Skip to contentSkip to conversation

Terratec Cinergy Hybrid XE

linux-dvb Momesso Andrea 1 participant 2 messages Jan 9, 2009 – Jan 12, 2009 Media (V4L/DVB)

lore
Share & tools
lore
#0 lore raw

Has anybody got to make this usb stick work?

Here are some info:

/var/log/messages

Jan  9 16:03:05 revolver usb 2-1: new high speed USB device using
ehci_hcd and address 6
Jan  9 16:03:06 revolver usb 2-1: configuration #1 chosen from 1 choice

lsusb

Bus 002 Device 006: ID 0ccd:0086 TerraTec Electronic GmbH

lshw

*-usb:0 UNCLAIMED
description: Generic USB device
product: Cinergy Hybrid XE
vendor: TerraTec Electronic GmbH
physical id: 1
bus info: usb@2:1
version: 0.01
serial: 0008CA123456
capabilities: usb-2.00
configuration: maxpower=500mA
speed=480.0MB/s

hwinfo

1: udi = '/org/freedesktop/Hal/devices/usb_device_ccd_86_0008CA123456_if0'

    usb.vendor_id = 3277 (0xccd)
    usb.is_self_powered = false
    usb.product_id = 134 (0x86)
    usb.can_wake_up = true
    usb.vendor = 'TerraTec Electronic GmbH'
    usb.bus_number = 2 (0x2)
    linux.hotplug_type = 2 (0x2)
    info.subsystem = 'usb'
    linux.subsystem = 'usb'
    info.product = 'USB Vendor Specific Interface'
    usb.product = 'USB Vendor Specific Interface'
    info.udi = '/org/freedesktop/Hal/devices/usb_device_ccd_86_0008CA123456_if0'
    usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0'
    usb.device_revision_bcd = 1 (0x1)
    usb.configuration_value = 1 (0x1)
    usb.max_power = 500 (0x1f4)
    usb.num_configurations = 1 (0x1)
    usb.num_ports = 0 (0x0)
    usb.interface.number = 0 (0x0)
    usb.interface.class = 255 (0xff)
    usb.interface.subclass = 0 (0x0)
    usb.interface.protocol = 255 (0xff)
    usb.configuration =	'2.0'
    linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0'
    info.parent = '/org/freedesktop/Hal/devices/usb_device_ccd_86_0008CA123456'
    usb.num_interfaces = 1 (0x1)
    usb.linux.device_number = 6 (0x6)
    usb.device_class = 0 (0x0)
    usb.serial = '0008CA123456'
    usb.device_subclass = 0 (0x0)
    usb.speed = 480.000
    usb.device_protocol = 0 (0x0)
    usb.version = 2.00000

2: udi = '/org/freedesktop/Hal/devices/usb_device_ccd_86_0008CA123456'

    usb_device.num_interfaces = 1 (0x1)
    usb_device.linux.device_number = 6 (0x6)
    usb_device.configuration = '2.0'
    usb_device.device_class = 0 (0x0)
    usb_device.serial = '0008CA123456'
    linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1'
    info.subsystem = 'usb_device'
    usb_device.device_subclass = 0 (0x0)
    usb_device.speed = 480.000
    info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7_0'
    usb_device.device_protocol = 0 (0x0)
    info.vendor = 'TerraTec Electronic GmbH'
    info.product = 'Cinergy Hybrid XE'
    usb_device.version = 2.00000
    usb_device.vendor_id = 3277 (0xccd)
    usb_device.is_self_powered = false
    info.udi = '/org/freedesktop/Hal/devices/usb_device_ccd_86_0008CA123456'
    info.linux.driver = 'usb'
    usb_device.product_id = 134 (0x86)
    usb_device.can_wake_up = true
    usb_device.vendor = 'TerraTec Electronic GmbH'
    usb_device.bus_number = 2 (0x2)
    linux.hotplug_type = 2 (0x2)
    usb_device.product = 'Cinergy Hybrid XE'
    linux.subsystem = 'usb'
    linux.device_file = '/dev/bus/usb/002/006'
    usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1'
    usb_device.device_revision_bcd = 1 (0x1)
    usb_device.configuration_value = 1 (0x1)
    usb_device.max_power = 500 (0x1f4)
    usb_device.num_configurations = 1 (0x1)
    usb_device.num_ports = 0 (0x0)

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected] [email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

#1 lore raw
Quoted 1 line · Momesso Andrea

Has anybody got to make this usb stick work?

Bump...

I'm not used to bump on mailing lists, btw I'd like to know if:

1) has anyone got to make this stick work
2) there is no way to make it work
3) someone is interested in making it work and I can provide some info to help

Sorry again for bumping and thanks in advance.

Quoted 92 lines

Here are some info:

/var/log/messages

Jan  9 16:03:05 revolver usb 2-1: new high speed USB device using
ehci_hcd and address 6
Jan  9 16:03:06 revolver usb 2-1: configuration #1 chosen from 1 choice

lsusb

Bus 002 Device 006: ID 0ccd:0086 TerraTec Electronic GmbH

lshw

*-usb:0 UNCLAIMED
description: Generic USB device
product: Cinergy Hybrid XE
vendor: TerraTec Electronic GmbH
physical id: 1
bus info: usb@2:1
version: 0.01
serial: 0008CA123456
capabilities: usb-2.00
configuration: maxpower=500mA
speed=480.0MB/s

hwinfo

1: udi = '/org/freedesktop/Hal/devices/usb_device_ccd_86_0008CA123456_if0'

    usb.vendor_id = 3277 (0xccd)
    usb.is_self_powered = false
    usb.product_id = 134 (0x86)
    usb.can_wake_up = true
    usb.vendor = 'TerraTec Electronic GmbH'
    usb.bus_number = 2 (0x2)
    linux.hotplug_type = 2 (0x2)
    info.subsystem = 'usb'
    linux.subsystem = 'usb'
    info.product = 'USB Vendor Specific Interface'
    usb.product = 'USB Vendor Specific Interface'
    info.udi = '/org/freedesktop/Hal/devices/usb_device_ccd_86_0008CA123456_if0'
    usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0'
    usb.device_revision_bcd = 1 (0x1)
    usb.configuration_value = 1 (0x1)
    usb.max_power = 500 (0x1f4)
    usb.num_configurations = 1 (0x1)
    usb.num_ports = 0 (0x0)
    usb.interface.number = 0 (0x0)
    usb.interface.class = 255 (0xff)
    usb.interface.subclass = 0 (0x0)
    usb.interface.protocol = 255 (0xff)
    usb.configuration =	'2.0'
    linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0'
    info.parent = '/org/freedesktop/Hal/devices/usb_device_ccd_86_0008CA123456'
    usb.num_interfaces = 1 (0x1)
    usb.linux.device_number = 6 (0x6)
    usb.device_class = 0 (0x0)
    usb.serial = '0008CA123456'
    usb.device_subclass = 0 (0x0)
    usb.speed = 480.000
    usb.device_protocol = 0 (0x0)
    usb.version = 2.00000

2: udi = '/org/freedesktop/Hal/devices/usb_device_ccd_86_0008CA123456'

    usb_device.num_interfaces = 1 (0x1)
    usb_device.linux.device_number = 6 (0x6)
    usb_device.configuration = '2.0'
    usb_device.device_class = 0 (0x0)
    usb_device.serial = '0008CA123456'
    linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1'
    info.subsystem = 'usb_device'
    usb_device.device_subclass = 0 (0x0)
    usb_device.speed = 480.000
    info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7_0'
    usb_device.device_protocol = 0 (0x0)
    info.vendor = 'TerraTec Electronic GmbH'
    info.product = 'Cinergy Hybrid XE'
    usb_device.version = 2.00000
    usb_device.vendor_id = 3277 (0xccd)
    usb_device.is_self_powered = false
    info.udi = '/org/freedesktop/Hal/devices/usb_device_ccd_86_0008CA123456'
    info.linux.driver = 'usb'
    usb_device.product_id = 134 (0x86)
    usb_device.can_wake_up = true
    usb_device.vendor = 'TerraTec Electronic GmbH'
    usb_device.bus_number = 2 (0x2)
    linux.hotplug_type = 2 (0x2)
    usb_device.product = 'Cinergy Hybrid XE'
Quoted 8 lines
    linux.subsystem = 'usb'
    linux.device_file = '/dev/bus/usb/002/006'
    usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1'
    usb_device.device_revision_bcd = 1 (0x1)
    usb_device.configuration_value = 1 (0x1)
    usb_device.max_power = 500 (0x1f4)
    usb_device.num_configurations = 1 (0x1)
    usb_device.num_ports = 0 (0x0)

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected] [email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb