nForce 790i/MCP55: sata-nv or ahci ?
Hi all...
I have read that modern nVidia SATA's are AHCI. But several distros I have tried use the sata-nv module for that chipset controller (MCP55). Is this correct or should I use standard ahci ? Anyways, it looks that the kernel/modprobe settings use this, can I change it via kernel cmdline or modprobe.conf, and force the system to try ahci module ?
By BIOS has no kind of setting to put the controlled in AHCI vs SATA mode... Playing with alias pci:v000010DEd0000037Fsv*sd*bc*sc*i* ?
wargo:~> lspci -s 00:0e
00:0e.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:0e.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:0e.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) wargo:~> lspci -ns 00:0e
00:0e.0 0101: 10de:037f (rev a3)
00:0e.1 0101: 10de:037f (rev a3)
00:0e.2 0101: 10de:037f (rev a3)
TIA
Signature · 4 lines
J.A. Magallon <jamagallon()ono!com> \ Software is like sex:
\ It's better when it's free
Mandriva Linux release 2009.1 (Cooker) for x86_64
Linux 2.6.27.5-desktop-1mnb (gcc 4.3.2 (GCC) #1 Sun NovQuoted 4 lines · J.A. Magallón
wargo:~> lspci -s 00:0e
00:0e.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:0e.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:0e.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3)
Your hardware doesn't claim to be an AHCI device, so the sata_nv driver is probably correct.
Signature · 1 line
Matthew Garrett | [email protected]
Quoted 4 lines · J.A. Magallón
Hi all...
I have read that modern nVidia SATA's are AHCI. But several distros I have tried use the sata-nv module for that chipset controller (MCP55).
Only ones more modern than that (MCP65 and later) are AHCI, MCP55 still uses sata_nv.
Quoted 17 lines
Is this correct or should I use standard ahci ? Anyways, it looks that the kernel/modprobe settings use this, can I change it via kernel cmdline or modprobe.conf, and force the system to try ahci module ?
By BIOS has no kind of setting to put the controlled in AHCI vs SATA mode... Playing with alias pci:v000010DEd0000037Fsv*sd*bc*sc*i* ?wargo:~> lspci -s 00:0e
00:0e.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:0e.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:0e.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) wargo:~> lspci -ns 00:0e
00:0e.0 0101: 10de:037f (rev a3)
00:0e.1 0101: 10de:037f (rev a3)
00:0e.2 0101: 10de:037f (rev a3)TIA