mpt fusion: Update MPI Headers to version 01.05.19
Subsystems (2)
PATCH 1/5 mpt fusion: Update MPI Headers to version 01.05.19
This Patch is submitted to increment the MPI headers used by LSI MPT fusion drivers to the latest version 01.05.19.
Year is changed in CopyRight.
---
Signed-off-by Kashyap Desai <[email protected]>
---
drivers/message/fusion/lsi/mpi.h +5 -2
@@ -6,7 +6,7 @@* Title: MPI Message independent structures and definitions * Creation Date: July 27, 2000 * -* mpi.h Version: 01.05.13 +* mpi.h Version: 01.05.16 * * Version History * ---------------
@@ -79,6 +79,9 @@* 03-27-06 01.05.11 Bumped MPI_HEADER_VERSION_UNIT. * 10-11-06 01.05.12 Bumped MPI_HEADER_VERSION_UNIT. * 05-24-07 01.05.13 Bumped MPI_HEADER_VERSION_UNIT. +* 08-07-07 01.05.14 Bumped MPI_HEADER_VERSION_UNIT. +* 01-15-08 01.05.15 Bumped MPI_HEADER_VERSION_UNIT. +* 03-28-08 01.05.16 Bumped MPI_HEADER_VERSION_UNIT. * -------------------------------------------------------------------------- */
@@ -109,7 +112,7 @@/* Note: The major versions of 0xe0 through 0xff are reserved */ /* versioning for this MPI header set */ -#define MPI_HEADER_VERSION_UNIT (0x10) +#define MPI_HEADER_VERSION_UNIT (0x13)#define MPI_HEADER_VERSION_DEV (0x00)#define MPI_HEADER_VERSION_UNIT_MASK (0xFF00)#define MPI_HEADER_VERSION_UNIT_SHIFT (8)
drivers/message/fusion/lsi/mpi_cnfg.h +45 -2
95 lines not on this page · raw message
drivers/message/fusion/lsi/mpi_fc.h +1 -1
@@ -1,5 +1,5 @@/* -* Copyright (c) 2000-2004 LSI Corporation. +* Copyright (c) 2000-2008 LSI Corporation. * * * Name: mpi_fc.h
drivers/message/fusion/lsi/mpi_history.txt +60 -26
159 lines not on this page · raw message
drivers/message/fusion/lsi/mpi_init.h +1 -1
@@ -1,5 +1,5 @@/* -* Copyright (c) 2000-2007 LSI Corporation. +* Copyright (c) 2000-2008 LSI Corporation. * * * Name: mpi_init.h
drivers/message/fusion/lsi/mpi_ioc.h +20 -2
@@ -1,12 +1,12 @@/* -* Copyright (c) 2000-2007 LSI Corporation. +* Copyright (c) 2000-2008 LSI Corporation. * * * Name: mpi_ioc.h * Title: MPI IOC, Port, Event, FW Download, and FW Upload messages * Creation Date: August 11, 2000 * -* mpi_ioc.h Version: 01.05.14 +* mpi_ioc.h Version: 01.05.16 * * Version History * ---------------
@@ -113,6 +113,16 @@* added _MULTI_PORT_DOMAIN. * 05-24-07 01.05.14 Added Common Boot Block type to FWDownload Request. * Added Common Boot Block type to FWUpload Request. +* 08-07-07 01.05.15 Added MPI_EVENT_SAS_INIT_RC_REMOVED define. +* Added MPI_EVENT_IR2_RC_DUAL_PORT_ADDED and +* MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED for IR2 event data. +* Added SASAddress field to SAS Initiator Device Table +* Overflow event data structure. +* 03-28-08 01.05.16 Added two new ReasonCode values to SAS Device Status +* Change Event data to indicate completion of internally +* generated task management. +* Added MPI_EVENT_DSCVRY_ERR_DS_SATA_INIT_FAILURE define. +* Added MPI_EVENT_SAS_INIT_RC_INACCESSIBLE define. * -------------------------------------------------------------------------- */
@@ -612,6 +622,8 @@ typedef struct _EVENT_DATA_SAS_DEVICE_STATUS_CHANGE#define MPI_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL (0x0B)#define MPI_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL (0x0C)#define MPI_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION (0x0D) +#define MPI_EVENT_SAS_DEV_STAT_RC_CMPL_INTERNAL_DEV_RESET (0x0E) +#define MPI_EVENT_SAS_DEV_STAT_RC_CMPL_TASK_ABORT_INTERNAL (0x0F)/* SCSI Event data for Queue Full event */
@@ -708,6 +720,8 @@ typedef struct _MPI_EVENT_DATA_IR2#define MPI_EVENT_IR2_RC_PD_REMOVED (0x05)#define MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED (0x06)#define MPI_EVENT_IR2_RC_REBUILD_MEDIUM_ERROR (0x07) +#define MPI_EVENT_IR2_RC_DUAL_PORT_ADDED (0x08) +#define MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED (0x09)/* defines for logical disk states */ #define MPI_LD_STATE_OPTIMAL (0x00)
@@ -867,6 +881,7 @@ typedef struct _EVENT_DATA_DISCOVERY_ERROR#define MPI_EVENT_DSCVRY_ERR_DS_UNSUPPORTED_DEVICE (0x00000800)#define MPI_EVENT_DSCVRY_ERR_DS_MAX_SATA_TARGETS (0x00001000)#define MPI_EVENT_DSCVRY_ERR_DS_MULTI_PORT_DOMAIN (0x00002000) +#define MPI_EVENT_DSCVRY_ERR_DS_SATA_INIT_FAILURE (0x00004000)/* SAS SMP Error Event data */
@@ -902,6 +917,8 @@ typedef struct _EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE/* defines for the ReasonCode field of the SAS Initiator Device Status Change event */ #define MPI_EVENT_SAS_INIT_RC_ADDED (0x01) +#define MPI_EVENT_SAS_INIT_RC_REMOVED (0x02) +#define MPI_EVENT_SAS_INIT_RC_INACCESSIBLE (0x03)/* SAS Initiator Device Table Overflow Event data */
@@ -910,6 +927,7 @@ typedef struct _EVENT_DATA_SAS_INIT_TABLE_OVERFLOWU8 MaxInit;/* 00h */ U8 CurrentInit;/* 01h */ U16 Reserved1;/* 02h */ +U64 SASAddress;/* 04h */ }EVENT_DATA_SAS_INIT_TABLE_OVERFLOW , MPI_POINTER PTR_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW, MpiEventDataSasInitTableOverflow_t,
drivers/message/fusion/lsi/mpi_lan.h +1 -1
@@ -1,5 +1,5 @@/* -* Copyright (c) 2000-2004 LSI Corporation. +* Copyright (c) 2000-2008 LSI Corporation. * * * Name: mpi_lan.h
drivers/message/fusion/lsi/mpi_log_fc.h +1 -1
@@ -1,5 +1,5 @@/* -* Copyright (c) 2000-2001 LSI Corporation. All rights reserved. +* Copyright (c) 2000-2008 LSI Corporation. All rights reserved. * * NAME: fc_log.h * SUMMARY: MPI IocLogInfo definitions for the SYMFC9xx chips
drivers/message/fusion/lsi/mpi_log_sas.h +31 -6
@@ -1,6 +1,6 @@/*************************************************************************** * * -* Copyright 2003 LSI Corporation. All rights reserved. * +* Copyright (c) 2000-2008 LSI Corporation. All rights reserved. * * * * Description * * ------------ *
@@ -73,6 +73,8 @@#define IOP_LOGINFO_CODE_TARGET_MODE_ABORT_EXACT_IO (0x00070004)#define IOP_LOGINFO_CODE_TARGET_MODE_ABORT_EXACT_IO_REQ (0x00070005) +#define IOP_LOGINFO_CODE_LOG_TIMESTAMP_EVENT (0x00080000) +/****************************************************************************/ /* PL LOGINFO_CODE defines, valid if IOC_LOGINFO_ORIGINATOR = PL */ /****************************************************************************/
@@ -92,7 +94,7 @@#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_OPEN_TIMEOUT_EXP (0x0000000C)#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_UNUSED_0D (0x0000000D)#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_DVTBLE_ACCSS_FAIL (0x0000000E) -#define PL_LOGINFO_SUB CODE_OPEN_FAIL_BAD_DEST (0x00000011) +#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_BAD_DEST (0x00000011)#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RATE_NOT_SUPP (0x00000012)#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_PROT_NOT_SUPP (0x00000013)#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RESERVED_ABANDON0 (0x00000014)
@@ -159,10 +161,11 @@#define PL_LOGINFO_SUB_CODE_INVALID_SGL (0x00000200)#define PL_LOGINFO_SUB_CODE_WRONG_REL_OFF_OR_FRAME_LENGTH (0x00000300) -#define PL_LOGINFO_SUB_CODE_FRAME_XFER_ERROR (0x00000400)/* Bits 0-3 encode Transport Status Register (offset 0x08) */ -/* Bit 0 is Status Bit 0: FrameXferErr */ -/* Bit 1 & 2 are Status Bits 16 and 17: FrameXmitErrStatus */ -/* Bit 3 is Status Bit 18 WriteDataLengthGTDataLengthErr */ +#define PL_LOGINFO_SUB_CODE_FRAME_XFER_ERROR (0x00000400) +/* Bits 0-3 encode Transport Status Register (offset 0x08) */ +/* Bit 0 is Status Bit 0: FrameXferErr */ +/* Bit 1 & 2 are Status Bits 16 and 17: FrameXmitErrStatus */ +/* Bit 3 is Status Bit 18 WriteDataLenghtGTDataLengthErr */ #define PL_LOGINFO_SUB_CODE_TX_FM_CONNECTED_LOW (0x00000500)#define PL_LOGINFO_SUB_CODE_SATA_NON_NCQ_RW_ERR_BIT_SET (0x00000600)
@@ -177,6 +180,11 @@#define PL_LOGINFO_SUB_CODE_DISCOVERY_REMOTE_SEP_RESET (0x00000E01)#define PL_LOGINFO_SUB_CODE_SECOND_OPEN (0x00000F00)#define PL_LOGINFO_SUB_CODE_DSCVRY_SATA_INIT_TIMEOUT (0x00001000) +#define PL_LOGINFO_SUB_CODE_BREAK_ON_SATA_CONNECTION (0x00002000) +/* not currently used in mainline */ +#define PL_LOGINFO_SUB_CODE_BREAK_ON_STUCK_LINK (0x00003000) +#define PL_LOGINFO_SUB_CODE_BREAK_ON_STUCK_LINK_AIP (0x00004000) +#define PL_LOGINFO_SUB_CODE_BREAK_ON_INCOMPLETE_BREAK_RCVD (0x00005000)#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_FRAME_FAILURE (0x00200000)/* Can't get SMP Frame */ #define PL_LOGINFO_CODE_ENCL_MGMT_SMP_READ_ERROR (0x00200010)/* Error occured on SMP Read */
@@ -243,6 +251,8 @@#define IR_LOGINFO_VOLUME_ACTIVATE_VOLUME_FAILED (0x00010014)/* Activation failed trying to import the volume */ #define IR_LOGINFO_VOLUME_ACTIVATING_IMPORT_VOLUME_FAILED (0x00010015) +/* Activation failed trying to import the volume */ +#define IR_LOGINFO_VOLUME_ACTIVATING_TOO_MANY_PHYS_DISKS (0x00010016)/* Phys Disk failed, too many phys disks */ #define IR_LOGINFO_PHYSDISK_CREATE_TOO_MANY_DISKS (0x00010020)
@@ -285,6 +295,21 @@/* Compatibility Error : IME size limited to < 2TB */ #define IR_LOGINFO_COMPAT_ERROR_IME_VOL_NOT_CURRENTLY_SUPPORTED (0x0001003D) +/* Device Firmware Update: DFU can only be started once */ +#define IR_LOGINFO_DEV_FW_UPDATE_ERR_DFU_IN_PROGRESS (0x00010050) +/* Device Firmware Update: Volume must be Optimal/Active/non-Quiesced */ +#define IR_LOGINFO_DEV_FW_UPDATE_ERR_DEVICE_IN_INVALID_STATE (0x00010051) +/* Device Firmware Update: DFU Timeout cannot be zero */ +#define IR_LOGINFO_DEV_FW_UPDATE_ERR_INVALID_TIMEOUT (0x00010052) +/* Device Firmware Update: CREATE TIMER FAILED */ +#define IR_LOGINFO_DEV_FW_UPDATE_ERR_NO_TIMERS (0x00010053) +/* Device Firmware Update: Failed to read SAS_IO_UNIT_PG_1 */ +#define IR_LOGINFO_DEV_FW_UPDATE_ERR_READING_CFG_PAGE (0x00010054) +/* Device Firmware Update: Invalid SAS_IO_UNIT_PG_1 value(s) */ +#define IR_LOGINFO_DEV_FW_UPDATE_ERR_PORT_IO_TIMEOUTS_REQUIRED (0x00010055) +/* Device Firmware Update: Unable to allocate memory for page */ +#define IR_LOGINFO_DEV_FW_UPDATE_ERR_ALLOC_CFG_PAGE (0x00010056) +/****************************************************************************/ /* Defines for convenience */
drivers/message/fusion/lsi/mpi_raid.h +9 -2
@@ -1,12 +1,12 @@/* -* Copyright (c) 2001-2007 LSI Corporation. +* Copyright (c) 2001-2008 LSI Corporation. * * * Name: mpi_raid.h * Title: MPI RAID message and structures * Creation Date: February 27, 2001 * -* mpi_raid.h Version: 01.05.03 +* mpi_raid.h Version: 01.05.05 * * Version History * ---------------
@@ -34,6 +34,9 @@* _SET_RESYNC_RATE and _SET_DATA_SCRUB_RATE. * 02-28-07 01.05.03 Added new RAID Action, Device FW Update Mode, and * associated defines. +* 08-07-07 01.05.04 Added Disable Full Rebuild bit to the ActionDataWord +* for the RAID Action MPI_RAID_ACTION_DISABLE_VOLUME. +* 01-15-08 01.05.05 Added define for MPI_RAID_ACTION_SET_VOLUME_NAME. * -------------------------------------------------------------------------- */
@@ -93,6 +96,7 @@ typedef struct _MSG_RAID_ACTION#define MPI_RAID_ACTION_SET_RESYNC_RATE (0x13)#define MPI_RAID_ACTION_SET_DATA_SCRUB_RATE (0x14)#define MPI_RAID_ACTION_DEVICE_FW_UPDATE_MODE (0x15) +#define MPI_RAID_ACTION_SET_VOLUME_NAME (0x16)/* ActionDataWord defines for use with MPI_RAID_ACTION_CREATE_VOLUME action */ #define MPI_RAID_ACTION_ADATA_DO_NOT_SYNC (0x00000001)
@@ -105,6 +109,9 @@ typedef struct _MSG_RAID_ACTION#define MPI_RAID_ACTION_ADATA_KEEP_LBA0 (0x00000000)#define MPI_RAID_ACTION_ADATA_ZERO_LBA0 (0x00000002) +/* ActionDataWord defines for use with MPI_RAID_ACTION_DISABLE_VOLUME action */ +#define MPI_RAID_ACTION_ADATA_DISABLE_FULL_REBUILD (0x00000001) +/* ActionDataWord defines for use with MPI_RAID_ACTION_ACTIVATE_VOLUME action */ #define MPI_RAID_ACTION_ADATA_INACTIVATE_ALL (0x00000001)
drivers/message/fusion/lsi/mpi_sas.h +13 -5
@@ -1,12 +1,12 @@/* -* Copyright (c) 2004-2006 LSI Corporation. +* Copyright (c) 2004-2008 LSI Corporation. * * * Name: mpi_sas.h * Title: MPI Serial Attached SCSI structures and definitions * Creation Date: August 19, 2004 * -* mpi_sas.h Version: 01.05.04 +* mpi_sas.h Version: 01.05.05 * * Version History * ---------------
@@ -23,6 +23,10 @@* reply. * 10-11-06 01.05.04 Fixed the name of a define for Operation field of SAS IO * Unit Control request. +* 01-15-08 01.05.05 Added support for MPI_SAS_OP_SET_IOC_PARAMETER, +* including adding IOCParameter and IOCParameter value +* fields to SAS IO Unit Control Request. +* Added MPI_SAS_DEVICE_INFO_PRODUCT_SPECIFIC define. * -------------------------------------------------------------------------- */
@@ -60,6 +64,8 @@* Values for the SAS DeviceInfo field used in SAS Device Status Change Event * data and SAS IO Unit Configuration pages. */ +#define MPI_SAS_DEVICE_INFO_PRODUCT_SPECIFIC (0xF0000000) +#define MPI_SAS_DEVICE_INFO_SEP (0x00004000)#define MPI_SAS_DEVICE_INFO_ATAPI_DEVICE (0x00002000)#define MPI_SAS_DEVICE_INFO_LSI_DEVICE (0x00001000)
@@ -216,7 +222,7 @@ typedef struct _MSG_SAS_IOUNIT_CONTROL_REQUESTU8 ChainOffset;/* 02h */ U8 Function;/* 03h */ U16 DevHandle;/* 04h */ -U8 Reserved3;/* 06h */ +U8 IOCParameter;/* 06h */ U8 MsgFlags;/* 07h */ U32 MsgContext;/* 08h */ U8 TargetID;/* 0Ch */
@@ -225,7 +231,7 @@ typedef struct _MSG_SAS_IOUNIT_CONTROL_REQUESTU8 PrimFlags;/* 0Fh */ U32 Primitive;/* 10h */ U64 SASAddress;/* 14h */ -U32 Reserved4;/* 1Ch */ +U32 IOCParameterValue;/* 1Ch */ } MSG_SAS_IOUNIT_CONTROL_REQUEST, MPI_POINTER PTR_MSG_SAS_IOUNIT_CONTROL_REQUEST, SasIoUnitControlRequest_t, MPI_POINTER pSasIoUnitControlRequest_t;
@@ -241,6 +247,8 @@ typedef struct _MSG_SAS_IOUNIT_CONTROL_REQUEST#define MPI_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL (0x0C)#define MPI_SAS_OP_TRANSMIT_REMOVE_DEVICE (0x0D)/* obsolete name */ #define MPI_SAS_OP_REMOVE_DEVICE (0x0D) +#define MPI_SAS_OP_SET_IOC_PARAMETER (0x0E) +#define MPI_SAS_OP_PRODUCT_SPECIFIC_MIN (0x80)/* values for the PrimFlags field */ #define MPI_SAS_PRIMFLAGS_SINGLE (0x08)
@@ -256,7 +264,7 @@ typedef struct _MSG_SAS_IOUNIT_CONTROL_REPLYU8 MsgLength;/* 02h */ U8 Function;/* 03h */ U16 DevHandle;/* 04h */ -U8 Reserved3;/* 06h */ +U8 IOCParameter;/* 06h */ U8 MsgFlags;/* 07h */ U32 MsgContext;/* 08h */ U16 Reserved4;/* 0Ch */
drivers/message/fusion/lsi/mpi_targ.h +1 -1
@@ -1,5 +1,5 @@/* -* Copyright (c) 2000-2004 LSI Corporation. +* Copyright (c) 2000-2008 LSI Corporation. * * * Name: mpi_targ.h
drivers/message/fusion/lsi/mpi_tool.h +1 -1
@@ -1,5 +1,5 @@/* -* Copyright (c) 2001-2005 LSI Corporation. +* Copyright (c) 2001-2008 LSI Corporation. * * * Name: mpi_tool.h
drivers/message/fusion/lsi/mpi_type.h +2 -2
@@ -1,12 +1,12 @@/* -* Copyright (c) 2000-2004 LSI Corporation. +* Copyright (c) 2000-2008 LSI Corporation. * * * Name: mpi_type.h * Title: MPI Basic type definitions * Creation Date: June 6, 2000 * -* mpi_type.h Version: 01.05.01 +* mpi_type.h Version: 01.05.02 * * Version History * ---------------
James Bottomley
maintainerQuoted 2 lines · Desai
This Patch is submitted to increment the MPI headers used by LSI MPT fusion drivers to the latest version 01.05.19.
You mean 01.05.16? That's what all the headers say:
Quoted 10 lines
Year is changed in CopyRight.
---Signed-off-by Kashyap Desai <[email protected]>---
drivers/message/fusion/lsi/mpi.h +0
-0
drivers/message/fusion/lsi/mpi.h line 9
Quoted 5 lines
drivers/message/fusion/lsi/mpi.h +1
-1@@ -6,7 +6,7 @@* Title: MPI Message independent structures and definitions * Creation Date: July 27, 2000 * -* mpi.h Version: 01.05.13 +* mpi.h Version: 01.05.16
^^^^^^^^
James
Quoted 5 lines · James Bottomley
Quoted 2 lines · Desai
This Patch is submitted to increment the MPI headers used by LSI MPT fusion drivers to the latest version 01.05.19.
You mean 01.05.16? That's what all the headers say:
-#define MPI_HEADER_VERSION_UNIT (0x10)
+#define MPI_HEADER_VERSION_UNIT (0x13)
Quoted 4 lines
Quoted 4 lines
Year is changed in CopyRight.
---
Quoted 13 lines
drivers/message/fusion/lsi/mpi.h line 9
Quoted 12 lines
Signed-off-by Kashyap Desai <[email protected]>---
drivers/message/fusion/lsi/mpi.h +1
-1@@ -6,7 +6,7 @@* Title: MPI Message independent structures and definitions * Creation Date: July 27, 2000 * -* mpi.h Version: 01.05.13 +* mpi.h Version: 01.05.16 ^^^^^^^^
The code and the comments obviously don't agree:
-#define MPI_HEADER_VERSION_UNIT (0x10)
+#define MPI_HEADER_VERSION_UNIT (0x13)
Kashyap,
James was implying you need to rework/resubmit the patch so the code and comments agree.
grant
James,
It 01.05.19 is package version whereas 01.05.16 is mpi.h file version. Version info is available in lsi/mpi_history.txt
Thanks
Kashyap Desai
-----Original Message-----
From: James Bottomley [mailto:[email protected]]
Sent: Tuesday, January 06, 2009 8:51 PM
To: Desai, Kashyap
Cc: [email protected]; Moore, Eric; Prakash, Sathya
Subject: Re: [PATCH 1/5] mpt fusion: Update MPI Headers to version 01.05.19
Quoted 2 lines · Desai
This Patch is submitted to increment the MPI headers used by LSI MPT fusion drivers to the latest version 01.05.19.
You mean 01.05.16? That's what all the headers say:
Quoted 10 lines
Year is changed in CopyRight.
---Signed-off-by Kashyap Desai <[email protected]>---
drivers/message/fusion/lsi/mpi.h +0
-0
drivers/message/fusion/lsi/mpi.h line 9
Quoted 5 lines
drivers/message/fusion/lsi/mpi.h +1
-1@@ -6,7 +6,7 @@* Title: MPI Message independent structures and definitions * Creation Date: July 27, 2000 * -* mpi.h Version: 01.05.13 +* mpi.h Version: 01.05.16
^^^^^^^^
James
James Bottomley
maintainerQuoted 7 lines · Desai
This Patch is submitted to increment the MPI headers used by LSI MPT fusion drivers to the latest version 01.05.19.
Year is changed in CopyRight.
---Signed-off-by Kashyap Desai <[email protected]>---
Just for future reference, could you not format your patches like this. They way git import works is that it takes all of the text up to the first --- As the patch description and everything after it as the patch. If you put your signoff after the ---, I lose it in the import and have to notice and add it back manually.
James