sysrq loglevel
Subsystems (2)
It seems that we deliberatly manage the console_loglevel while handling a sysrq request. Raising it to 7 to emit the sysrq command header, and then lower it before processing the command itself. When booting the kernel 'quiet' this means that we only see the header of the command and not its output on the console, the whole thing is in dmesg and thereby in syslog (if it is working).
void __handle_sysrq(int key, struct tty_struct *tty, int check_mask) [...]
console_loglevel = 7;
printk(KERN_INFO "SysRq : ");
[...]
printk("%s\n", op_p->action_msg);
console_loglevel = orig_log_level;
op_p->handler(key, tty);[...]
Is this intentional? I can see arguments both ways. One way to look at it would be that I asked for the output so I should get it regardless. The other side might be that consoles can be really slow (serial or something) and so only outputting it there if logging is enabled generally is sane.
Obviously we can work round this at the moment using sysrq-7 to up the loglevel before the command and sysrq-4 after to restore quiet.
What do people think. If we are happy with the status quo then I will spin a documentation patch to point out this behaviour and the work around. Else I will happily spin a patch to fix it.
Thoughts?
-apw
Quoted 6 lines · On Wed, 7 Jan 2009 12:37:58 +0000 Andy Whitcroft <[email protected]> wrote:
It seems that we deliberatly manage the
console_loglevelwhile handling a sysrq request. Raising it to 7 to emit the sysrq command header, and then lower it before processing the command itself. When booting the kernel 'quiet' this means that we only see the header of the command and not its output on the console, the whole thing is in dmesg and thereby in syslog (if it is working).
I always thought it was fairly stupid. Wouldn't we get the same effect by tossing that code and switching those printks to KERN_EMERG?
Quoted 16 lines
void
__handle_sysrq(int key, struct tty_struct *tty, int check_mask)[...]console_loglevel = 7; printk(KERN_INFO "SysRq : "); [...] printk("%s\n", op_p->action_msg); console_loglevel = orig_log_level; op_p->handler(key, tty);[...]
Is this intentional? I can see arguments both ways. One way to look at it would be that I asked for the output so I should get it regardless. The other side might be that consoles can be really slow (serial or something) and so only outputting it there if logging is enabled generally is sane.
Quoted 7 lines
Obviously we can work round this at the moment using sysrq-7 to up the loglevel before the command and sysrq-4 after to restore quiet.
What do people think. If we are happy with the status quo then I will spin a documentation patch to point out this behaviour and the work around. Else I will happily spin a patch to fix it.
There is a legitimate use case, I think: to emit the sysrq command's output into the log bufffer and not to the console[s]. So you can do
echo t > /proc/sysrq-trigger dmesg -s 1000000 > foo
Quoted 11 lines · Andrew Morton
Quoted 6 lines · On Wed, 7 Jan 2009 12:37:58 +0000 Andy Whitcroft <[email protected]> wrote:
It seems that we deliberatly manage the
console_loglevelwhile handling a sysrq request. Raising it to 7 to emit the sysrq command header, and then lower it before processing the command itself. When booting the kernel 'quiet' this means that we only see the header of the command and not its output on the console, the whole thing is in dmesg and thereby in syslog (if it is working).I always thought it was fairly stupid. Wouldn't we get the same effect by tossing that code and switching those printks to
KERN_EMERG?
I believe it is different as the level is still KERN_INFO and that is what the consumers of /proc/kmsg will see, and that might affect where they are logged to.
Quoted 24 lines
Quoted 16 lines
void
__handle_sysrq(int key, struct tty_struct *tty, int check_mask)[...]console_loglevel = 7; printk(KERN_INFO "SysRq : "); [...] printk("%s\n", op_p->action_msg); console_loglevel = orig_log_level; op_p->handler(key, tty);[...]
Is this intentional? I can see arguments both ways. One way to look at it would be that I asked for the output so I should get it regardless. The other side might be that consoles can be really slow (serial or something) and so only outputting it there if logging is enabled generally is sane.
Quoted 7 lines
Obviously we can work round this at the moment using sysrq-7 to up the loglevel before the command and sysrq-4 after to restore quiet.
What do people think. If we are happy with the status quo then I will spin a documentation patch to point out this behaviour and the work around. Else I will happily spin a patch to fix it.
Quoted 5 lines
There is a legitimate use case, I think: to emit the sysrq command's output into the log bufffer and not to the console[s]. So you can do
echo t > /proc/sysrq-trigger dmesg -s 1000000 > foo
Yeah I agree. I will spin a documentation patch to capture this reasoning so we don't end up asking again in a years time.
-apw
cover document sysrq interaction with loglevels
Following on from our discussion on sysrq and its interaction with console loglevels here are some documentation updates, both to the Documenation/sysrq.txt as well as to the source, to clarify how things work and why.
Following this email are three patches. The first simply removes a redundant 'last modified date' within the documentation file, git does this far better. The second adds a new documentation section indicating why you might only see the header of the sysrq command you have requested. The last adds a comment to the console_loglevel modifications within the sysrq code paths explaining why we might do this.
Andrew please consider for -mm.
-apw
Andy Whitcroft (3):
sysrq documentation: remove the redundant updated date sysrq documentation: document why the command header only is shown
sysrq: add commentary on why we use the console loglevel over using
KERN_EMERG
Documentation/sysrq.txt | 19 ++++++++++++++++++- drivers/char/sysrq.c | 6 ++++++ 2 files changed, 24 insertions(+), 1 deletions(-)
PATCH 1/3 sysrq documentation: remove the redundant updated date
git is maintaining the last update time much more accuratly than the internal update time. Remove it.
--- Documentation/sysrq.txt | 1 - 1 files changed, 0 insertions(+), 1 deletions(-)
Documentation/sysrq.txt +0 -1
@@ -1,6 +1,5 @@ Linux Magic System Request Key Hacks Documentation for sysrq.c -Last update: 2007-AUG-04 * What is the magic SysRq key? ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signature · 1 line
1.6.0.4.911.gc990
PATCH 2/3 sysrq documentation: document why the command header only is shown
In reply to Andy WhitcroftDocument the interactions between loglevel and the sysrq output. Also document how to work round it should output on the console be required.
--- Documentation/sysrq.txt | 18 ++++++++++++++++++ 1 files changed, 18 insertions(+), 0 deletions(-)
Documentation/sysrq.txt +18 -0
@@ -210,6 +210,24 @@ within a function called by handle_sysrq, you must be aware that you are in a lock (you are also in an interrupt handler, which means don't sleep!), so you must call __handle_sysrq_nolock instead. +* When I hit a sysrq combination only the header appears on the console, why? +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +Sysrq output is subject to the same console loglevel control as all +other console output. This means that if the kernel was booted 'quiet' +as is common on distro kernels the output may not appear on the actual +console, even though it will appear in the dmesg buffer, and be accessible +via the dmesg command and to the consumers of /proc/kmsg. As a specific +exception the header line from the sysrq command is passed to all console +consumers as if the current loglevel was maximum. If only the header +is emitted it is almost cirtain that the kernel loglevel is too low. +Should you require the output on the console channel then you will need +to temporarily up the console loglevel using alt-sysrq-8 or: + + echo 8 > /proc/sysrq-trigger + +Remember to return the loglevel to normal after triggering the sysrq +command you are interested in. + * I have more questions, who can I ask? ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ And I'll answer any questions about the registration system you got, also
Signature · 1 line
1.6.0.4.911.gc990
Re: [PATCH 2/3] sysrq documentation: document why the command header only is shown
Quoted 13 lines · Andy Whitcroft
Document the interactions between loglevel and the sysrq output. Also document how to work round it should output on the console be required.
Signed-off-by Andy Whitcroft <[email protected]>--- Documentation/sysrq.txt | 18 ++++++++++++++++++ 1 files changed, 18 insertions(+), 0 deletions(-)Documentation/sysrq.txt +0
-0
Documentation/sysrq.txt within a function called by handle_sysrq, you must be aware that you are in · line 213
Quoted 4 lines
Documentation/sysrq.txt +1
-0@@ -210,6 +210,24 @@ within a function called by handle_sysrq, you must be aware that you are in a lock (you are also in an interrupt handler, which means don't sleep!), so you must call __handle_sysrq_nolock instead. +* When I hit a sysrq combination only the header appears on the console, why?
* When I hit a sysrq key combination, only the header appears on the console. Why?
Documentation/sysrq.txt within a function called by handle_sysrq, you must be aware that you are in · line 222
Quoted 9 lines
Documentation/sysrq.txt +9
-0+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +Sysrq output is subject to the same console loglevel control as all +other console output. This means that if the kernel was booted 'quiet' +as is common on distro kernels the output may not appear on the actual +console, even though it will appear in the dmesg buffer, and be accessible +via the dmesg command and to the consumers of /proc/kmsg. As a specific +exception the header line from the sysrq command is passed to all console +consumers as if the current loglevel was maximum. If only the header +is emitted it is almost cirtain that the kernel loglevel is too low.
certain
Quoted 11 lines
Documentation/sysrq.txt +8
-0+Should you require the output on the console channel then you will need +to temporarily up the console loglevel using alt-sysrq-8 or: + + echo 8 > /proc/sysrq-trigger + +Remember to return the loglevel to normal after triggering the sysrq +command you are interested in. + * I have more questions, who can I ask? ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ And I'll answer any questions about the registration system you got, also
Signature · 1 line
~Randy
PATCH 3/3 sysrq: add commentary on why we use the console loglevel over using KERN_EMERG
In reply to Andy WhitcroftAdd an explanitory comment as to why we modify the kernel console loglevel rather than simply moving sysrq messages to KERN_EMERG level.
--- drivers/char/sysrq.c | 6 ++++++ 1 files changed, 6 insertions(+), 0 deletions(-)
drivers/char/sysrq.c +6 -0
@@ -473,6 +473,12 @@ void __handle_sysrq(int key, struct tty_struct *tty, int check_mask)unsigned long flags;spin_lock_irqsave (&sysrq_key_table_lock, flags); +/* +* Raise the apparent loglevel to maximum so that the sysrq header +* is shown to provide the user with positive feedback. We do not +* simply emit this at KERN_EMERG as that would change message +* routing in the consumers of /proc/kmsg. +*/ orig_log_level = console_loglevel; console_loglevel =7 ;printk (KERN_INFO "SysRq : " );
Signature · 1 line
1.6.0.4.911.gc990
Re: [PATCH 3/3] sysrq: add commentary on why we use the console loglevel over using KERN_EMERG
Quoted 1 line · Andy Whitcroft
Add an explanitory comment as to why we modify the kernel console
explanatory
Quoted 3 lines
loglevel rather than simply moving sysrq messages to
KERN_EMERGlevel.Signed-off-by Andy Whitcroft <[email protected]>
Nick.
cover document sysrq interaction with loglevels V2
In reply to Andy Whitcroft[Updated patch series incorporating feedback from Martin Mares and Randy Dunlap.]
Following on from our discussion on sysrq and its interaction with console loglevels here are some documentation updates, both to the Documenation/sysrq.txt as well as to the source, to clarify how things work and why.
Following this email are three patches. The first simply removes a redundant 'last modified date' within the documentation file, git does this far better. The second adds a new documentation section indicating why you might only see the header of the sysrq command you have requested. The last adds a comment to the console_loglevel modifications within the sysrq code paths explaining why we might do this.
Andrew please consider for -mm.
-apw
Andy Whitcroft (3):
sysrq documentation: remove the redundant updated date sysrq documentation: document why the command header only is shown
sysrq: add commentary on why we use the console loglevel over using
KERN_EMERG
Documentation/sysrq.txt | 19 ++++++++++++++++++- drivers/char/sysrq.c | 6 ++++++ 2 files changed, 24 insertions(+), 1 deletions(-)
PATCH 1/3 sysrq documentation: remove the redundant updated date
git is maintaining the last update time much more accuratly than the internal update time. Remove it.
--- Documentation/sysrq.txt | 1 - 1 files changed, 0 insertions(+), 1 deletions(-)
Documentation/sysrq.txt +0 -1
@@ -1,6 +1,5 @@ Linux Magic System Request Key Hacks Documentation for sysrq.c -Last update: 2007-AUG-04 * What is the magic SysRq key? ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signature · 1 line
1.6.0.4.911.gc990
PATCH 2/3 sysrq documentation: document why the command header only is shown
In reply to Andy WhitcroftDocument the interactions between loglevel and the sysrq output. Also document how to work round it should output be required on the console.
--- Documentation/sysrq.txt | 18 ++++++++++++++++++ 1 files changed, 18 insertions(+), 0 deletions(-)
Documentation/sysrq.txt +18 -0
@@ -210,6 +210,24 @@ within a function called by handle_sysrq, you must be aware that you are in a lock (you are also in an interrupt handler, which means don't sleep!), so you must call __handle_sysrq_nolock instead. +* When I hit a SysRq key combination only the header appears on the console? +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +Sysrq output is subject to the same console loglevel control as all +other console output. This means that if the kernel was booted 'quiet' +as is common on distro kernels the output may not appear on the actual +console, even though it will appear in the dmesg buffer, and be accessible +via the dmesg command and to the consumers of /proc/kmsg. As a specific +exception the header line from the sysrq command is passed to all console +consumers as if the current loglevel was maximum. If only the header +is emitted it is almost certain that the kernel loglevel is too low. +Should you require the output on the console channel then you will need +to temporarily up the console loglevel using alt-sysrq-8 or: + + echo 8 > /proc/sysrq-trigger + +Remember to return the loglevel to normal after triggering the sysrq +command you are interested in. + * I have more questions, who can I ask? ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ And I'll answer any questions about the registration system you got, also
Signature · 1 line
1.6.0.4.911.gc990
PATCH 3/3 sysrq: add commentary on why we use the console loglevel over using KERN_EMERG
In reply to Andy WhitcroftAdd an explanitory comment as to why we modify the kernel console loglevel rather than simply moving sysrq messages to KERN_EMERG level.
--- drivers/char/sysrq.c | 6 ++++++ 1 files changed, 6 insertions(+), 0 deletions(-)
drivers/char/sysrq.c +6 -0
@@ -473,6 +473,12 @@ void __handle_sysrq(int key, struct tty_struct *tty, int check_mask)unsigned long flags;spin_lock_irqsave (&sysrq_key_table_lock, flags); +/* +* Raise the apparent loglevel to maximum so that the sysrq header +* is shown to provide the user with positive feedback. We do not +* simply emit this at KERN_EMERG as that would change message +* routing in the consumers of /proc/kmsg. +*/ orig_log_level = console_loglevel; console_loglevel =7 ;printk (KERN_INFO "SysRq : " );
Signature · 1 line
1.6.0.4.911.gc990