rc1.gz^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^Where'd you hide that file Greg? patch-2.6.25.18-rc1.gz is there but no sign of 2.6.26.6 patch
Oops, I copied the file up to the server, but forgot to move it into the proper place. It's patch-2.6.26.6-rc1.gz and should be there in a few minutes.
thanks,
greg k-h
Re: [patch 60/71] sparc64: Fix PCI error interrupt registry on PSYCHO.
In reply to Greg KHQuoted 9 lines · Greg KH
2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: David S. Miller <[email protected]>[ Upstream commit
80a56ab626c70468be92e74cf3d288ffaed23fdb]We need to pass
IRQF_SHARED, otherwise we get things like:
But you forgot to update the comment (see below)...
Quoted 35 lines
IRQ handler type mismatch for IRQ 33
current handler:PSYCHO_UECall Trace: [000000000048394c] request_irq+0xac/0x120 [00000000007c5f6c] psycho_scan_bus+0x98/0x158 [00000000007c2bc0] pcibios_init+0xdc/0x12c [0000000000426a5c] do_one_initcall+0x1c/0x160 [00000000007c0180] kernel_init+0x9c/0xfc [0000000000427050] kernel_thread+0x30/0x60 [00000000006ae1d0] rest_init+0x10/0x60on e3500 and similar systems.
On a single board, the UE interrupts of two Psycho nodes are funneled through the same interrupt, from of_debug=3 dump:
/pci@b,4000: direct translate 2ee --> 21
...
/pci@b,2000: direct translate 2ee --> 21Decimal "33" mentioned above is the hex "21" mentioned here.
Thanks to Meelis Roos for dumps and testing.
Signed-off-by David S. Miller <[email protected]>Signed-off-by Greg Kroah-Hartman <[email protected]>--- arch/sparc64/kernel/pci_psycho.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
arch/sparc64/kernel/pci_psycho.c static void psycho_register_error_handle · line 744
Quoted 1 line
arch/sparc64/kernel/pci_psycho.c +0
-0@@ -744,16 +744,16 @@ static void psycho_register_error_handle* the second will just error out since we do not pass in
^^^^^^^^^^^^^^^^^^^^^^^
arch/sparc64/kernel/pci_psycho.c static void psycho_register_error_handle · line 745
Quoted 1 line
arch/sparc64/kernel/pci_psycho.c +0
-0* IRQF_SHARED.
^^^^^^^^^^^
Quoted 7 lines
arch/sparc64/kernel/pci_psycho.c +2
-2*/ - err =request_irq (op->irqs[1 ], psycho_ue_intr,0 , + err =request_irq (op->irqs[1 ], psycho_ue_intr,IRQF_SHARED ,"PSYCHO_UE" , pbm); - err =request_irq (op->irqs[2 ], psycho_ce_intr,0 , + err =request_irq (op->irqs[2 ], psycho_ce_intr,IRQF_SHARED ,"PSYCHO_CE" , pbm);
arch/sparc64/kernel/pci_psycho.c static void psycho_register_error_handle · line 759
Quoted 10 lines
arch/sparc64/kernel/pci_psycho.c +1
-1/* This one, however, ought not to fail. We can just warn * about it since the system can still operate properly even * if this fails. */ - err =request_irq (op->irqs[0 ], psycho_pcierr_intr,0 , + err =request_irq (op->irqs[0 ], psycho_pcierr_intr,IRQF_SHARED ,"PSYCHO_PCIERR" , pbm);if (err) printk(KERN_WARNING "%s: Could not register PCIERR, "
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
David Miller
maintainerRe: [patch 60/71] sparc64: Fix PCI error interrupt registry on PSYCHO.
From: Geert Uytterhoeven <[email protected]>
Date: Mon, 29 Dec 2008 18:14:31 +0100 (CET)
Quoted 12 lines · Greg KH
Quoted 9 lines
2.6.26-stable review patch. If anyone has any objections, please let us know.
------------------
From: David S. Miller <[email protected]>[ Upstream commit
80a56ab626c70468be92e74cf3d288ffaed23fdb]We need to pass
IRQF_SHARED, otherwise we get things like:But you forgot to update the comment (see below)...
...
Quoted 7 lines
arch/sparc64/kernel/pci_psycho.c static void psycho_register_error_handle · line 744
Quoted 4 lines
arch/sparc64/kernel/pci_psycho.c +0
-0@@ -744,16 +744,16 @@ static void psycho_register_error_handle* the second will just error out since we do not pass in ^^^^^^^^^^^^^^^^^^^^^^^arch/sparc64/kernel/pci_psycho.c static void psycho_register_error_handle · line 745
Quoted 1 line
arch/sparc64/kernel/pci_psycho.c +0
-0* IRQF_SHARED. ^^^^^^^^^^^
Thanks a lot Geert, I'll fix this up.