add support for TD3116 board
PATCH 1/1 add support for TD3116 board
The following patch adds support for the Tongwei Video Technology TD-3116 board. This is a Bt878 based capture card with 16 inputs meant for surveilance applications. It also offers a way to check which inputs have a video signal while capturing another input. In addition there are a number of alarm inputs and outputs available and there is microcontroller which is presumably intended for use as a system watchdog. None of these extra capabilities are supported by the patch.
--- drivers/media/video/bt8xx/bttv-cards.c | 54 +++++++++++++++++++++++++++++++- drivers/media/video/bt8xx/bttv.h | 1 + 2 files changed, 54 insertions(+), 1 deletions(-)
drivers/media/video/bt8xx/bttv-cards.c +53 -1
@@ -74,6 +74,8 @@ static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input);static void geovision_muxsel (struct bttv *btv,unsigned int input); +static void td3116_muxsel (struct bttv *btv,unsigned int input); +static int terratec_active_radio_upgrade (struct bttv *btv);static int tea5757_read (struct bttv *btv);static int tea5757_write (struct bttv *btv,int value);
@@ -306,6 +308,7 @@ static struct CARD { { 0xd200dbc0, BTTV_BOARD_DVICO_FUSIONHDTV_2, "DViCO FusionHDTV 2" }, { 0x763c008a, BTTV_BOARD_GEOVISION_GV600, "GeoVision GV-600" }, { 0x18011000, BTTV_BOARD_ENLTV_FM_2, "Encore ENL TV-FM-2" }, + { 0x3116f200, BTTV_BOARD_TVT_TD3116, "Tongwei Video Technology TD-3116" }, { 0, -1, NULL } };
@@ -3061,7 +3064,20 @@ struct tvcard bttv_tvcards[] = { .pll = PLL_28, .has_radio = 1, .has_remote = 1, - } + }, + [BTTV_BOARD_TVT_TD3116] = { + .name = "Tongwei Video Technology TD-3116", + .video_inputs = 16, + .audio_inputs = 0, + .gpiomask = 0xc00ff, + .muxsel = { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, }, + .muxsel_hook = td3116_muxsel, + .tuner = UNSET, + .svhs = UNSET, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, };static const unsigned int bttv_num_tvcards =ARRAY_SIZE (bttv_tvcards);
@@ -3418,6 +3434,42 @@ static void geovision_muxsel(struct bttv *btv, unsigned int input)gpio_bits (0xf , inmux); } +/* +* The TD3116 has 2 74HC4051 muxes wired to the MUX0 input of a bt878. +* The first 74HC4051 has the lower 8 inputs, the second one the higher 8. +* The muxes are controlled via a 74HC373 latch which is connected to +* GPIOs 0-7. GPIO 18 is connected to the LE signal of the latch. +* Q0 of the latch is connected to the Enable (~E) input of the first +* 74HC4051. Q1 - Q3 are connected to S0 - S2 of the same 74HC4051. +* Q4 - Q7 are connected to the second 74HC4051 in the same way. +*/ + +static void td3116_latch_value (struct bttv *btv,u32 value) +{ +gpio_bits ( (1 <<18 ) |0xff , value); +gpio_bits ( (1 <<18 ) |0xff , (1 <<18 ) | value); +udelay (1 ); +gpio_bits ( (1 <<18 ) |0xff , value); +} + +static void td3116_muxsel (struct bttv *btv,unsigned int input) +{ +u32 value; +u32 highbit; + + highbit = (input &0x8 ) >>3 ; + +/* Disable outputs and set value in the mux */ + value =0x11 ;/* Disable outputs */ + value |= ((input &0x7 ) <<1 ) << (4 * highbit); +td3116_latch_value (btv, value); + +/* Enable the correct output */ + value &= ~0x11 ; + value |= ((highbit ^0x1 ) <<4 ) | highbit; +td3116_latch_value (btv, value); +} +/* ----------------------------------------------------------------------- */ static void bttv_reset_audio (struct bttv *btv)
drivers/media/video/bt8xx/bttv.h +1 -0
@@ -177,6 +177,7 @@#define BTTV_BOARD_GEOVISION_GV600 0x96#define BTTV_BOARD_KOZUMI_KTV_01C 0x97#define BTTV_BOARD_ENLTV_FM_2 0x98 +#define BTTV_BOARD_TVT_TD3116 0x99/* more card-specific defines */ #define PT2254_L_CHANNEL 0x10
Signature · 6 lines
1.5.6.5 -- video4linux-list mailing list Unsubscribe mailto:[email protected]?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list