Skip to contentSkip to conversation

Intel HD audio in 2.6.28

DISCUSSION Lukas Hejtmanek 2 participants 4 messages Jan 13, 2009 – Jan 14, 2009

lore
Share & tools
lore
#0 lore raw

Hello,

I noticed that Intel HD audio in 2.6.28 is a bit broken. I have Lenovo ThinkPad T61 (AD198x).

The problem is that I'm unable to disable microphone routing to the speakers. I.e., I hear myself from the speakers. Muting on microphone in playback devices does nothing. Muting the Internal, disables the microphone completely. I think this is a bug.

Signature · 1 line
Lukáš Hejtmánek

Codec: Analog Devices AD1984
Address: 0
Vendor Id: 0x11d41984
Subsystem Id: 0x17aa20bb
Revision Id: 0x100400
No Modem Function Group found
Default PCM:

    rates [0x7ff]: 8000 11025 16000 22050 32000 44100 48000 88200 96000 176400 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM

Default Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Default Amp-Out caps: ofs=0x27, nsteps=0x27, stepsize=0x05, mute=0
GPIO: io=3, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=1 IO[1]: enable=1, dir=0, wake=0, sticky=0, data=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0
Node 0x02 [Audio Output] wcaps 0x30311: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:

    rates [0x7e0]: 44100 48000 88200 96000 176400 192000
    bits [0xe]: 16 20 24
    formats [0x5]: PCM AC3
  Delay: 3 samples
  Connection: 3
     0x01* 0x08 0x09

Node 0x03 [Audio Output] wcaps 0x405: Stereo Amp-Out
Amp-Out caps: ofs=0x27, nsteps=0x27, stepsize=0x05, mute=0 Amp-Out vals: [0x00 0x00]
Converter: stream=0, channel=0
Power: setting=D0, actual=D3
Node 0x04 [Audio Output] wcaps 0x405: Stereo Amp-Out
Amp-Out caps: ofs=0x27, nsteps=0x27, stepsize=0x05, mute=0 Amp-Out vals: [0x25 0x25]
Converter: stream=0, channel=0
Power: setting=D0, actual=D3
Node 0x05 [Audio Input] wcaps 0x10050b: Stereo Amp-In
Amp-In caps: ofs=0x27, nsteps=0x36, stepsize=0x05, mute=1 Amp-In vals: [0xa7 0xa7]
Converter: stream=0, channel=0
SDI-Select: 0
Power: setting=D0, actual=D3
Connection: 1

     0x17

Node 0x06 [Audio Input] wcaps 0x10050b: Stereo Amp-In
Amp-In caps: ofs=0x27, nsteps=0x36, stepsize=0x05, mute=1 Amp-In vals: [0xa7 0xa7]
Converter: stream=0, channel=0
SDI-Select: 0
Power: setting=D0, actual=D3
Connection: 1

     0x18

Node 0x07 [Audio Mixer] wcaps 0x200103: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2

     0x22 0x21

Node 0x08 [Audio Input] wcaps 0x100501: Stereo
Converter: stream=0, channel=0
SDI-Select: 0
Power: setting=D0, actual=D3
Connection: 1

     0x0c

Node 0x09 [Audio Input] wcaps 0x100501: Stereo
Converter: stream=0, channel=0
SDI-Select: 0
Power: setting=D0, actual=D3
Connection: 1

     0x0d

Node 0x0a [Audio Mixer] wcaps 0x200103: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2

     0x04 0x21

Node 0x0b [Audio Mixer] wcaps 0x200103: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80]
Connection: 2

     0x0f 0x21

Node 0x0c [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x27, nsteps=0x36, stepsize=0x05, mute=1 Amp-Out vals: [0x27 0x27]
Connection: 5

     0x14 0x15 0x16 0x20* 0x25

Node 0x0d [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x27, nsteps=0x36, stepsize=0x05, mute=1 Amp-Out vals: [0x27 0x27]
Connection: 5

     0x14 0x15 0x16 0x20* 0x25
Node 0x0e [Audio Selector] wcaps 0x300101: Stereo
  Connection: 2
     0x03 0x04*
Node 0x0f [Audio Selector] wcaps 0x300101: Stereo
  Connection: 2
     0x03* 0x04

Node 0x10 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Amp-Out caps: ofs=0x0f, nsteps=0x0f, stepsize=0x0b, mute=1 Amp-Out vals: [0x00]
Node 0x11 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00]
Pincap 0x0000001f: OUT HP Detect Trigger ImpSense Pin Default 0x0321401f: [Jack] HP Out at Ext Left
Conn = 1/8, Color = Green
DefAssociation = 0x1, Sequence = 0xf
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=00, enabled=0
Connection: 1

     0x07

Node 0x12 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00]
Pincap 0x0001001f: OUT HP EAPD Detect Trigger ImpSense EAPD 0x2: EAPD
Pin Default 0x90170110: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 1

     0x0a

Node 0x13 [Pin Complex] wcaps 0x40050c: Mono Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x00]
Pincap 0x00010010: OUT EAPD
EAPD 0x0:
Pin Default 0x511301f0: [N/A] Speaker at Int Rear
Conn = ATAPI, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Power: setting=D0, actual=D0
Connection: 1

     0x1f

Node 0x14 [Pin Complex] wcaps 0x40008b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00]
Pincap 0x00003727: IN Detect Trigger ImpSense

    Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x03a15021: [Jack] Mic at Ext Left
    Conn = 1/8, Color = Red
    DefAssociation = 0x2, Sequence = 0x1

Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Node 0x15 [Pin Complex] wcaps 0x40008b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x02 0x02]
Pincap 0x00003727: IN Detect Trigger ImpSense

    Vref caps: HIZ 50 GRD 80 100

Pin Default 0x90a7012e: [Fixed] Mic at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0x2, Sequence = 0xe
Misc = NO_PRESENCE
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Node 0x16 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80]
Pincap 0x00000037: IN OUT Detect Trigger ImpSense Pin Default 0x593301f0: [N/A] CD at Int ATAPI
Conn = ATAPI, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Connection: 1

     0x0b

Node 0x17 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x00000020: IN
Pin Default 0x55a601f0: [N/A] Mic at Int Top
Conn = Digital, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x24: IN
Node 0x18 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x00000020: IN
Pin Default 0x55a601f0: [N/A] Mic at Int Top
Conn = Digital, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Node 0x19 [Power Widget] wcaps 0x500500: Mono
Power: setting=D0, actual=D0
Connection: 2

     0x20* 0x21

Node 0x1a [Pin Complex] wcaps 0x400000: Mono
Pincap 0x00000020: IN
Pin Default 0x91f311f0: [Fixed] Other at Int Rear
Conn = ATAPI, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Node 0x1b [Pin Complex] wcaps 0x40030d: Stereo Digital Amp-Out
Amp-Out caps: ofs=0x27, nsteps=0x27, stepsize=0x05, mute=1 Amp-Out vals: [0x25 0x25]
Pincap 0x00000010: OUT
Pin Default 0x214411a0: [Jack] SPDIF Out at Sep Rear
Conn = RCA, Color = Black
DefAssociation = 0xa, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Connection: 1

     0x02

Node 0x1c [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80]
Pincap 0x00003737: IN OUT Detect Trigger ImpSense

    Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x21a15020: [Jack] Mic at Sep Rear
    Conn = 1/8, Color = Red
    DefAssociation = 0x2, Sequence = 0x0
  Pin-ctls: 0x24: IN VREF_80
  Unsolicited: tag=00, enabled=0
  Connection: 1
     0x24
Node 0x1d [Vendor Defined Widget] wcaps 0xf00100: Mono
  Connection: 25
     0x07* 0x19 0x0a 0x0b 0x0c 0x0d 0x0e 0x0f 0x1a 0x1c 0x11 0x12 0x13 0x14 0x15 0x16 0x1e 0x1f 0x20 0x21 0x22 0x23 0x24 0x25 0x26

Node 0x1e [Audio Mixer] wcaps 0x200103: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2

     0x0e 0x21
Node 0x1f [Audio Mixer] wcaps 0x200100: Mono
  Connection: 1
     0x1e

Node 0x20 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x8c 0x8c] [0x91 0x91] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 5

     0x14 0x15 0x16 0x1a 0x25

Node 0x21 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x1f 0x1f]
Connection: 1

     0x20
Node 0x22 [Audio Selector] wcaps 0x300101: Stereo
  Connection: 2
     0x03 0x04*
Node 0x23 [Audio Selector] wcaps 0x300101: Stereo
  Connection: 2
     0x03* 0x04

Node 0x24 [Audio Mixer] wcaps 0x200103: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80]
Connection: 2

     0x23 0x21

Node 0x25 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00]
Connection: 1

     0x1c
Node 0x26 [Vendor Defined Widget] wcaps 0xf00100: Mono
  Connection: 3
     0x14* 0x15 0x1c
#1 lore raw

At Tue, 13 Jan 2009 20:17:43 +0100,

Quoted 5 lines · Lukas Hejtmanek

Hello,

I noticed that Intel HD audio in 2.6.28 is a bit broken. I have Lenovo ThinkPad T61 (AD198x).

Is it a regression (I guess no) from any older version?

Quoted 4 lines

The problem is that I'm unable to disable microphone routing to the speakers. I.e., I hear myself from the speakers. Muting on microphone in playback devices does nothing. Muting the Internal, disables the microphone completely. I think this is a bug.

Please run alsa-info.sh with --no-upload option with several mixer states (e.g. internal mic switch on/off) and attach the generated files.

"Mic Playback Switch" doesn't control the internal mic. It's only for the mic jack. You should be able to mute "Internal Mic Playback Switch", and this should be irrelevant from the capture path.

Make sure that your mixer app does anything strange...

thanks,

Takashi

#2 lore raw
Quoted 5 lines · Takashi Iwai

"Mic Playback Switch" doesn't control the internal mic. It's only for the mic jack. You should be able to mute "Internal Mic Playback Switch", and this should be irrelevant from the capture path.

Make sure that your mixer app does anything strange...

I figured it out. I can choose input source as Internal, Dock, Mic, Mix. If I choose Mix, the Internal Mic in playback cannot be mute otherwise nothing is captured by an application. If I choose Internal, the Internal Mic in playback can be mute and applications still record from sound from the internal microphone.

Is this expected?

So: Input source = Internal = muting Internal Mic (in playback) works fine.
Input source = Mix = muting Internal Mic (in playback) stops recording
from the internal mic for applications.

If this is not expected, I send those alsa-info files. Thanks.

Signature · 1 line
Lukáš Hejtmánek
#3 lore raw

At Wed, 14 Jan 2009 11:14:43 +0100,

Quoted 8 lines · Lukas Hejtmanek
Quoted 5 lines · Takashi Iwai

"Mic Playback Switch" doesn't control the internal mic. It's only for the mic jack. You should be able to mute "Internal Mic Playback Switch", and this should be irrelevant from the capture path.

Make sure that your mixer app does anything strange...

Quoted 7 lines

I figured it out. I can choose input source as Internal, Dock, Mic, Mix. If I choose Mix, the Internal Mic in playback cannot be mute otherwise nothing is captured by an application. If I choose Internal, the Internal Mic in playback can be mute and applications still record from sound from the internal microphone.

Is this expected?

Yes. "Mix" means what you are hearing.

Takashi