2.6.29-rc1 on zaurus (spitz)
Hi!
2.6.29-rc1 was great step forward over previous kernels: it not only displays something on screen but also mounts root filesystem. Unfortunately it then panics with "attempted to kill init".
I tried both with CONFIG_EABI=N and CONFIG_EABI=Y, OABI_COMPAT=Y. Any more tricks I should try?
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Quoted 9 lines · Pavel Machek
Hi!
2.6.29-rc1 was great step forward over previous kernels: it not only displays something on screen but also mounts root filesystem. Unfortunately it then panics with "attempted to kill init".
I tried both with
CONFIG_EABI=NandCONFIG_EABI=Y, OABI_COMPAT=Y. Any more tricks I should try?
Don't enable EABI unless you have changed userspace to be EABI compliant. Also check that you have NWFPE enabled if you're not using a soft-float userspace.
You could also build the kernel with DEBUG_USER enabled and pass user_debug=-1 on the kernel's command line, and see if you get any more information.
Signature · 3 lines
Russell King Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/ maintainer of:
Quoted 8 lines · Russell King
Quoted 6 lines · Pavel Machek
Hi!
2.6.29-rc1 was great step forward over previous kernels: it not only displays something on screen but also mounts root filesystem. Unfortunately it then panics with "attempted to kill init".
Quoted 6 lines
Quoted 2 lines
I tried both with
CONFIG_EABI=NandCONFIG_EABI=Y, OABI_COMPAT=Y. Any more tricks I should try?Don't enable EABI unless you have changed userspace to be EABI compliant. Also check that you have NWFPE enabled if you're not using a soft-float userspace.
Probleem seems to be fixed in 2.6.29-rc3. 2.6.28 also works... (but won't charge the battery :-().
Quoted 3 lines
You could also build the kernel with
DEBUG_USERenabled and pass user_debug=-1 on the kernel's command line, and see if you get any more information.
Thanks for support!
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Hi,
2.6.29-rc4 boots on spitz and looks overall good but framebuffer redraws some lines terribly slow. When I'm editing text in bash from the middle in some cases I can see redrawing the text pixel by pixel. And suspend to ram on pressing On/Off button does nothing now (some missing config option?).
Signature · 4 lines
watashi |v|3+@n Cyril Hrubis [email protected] http://atrey.karlin.mff.cuni.cz/~metan/
Hi,
The display problems seems to be cpufreq related. It changes type of bad effects when varying cpu speed from slow and random line redraw to flashing big white random patterns. And I've seen similar behaviour with voipac pxa module where framebuffer with cpu set to 416Mhz moves accidentally some pixels to the right under cpu load. Moreover several speed changes leads to "hda: lost interrupt" on spitz.
Signature · 4 lines
watashi |v|3+@n Cyril Hrubis [email protected] http://atrey.karlin.mff.cuni.cz/~metan/
Hi!
Quoted 2 lines
And suspend to ram on pressing On/Off button does nothing now (some missing config option?).
It does not work for me either... but neither it does in 2.6.28...
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Quoted 6 lines · Cyril Hrubi?
Hi,
2.6.29-rc4 boots on spitz and looks overall good but framebuffer redraws some lines terribly slow. When I'm editing text in bash from the middle in some cases I can see redrawing the text pixel by pixel. And suspend to ram on pressing On/Off button does nothing now (some missing config option?).
Hmm, it gets worse: echo mem > /sys/power/state sleeps 2.6.28, but there's no way to resume it.
About hda timeouts... I remember seeing them under older kernels, too, under loads such as kernel compile... plus keypresses tend to get lost under high loads :-(.
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Quoted 10 lines · Pavel Machek
Quoted 6 lines · Cyril Hrubi?
Hi,
2.6.29-rc4 boots on spitz and looks overall good but framebuffer redraws some lines terribly slow. When I'm editing text in bash from the middle in some cases I can see redrawing the text pixel by pixel. And suspend to ram on pressing On/Off button does nothing now (some missing config option?).Hmm, it gets worse: echo mem >
/sys/power/statesleeps 2.6.28, but there's no way to resume it.
Sounds like the on/off button isn't configured as a wakeup source. Without knowing anything about the platform (iow, where the on/off button is connected) it's hard to tell what could be the problem.
Has the on/off button ever worked?
Quoted 3 lines
About hda timeouts... I remember seeing them under older kernels, too, under loads such as kernel compile... plus keypresses tend to get lost under high loads :-(.
Really, what we need is for someone to step up to take on sorting out Zaurus. Looking at this thread, it seems there's very few people here willing. Also, I think Richard Purdie has moved on from Zaurus stuff.
I know there are a small number of people on linux-arm-kernel who have access to some Zaurus platforms, but I don't know what they are. Really, you should be posting to that list if you seriously want help, because I doubt they're subscribed to LKML.
Signature · 3 lines
Russell King Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/ maintainer of:
Quoted 9 lines · Russell King
Quoted 8 lines · Pavel Machek
Quoted 6 lines · Cyril Hrubi?
Hi,
2.6.29-rc4 boots on spitz and looks overall good but framebuffer redraws some lines terribly slow. When I'm editing text in bash from the middle in some cases I can see redrawing the text pixel by pixel. And suspend to ram on pressing On/Off button does nothing now (some missing config option?).
Quoted 6 lines
Quoted 2 lines
Hmm, it gets worse: echo mem >
/sys/power/statesleeps 2.6.28, but there's no way to resume it.Sounds like the on/off button isn't configured as a wakeup source. Without knowing anything about the platform (iow, where the on/off button is connected) it's hard to tell what could be the problem.
Its connected in through GPIO 0.
Quoted 1 line
Has the on/off button ever worked?
Yes, this always used to work fine for both suspending and resuming.
Quoted 7 lines
Quoted 3 lines
About hda timeouts... I remember seeing them under older kernels, too, under loads such as kernel compile... plus keypresses tend to get lost under high loads :-(.
Really, what we need is for someone to step up to take on sorting out Zaurus. Looking at this thread, it seems there's very few people here willing. Also, I think Richard Purdie has moved on from Zaurus stuff.
Its really a time problem. I couldn't keep up with the PXA architecture changes and give enough time to review and test them all effectively and things have slipped from there. I've tried to provide input where I can but would certainly welcome any help. My new employer means I'll be doing less ARM work in general too for some reason...
Cheers,
Richard
Signature · 2 lines
Richard Purdie Intel Open Source Technology Centre
Quoted 5 lines
Quoted 4 lines
About hda timeouts... I remember seeing them under older kernels, too, under loads such as kernel compile... plus keypresses tend to get lost under high loads :-(.
Quoted 8 lines
Really, what we need is for someone to step up to take on sorting out Zaurus. Looking at this thread, it seems there's very few people here willing. Also, I think Richard Purdie has moved on from Zaurus stuff.
I know there are a small number of people on linux-arm-kernel who have access to some Zaurus platforms, but I don't know what they are. Really, you should be posting to that list if you seriously want help, because I doubt they're subscribed to LKML.
linux-arm-kernel seems subscriber-only :-(.
Anyway, new problem blocking testing is that somewhere between 2.6.29-rc3 and -rc7, pcmcia support stopped working => hda is no longer detected.
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Quoted 8 lines · Pavel Machek
Quoted 8 lines
Quoted 3 lines
About hda timeouts... I remember seeing them under older kernels, too, under loads such as kernel compile... plus keypresses tend to get lost under high loads :-(.
Really, what we need is for someone to step up to take on sorting out Zaurus. Looking at this thread, it seems there's very few people here willing. Also, I think Richard Purdie has moved on from Zaurus stuff.
Quoted 6 lines
Quoted 4 lines
I know there are a small number of people on linux-arm-kernel who have access to some Zaurus platforms, but I don't know what they are. Really, you should be posting to that list if you seriously want help, because I doubt they're subscribed to LKML.
linux-arm-kernel seems subscriber-only :-(.
Yes.
Quoted 3 lines
Anyway, new problem blocking testing is that somewhere between 2.6.29-rc3 and -rc7, pcmcia support stopped working => hda is no longer detected.
lalala, I'm not listening.
Really, if you want help, I've pointed you at the place where you can get that. I'm not able to give you any other help with your Zaurus problems.
Signature · 3 lines
Russell King Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/ maintainer of:
And, btw, please drop Pavel Urban's email address from future replies, it seems his address is not valid.
[email protected]
SMTP error from remote mail server after RCPT TO:<[email protected]>:
host m-in.ct.cz [194.228.96.22]: 553 5.3.0 <[email protected]>... Not in DB
Signature · 3 lines
Russell King Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/ maintainer of:
Hi!
Quoted 16 lines · Pavel Machek
Quoted 8 lines
Quoted 8 lines
Quoted 3 lines
About hda timeouts... I remember seeing them under older kernels, too, under loads such as kernel compile... plus keypresses tend to get lost under high loads :-(.
Really, what we need is for someone to step up to take on sorting out Zaurus. Looking at this thread, it seems there's very few people here willing. Also, I think Richard Purdie has moved on from Zaurus stuff.
Quoted 6 lines
Quoted 4 lines
I know there are a small number of people on linux-arm-kernel who have access to some Zaurus platforms, but I don't know what they are. Really, you should be posting to that list if you seriously want help, because I doubt they're subscribed to LKML.
linux-arm-kernel seems subscriber-only :-(.
Quoted 7 lines
Yes.
Quoted 3 lines
Anyway, new problem blocking testing is that somewhere between 2.6.29-rc3 and -rc7, pcmcia support stopped working => hda is no longer detected.
lalala, I'm not listening.
lalala... I think I tried to subscribe to linux-arm-kernel, but all I got is automated reply and no flood of messages. Is subscription moderated, too?
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html