powerpc/4xx: Add missing USB and i2c devices to Canyonlands
Subsystems (2)
PATCH 1/1 powerpc/4xx: Add missing USB and i2c devices to Canyonlands
This adds the device-tree entries for a handful of devices on the Canyonlands board, such as the EHCI and OHCI controllers, the real time clock and the AD7414 thermal monitor.
I also updated the defconfig to enable various options related to these devices.
Signed-off-by Benjamin Herrenschmidt <[email protected]>
---
arch/powerpc/boot/dts/canyonlands.dts | 28 ++ arch/powerpc/configs/44x/canyonlands_defconfig | 266 ++++++++++++++++++++++++- 2 files changed, 284 insertions(+), 10 deletions(-)
arch/powerpc/boot/dts/canyonlands.dts +28 -0
@@ -142,6 +142,20 @@ /*RXDE*/ 0x5 0x4>; }; + USB0: ehci@bffd0400 { + compatible = "ibm,usb-ehci-460ex", "usb-ehci"; + interrupt-parent = <&UIC2>; + interrupts = <0x1d 4>; + reg = <4 0xbffd0400 0x90 4 0xbffd0490 0x70>; + }; + + USB1: usb@bffd0000 { + compatible = "ohci-le"; + reg = <4 0xbffd0000 0x60>; + interrupt-parent = <&UIC2>; + interrupts = <0x1e 4>; + }; + POB0: opb { compatible = "ibm,opb-460ex", "ibm,opb"; #address-cells = <1>;
@@ -245,6 +259,20 @@ reg = <0xef600700 0x00000014>; interrupt-parent = <&UIC0>; interrupts = <0x2 0x4>; + #address-cells = <1>; + #size-cells = <0>; + rtc@68 { + compatible = "stm,m41t80"; + reg = <0x68>; + interrupt-parent = <&UIC2>; + interrupts = <0x19 0x8>; + }; + sttm@48 { + compatible = "ad,ad7414"; + reg = <0x48>; + interrupt-parent = <&UIC1>; + interrupts = <0x14 0x8>; + }; }; IIC1: i2c@ef600800 {
arch/powerpc/configs/44x/canyonlands_defconfig +256 -10
331 lines not on this page · raw message