Skip to contentSkip to conversation

mpc83xx: add support for switching between USB Host/Function for MPC837XEMDS

PATCH Superseded Anton Vorontsov 2 participants 3 messages Oct 14, 2008 – Oct 15, 2008

lore
Share & tools
lore

Anton Vorontsov

author
#0 lore raw

PATCH 1/1 mpc83xx: add support for switching between USB Host/Function for MPC837XEMDS

With this patch u-boot can fixup the dr_mode and phy_type properties for the Dual-Role USB controller.

Signed-off-by Anton Vorontsov <[email protected]>
---
 board/freescale/mpc837xemds/mpc837xemds.c |    1 +
 include/configs/MPC837XEMDS.h             |    2 ++
 2 files changed, 3 insertions(+), 0 deletions(-)
board/freescale/mpc837xemds/mpc837xemds.c +1 -0
index 8bc54d1..094d0c0 100644
@@ -314,6 +314,7 @@ void ft_board_setup(void *blob, bd_t *bd)
 {
 	ft_cpu_setup(blob, bd);
 	ft_tsec_fixup(blob, bd);
+	fdt_fixup_dr_usb(blob, bd);
 #ifdef CONFIG_PCI
 	ft_pci_setup(blob, bd);
 	if (board_pci_host_broken())
include/configs/MPC837XEMDS.h +2 -0
index d78aa60..6e4a65c 100644
@@ -360,6 +360,8 @@ extern int board_pci_host_broken(void);
 #define CONFIG_83XX_GENERIC_PCI	1 /* Use generic PCI setup */
 #define CONFIG_PQ_MDS_PIB	1 /* PQ MDS Platform IO Board */
 
+#define CONFIG_HAS_FSL_DR_USB	1 /* fixup device tree for the DR USB */
+
 #define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP		/* do pci plug-and-play */
Signature · 1 line
1.5.6.3
author
#1 lore raw

PATCH v2 1/1 mpc83xx: add support for switching between USB Host/Function for MPC837XEMDS

With this patch u-boot can fixup the dr_mode and phy_type properties for the Dual-Role USB controller.

While at it, also remove #ifdefs around includes, they are not needed.

Signed-off-by Anton Vorontsov <[email protected]>

---

v2:
- Added fdt_support.h include.

 board/freescale/mpc837xemds/mpc837xemds.c |    6 ++----
 include/configs/MPC837XEMDS.h             |    2 ++
 2 files changed, 4 insertions(+), 4 deletions(-)
board/freescale/mpc837xemds/mpc837xemds.c +2 -4
index 8bc54d1..72601b9 100644
@@ -16,12 +16,9 @@
 #include <asm/fsl_serdes.h>
 #include <spd_sdram.h>
 #include <tsec.h>
-#if defined(CONFIG_OF_LIBFDT)
 #include <libfdt.h>
-#endif
-#if defined(CONFIG_PQ_MDS_PIB)
+#include <fdt_support.h>
 #include "../common/pq-mds-pib.h"
-#endif
 
 int board_early_init_f(void)
 {

@@ -314,6 +311,7 @@ void ft_board_setup(void *blob, bd_t *bd)
 {
 	ft_cpu_setup(blob, bd);
 	ft_tsec_fixup(blob, bd);
+	fdt_fixup_dr_usb(blob, bd);
 #ifdef CONFIG_PCI
 	ft_pci_setup(blob, bd);
 	if (board_pci_host_broken())
include/configs/MPC837XEMDS.h +2 -0
index d78aa60..6e4a65c 100644
@@ -360,6 +360,8 @@ extern int board_pci_host_broken(void);
 #define CONFIG_83XX_GENERIC_PCI	1 /* Use generic PCI setup */
 #define CONFIG_PQ_MDS_PIB	1 /* PQ MDS Platform IO Board */
 
+#define CONFIG_HAS_FSL_DR_USB	1 /* fixup device tree for the DR USB */
+
 #define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP		/* do pci plug-and-play */
Signature · 1 line
1.5.6.3
Applied
#2 lore raw

PATCH v2 1/1 mpc83xx: add support for switching between USB Host/Function for MPC837XEMDS

Quoted 7 lines · On Tue, 14 Oct 2008 22:58:53 +0400 Anton Vorontsov <[email protected]>…

With this patch u-boot can fixup the dr_mode and phy_type properties for the Dual-Role USB controller.

While at it, also remove #ifdefs around includes, they are not needed.

Signed-off-by Anton Vorontsov <[email protected]>

---

applied to mpc83xx/next.

Thanks,

Kim