Suspend failure on NForce4-based boards due to chanes in stop_machine
Hi,
Current mainline (.28-rc3 at the moment) fails to suspend on at least some machines with dual-core AMD CPUs and NForce4-based mainboards. The affected boxes just hang solid during suspend/hibernation, after suspending devices, probably while the non-boot CPUs are being stopped (I'm able to reproduce this on two different machines).
Although this is not reproducible 100% of the time, it is reproducible enough to allow me to carry out bisection, which turned up the following commit as the source of the problem:
commit c9583e55fa2b08a230c549bd1e3c0bde6c50d9cc
Author: Heiko Carstens <[email protected]> Date: Mon Oct 13 23:50:10 2008 +0200
stop_machine: use workqueues instead of kernel threads
Convert stop_machine to a workqueue based approach. Instead of using kernel threads for stop_machine we now use a an rt workqueue to synchronize all cpus.
This has the advantage that all needed per cpu threads are already created when stop_machine gets called. And therefore a call to stop_machine won't fail anymore. This is needed for s390 which needs a mechanism to synchronize all cpus without allocating any memory.
As Rusty pointed out free_module() needs a non-failing stop_machine interface as well.
As a side effect the stop_machine code gets simplified.
With this commit reverted, suspend/hibernation works on the affected machines without any problems.
Thanks,
Rafael