Add tyan model for Realtek ALC262
PATCH 1/1 Add tyan model for Realtek ALC262
The Realtek ALC262 on the Tyan Thunder n6650W (S2915-E) mainboard has a rather odd configuration template. As a result, the white AUX connector can not be used. This rewrites the default config to more accurately reflect the connector layout, colour and function. Unfortunately the black CD_IN connector, which is suspected to be widget 0x1c refuses to switch into input (0x20), instead opting to remain on 0x0. As such, no mixer controls are exposed for it. Autoswitching is implemented between the front headphone output and back line output.
--
Takashi, this was done on top of 2.6.29-rc3. Please let me know if you'd like it rebased onto anything else instead. Unfortunately I was unable to resolve the recalcitrant widget problem, but at least the default config printed for widget 0x14 makes sense now.
sound/pci/hda/patch_realtek.c +77 -0
@@ -103,6 +103,7 @@ enum {ALC262_NEC ,ALC262_TOSHIBA_S06 ,ALC262_TOSHIBA_RX1 , +ALC262_TYAN ,ALC262_AUTO , ALC262_MODEL_LAST /* last tag */ };
@@ -9426,6 +9427,67 @@ static struct snd_kcontrol_new alc262_benq_t31_mixer[] = { { }/* end */ }; +static struct snd_kcontrol_new alc262_tyan_mixer[] = { +HDA_CODEC_VOLUME ("Master Playback Volume" ,0x0c ,0x0 ,HDA_OUTPUT ), +HDA_BIND_MUTE ("Master Playback Switch" ,0x0c ,2 ,HDA_INPUT ), +HDA_CODEC_VOLUME ("Aux Playback Volume" ,0x0b ,0x06 ,HDA_INPUT ), +HDA_CODEC_MUTE ("Aux Playback Switch" ,0x0b ,0x06 ,HDA_INPUT ), +HDA_CODEC_VOLUME ("Line Playback Volume" ,0x0b ,0x02 ,HDA_INPUT ), +HDA_CODEC_MUTE ("Line Playback Switch" ,0x0b ,0x02 ,HDA_INPUT ), +HDA_CODEC_VOLUME ("Mic Playback Volume" ,0x0b ,0x0 ,HDA_INPUT ), +HDA_CODEC_MUTE ("Mic Playback Switch" ,0x0b ,0x0 ,HDA_INPUT ), +HDA_CODEC_VOLUME ("Mic Boost" ,0x18 ,0 ,HDA_INPUT ), +HDA_CODEC_VOLUME ("Front Mic Playback Volume" ,0x0b ,0x01 ,HDA_INPUT ), +HDA_CODEC_MUTE ("Front Mic Playback Switch" ,0x0b ,0x01 ,HDA_INPUT ), +HDA_CODEC_VOLUME ("Front Mic Boost" ,0x19 ,0 ,HDA_INPUT ), + { }/* end */ +}; + +static struct hda_verb alc262_tyan_verbs[] = { +/* Headphone automute */ + {0x1b ,AC_VERB_SET_UNSOLICITED_ENABLE ,AC_USRSP_EN |ALC880_HP_EVENT }, + {0x1b ,AC_VERB_SET_PIN_WIDGET_CONTROL ,PIN_HP }, + {0x15 ,AC_VERB_SET_CONNECT_SEL ,0x00 }, + +/* P11 AUX_IN, white 4-pin connector */ + {0x14 ,AC_VERB_SET_PIN_WIDGET_CONTROL ,PIN_IN }, + {0x14 ,AC_VERB_SET_CONFIG_DEFAULT_BYTES_1 ,0xe1 }, + {0x14 ,AC_VERB_SET_CONFIG_DEFAULT_BYTES_2 ,0x93 }, + {0x14 ,AC_VERB_SET_CONFIG_DEFAULT_BYTES_3 ,0x19 }, + + {} +}; + +/* unsolicited event for HP jack sensing */ +static void alc262_tyan_automute (struct hda_codec *codec) +{ +unsigned int mute; +unsigned int present; + +snd_hda_codec_read (codec,0x1b ,0 ,AC_VERB_SET_PIN_SENSE ,0 ); + present =snd_hda_codec_read (codec,0x1b ,0 , +AC_VERB_GET_PIN_SENSE ,0 ); + present = (present &0x80000000 ) !=0 ; +if (present) { +/* mute line output on ATX panel */ +snd_hda_codec_amp_stereo (codec,0x15 ,HDA_OUTPUT ,0 , +HDA_AMP_MUTE ,HDA_AMP_MUTE ); + }else { +/* unmute line output if necessary */ + mute =snd_hda_codec_amp_read (codec,0x1b ,0 ,HDA_OUTPUT ,0 ); +snd_hda_codec_amp_stereo (codec,0x15 ,HDA_OUTPUT ,0 , +HDA_AMP_MUTE , mute); + } +} + +static void alc262_tyan_unsol_event (struct hda_codec *codec, +unsigned int res) +{ +if ((res >>26 ) !=ALC880_HP_EVENT ) +return ; +alc262_tyan_automute (codec); +} +#define alc262_capture_mixer alc882_capture_mixer#define alc262_capture_alt_mixer alc882_capture_alt_mixer
@@ -10534,6 +10596,7 @@ static const char *alc262_models[ALC262_MODEL_LAST] = { [ALC262_ULTRA] = "ultra", [ALC262_LENOVO_3000] = "lenovo-3000", [ALC262_NEC] = "nec", + [ALC262_TYAN] = "tyan", [ALC262_AUTO] = "auto", };
@@ -10574,6 +10637,7 @@ static struct snd_pci_quirk alc262_cfg_tbl[] = {SND_PCI_QUIRK (0x1179 ,0xff7b ,"Toshiba S06" ,ALC262_TOSHIBA_S06 ),SND_PCI_QUIRK (0x10cf ,0x1397 ,"Fujitsu" ,ALC262_FUJITSU ),SND_PCI_QUIRK (0x10cf ,0x142d ,"Fujitsu Lifebook E8410" ,ALC262_FUJITSU ), +SND_PCI_QUIRK (0x10f1 ,0x2915 ,"Tyan Thunder n6650W" ,ALC262_TYAN ),SND_PCI_QUIRK (0x144d ,0xc032 ,"Samsung Q1 Ultra" ,ALC262_ULTRA ),SND_PCI_QUIRK (0x144d ,0xc039 ,"Samsung Q1U EL" ,ALC262_ULTRA ), SND_PCI_QUIRK(0x144d, 0xc510, "Samsung Q45", ALC262_HIPPO),
@@ -10792,6 +10856,19 @@ static struct alc_config_preset alc262_presets[] = { .unsol_event = alc262_hippo_unsol_event, .init_hook = alc262_hippo_automute, }, + [ALC262_TYAN] = { + .mixers = { alc262_tyan_mixer }, + .init_verbs = { alc262_init_verbs, alc262_tyan_verbs}, + .num_dacs = ARRAY_SIZE(alc262_dac_nids), + .dac_nids = alc262_dac_nids, + .hp_nid = 0x02, + .dig_out_nid = ALC262_DIGOUT_NID, + .num_channel_mode = ARRAY_SIZE(alc262_modes), + .channel_mode = alc262_modes, + .input_mux = &alc262_capture_source, + .unsol_event = alc262_tyan_unsol_event, + .init_hook = alc262_tyan_automute, + }, };static int patch_alc262 (struct hda_codec *codec)
Takashi Iwai
AppliedAt Mon, 2 Feb 2009 19:01:30 +0000 (GMT),
Quoted 10 lines · Tony Vroon
The Realtek ALC262 on the Tyan Thunder n6650W (S2915-E) mainboard has a rather odd configuration template. As a result, the white AUX connector can not be used. This rewrites the default config to more accurately reflect the connector layout, colour and function. Unfortunately the black
CD_INconnector, which is suspected to be widget0x1crefuses to switch into input (0x20), instead opting to remain on0x0. As such, no mixer controls are exposed for it. Autoswitching is implemented between the front headphone output and back line output.
Quoted 6 lines
Signed-off-by Tony Vroon <[email protected]>--
Takashi, this was done on top of 2.6.29-rc3. Please let me know if you'd like it rebased onto anything else instead. Unfortunately I was unable to resolve the recalcitrant widget problem, but at least the default config printed for widget0x14makes sense now.
Thanks, applied now.
Could you make an update patch forDocumentation/sound/alsa/HD-Audio-Models.txt?
Takashi
Quoted 118 lines
sound/pci/hda/patch_realtek.c +77
-0@@ -103,6 +103,7 @@ enum {ALC262_NEC ,ALC262_TOSHIBA_S06 ,ALC262_TOSHIBA_RX1 , +ALC262_TYAN ,ALC262_AUTO , ALC262_MODEL_LAST /* last tag */ };@@ -9426,6 +9427,67 @@ static struct snd_kcontrol_new alc262_benq_t31_mixer[] = { { }/* end */ }; +static struct snd_kcontrol_new alc262_tyan_mixer[] = { +HDA_CODEC_VOLUME ("Master Playback Volume" ,0x0c ,0x0 ,HDA_OUTPUT ), +HDA_BIND_MUTE ("Master Playback Switch" ,0x0c ,2 ,HDA_INPUT ), +HDA_CODEC_VOLUME ("Aux Playback Volume" ,0x0b ,0x06 ,HDA_INPUT ), +HDA_CODEC_MUTE ("Aux Playback Switch" ,0x0b ,0x06 ,HDA_INPUT ), +HDA_CODEC_VOLUME ("Line Playback Volume" ,0x0b ,0x02 ,HDA_INPUT ), +HDA_CODEC_MUTE ("Line Playback Switch" ,0x0b ,0x02 ,HDA_INPUT ), +HDA_CODEC_VOLUME ("Mic Playback Volume" ,0x0b ,0x0 ,HDA_INPUT ), +HDA_CODEC_MUTE ("Mic Playback Switch" ,0x0b ,0x0 ,HDA_INPUT ), +HDA_CODEC_VOLUME ("Mic Boost" ,0x18 ,0 ,HDA_INPUT ), +HDA_CODEC_VOLUME ("Front Mic Playback Volume" ,0x0b ,0x01 ,HDA_INPUT ), +HDA_CODEC_MUTE ("Front Mic Playback Switch" ,0x0b ,0x01 ,HDA_INPUT ), +HDA_CODEC_VOLUME ("Front Mic Boost" ,0x19 ,0 ,HDA_INPUT ), + { }/* end */ +}; + +static struct hda_verb alc262_tyan_verbs[] = { +/* Headphone automute */ + {0x1b ,AC_VERB_SET_UNSOLICITED_ENABLE ,AC_USRSP_EN |ALC880_HP_EVENT }, + {0x1b ,AC_VERB_SET_PIN_WIDGET_CONTROL ,PIN_HP }, + {0x15 ,AC_VERB_SET_CONNECT_SEL ,0x00 }, + +/* P11 AUX_IN, white 4-pin connector */ + {0x14 ,AC_VERB_SET_PIN_WIDGET_CONTROL ,PIN_IN }, + {0x14 ,AC_VERB_SET_CONFIG_DEFAULT_BYTES_1 ,0xe1 }, + {0x14 ,AC_VERB_SET_CONFIG_DEFAULT_BYTES_2 ,0x93 }, + {0x14 ,AC_VERB_SET_CONFIG_DEFAULT_BYTES_3 ,0x19 }, + + {} +}; + +/* unsolicited event for HP jack sensing */ +static void alc262_tyan_automute (struct hda_codec *codec) +{ +unsigned int mute; +unsigned int present; + +snd_hda_codec_read (codec,0x1b ,0 ,AC_VERB_SET_PIN_SENSE ,0 ); + present =snd_hda_codec_read (codec,0x1b ,0 , +AC_VERB_GET_PIN_SENSE ,0 ); + present = (present &0x80000000 ) !=0 ; +if (present) { +/* mute line output on ATX panel */ +snd_hda_codec_amp_stereo (codec,0x15 ,HDA_OUTPUT ,0 , +HDA_AMP_MUTE ,HDA_AMP_MUTE ); + }else { +/* unmute line output if necessary */ + mute =snd_hda_codec_amp_read (codec,0x1b ,0 ,HDA_OUTPUT ,0 ); +snd_hda_codec_amp_stereo (codec,0x15 ,HDA_OUTPUT ,0 , +HDA_AMP_MUTE , mute); + } +} + +static void alc262_tyan_unsol_event (struct hda_codec *codec, +unsigned int res) +{ +if ((res >>26 ) !=ALC880_HP_EVENT ) +return ; +alc262_tyan_automute (codec); +} +#define alc262_capture_mixer alc882_capture_mixer#define alc262_capture_alt_mixer alc882_capture_alt_mixer@@ -10534,6 +10596,7 @@ static const char *alc262_models[ALC262_MODEL_LAST] = { [ALC262_ULTRA] = "ultra", [ALC262_LENOVO_3000] = "lenovo-3000", [ALC262_NEC] = "nec", + [ALC262_TYAN] = "tyan", [ALC262_AUTO] = "auto", };@@ -10574,6 +10637,7 @@ static struct snd_pci_quirk alc262_cfg_tbl[] = {SND_PCI_QUIRK (0x1179 ,0xff7b ,"Toshiba S06" ,ALC262_TOSHIBA_S06 ),SND_PCI_QUIRK (0x10cf ,0x1397 ,"Fujitsu" ,ALC262_FUJITSU ),SND_PCI_QUIRK (0x10cf ,0x142d ,"Fujitsu Lifebook E8410" ,ALC262_FUJITSU ), +SND_PCI_QUIRK (0x10f1 ,0x2915 ,"Tyan Thunder n6650W" ,ALC262_TYAN ),SND_PCI_QUIRK (0x144d ,0xc032 ,"Samsung Q1 Ultra" ,ALC262_ULTRA ),SND_PCI_QUIRK (0x144d ,0xc039 ,"Samsung Q1U EL" ,ALC262_ULTRA ), SND_PCI_QUIRK(0x144d, 0xc510, "Samsung Q45", ALC262_HIPPO),@@ -10792,6 +10856,19 @@ static struct alc_config_preset alc262_presets[] = { .unsol_event = alc262_hippo_unsol_event, .init_hook = alc262_hippo_automute, }, + [ALC262_TYAN] = { + .mixers = { alc262_tyan_mixer }, + .init_verbs = { alc262_init_verbs, alc262_tyan_verbs}, + .num_dacs = ARRAY_SIZE(alc262_dac_nids), + .dac_nids = alc262_dac_nids, + .hp_nid = 0x02, + .dig_out_nid = ALC262_DIGOUT_NID, + .num_channel_mode = ARRAY_SIZE(alc262_modes), + .channel_mode = alc262_modes, + .input_mux = &alc262_capture_source, + .unsol_event = alc262_tyan_unsol_event, + .init_hook = alc262_tyan_automute, + }, };static int patch_alc262 (struct hda_codec *codec)