ucc_geth: Fix endless loop in stop_{tx,rx} routines
Subsystems (2)
PATCH 1/6 ucc_geth: Fix endless loop in stop_{tx,rx} routines
Currently the routines wait for the various bits w/o an assumption that bits may never get set. When timeouts happen I see that these bits never get set and so the routines hang the kernel.
With this patch we'll wait the graceful stop for 100 ms, and then will simply exit. There is nothing* we can do about that, but it's OK since we'll do full reset later.
* Well, actually, there is also not-graceful variant for the TX stop, but specs says that we never should use it.
Signed-off-by Anton Vorontsov <[email protected]>
--- drivers/net/ucc_geth.c | 9 ++++++--- 1 files changed, 6 insertions(+), 3 deletions(-)
drivers/net/ucc_geth.c +6 -3
@@ -1647,6 +1647,7 @@ static int ugeth_graceful_stop_tx(struct ucc_geth_private *ugeth)struct ucc_fast_private *uccf;u32 cecr_subblock;u32 temp; +int i =10 ; uccf = ugeth->uccf;
@@ -1664,8 +1665,9 @@ static int ugeth_graceful_stop_tx(struct ucc_geth_private *ugeth)/* Wait for command to complete */ do { +msleep (10 ); temp =in_be32 (uccf->p_ucce); - }while (!(temp &UCCE_GRA )); + }while (!(temp &UCCE_GRA ) && --i); uccf->stopped_tx =1 ;
@@ -1677,6 +1679,7 @@ static int ugeth_graceful_stop_rx(struct ucc_geth_private * ugeth)struct ucc_fast_private *uccf;u32 cecr_subblock;u8 temp; +int i =10 ; uccf = ugeth->uccf;
@@ -1694,9 +1697,9 @@ static int ugeth_graceful_stop_rx(struct ucc_geth_private * ugeth) ucc_num);qe_issue_cmd (QE_GRACEFUL_STOP_RX , cecr_subblock,QE_CR_PROTOCOL_ETHERNET ,0 ); - +msleep (10 ); temp =in_8 (&ugeth->p_rx_glbl_pram->rxgstpack); - }while (!(temp &GRACEFUL_STOP_ACKNOWLEDGE_RX )); + }while (!(temp &GRACEFUL_STOP_ACKNOWLEDGE_RX ) && --i); uccf->stopped_rx =1 ;
Signature · 1 line
1.5.6.5